International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169

Volume: 6 Issue: 6 73 - 76
______________________________________________________________________________________
Paper on Design and Analysis of Wheel Set Assembly & Disassembly Hydraulic
Press Machine

Mr. Sagar M. Gabhane1 and Prof.Ritesh D. banpurkar2

1
MTECH Student of Mechanical Engineering Department
AbhaGaikwadPatil College of EngineeringNagpur, Maharashtra, India
2
H.O.D. Mechanical Engineering Department
Abha GaikwadPatil College of Engineering Nagpur, Maharashtra, India

Abstract:- The wheels of the train are the part that carries the maximum static load, high axle load, high speeds, shocks and extreme weather
conditions which expose them to and wear and tear which ultimately leads to failure.
It is necessary for the railway department to maintain the wheels assembly for the safety and optimum working as defective wheel increases the
risk of a train derailment.
The wheels undergo periodic maintenance, and visual inspection is also carried out every day.To test the life and condition of the wheels special
not destructive tests are carried out in every 18 months.
This project is an industrial project for AI ENGINEERING ENTERPRISES. It involves the design and analysis of Hydraulic Press Machine
which is used to assemble & dissemble the locomotive wheel set.
In this part of paper we studied the different literatures for gaining the deep knowledge and also studying the work which was done related to our
project.

Keywords: HydraulicPress,CAD,Hypermesh.
__________________________________________________*****_________________________________________________

I. Introduction process is carried out on 100 tons old hydraulic press to

mount and unmounts the wheel over the axle. This process
The hydraulic press is one of the oldest of the basic requires more labors and time.
machine tools. In its modern form, it is well adapted to Thus this old machine need to be replaced, So we design the
presswork, ranging from coining jewelry to forging aircraft hydraulic press machine without changing hydraulic capacity
parts. Modern hydraulic presses are, in some cases, better to automate this process, to save time and minimize the
suited to applications where the mechanical press has been human effort by using CAD and FEA techniques.
traditionally more popular. Existing Press machine
The mechanical press has been the first choice of many press  Wheel set lifting mechanism is manually operated
users for years. The training of tool and die makers and process as shown below.
manufacturing engineers in North America has been oriented  During assemble or dissemble wheels are
toward applying mechanical presses to sheet-metal press constrained with the vertical members of machine.
working.
 Wheel set either lifted by screw jack or mounted on
Modern hydraulic presses offer good performance and
the vertical member as shown below.
reliability. Widespread application of other types of hydraulic
power equipment in manufacturing requires maintenance
technicians who know how to service hydraulic components.
New fast acting valves, electrical components, and more
efficient hydraulic circuits have enhanced the performance
capability of hydraulic presses.
This project is mainly based on the design and analysis of
100tonne hydraulic press which can be used to assemble and
dissemble the wheel set assembly. The necessary data will be
accumulated from the company.
II. Problem Formulation

In Nagpur railway workshop the maintenance of locomotive

performs regularly. Railway wheel sets are dissembled for
maintenance and at final stage assembled again. As per the
discussion it is found that the assembling and dissembling
73
IJRITCC | June 2018, Available @ http://www.ijritcc.org
_______________________________________________________________________________________
International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169
Volume: 6 Issue: 6 73 - 76
______________________________________________________________________________________
design a horizontal press machine as a special purpose
machine tool.
IV. DESIGN CALCULATION

Input Data:
Solid Shaft,
diameter = 89 mm
Tolerance limit = 0.01 to 0.03 mm
Wheel,
hub inner diameter = 89 mm
Fig.1: Existing Hydraulic Press
hub outer diameter = 130 mm
The above shown 100 tons old hydraulic press to mount and
width of hub = 190 mm
un mounts the wheel over the axle Nagpur railway workshop
Tolerance limit = 0 to 0.019 mm
is facing the above stated problem in their workshop premises
III. Literature Review
1) Press Fit Force Calculation
Mohamad M. Saleh [1]This paper describes the systematic 𝐹𝑝 = 𝑃 × 𝜇 × 𝑑 × 𝜋 × 𝐿
procedure for investigating the performance and the design 𝐹𝑝 = Press fit Force (N)
analysis of the welded structure of a 150-tonne hydraulic 𝜇 = Friction between shaft and hub
press machine. This machine was designed by ENERPAC d = Nominal Diameter of joint (mm)
without any measurement or variable hydraulic system. The L = Length of the joint (mm)
investigation discusses the theoretical and experimental model P = pressure of contact (N/mm2)
of the machine to establish the accurately optimal design 𝐼
𝑃=
analysis and further development of the present machine at 𝑑 𝑑 𝑜 2 +𝑑 2 𝑑 𝑑 2 +𝑑 2
× 2 2 + 𝑣𝑜 + × 𝑖2 2 − 𝑣𝑖
minimum time and lower cost. The applicability of the 𝐸𝑜 𝑑 𝑜 −𝑑 𝐸𝑖 𝑑 −𝑑 𝑖

existing PC based FE package, as a computer aided design

tool, was also investigated. I = interference between hub and shaft (0.015 mm)
MalachySumaila, d = Nominal hub diameter (89 mm)
AkiiOkonigbonAkaehomenIbhadode[2]A 30-ton hydraulic Eo and Ei = Youngs modulus of wheel and shaft (206000
press was desgined, constructed and tested using locally MPa)
sourced materials. The principal parameters of the design do = Hub outer diameter (130 mm)
included the maximum load (300 kN), the distance the load vo and vi = Poisson's ration of Hub and shaft (0.3)
resistance has to move (piston stroke, 150 mm), the system di = Shaft internal diameter (0 mm)
pressure, the cylinder area (piston diameter = 100 mm) and 0.015
𝑃 = 89 130 2 +89 2 89 0 2 +89 2
the volume flow rate of the working fluid. The major × 2 2 + 0.3 + × 2 2 − 0.3
206000 130 −89 206000 89 −0
components of the press designed include the cylinder and 𝑃 = 30.74 𝑀𝑃𝑎
piston arrangement, the frame and the hydraulic circuit. The 𝐹𝑝 = 30.74 × 0.3 × 89 × 𝜋 × 190
machine was tested for performance with a load of 10 kN
𝐹𝑝 = 489912.58 𝑁
provided by two compression springs of constant 9 N/mm
𝐹𝑜𝑟𝑐𝑒 = 𝑚𝑎𝑠𝑠 × 𝑎𝑐𝑐𝑒𝑙𝑒𝑟𝑎𝑡𝑖𝑜𝑛
each arranged in parallel between the upper and lower platens
Hydraulic cylinder capacity in tons = Total force /
and was found to be satisfactory.
acceleration
Priyanka S. Dighade[3]In this project design and analysis of
489912.58
horizontal hydraulic press machine for assembling and 𝐻𝑦𝑑𝑟𝑎𝑢𝑙𝑖𝑐 𝑐𝑎𝑝𝑎𝑐𝑖𝑡𝑦 = = 49.9 𝑡𝑜𝑛 ≅ 50 𝑡𝑜𝑛
9810
dismantling of heavy parts such as couplings, shafts and 50 Ton hydraulic force is required for assembling and
bearing etc. is to be performed. The primary reason for dismantling wheels from the wheel axle .
selecting this project is that it is very inconvenient to perform
such operation on regular vertical press machines. Thus there
4.1 CAD Modelling:
is an urgent need to design a horizontal press machine as a SolidWorks is a solid modeling computer-aided design
special purpose machine tool. During the visit to for G.S. (CAD) and computer-aided engineering (CAE) computer
Industries, It was discussed that the company works on repair, program that runs on Microsoft Windows. SolidWorks is
maintenance and overhauling of heavy engineering equipment. published by Dassault Systèmes.
There is a regular need of assembling and dismantling of
heavy parts such as couplings, shafts and bearing etc. it is
very inconvenient to perform such operation on regular
vertical press machines. Thus there is an urgent need to
74
IJRITCC | June 2018, Available @ http://www.ijritcc.org
_______________________________________________________________________________________
International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169
Volume: 6 Issue: 6 73 - 76
______________________________________________________________________________________
Forces:
1) Force applied due to load of axle
2.5 Tonn=2500×9.81= 24525N
2) Force applied due to wheel
50 Tonn =50000×9.81= 490500N
3) Hydraulic force acting on piston and cylinder
50 Tonn =50000×9.81= 490500N

Figure 2 CAD MODEL OF PRESS MACHINE

Figure 5 ANALYSIS AERA

Figure 3 Dimension of CAD Model

4.2 FEA ANALYSIS

Figure 6 Deformation Counter of Machine

Figure 7 Deformation Counter of Frame

Figure 4 Loading Condition on Press Machine

75
IJRITCC | June 2018, Available @ http://www.ijritcc.org
_______________________________________________________________________________________
International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169
Volume: 6 Issue: 6 73 - 76
______________________________________________________________________________________
214MPa and maximum stress developed in press machine bed
is 64.3MPa.
Yield stress of structure material is 360.5 MPa.

References

[1] Mohamad M. Saleh “Design Study of A Heavy Duty

Hydraulic Machine Using Finite Element Techniques”,
Scientific Studies and Research Center, Damascus, Syria.
August 1992
[2] MalachySumaila and AkiiOkonigbonAkaehomenIbhadode
Figure 8 Deformation Counter of Press machine “Design and Manufacture of a 30-ton Hydraulic Press”,
AU J.T. 14(3): 196-200 (Jan. 2011)
[3] Priyanka S. Dighade, Dr. S. K. Choudhary, Prof. V. D.
Dhopte Design of Horizontal Hydraulic Press Machine for
G. S. Industries, MIDC, Kamptee Road, Nagpur - A
Review, IJSRD - International Journal for Scientific
Research & Development| Vol. 5, Issue 04, 2017 | ISSN
(online): 2321-0613
[4] Arun V. Javir, Niranjan N. Manchekar, Rahul D. Belekar
UPGRADATION IN HYDRAULIC PRESS MACHINE
International Journal of Advance Research In Science And
Engineering http://www.ijarse.com IJARSE, Vol. No.3,
Issue No.11, November 2014 ISSN-2319-8354.
Figure 9 Stress counter of machine [5] S.M. Salehi, G.H. Farrahi, S. Sohrabpoor, R.
MasoudiNejad Life Estimation in the Railway Wheels
Unde r the Influence of Residual Stress Field, International
Journal of Railway Research, Vol.1, No1, pp 53-60 .
[6] LeonasPovilasLINGAITIS ,Šarūnas MIKALIŪNAS,
Gediminas VAIČIŪNAS” THE ANALYSIS OF WEAR
INTENSITY OF THE LOCOMOTIVE WHEEL – SETS”.
[7] Dr. Ing T. Hong, P.E. President BarDyne, Inc. Stillwater,
Oklahoma U.S.A. Dr. Richard K. Tessmann, P.E. Vice
President FES, Inc. Stillwater, Oklahoma
U.S.A.Computerized Design Analysis of Machine Tool
Hydraulic System Dynamics.
[8] Increasing and Sustaining Heavy Haul Wheel Set
Maintenance Operations through Computer Controlled
Integrated Manufacturing David William Davis Eric S.
Butler,Michael Chu Roger D. Collen James Otton
Simmons Machine Tool Corporation, Albany, New York
division of Niles-Simmons Hegenscheidt Group.
[9] ASIM M.KAMATE “Design, Development and Analysis
of A 20Ton Hydraulic Press”Mechanical Department
V. Conclusion D.Y.Patil Technical Campus Talsande Kolhapur.
[10] ChauhanDipeshkumar “Design and Analysis of
Force applied due to load of axle is 24525N. Hydraulic force
mechanical press frame”.
acting on piston and cylinder is 490500N. To check the
effects of maximum forces on the designed structure a Linear
static Analysis is carried out by using Finite Element Analysis
Technique.
From the Results of FE analysis it is observed that structure is
deformed by 0.27mm, the Base is deformed by 0.123mm, the
side support is deformed by 0.278mm, the press machine bed
is deformed by 0.183mm and maximum stresses developed in
structure is 328 Mpa, maximum stress developed in base is
328MPa, maximum stress developed in side support is

76
IJRITCC | June 2018, Available @ http://www.ijritcc.org
_______________________________________________________________________________________