Scribd Logo
Upload

Welcome to Scribd!

  • 275 views

    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Uploaded by

    PAOLO GIANNELLI
    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Uploaded by

    PAOLO GIANNELLI
    275 views6 pages
    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    275 views6 pages

    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Uploaded by

    PAOLO GIANNELLI
    ISO10816-6 Reciprocating Machine Above 100 KW 1995 - AMD 1 2015

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    INTERNATIONAL ISO

    STANDARD 10816-6

    First edition
    1995-12-15
    AMENDMENT1
    2015-04--01

    Mechanical vibration - Evaluation of


    machine vibration by measurements
    on non-rotating parts -
    Part 6:
    Reciprocating machines with power
    ratings above 100 kW
    AMENDMENT 1
    Vibrations mecaniques - Evaluation des vibrations des machines par
    mesurages sur les parties non tournantes -
    Partie 6: Machines alternatives de puissance nominale super/eure a
    lOOl<W
    AMEN DEMENT 1

    Reference number
    ISO 10816-6:1995/Amd.1:2015(E)

    © ISO 2015
    ISO 10816·6:1995/Amd.1:2015(E)

    COPYRIGHT PROTECTED DOCUMENT


    © [SO2015
    All rights reserved. Unl ess othervvise specified, no part of thi s publication may be reproduced or utilized other.vise in any form
    or by a ny means, e lectronic or mechan ical, l11cluding photocopying, or posting on the internet or an Intranet. without prior
    wri tten permission. Permiss ion can be reques ted from either ISO a t the address below or IS0's member body in the co un try of
    the requester.
    ISO copyrigb t office
    Case postale 56 • CH-1211 Genev11 20
    Tel.+ 4122 749 0111
    Fax+ 4122 749 09 47
    E-mail [email protected]
    Web www.iso.org
    Puh li shed in Switzerland

    ii © ISO 2015 - AII rights reserved


    JSO 10816~6:1995/Amd.1:2015(E)

    Foreword
    ISO (the International Organization for Standardization) is a world wide federation ofnationa I standards
    bodjes (ISO member bodies). The work of preparing International Standards is normally carried out
    through ISO technical committees. Each member body interested in a subject for which a technical
    committee has been established has the right to be represented on that committee. International
    organizations, governmental and non·governmentaI, in liai son with ISO, also take part in the work.
    ISO collaborates closely with the lnternationaJ Electrotechnical Commission (!EC) on a ll matters of
    electrotechnical standardization.
    The procedures used to develop this document and those intended for its further maintenance are
    de.scribed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for he
    different types of ISO documents s hou ld be noted. This document was drafted in accordance with the
    editorial rules of the ISO/JEC Directives, Part 2 (see www iso org/directiyes).
    Attention is drawn to the possibility that some of the elements of this document may be the .subject of
    patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
    patent rights identified d uring he development of the document will be in the Introduction and/or on
    the ISO list of patent declarations received [see www.iso.org/patents).
    Any trade name used in this document is information given for the convenience of users and does not
    constitute an endorsement.
    For an explanation on the meaning of ISO specific terms and expressions related to conformity
    assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers
    to Trade (TBT), see the following URL: Foreword - Supplementary information.
    The committee responsible for this document is ISO/TC 108, Mechanical vibration, shock and condition
    monitoring, Subcommittee SC 2, Measurement and evaluation of mechanical vibration and shock as applied
    to machines,. vehicles and structures.

    © ISO 2015 - All righ ts reserved iii


    JSO 10816-6:1995/Amd.1:2015(E)

    Mechanical vibration - Evaluation of machine vibration


    by measurements on non-rotating parts -
    Part 6:
    Reciprocating machines with power ratings above 100 kW
    AMENDMENT 1
    Page ii, Foreword, replace the list by the following:

    Part 1: General guidelines

    Part 2;· Land-based steam turbines and generators in excess of 50 MW with normal operatirw speeds of
    1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

    Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/m/n
    and 15000 r/min when measured in situ

    Part 4: Gas turbine sets with fluidfilm bearings

    Part 5: Machine sets in hydraulic power generating and pumping plants

    Part 6: Reciprocating machines with power ratings above 100 kW

    Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts

    Part 8: Reciprocating compressor systems

    Part 21 : Horizontal axis wind turbines with gearbox

    Page 1, Clause 1, 2nd paragraph:

    Replace "gas compressors" by "reciprocating pumps".

    Page 1, Clause 1, replace the last paragraph by the following:

    This part of ISO 10816 does not apply to


    a) machines installed in road vehicles (e.g. trucks, passenger cars, self-propelled construction
    machinery, trac tors);

    b) reciprocating compressors.
    NOTE For reciprocating compr essors, see ISO 10816-8.

    Page 1, Clause 2, replace the clause by the following;

    The follow ing documents, in w hole or in part, are normatively referenced in this document and are
    indi spe nsable for its applica t ion. For dated references,. only t he edition cited applies. For und ated
    references, the latest edition of the referenced document (in cl uding any amendments) applies.
    ISO 2041, Mechanical vibration, shock and condition monitoring - Vocabulary

    P09e 2, Note 1, r eplace the Note by:


    NOTE 1 ISO 2041 includes three notes in the above definit ion. Notes 2 and 3 are not applicable to this part
    of ISO 10816.

    © ISO 2015 - All rights reserved 1


    ISO 10816·6:1995/Amd.1:2015(E)

    Page 7, B.2:
    Replace "compressor" by "pump".
    Page 10, Annex D, replace the Bibliography by the fo llowing:
    [1] ISO 2017 (all parts), Mechanical vibration and shock - Resilient mounting systems
    [2] ISO 2954, Mechanical vibration of rotating and reciprocating machinery - Requirements for
    instruments for measuring vibration severity
    (3) ISO 4866, Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the
    measurement of vibrations and evaluation of their effects on structures
    [4] ISO 5348, Mechanical vibration and shock - Mechanical mounting of accelerometers
    [5] ISO 8528-9, Reciprocating internal combustion engine driven alternating current generating sets
    - Part 9: Measurement and evaluation of mechanical vibrations

    2 © ISO 2015 - All rights reserved


    ISO 10816·6:1995/Amd.1:2015(E)

    lCS 17.160; 21.240


    Price based on 2 pages

    © ISO 201 5 - All rights reserved

    You might also like