Scribd
Upload
152 views1 page

Redboard (Dev-12757) : ISP Header

The document provides details on the Arduino Uno board, including an overview of its microcontroller, voltage rails, input/output pins and their functions. Key specifications listed include an ATmega328 microcontroller, 32kB of flash memory, analog/digital pins that can be used for PWM, analog input, and digital I/O, and an operating voltage of 7-12V. The pinout diagram shows the mapping of microcontroller pins to the board's physical pins for power, communication, and programming interfaces.

Uploaded by

Vengatesh Velusamy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
152 views1 page

Redboard (Dev-12757) : ISP Header

The document provides details on the Arduino Uno board, including an overview of its microcontroller, voltage rails, input/output pins and their functions. Key specifications listed include an ATmega328 microcontroller, 32kB of flash memory, analog/digital pins that can be used for PWM, analog input, and digital I/O, and an operating voltage of 7-12V. The pinout diagram shows the mapping of microcontroller pins to the board's physical pins for power, communication, and programming interfaces.

Uploaded by

Vengatesh Velusamy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Reset

SCK
MISO
Reset
D13
D12
PB5
PB4
SCK
MISO
PCINT5

PCINT4
LED Redboard (Dev-12757)
Programmed with Arduino (Uno) Name ADC

16MHz Power PWM


ISP header
GND Serial

Control Ext Interrupt


VCC VCC
MOSI D11 PB3 8-bit MOSI PCINT3 OC2A
MiniB USB Arduino PC Interrupt
GND GND

Reset Button
Port Misc

SCL A5/D19 PC5 ADC5 SCL PCINT13


SDA A4/D18 PC4 ADC4 SDA PCINT12
AREF AREF
GND GND
NC 13 D13 PB5 SCK PCINT5 LED
IOREF IOREF 12 D12 PB4 MISO PCINT4
PCINT14 PC6 Reset RST 11 D11 PB3 8-bit MOSI PCINT3 OC2A
3.3V 3.3V 10 D10 PCB2 8-bit SS PCINT2 OC1B
5V 5V 9 D9 PB1 8-bit PCINT1 OC1A
GND GND 8 D8 PB0 PCINT0 ICP1 CLKO
GND GND
Vin Vin 7 D7 PD7 PCINT23 IN1
6 D6 PD6 8-bit PCINT22 OC0A AIN0
PCINT8 ADC0 PC0 A0/D14 A0 5 D5 PD5 8-bit PCINT21 OC0B T1
PCINT9 ADC1 PC1 A1/D15 A1 4 D4 PD4 PCINT20 T0 XCK
PCINT10 ADC2 PC2 A2/D16 A2 3 D3 PD3 8-bit INT1 PCINT19 OC2B
PCINT11 ADC3 PC3 A3/D17 A3 2 D2 PD2 INT0 PCINT18
PCINT12 SDA ADC4 PC4 A4/D18 A4 TX0->1 D1 PD1 TXD PCINT17
PCINT13 SCL ADC5 PC5 A5/D19 A5 RX<-0 D0 PD0 RXD PCINT16

ISP header

Power ATMega328
Absolute maxiumum VCC: 6V
LEDs
VIN:7V-15V Maximum current for chip: 200mA Power: Green
VCC:5V Maximum current per pin: 40mA
Recommended current per pin:20mA User (D13): Blue
Maximum current: 800mA on 5V line 8-bit Atmel AVR RX: Yellow
150mA on 3.3V line Flash Program Memory: 32kB
EEPROM: 1kB TX: Red
Internal SRAM 2kB
ADC:10-bit
PWM:8bit

You might also like