Scribd Logo
Upload

Welcome to Scribd!

  • 95 views

    Ngwk-0025-Enpn-Mtpn-7530-D03 (Water Pipelines-Material Take Off For) PDF

    Uploaded by

    stdshop
    This document provides a material takeoff for polyethylene pipe for the West Karoun Area NGL 3200 Project. It lists 3 items of high density polyethylene pipe of various diameters, thickness, and pressure ratings totaling 39,744 meters needed for the project. The polyethylene pipe meets DIN 8074 standards and is rated for pressures between 5.5 and 9.2 barg and a design temperature of 40°C. The vendor must confirm the suitability of the pipes for the specified design conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ngwk-0025-Enpn-Mtpn-7530-D03 (Water Pipelines-Material Take Off For) PDF

    Uploaded by

    stdshop
    95 views4 pages
    This document provides a material takeoff for polyethylene pipe for the West Karoun Area NGL 3200 Project. It lists 3 items of high density polyethylene pipe of various diameters, thickness, and pressure ratings totaling 39,744 meters needed for the project. The polyethylene pipe meets DIN 8074 standards and is rated for pressures between 5.5 and 9.2 barg and a design temperature of 40°C. The vendor must confirm the suitability of the pipes for the specified design conditions.

    Original Title

    NGWK-0025-ENPN-MTPN-7530-D03(WATER PIPELINES-MATERIAL TAKE OFF FOR).pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a material takeoff for polyethylene pipe for the West Karoun Area NGL 3200 Project. It lists 3 items of high density polyethylene pipe of various diameters, thickness, and pressure ratings totaling 39,744 meters needed for the project. The polyethylene pipe meets DIN 8074 standards and is rated for pressures between 5.5 and 9.2 barg and a design temperature of 40°C. The vendor must confirm the suitability of the pipes for the specified design conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    95 views4 pages

    Ngwk-0025-Enpn-Mtpn-7530-D03 (Water Pipelines-Material Take Off For) PDF

    Uploaded by

    stdshop
    This document provides a material takeoff for polyethylene pipe for the West Karoun Area NGL 3200 Project. It lists 3 items of high density polyethylene pipe of various diameters, thickness, and pressure ratings totaling 39,744 meters needed for the project. The polyethylene pipe meets DIN 8074 standards and is rated for pressures between 5.5 and 9.2 barg and a design temperature of 40°C. The vendor must confirm the suitability of the pipes for the specified design conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    West Karoun Area NGL 3200 Project

    Water Pipelines-Material Take Off For Line Pipe

    PROJ. UNIT DISC. DOC. SEQ. REV. Class: 3


    Page: 1 of 4
    NGWK 0025 ENPN MTPN 7530 D03 Status: AFC

    WATER PIPELINES-MATERIAL TAKE OFF FOR


    LINE PIPE

    Contract No. : ‫ن‬.‫ت‬.‫ – م‬91 – 754 Date: 20/01/2013


    Client : Petroleum Engineering & Development Company (PEDEC)
    Site Location :

    M. M. M. J. M.
    D03 06/07/2015 Approved For Construction Mesbahzadeh Jazayeri
    Roshanali Amini Sakhaie
    M. M. M. J. M.
    D02 30/05/2015 Approved For Construction Mesbahzadeh Jazayeri
    Roshanali Amini Sakhaie
    M. M. M. P. M.
    D01 09/05/2015 Approved For Construction Mesbahzadeh Heydari
    Roshanali Amini Sakhaie
    M. M. M. P. M.
    D00 18/04/2015 Issued For Information Mesbahzadeh Heydari
    Roshanali Amini Sakhaie
    Contractor’s PEDEC
    Rev. Issue Date Purpose of Issue Prepared Checked Approved
    Approval Approval
    West Karoun Area NGL 3200 Project

    Water Pipelines-Material Take Off For Line Pipe

    PROJ. UNIT DISC. DOC. SEQ. REV. Class: 3


    Page: 2 of 4
    NGWK 0025 ENPN MTPN 7530 D03 Status: AFC

    TABLE OF REVISED PAGE

    REVISION REVISION REVISION


    PAGE PAGE PAGE
    D00 D01 D02 D03 D04 D05 D06 D00 D01 D02 D03 D04 D05 D06 D00 D01 D02 D03 D04 D05 D06
    1 X 40 79
    2 X 41 80
    3 X 42 81
    4 X X X 43 82
    5 44 83
    6 45 84
    7 46 85
    8 47 86
    9 48 87
    10 49 88
    11 50 89
    12 51 90
    13 52 91
    14 53 92
    15 54 93
    16 55 94
    17 56 95
    18 57 96
    19 58 97
    20 59 98
    21 60 99
    22 61 100
    23 62 101
    24 63 102
    25 64 103
    26 65 104
    27 66 105
    28 67 106
    29 68 107
    30 69 108
    31 70 Appendix
    32 71 1 X
    33 72 2 X
    34 73 3
    35 74 4
    36 75 5
    37 76 6
    38 77 7
    39 78 8
    West Karoun Area NGL 3200 Project

    Water Pipelines-Material Take Off For Line Pipe

    PROJ. UNIT DISC. DOC. SEQ. REV. Class: 3


    Page: 3 of 4
    NGWK 0025 ENPN MTPN 7530 D03 Status: AFC

    1. MATERIAL TAKE OF FOR POLYETHYLENE PIPE ....................................................... 4


    West Karoun Area NGL 3200 Project

    Water Pipelines-Material Take Off For Line Pipe

    PROJ. UNIT DISC. DOC. SEQ. REV. Class: 3


    Page: 4 of 4
    NGWK 0025 ENPN MTPN 7530 D03 Status: AFC

    1. MATERIAL TAKE OF FOR POLYETHYLENE PIPE


    D03

    ITEM OD THICKNESS
    TYPE DESCRIPTION SDR Unit QTY
    NO. (mm) (mm)
    HDPE PIPE-DIN 8074-PE 100,
    1 PIPE Design pressure: 5.5 barg, 250 14.8 17 Meters 13248
    Design temperature: 40°C
    HDPE PIPE-DIN 8074-PE 100,
    2 PIPE Design pressure: 7.6 barg, 200 18.2 11 Meters 13248
    Design temperature: 40°C
    HDPE PIPE-DIN 8074-PE 100,
    3 PIPE Design pressure: 9.2 barg, 140 15.7 9 Meters 13248
    Design temperature: 40°C

    Note: Vendor shall confirm suitability of pipes for the mentioned design condition.

    You might also like