0% found this document useful (0 votes)

65 views13 pages

Design Calculation of Pile Load Test I-Beam: Fig: Loading On The I Section

The document describes the design calculation of a pile load test on an I-beam structure. It includes figures showing the loading on the I-beam section and design unity check ratios. Tables provide summaries of node displacements, beam displacements, beam end displacements, and beam end forces for the structure under a primary load case. The analysis was performed by an engineer for a specific project.

Uploaded by

A.K.M Shafiq Mondol

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

65 views13 pages

Design Calculation of Pile Load Test I-Beam: Fig: Loading On The I Section

Uploaded by

A.K.M Shafiq Mondol

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 13

Design Calculation of pile load test I-beam

Fig: Loading on the I section

Fig: Section information

Fig: Design Unity check ratio

Job Information

Engineer Checked Approved

Name: A.K.M Shafiq Mondol

Date: 07-Jul-18

Project ID
Project Name

Structure Type SPACE FRAME

Number of Nodes 5 Highest Node 5

Number of Elements 4 Highest Beam 4

Number of Basic Load Cases -2

Number of Combination Load Cases 0

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name

Primary 1 LOAD
Node Displacement Summary

X Y Z Resultant rX rY
Node L/C
(in) (in) (in) (in) (rad) (rad)

Max X 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00

Min X 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max Y 3 1:LOAD 0.000 0.000 0.000 0.000 0.000 0.00
Min Y 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max Z 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Min Z 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max rX 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Min rX 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max rY 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Min rY 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max rZ 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Min rZ 2 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00
Max Rst 1 1:LOAD 0.000 -0.675 0.000 0.675 0.000 0.00

Beam Displacement Detail Summary

Displacements shown in italic indicate the presence of an offset

d X Y Z Resultant
Beam L/C
(ft) (in) (in) (in) (in)

Max X 3 1:LOAD 9.916 0.000 -0.592 0.000 0.592

Min X 3 1:LOAD 7.712 -0.000 -0.428 0.000 0.428
Max Y 4 1:LOAD 0.853 0.000 0.005 0.000 0.005
Min Y 1 1:LOAD 0.000 0.000 -0.675 0.000 0.675
Max Z 1 1:LOAD 0.000 0.000 -0.675 0.000 0.675
Min Z 1 1:LOAD 0.000 0.000 -0.675 0.000 0.675
Max Rst 1 1:LOAD 0.000 0.000 -0.675 0.000 0.675

Beam End Displacement Summary

Displacements shown in italic indicate the presence of an offset

X Y Z Resultant
Beam Node L/C
(in) (in) (in) (in)

Max X 1 1 1:LOAD 0.000 -0.675 0.000 0.675

Min X 1 1 1:LOAD 0.000 -0.675 0.000 0.675
Max Y 1 5 1:LOAD 0.000 0.000 0.000 0.000
Min Y 1 1 1:LOAD 0.000 -0.675 0.000 0.675
Max Z 1 1 1:LOAD 0.000 -0.675 0.000 0.675
Min Z 1 1 1:LOAD 0.000 -0.675 0.000 0.675
Max Rst 1 1 1:LOAD 0.000 -0.675 0.000 0.675

Beam End Force Summary

The signs of the forces at end B of each beam have been reversed. For example: this means that the Min Fx entry gives the largest
tension value for an beam.

Axial Shear Torsion Bend

Fx Fy Fz Mx My
Beam Node L/C
(lb) (lb) (lb) (kip-in) (kip-in)

Max Fx 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000

Min Fx 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Max Fy 4 5 1:LOAD 0.000 40.9E 3 0.000 0.000 0.000
Min Fy 2 4 1:LOAD -0.000 -40.9E 3 -0.000 -0.000 -0.000
Max Fz 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Min Fz 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Max Mx 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Min Mx 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Max My 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Min My 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000
Max Mz 1 5 1:LOAD -0.000 -17E 3 -0.000 -0.000 -0.000
Min Mz 1 1 1:LOAD 0.000 -0.000 0.000 0.000 0.000

Beam Force Detail Summary

Sign convention as diagrams:- positive above line, negative below line except Fx where positive is compression. Distance d is given
from beam end A.

Axial Shear Torsion B

d Fx Fy Fz Mx My
Beam L/C
(ft) (lb) (lb) (lb) (kip-in) (kip-in)

Max Fx 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00

Min Fx 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Max Fy 4 1:LOAD 0.000 0.000 40.9E 3 0.000 0.000 0.00
Min Fy 2 1:LOAD 2.133 -0.000 -40.9E 3 -0.000 -0.000 -0.00
Max Fz 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Min Fz 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Max Mx 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Min Mx 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Max My 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Min My 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00
Max Mz 1 1:LOAD 11.017 -0.000 -17E 3 -0.000 -0.000 -0.00
Min Mz 1 1:LOAD 0.000 0.000 -0.000 0.000 0.000 0.00

Beam Combined Axial and Bending Stresses Summary

Max Comp Max Tens
Length Stress d Stress d
Beam L/C Corner Corner
(ft) (psi) (ft) (psi) (ft)

1 1:LOAD 11.017 21.2E 3 11.017 3 -21.2E 3 11.017

2 1:LOAD 2.133 21.2E 3 2.133 3 -21.2E 3 2.133
3 1:LOAD 11.017 21.2E 3 0.000 3 -21.2E 3 0.000
4 1:LOAD 2.133 21.2E 3 0.000 3 -21.2E 3 0.000

Steel Design (Track 2) Beam 1 Check 1

|--------------------------------------------------------------------------|

| Y PROPERTIES |

|************* | IN INCH UNIT |

| * |=============================| ===|=== ------------ |

|MEMBER 1 * | AISC SECTIONS | | AX = 12.50 |

| * | TAP ERED | | --Z AY = 5.56 |

|DESIGN CODE * | | | AZ = 4.39 |

| AISC-1989 * =============================== ===|=== SY = 6.45 |

| * SZ = 53.00 |

| * |<---LENGTH (FT)= 11.02 --->| RY = 1.23 |

|************* RZ = 5.41 |

| |

| 93.6 (KIP-FEET) |

|PARAMETER | L1 STRESSES |

|IN KIP INCH | L1 IN KIP INCH |

|--------------- + -------------|

| KL/R-Y= 107.15 | L1 FA = 12.05 |

| KL/R-Z= 24.46 + L1 fa = 0.00 |

| UNL = 132.21 | L1 FCZ = 21.44 |

| CB = 1.00 + FTZ = 21.60 |

| CMY = 0.85 | L1 L1 FCY = 27.00 |

| CMZ = 0.85 + L1 FTY = 27.00 |

| FYLD = 36.00 |L0 L1 L1 fbz = 21.20 |

| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |

| DFF = 0.00 -5.2 Fey = 13.01 |

| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 249.59 |

| (WITH LOAD NO.) FV = 14.40 |

| fv = 3.06 |

| |

| MAX FORCE/ MOMENT SUMMARY (KIP-FEET) |

| ------------------------- |

| |

| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |

| |

| VALUE 0.0 17.0 0.0 0.0 93.6 |

| LOCATION 0.0 11.0 0.0 0.0 11.0 |

| LOADING 0 1 0 0 1 |

| |

|**************************************************************************|

|* *|

|* DESIGN SUMMARY (KIP-FEET) *|

|* -------------- *|

|* *|

|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|

| FX MY MZ LOCATION |

| ====================================================== |

| PASS AISC- H1-3 9.886E-01 1 |

| 0.00 T 0.00 93.62 11.02 |

|* *|

|**************************************************************************|

| |

|--------------------------------------------------------------------------|
Steel Design (Track 2) Beam 2 Check 1

|--------------------------------------------------------------------------|

| Y PROPERTIES |

|************* | IN INCH UNIT |

| * |=============================| ===|=== ------------ |

|MEMBER 2 * | AISC SECTIONS | | AX = 12.50 |

| * | TAP ERED | | --Z AY = 5.56 |

|DESIGN CODE * | | | AZ = 4.39 |

| AISC-1989 * =============================== ===|=== SY = 6.45 |

| * SZ = 53.00 |

| * |<---LENGTH (FT)= 2.13 --->| RY = 1.23 |

|************* RZ = 5.41 |

| |

| 93.6 (KIP-FEET) |

|PARAMETER | L1 STRESSES |

|IN KIP INCH | L1 IN KIP INCH |

|--------------- + L1 L1 -------------|

| KL/R-Y= 20.74 | L1 FA = 20.55 |

| KL/R-Z= 4.73 + fa = 0.00 |

| UNL = 25.59 | L1 L1 FCZ = 23.76 |

| CB = 1.00 + FTZ = 23.76 |

| CMY = 0.85 | L1 FCY = 27.00 |

| CMZ = 0.85 + L1 L1 FTY = 27.00 |

| FYLD = 36.00 |L1 fbz = 21.20 |

| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |

| DFF = 0.00 5.3 Fey = 347.21 |

| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez =6662.26 |

| (WITH LOAD NO.) FV = 14.40 |

| fv = 7.35 |

| |

| MAX FORCE/ MOMENT SUMMARY (KIP-FEET) |

| ------------------------- |

| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |

| |

| VALUE 0.0 40.9 0.0 0.0 93.6 |

| LOCATION 0.0 2.1 0.0 0.0 2.1 |

| LOADING 0 1 0 0 1 |

| |

|**************************************************************************|

|* *|

|* DESIGN SUMMARY (KIP-FEET) *|

|* -------------- *|

|* *|

|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|

| FX MY MZ LOCATION |

| ====================================================== |

| PASS AISC- H1-3 8.921E-01 1 |

| 0.00 T 0.00 93.62 2.13 |

|* *|

|**************************************************************************|

| |

|--------------------------------------------------------------------------|
Steel Design (Track 2) Beam 3 Check 1

|--------------------------------------------------------------------------|

| Y PROPERTIES |

|************* | IN INCH UNIT |

| * |=============================| ===|=== ------------ |

|MEMBER 3 * | AISC SECTIONS | | AX = 12.50 |

| * | TAP ERED | | --Z AY = 5.56 |

|DESIGN CODE * | | | AZ = 4.39 |

| AISC-1989 * =============================== ===|=== SY = 6.45 |

| * SZ = 53.00 |

| * |<---LENGTH (FT)= 11.02 --->| RY = 1.23 |

|************* RZ = 5.41 |

| |

| 93.6 (KIP-FEET) |

|PARAMETER |L1 STRESSES |

|IN KIP INCH | L1 IN KIP INCH |

|--------------- + -------------|

| KL/R-Y= 107.15 | L1 FA = 12.05 |

| KL/R-Z= 24.46 + L1 fa = 0.00 |

| UNL = 132.21 | L1 FCZ = 21.44 |

| CB = 1.00 + FTZ = 21.60 |

| CMY = 0.85 | L1 L1 FCY = 27.00 |

| CMZ = 0.85 + L1 FTY = 27.00 |

| FYLD = 36.00 | L1 L1 L0 fbz = 21.20 |

| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |

| DFF = 0.00 -5.2 Fey = 13.01 |

| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez = 249.59 |

| (WITH LOAD NO.) FV = 14.40 |

| fv = 3.06 |

| |

| MAX FORCE/ MOMENT SUMMARY (KIP-FEET) |

| ------------------------- |

| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |

| |

| VALUE 0.0 17.0 0.0 0.0 93.6 |

| LOCATION 0.0 0.0 0.0 0.0 0.0 |

| LOADING 0 1 0 0 1 |

| |

|**************************************************************************|

|* *|

|* DESIGN SUMMARY (KIP-FEET) *|

|* -------------- *|

|* *|

|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|

| FX MY MZ LOCATION |

| ====================================================== |

| PASS AISC- H1-3 9.886E-01 1 |

| 0.00 T 0.00 93.62 0.00 |

|* *|

|**************************************************************************|

| |

|--------------------------------------------------------------------------|
Steel Design (Track 2) Beam 4 Check 1

|--------------------------------------------------------------------------|

| Y PROPERTIES |

|************* | IN INCH UNIT |

| * |=============================| ===|=== ------------ |

|MEMBER 4 * | AISC SECTIONS | | AX = 12.50 |

| * | TAP ERED | | --Z AY = 5.56 |

|DESIGN CODE * | | | AZ = 4.39 |

| AISC-1989 * =============================== ===|=== SY = 6.45 |

| * SZ = 53.00 |

| * |<---LENGTH (FT)= 2.13 --->| RY = 1.23 |

|************* RZ = 5.41 |

| |

| 93.6 (KIP-FEET) |

|PARAMETER |L1 STRESSES |

|IN KIP INCH | L1 IN KIP INCH |

|--------------- + L1 L1 -------------|

| KL/R-Y= 20.74 | L1 FA = 20.55 |

| KL/R-Z= 4.73 + fa = 0.00 |

| UNL = 25.59 | L1 L1 FCZ = 23.76 |

| CB = 1.00 + FTZ = 23.76 |

| CMY = 0.85 | L1 FCY = 27.00 |

| CMZ = 0.85 + L1 L1 FTY = 27.00 |

| FYLD = 36.00 | L1 fbz = 21.20 |

| NSF = 1.00 +---+---+---+---+---+---+---+---+---+---| fby = 0.00 |

| DFF = 0.00 5.3 Fey = 347.21 |

| dff= 0.00 ABSOLUTE MZ ENVELOPE Fez =6662.26 |

| (WITH LOAD NO.) FV = 14.40 |

| fv = 7.35 |

| |

| MAX FORCE/ MOMENT SUMMARY (KIP-FEET) |

| ------------------------- |

| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |

| |

| VALUE 0.0 40.9 0.0 0.0 93.6 |

| LOCATION 0.0 0.0 0.0 0.0 0.0 |

| LOADING 0 1 0 0 1 |

| |

|**************************************************************************|

|* *|

|* DESIGN SUMMARY (KIP-FEET) *|

|* -------------- *|

|* *|

|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|

| FX MY MZ LOCATION |

| ====================================================== |

| PASS AISC- H1-3 8.921E-01 1 |

| 0.00 T 0.00 93.62 0.00 |

|* *|

|**************************************************************************|

| |

|--------------------------------------------------------------------------|
Statics Check Results

FX FY FZ MX MY
L/C
(lb) (lb) (lb) (kip-in) (kip-in)

1:LOAD Loads 0.000 -40.6E 3 0.000 0.000 0.000

1:LOAD Reactions 0.000 40.6E 3 0.000 0.000 0.000
Difference 0.000 0.000 0.000 0.000 0.000

Steel Output
No ratings yet
Steel Output
194 pages
4ce C Group 2 Truss Design
No ratings yet
4ce C Group 2 Truss Design
346 pages
Hanger
No ratings yet
Hanger
1,088 pages
Dirgahayu 3102 Instact Stability
No ratings yet
Dirgahayu 3102 Instact Stability
27 pages
Textbook of Heat Transfer - S. P. Sukhatme PDF
50% (6)
Textbook of Heat Transfer - S. P. Sukhatme PDF
122 pages
Lamp Iran
No ratings yet
Lamp Iran
76 pages
.Tank Design
No ratings yet
.Tank Design
145 pages
STAAD Azura
No ratings yet
STAAD Azura
107 pages
Staad Pro Output
No ratings yet
Staad Pro Output
13 pages
p1 Truss 11m
No ratings yet
p1 Truss 11m
220 pages
Top Beam
No ratings yet
Top Beam
11 pages
Ps1 Truss Reports
No ratings yet
Ps1 Truss Reports
103 pages
Module 06 B1 Notes PDF
No ratings yet
Module 06 B1 Notes PDF
276 pages
Ramset Anchoring Chemicals Catalogue
No ratings yet
Ramset Anchoring Chemicals Catalogue
156 pages
02S515检查井图集
No ratings yet
02S515检查井图集
149 pages
Dgas-Ippm-Ansi-Civ-Cal-002 - Attachment 8 Output Staad Pro
No ratings yet
Dgas-Ippm-Ansi-Civ-Cal-002 - Attachment 8 Output Staad Pro
16 pages
Central Stringer Prokon
No ratings yet
Central Stringer Prokon
6 pages
VSMC Compressor Unit Installation Operation Maintenance Manual 35391vc Rev 0 en Us 1580320 PDF
No ratings yet
VSMC Compressor Unit Installation Operation Maintenance Manual 35391vc Rev 0 en Us 1580320 PDF
156 pages
Design and Analysis of Continuous Propped Cantilever Beam
No ratings yet
Design and Analysis of Continuous Propped Cantilever Beam
15 pages
Pile Load Test (CONDITION-1)
No ratings yet
Pile Load Test (CONDITION-1)
17 pages
BR No. 50
No ratings yet
BR No. 50
28 pages
Compiled 1
No ratings yet
Compiled 1
49 pages
C1 Crane Staad
No ratings yet
C1 Crane Staad
10 pages
SIGMA NEW Brochure PDF
No ratings yet
SIGMA NEW Brochure PDF
11 pages
Catalogue 2020 Neco
No ratings yet
Catalogue 2020 Neco
54 pages
Product Catalogue 2021 20210303
No ratings yet
Product Catalogue 2021 20210303
64 pages
Price List of uPVC Pipe
No ratings yet
Price List of uPVC Pipe
3 pages
Portal 2D Load List: Select Perform Analysis #2 Checkcode
No ratings yet
Portal 2D Load List: Select Perform Analysis #2 Checkcode
31 pages
Design Calculation For 9 MM Fibrous Plaster Ceiling
No ratings yet
Design Calculation For 9 MM Fibrous Plaster Ceiling
13 pages
Report Baba
No ratings yet
Report Baba
48 pages
ZHB037, Soil Report
100% (1)
ZHB037, Soil Report
35 pages
Ecomax Use Installation and Servicing Manual 261444 PDF
No ratings yet
Ecomax Use Installation and Servicing Manual 261444 PDF
60 pages
Emergency Shed 1.5m Spacing
No ratings yet
Emergency Shed 1.5m Spacing
31 pages
Deflections For Load Case C1: Aluminium Frame For Glass
No ratings yet
Deflections For Load Case C1: Aluminium Frame For Glass
17 pages
STAAD - Pro Report: Job Information
No ratings yet
STAAD - Pro Report: Job Information
4 pages
Kayu (W0393) - Pe Report Rev1
No ratings yet
Kayu (W0393) - Pe Report Rev1
27 pages
Pole Design
No ratings yet
Pole Design
12 pages
Monday, February 03, 2014, 11:45 Am: Without This Message by Purchasing Novapdf
No ratings yet
Monday, February 03, 2014, 11:45 Am: Without This Message by Purchasing Novapdf
6 pages
Pile Load Test (Condition-2)
No ratings yet
Pile Load Test (Condition-2)
10 pages
Purlin Rev.2
No ratings yet
Purlin Rev.2
8 pages
Staad Mezzanine Design
No ratings yet
Staad Mezzanine Design
15 pages
TDS Kingcast GS - 70
No ratings yet
TDS Kingcast GS - 70
1 page
PILE LOAD TEST (Sub Beam)
No ratings yet
PILE LOAD TEST (Sub Beam)
16 pages
Elastomeric Bearing - 15m Span
No ratings yet
Elastomeric Bearing - 15m Span
23 pages
Purlins Design Analysis
No ratings yet
Purlins Design Analysis
12 pages
ZHB042, Soil Report PDF
No ratings yet
ZHB042, Soil Report PDF
35 pages
1M Check
No ratings yet
1M Check
6 pages
1.2M Check
No ratings yet
1.2M Check
6 pages
Std01-Wall Design (NBF 25)
No ratings yet
Std01-Wall Design (NBF 25)
5 pages
Site Id-Zhb012: Village Wiyala Gazani, Tehsil & District Zhob, Balochistan
No ratings yet
Site Id-Zhb012: Village Wiyala Gazani, Tehsil & District Zhob, Balochistan
22 pages
GA90-315 Power Point REV3
No ratings yet
GA90-315 Power Point REV3
27 pages
Ball Valve - Cat - 4121
No ratings yet
Ball Valve - Cat - 4121
72 pages
Geotech Report, ZHB010
No ratings yet
Geotech Report, ZHB010
17 pages
WS Report Arr 9
No ratings yet
WS Report Arr 9
12 pages
As Yb
No ratings yet
As Yb
16 pages
Canopy Analysis
No ratings yet
Canopy Analysis
8 pages
Sec. of Lintel L1 On C-C (Typical) : General Notes
No ratings yet
Sec. of Lintel L1 On C-C (Typical) : General Notes
1 page
Bab 6.3
No ratings yet
Bab 6.3
15 pages
Staad Report - Final
No ratings yet
Staad Report - Final
25 pages
Davit New
No ratings yet
Davit New
6 pages
Dead Load
No ratings yet
Dead Load
17 pages
10.0 Slope Stability Analysis
No ratings yet
10.0 Slope Stability Analysis
3 pages
Design of Elastomeric Bearing
No ratings yet
Design of Elastomeric Bearing
23 pages
Thuyet Minh PDF
No ratings yet
Thuyet Minh PDF
62 pages
Weiss Catalogue 30
No ratings yet
Weiss Catalogue 30
43 pages
SPREAD FOOTING - Typical Report
No ratings yet
SPREAD FOOTING - Typical Report
2 pages
Bearing Design Method B
No ratings yet
Bearing Design Method B
2 pages
LK, o K
No ratings yet
LK, o K
8 pages
Net Allowable Bearing Capacity (KG/CM) : Afra Corporation LTD
No ratings yet
Net Allowable Bearing Capacity (KG/CM) : Afra Corporation LTD
1 page
Design Calculation of Pile Load Test I-Beam
No ratings yet
Design Calculation of Pile Load Test I-Beam
9 pages
2d Frame Without Sway-2
No ratings yet
2d Frame Without Sway-2
4 pages
Rites LTD Stainless Steel Sheet / Plate: Inspection & Test Plan
No ratings yet
Rites LTD Stainless Steel Sheet / Plate: Inspection & Test Plan
3 pages
Self Healing PDF
No ratings yet
Self Healing PDF
7 pages
Labour Accomodation Shed-Model
No ratings yet
Labour Accomodation Shed-Model
1 page
Manhole Rungs
No ratings yet
Manhole Rungs
3 pages
Ae Odishacivil Engineering
No ratings yet
Ae Odishacivil Engineering
304 pages
5, F, RM" (3..Nvr .: (U'Arr
No ratings yet
5, F, RM" (3..Nvr .: (U'Arr
5 pages
11 June (SBC) Steel Staircase
No ratings yet
11 June (SBC) Steel Staircase
3 pages
Torch Membrane Maintenance
No ratings yet
Torch Membrane Maintenance
5 pages
Transformer Foundation 5
No ratings yet
Transformer Foundation 5
1 page
Teava Umpluta Cu Beton
No ratings yet
Teava Umpluta Cu Beton
10 pages
d8n Elec PDF
No ratings yet
d8n Elec PDF
2 pages
Tuesday, June 05, 2012, 04:03 PM: Page 1 of 7 C:/Users/karthiban - Periyaiah/desktop/structures/2x1.5-1000kg - Copy - Anl
No ratings yet
Tuesday, June 05, 2012, 04:03 PM: Page 1 of 7 C:/Users/karthiban - Periyaiah/desktop/structures/2x1.5-1000kg - Copy - Anl
7 pages
Geometric Properties of The Cross-Section Parameter Value: V, y V, Z
No ratings yet
Geometric Properties of The Cross-Section Parameter Value: V, y V, Z
2 pages
Steel Design (Track 2) Beam 1 Check 1: Job No Sheet No Rev
No ratings yet
Steel Design (Track 2) Beam 1 Check 1: Job No Sheet No Rev
1 page
Geometric Properties of The Cross-Section Parameter Value: V, y V, Z
No ratings yet
Geometric Properties of The Cross-Section Parameter Value: V, y V, Z
2 pages
Sheet Pile Design Report: This Analysis Is Carried Out With Help of The Software Named Staad Pro V8i
No ratings yet
Sheet Pile Design Report: This Analysis Is Carried Out With Help of The Software Named Staad Pro V8i
9 pages
Nitobond Ar
No ratings yet
Nitobond Ar
2 pages
Architectural R 4 05.01.19 Layout2
No ratings yet
Architectural R 4 05.01.19 Layout2
1 page
Architectural R 4 05.01.19 Layout2
No ratings yet
Architectural R 4 05.01.19 Layout2
1 page
MPP Power Plant Part-2
No ratings yet
MPP Power Plant Part-2
1 page
Electrical R-3 19.01.19 2nd Floor Circuit
No ratings yet
Electrical R-3 19.01.19 2nd Floor Circuit
1 page
Section Properties: Prop Section Area I I J Material
No ratings yet
Section Properties: Prop Section Area I I J Material
8 pages
Unit-C Unit-D Unit-C Unit-D: Section: B-B
No ratings yet
Unit-C Unit-D Unit-C Unit-D: Section: B-B
1 page
Produced by An Autodesk Educational Product: Shed Ht.-22.0M
No ratings yet
Produced by An Autodesk Educational Product: Shed Ht.-22.0M
1 page
FB-7 (Office Building Beam) FB-3 (Below This Beam)
No ratings yet
FB-7 (Office Building Beam) FB-3 (Below This Beam)
1 page
Slipway Pulley Foundation - 5 (16!05!19) (1) - Model
No ratings yet
Slipway Pulley Foundation - 5 (16!05!19) (1) - Model
1 page
Pile Load Test PDF
No ratings yet
Pile Load Test PDF
7 pages
Steel Beam
No ratings yet
Steel Beam
12 pages
TDS C 17
No ratings yet
TDS C 17
2 pages
Conveyor Truss Connections Calcs - 10
No ratings yet
Conveyor Truss Connections Calcs - 10
5 pages
Atlantic Water Heater
No ratings yet
Atlantic Water Heater
2 pages
Derrick Design Staad Report
No ratings yet
Derrick Design Staad Report
6 pages
Modeling FRP and Plastic Piping-Autopipe r11
No ratings yet
Modeling FRP and Plastic Piping-Autopipe r11
15 pages
Mass Transfer Operations 1: List of Books Information of Crystallization
No ratings yet
Mass Transfer Operations 1: List of Books Information of Crystallization
13 pages
Top PDF
No ratings yet
Top PDF
1 page
TeeJet X11R
No ratings yet
TeeJet X11R
1 page
KVC - Stainless Steel Valves
No ratings yet
KVC - Stainless Steel Valves
39 pages
C14
No ratings yet
C14
6 pages
Graphene-Based Polymer Coatings For Preventing Marine Corrosion: A Review
No ratings yet
Graphene-Based Polymer Coatings For Preventing Marine Corrosion: A Review
20 pages
Paul Njuguna Ndungu Ruaka Project Elevations
No ratings yet
Paul Njuguna Ndungu Ruaka Project Elevations
1 page