Technical Data Sheet

• Extra Performance
Shell Diala S4 ZX-I • Meets IEC 60296 - Higher Oxidation
Stability & Low Sulphur content

Premium Inhibited Electrical Insulating Oil

Shell Diala S4 ZX-I is the new electrical insulating oil from Shell designed to meet the challenges presented by the latest
power transformers. It offers an extended oil life with the peace of mind of zero sulphur content.
Shell Diala S4 ZX-I is manufactured from zero sulphur base oils produced using Shell’s GTL (gas-to-liquid) technology.
These base oils offer a high degree of compositional consistency and have an excellent response to anti-oxidant. In
addition they are globally available and free from PCBs, DBDS and passivators.
Shell Diala S4 ZX-I meets both the established and new industry copper corrosion tests.

Performance, Features & Benefits Shell Diala S4 ZX-I is specially dried and handled to achieve a

· Extended oil life low water content and retain a high breakdown voltage at point
of delivery. This enables it to be used in many applications
Shell Diala S4 ZX-I is a fully inhibited oil giving outstanding
without further treatment.
oxidation performance and an extended oil life. Shell Diala S4
ZX-I is also suitable for use in highly loaded applications. Main Applications

· Transformer protection
Shell Diala S4 ZX-I is manufactured from a zero sulphur* base
oil, making it intrinsically non-corrosive towards copper,
without the need for passivation or other additives. Specifications, Approvals & Recommendations
Shell Diala S4 ZX-I meets all relevant tests for copper
corrosion, namely the established DIN 51353 (Silver Strip
· IEC 60296 (2012): Table 2 Transformer Oil (I) (Inhibited Oil)
Section 7.1 ("Higher oxidation stability and low sulphur
Test), ASTM D1275, and also the latest more severe tests: IEC
content").
62535 and ASTM D1275B.
For a full listing of equipment approvals and recommendations,
*Sulphur content below 1ppm detection limit of ASTM D5185
please consult your local Shell Technical Help Desk.

· System efficiency
The good low temperature viscometric properties of the oil
ensure proper heat transfer inside the transformer, even from
very low starting temperatures.

Typical physical characteristics

Properties Method IEC 60296 Table 2 + section Shell Diala S4 ZX-I Typical
7.1
Appearance IEC 60296 Clear, free from sediment and Complies
suspended matter
Density @200C kg/m3 ISO 3675 Max. 895 805

Kinematic Viscosity @400C mm2/s ISO 3104 Max. 12 9.6

Kinematic Viscosity @-300C mm2/s ISO 3104 Max. 1 800 382

Flashpoint P.M. 0
C ISO 2719 Min. 135 191

Pour Point 0
C ISO 3016 Max. -40 -42

Neutralisation value mg IEC 62021-1 Max. 0.01 <0.01

KOH/g

Total Sulphur Content mg/kg ASTM D5185 Max. 500 <1

Page 1 of 2 Shell Diala S4 ZX-I, v 3.2 22.08.2014.14.14

 Properties Method IEC 60296 Table 2 + section Shell Diala S4 ZX-I Typical
7.1
Corrosive Sulphur DIN 51353 Not corrosive Not corrosive

Potentially Corrosive Sulphur IEC 62535 Not corrosive Not corrosive

Corrosive Sulphur ASTM D1275 B Not corrosive

Breakdown Voltage Untreated kV IEC 60156 Min. 30 60

Breakdown Voltage After kV IEC 60156 Min. 70 75

Treatment

Dielectric Dissipation Factor @900C DDF IEC 60247 Max 0.005 <0.001

Oxidation Stability 500h / IEC 61125 C Section 7.1 Limits

1200C

Total Acidity mg IEC 61125 C Max 0.3 0.02

KOH/g

Sludge %m IEC 61125 C Max 0.05 <0.01

Dielectric Dissipation Factor (DDF IEC 61125 C Max 0.05 0.001

@900C)

Water content (drums and IBC) mg/kg IEC 60814 Max 40 6

Water content (Bulk) mg/kg IEC 60814 Max 30 6

2-Furfural and related compounds mg/kg IEC 61198 Not detectable Complies
content

Metal passivator additives mg/kg IEC 60666 Not detectable Complies

Oxidation inhibitor content % mass 0.2

(DBPC)

PCA Content % mass IP346 Max 3 Complies

PCB content mg/kg IEC 61619 Not detectable Complies

These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment

· Health and Safety

Shell Diala S4 ZX-I is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.

Shell Diala S4 ZX-I is free from polychlorinated biphenyls (PCB).

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your Shell
representative.

· Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Additional Information
Storage precautions

The critical electrical properties of Shell Diala are easily compromised by trace contamination with foreign material. Typically
encountered contaminants include moisture, particles, fibres and surfactants. Therefore, it is imperative that electrical insulating oils
be kept clean and dry.

It is strongly recommended that storage containers be dedicated for electrical service and include air-tight seals. It is further
recommended that electrical insulating oils are stored indoors in climate-controlled environments.

Advice

Advice on applications not covered here may be obtained from your shell representative.

Page 2 of 2 Shell Diala S4 ZX-I, v 3.2 22.08.2014.14.14