Scribd
Upload
116 views3 pages

Refraction

Light refracts when it passes from one medium to another with a different density. Refraction occurs because the speed of light varies in different media. According to Snell's law, when light passes from one medium to another, the ratio of sines of the angle of incidence and angle of refraction is equal to the ratio of refractive indices of the two media. In this experiment, students use a laser and plastic blocks, prisms and lenses to investigate refraction and apply Snell's law to calculate the refractive indices of the materials.

Uploaded by

hanie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
116 views3 pages

Refraction

Light refracts when it passes from one medium to another with a different density. Refraction occurs because the speed of light varies in different media. According to Snell's law, when light passes from one medium to another, the ratio of sines of the angle of incidence and angle of refraction is equal to the ratio of refractive indices of the two media. In this experiment, students use a laser and plastic blocks, prisms and lenses to investigate refraction and apply Snell's law to calculate the refractive indices of the materials.

Uploaded by

hanie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

2 Refraction
We saw in the reflection experiment that light travels in straight lines until it
meets the boundary of two media.
Refraction occurs when light meets the boundary of two media, and the light
continues through the second. For example, when light hits the boundary
between air and water, its path bends, but it still continues through the water.
If you stick a pen in a glass of water, it appears to bend when it touches the
water. This is because light travels at a different speed through water than it
does through air.
In fact, light travels at a different speed in every medium. It travels fastest in a
vacuum – the speed at which it travels is referred to as the speed of light, and
is denoted c. The speed of light is known very accurately, but for most
purposes:
c = 3108m/s
is good enough. The speed of light in any other medium is defined as the
speed of light (in a vacuum, c) divided by the refractive index (n) of the
medium. Mathematically,
v = c/n
The refractive index of any material is greater than or equal to one (n vacuum = 1
but otherwise n > 1). The refractive index of air is very close to one, n air 
1.008

grass sand medium 1 medium 2

n1 n 2
Normal r
i

n1 < n2

Figure 1.3 Paths from grass to sand and refraction


Figure 1.3 shows the refraction of light as it passes from one medium to a
denser medium. An analogy is to consider running from grass to sand. The
direct route is not always the quickest as the best way is to stay on the grass
longer.
The direction of propagation of light in the second medium depends on the
angle of incidence (i), the refractive index of the first medium (n1), and the
refractive index of the second medium (n2). The Law of Refraction is known as
Snell’s Law, and is given by:
n1sin(i) = n2sin(r)
Activity
In this experiment you will use Snell’s Law to determine the refractive index of
the plastic block.

Aims
Explore how light rays refract through the plastic block
Understand Snell’s Law, and use it to determine the refractive index of the
block
Equipment

Laser Bench Protractor, ruler, screen or card

Plastic block,
Laser Unit
prism and lens

Do not stare at the laser beam


Beware of reflections
View the laser from above,
Use card or a screen to trace the path of the laser beam

Place a sheet of paper on the base of the laser bench. Turn on the laser and
position the plastic block at an angle to the laser beam, Figure 1.4.

Draw around the block and use a screen or card to trace the path of the laser
beam. Mark where the beam enters and leaves the plastic block.

Measure the angle of incidence i and the angle of refraction r. Take several
measurements at different angles for the block.

i
r

plastic
laser block

Figure1.4 Refraction through a plastic block


Draw up a table and fill in the results for i and r.

i r Refractive Index n2 Speed of light in the


block

Are the angles of incidence the same as the angles of refraction?

If the angles are different it means the refractive index of the block is different
to air.
The refractive index of air is 1.00. Use Snell's law to calculate the refractive
index n2 of the block and fill in the table.

The velocity of light in a vacuum c is 300,000 km/s.


In the block the speed of light v is given by v  nc2

How fast is the light in the plastic block? Put the results into the table

Additional Activity
Repeat the procedure using the 60o prism, Figure 1.5 tracing out a few ray
paths and then calculating the refractive index of the prism using Snell's Law.

plastic
laser prism
Figure 1.5 Tracing light rays through the prism
Investigate how light passes through one of the lenses. Keep the lens at right
angles to the laser but move it side ways and trace out several different rays.
Refer to figure 1.6

plastic
lens
laser
Figure 1.6 Investigating a convex lens

You might also like