ITEM DESCRIPTION NPD QTY WEIGHT

(in) (kg)
N PIPE
1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 44340 MM 500.7
FITTINGS
2 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 1 2.1
SEAMLESS
CONT. ON LINE: SUPPORTS
100-3in-IA-9710101-C1-S02 3 100-3in-IA-9710101-C1-BQ303 3 1 -
E 140540 4 100-3in-IA-9710101-C1-BQ302 3 1 -
S4 N 864514 5 100-3in-IA-9710101-C1-BQ301 3 1 -
100-3in-IA-9710101-C1-BQ302 EL +30754 6 100-3in-IA-9710101-C1-BQ300 3 1 -
SUPPORT POSITION 5 0 DN
17 3" 7 100-3in-IA-9710101-C1-BQ299 3 1 -
E 135290 8 100-3in-IA-9710101-C1-BQ298 3 1 -
N 864514 9 100-3in-IA-9710101-C1-BQ297 3 1 2.1
EL +30754
00 10 100-3in-IA-9710101-C1-BQ296 3 1 -
35 11 100-3in-IA-9710101-C1-BQ295 3 1 -
S5 12 100-3in-IA-9710101-C1-BQ294 3 1 -
100-3in-IA-9710101-C1-BQ301
SUPPORT POSITION 00
E 131790 35
N 864514
EL +30754
00
35 S3
100-3in-IA-9710101-C1-BQ303
SUPPORT POSITION
00 E 138790
S8 35 N 864514
100-3in-IA-9710101-C1-BQ298 3 14 EL +30754
SUPPORT POSITION 32 S6
E 121290
100-3in-IA-9710101-C1-BQ300
N 864514
00 SUPPORT POSITION
EL +30754 35 E 128290
N 864514
S9 EL +30754
100-3in-IA-9710101-C1-BQ297
SUPPORT POSITION S7
E 117790 00 100-3in-IA-9710101-C1-BQ299
N 864514 35 SUPPORT POSITION
EL +30754 E 124790
N 864514
00 EL +30754
35
S10
N/A 100-3in-IA-9710101-C1-BQ296
SUPPORT POSITION
Pipe Sleeve 4" 00 E 114290
35
N 864514
EL +30754
S11
1 100-3in-IA-9710101-C1-BQ295
SUPPORT POSITION
Pipe Sleeve 4" E 110790
N/A 00 N 864514
72 EL +30754
0
1 35
1

26
114 48
S12
100-3in-IA-9710101-C1-BQ294
1
SUPPORT POSITION
E 99440
N 864514
2 EL +30754
3"
DN

CONT. ON LINE:
401-3in-IA-9710101-C1-S13
E 96087
N 864400
114 EL +30754

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Format/
Formato: A1 00
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
Title/
LINE PROPERTIES Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S01
Drawing nº/Plano nº: Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
Sheet/ of/
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N CONT. ON LINE: PIPE

(in) (kg)

100-3in-IA-9710101-C1-S03 1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 41180 MM 465.0
E 177476 FITTINGS
N 869214 2 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 4.1
EL +30754 SEAMLESS

22 SUPPORTS
44 32 3"DN 3 100-3in-IA-9710101-C1-BQ314 3 1 2.1
64 4 100-3in-IA-9710101-C1-BQ313 3 1 -
114 S3
5 100-3in-IA-9710101-C1-BQ312 3 1 -
100-3in-IA-9710101-C1-BQ314 6 100-3in-IA-9710101-C1-BQ311 3 1 2.1
SUPPORT POSITION 7 100-3in-IA-9710101-C1-BQ310 3 1 -
E 174254
1 N 869214 8 100-3in-IA-9710101-C1-BQ309 3 1 -
9 100-3in-IA-9710101-C1-BQ308 3 1 -
EL +30754
114 10 100-3in-IA-9710101-C1-BQ307 3 1 2.1
11 100-3in-IA-9710101-C1-BQ306 3 1 -
2
12 100-3in-IA-9710101-C1-BQ305 3 1 -
25 13 100-3in-IA-9710101-C1-BQ304 3 1 -
S4 03
44
100-3in-IA-9710101-C1-BQ313 72
SUPPORT POSITION
E 170918 114
N 866711 1
EL +30754
S5
100-3in-IA-9710101-C1-BQ312
2
SUPPORT POSITION
E 169890
N 864514
EL +30754 114
S6
100-3in-IA-9710101-C1-BQ311
SUPPORT POSITION 00 1028
E 166790 31
N 864514
EL +30754

0 0 S7
S9 35 100-3in-IA-9710101-C1-BQ310
100-3in-IA-9710101-C1-BQ308 SUPPORT POSITION
SUPPORT POSITION E 163290
E 156290 N 864514
N 864514 00 EL +30754
EL +30754 35

S10
S8
100-3in-IA-9710101-C1-BQ307
SUPPORT POSITION 100-3in-IA-9710101-C1-BQ309
00 SUPPORT POSITION
E 152790 35
N 864514 E 159790
EL +30754 N 864514
EL +30754
S11
100-3in-IA-9710101-C1-BQ306 0 64
SUPPORT POSITION 0 2
35 30
E 149290
N 864514
EL +30754
S12
100-3in-IA-9710101-C1-BQ305 00
SUPPORT POSITION 35
E 145790
N 864514
EL +30754
S13 00
35
100-3in-IA-9710101-C1-BQ304
SUPPORT POSITION
E 142290
N 864514
EL +30754 00
35
1

DN
3"
CONT. ON LINE:
100-3in-IA-9710101-C1-S01
E 140540
N 864514
EL +30754

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

00
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S02
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N PIPE
(in) (kg)

1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 43894 MM 495.6
FITTINGS
2 45º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 2.1
SEAMLESS
3 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 4.1
SEAMLESS
SUPPORTS
4 100-3in-IA-9710101-C1-BQ327 3 1 2.1
5 100-3in-IA-9710101-C1-BQ326 3 1 -
6 100-3in-IA-9710101-C1-BQ325 3 1 -
7 100-3in-IA-9710101-C1-BQ324 3 1 -
8 100-3in-IA-9710101-C1-BQ323 3 1 -
9 100-3in-IA-9710101-C1-BQ322 3 1 -
10 100-3in-IA-9710101-C1-BQ321 3 1 -
51 11 100-3in-IA-9710101-C1-BQ320 3 1 -
12 100-3in-IA-9710101-C1-BQ319 3 1 -
S4
2 3"DN 13 100-3in-IA-9710101-C1-BQ318 3 1 -
100-3in-IA-9710101-C1-BQ327 351 EL +30754 14 100-3in-IA-9710101-C1-BQ317 3 1 2.1
SUPPORT POSITION 51 15 100-3in-IA-9710101-C1-BQ316 3 1 -
E 216217 16 100-3in-IA-9710101-C1-BQ315 3 1 -
N 864514
EL +30754 51
322
S6 0
3 00 1 1
100-3in-IA-9710101-C1-BQ325
SUPPORT POSITION

300
E 209717 5 00 2
N 864514 3
EL +30754 0
00 30 287
35 51
S8 CONT. ON LINE:
100-3in-IA-9710101-C1-BQ323 100-3in-IA-9710101-C1-S04
SUPPORT POSITION 00 E 217206
S10 E 202717 35 N 864514
100-3in-IA-9710101-C1-BQ321 N 864514 EL +30454
SUPPORT POSITION EL +30754 S5
0
E 195717 3 50 100-3in-IA-9710101-C1-BQ326
N 864514 SUPPORT POSITION
EL +30754 3 E 213217
8 81 N 864514
S12 3
00 S7 EL +30754
100-3in-IA-9710101-C1-BQ319 35
SUPPORT POSITION 100-3in-IA-9710101-C1-BQ324
E 188717 SUPPORT POSITION
N 864514 E 206217
00 N 864514
EL +30754 35
EL +30754
S14 S9
100-3in-IA-9710101-C1-BQ322
100-3in-IA-9710101-C1-BQ317 00
SUPPORT POSITION 35 SUPPORT POSITION
E 181717 E 199217
N 864514 N 864514
00 EL +30754
EL +30754 35 S11
114 114 100-3in-IA-9710101-C1-BQ320
3 SUPPORT POSITION
00 E 192217
3"DN 114 35
N 864514
44 EL +30754
72
1 00 S13
31
100-3in-IA-9710101-C1-BQ318
21 SUPPORT POSITION
97
1 E 185217
N 864514
114 EL +30754
S15
3 100-3in-IA-9710101-C1-BQ316
SUPPORT POSITION
S16 E 178617
100-3in-IA-9710101-C1-BQ315 N 864514
SUPPORT POSITION EL +30754
E 177590
N 866711
EL +30754

CONT. ON LINE:
100-3in-IA-9710101-C1-S02
E 177476
N 869214
EL +30754

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

00
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S03
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N CONT. ON LINE: PIPE

(in) (kg)

100-3in-IA-9710101-C1-S05 1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 54414 MM 614.4
E 270038 2 PIPE, PE, S-80, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 1 450 MM 1.5
N 866552 3"DN
FITTINGS
EL +30454 3 SOCKOLET, SWE, CL3000, MSS SP-97, ASTM A105 3X1 2 0.6
S10
4 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 4.1
100-3in-IA-9710101-C1-BQ338
SEAMLESS
SUPPORT POSITION
5 NIPPLE, PBE, S-80, ASME B36.10M, 100 MM LONG, ASTM A106 Gr.B 1 1 0.4
E 268288
6 90º ELBOW, SW, CL3000, ASME B16.11, ASTM A105 1 1 0.6
N 866552
EL +30454 5 0 FLANGES
S11 17 7 SOCKET FLANGE, RF, 150 Lbs, ASME-B16.5, ASTM A105 1 1 1.0
100-3in-IA-9710101-C1-BQ337 00 8 BLIND FLANGE, 150 Lbs, RF, ASME B16.5, ASTM A105 1 1 1.4
SUPPORT POSITION 35 VALVES
E 264788 9 BALL VALVE (BA1A3), Class 150, RF, ANSI B16.5, ASTM A105 1 1 -
N 866552 00 SUPPORTS
EL +30454 35 10 100-3in-IA-9710101-C1-BQ338 3 1 -
S13 S12 11 100-3in-IA-9710101-C1-BQ337 3 1 -
0
100-3in-IA-9710101-C1-BQ335 3 50 100-3in-IA-9710101-C1-BQ336 12 100-3in-IA-9710101-C1-BQ336 3 1 -
SUPPORT POSITION SUPPORT POSITION 13 100-3in-IA-9710101-C1-BQ335 3 1 -
E 257788 E 261288 14 100-3in-IA-9710101-C1-BQ334 3 1 -
00
N 866552 35 N 866552 15 100-3in-IA-9710101-C1-BQ333 3 1 -
EL +30454 EL +30454 16 100-3in-IA-9710101-C1-BQ332 3 1 -
17 100-3in-IA-9710101-C1-BQ331 3 1 2.1
00 S14
35 18 100-3in-IA-9710101-C1-BQ330 3 1 -
100-3in-IA-9710101-C1-BQ334 19 100-3in-IA-9710101-C1-BQ329 3 1 -
SUPPORT POSITION 20 100-3in-IA-9710101-C1-BQ328 3 1 -
S16 E 254288 GASKETS
100-3in-IA-9710101-C1-BQ332 N 866552 21 NON METALLIC FLAT RING GASKET, COMPRESSED ARAMIDE FIBER 1 2 -
SUPPORT POSITION L EL +30454
E 234217 R IA S15 BONDED WITH NBR, 150 Lbs, RF, ASME B16.21
71 63
1 AE 100-3in-IA-9710101-C1-BQ333 BOLTS & NUTS
N 866552 5 50
EL +30454 16 I ED SUPPORT POSITION 22 STUDBOLTS, ASME B18.2.1, ASTM A193 Gr.B7 - 63.5 mm Length 1/2 8 -

B UR E 250788 23 HEAVY HEXAGONAL NUT, ASME B18.2.2, ASTM A194 Gr.2H, 0.5 in 1/2 16 -
S20 N 866552
100-3in-IA-9710101-C1-BQ328 EL +30454
SUPPORT POSITION
E 220217
N 866552 0 ED
0 I BURIED PIPE SHALL BE INSTALLED WITH WRAPPING. FOR WRAPPING DETAILS
G21 B22/23
EL +30454 35 B UR REFER TO NOTE 10 OF BLM1A-IDM-STO-DC-0007 - UNDERGROUND NETWORKS.
8 9 I AL GENERAL PLAN.
OPERATOR UP 00 A ER
HV9710175 35 S17
2 2 100-3in-IA-9710101-C1-BQ331
3 67 00 SUPPORT POSITION
1 1" 35 E 230717
127 6 DN 3X1"DN
5 N 866552
F7 G21 B22/23 00 EL +30454
35 S18
45 100 100-3in-IA-9710101-C1-BQ330
0
SUPPORT POSITION
24 E 227217
CONT. ON LINE: N 866552
100-1in-IA-9720101-C1-S01 E 219407 EL +30454
E 218476 N 866552 S19
N 866552 24 EL +30454 100-3in-IA-9710101-C1-BQ329
EL +30521 SUPPORT POSITION
3 6 E 223717
3X1"DN 9 31 EL +30264 N 866552
EL +30454
67
1 E 218476
114 N 866552
EL +30454
42
4 10 1810
114
1

114 4
N CONT. ON LINE:
3 "D 100-3in-IA-9710101-C1-S03
E 217206
N 864514
EL +30454

114

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

00
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S04
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 CONT. ON LINE:
ITEM DESCRIPTION NPD QTY WEIGHT
100-3in-IA-9710101-C1-S06
N E 317336 PIPE
(in) (kg)

N 871740 1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 52030 MM 587.5
EL +30454 FITTINGS
S3 2 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 4.1
100-3in-IA-9710101-C1-BQ353
83 SEAMLESS
SUPPORT POSITION 15 SUPPORTS
E 315753 3 100-3in-IA-9710101-C1-BQ353 3 1 -
N 871740 3"DN
EL +30454 5 1 00 4 100-3in-IA-9710101-C1-BQ352 3 1 -
1 01 35 5 100-3in-IA-9710101-C1-BQ351 3 1 2.1
6 100-3in-IA-9710101-C1-BQ350 3 1 -
7 100-3in-IA-9710101-C1-BQ349 3 1 -
S5 0 0 8 100-3in-IA-9710101-C1-BQ348 3 1 2.1
100-3in-IA-9710101-C1-BQ351 35 S4 9 100-3in-IA-9710101-C1-BQ347 3 1 -
SUPPORT POSITION 114 100-3in-IA-9710101-C1-BQ352 10 100-3in-IA-9710101-C1-BQ346 3 1 -
E 308753 SUPPORT POSITION 11 100-3in-IA-9710101-C1-BQ345 3 1 -
N 871740 E 312253 12 100-3in-IA-9710101-C1-BQ343 3 1 -
EL +30454 1
114 N 871740 13 100-3in-IA-9710101-C1-BQ342 3 1 -
EL +30454 14 100-3in-IA-9710101-C1-BQ341 3 1 -
2 15 100-3in-IA-9710101-C1-BQ340 3 1 -
30 16 100-3in-IA-9710101-C1-BQ339 3 1 -
12 49 SUPPORTS
60
17 100-3in-IA-9710101-C1-BQ344 3 1 -

S6
1 114
100-3in-IA-9710101-C1-BQ350
SUPPORT POSITION
E 307071 633
N 868728 2
EL +30454
S8
100-3in-IA-9710101-C1-BQ348
SUPPORT POSITION 114
E 303288 50
31 S7
N 866552
EL +30454 100-3in-IA-9710101-C1-BQ349
SUPPORT POSITION
00 E 306438
S10 35
N 866552
100-3in-IA-9710101-C1-BQ346 EL +30454
SUPPORT POSITION S9
0
E 296288 3 50 100-3in-IA-9710101-C1-BQ347
S17 N 866552 SUPPORT POSITION
100-3in-IA-9710101-C1-BQ344 EL +30454 E 299788
N 866552
SUPPORT POSITION 00
E 289288 35 EL +30454
N 866552
EL +30454 S11
0
S13 3 50 100-3in-IA-9710101-C1-BQ345
100-3in-IA-9710101-C1-BQ342 SUPPORT POSITION
SUPPORT POSITION E 292788
E 282288 N 866552
N 866552 0 EL +30454
0 19
EL +30454 35 36
9 S12
S16 100-3in-IA-9710101-C1-BQ343
100-3in-IA-9710101-C1-BQ339 SUPPORT POSITION
SUPPORT POSITION E 285788
E 271788 0 0 N 866552
N 866552 35 EL +30454
EL +30454
0 S14
0
35 100-3in-IA-9710101-C1-BQ341
SUPPORT POSITION
E 278788
00 N 866552
35 EL +30454
S15
0 100-3in-IA-9710101-C1-BQ340
0
35 SUPPORT POSITION
1 E 275288
N 866552
DN EL +30454
3"
CONT. ON LINE:
100-3in-IA-9710101-C1-S04
E 270038
N 866552
EL +30454

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

00
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S05
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N PIPE
(in) (kg)

1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 42217 MM 476.7
FITTINGS
2 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 2 4.1
SEAMLESS
SUPPORTS
3 100-3in-IA-9710101-C1-BQ366 3 1 2.1
CONT. ON LINE: 4 100-3in-IA-9710101-C1-BQ365 3 1 -
100-3in-IA-9710101-C1-S07 5 100-3in-IA-9710101-C1-BQ364 3 1 -
E 354820 6 100-3in-IA-9710101-C1-BQ363 3 1 -
N 866552 7 100-3in-IA-9710101-C1-BQ362 3 1 -
EL +30454 8 100-3in-IA-9710101-C1-BQ361 3 1 -
3"DN 9 100-3in-IA-9710101-C1-BQ360 3 1 -
S3 10 100-3in-IA-9710101-C1-BQ359 3 1 -
100-3in-IA-9710101-C1-BQ366 11 100-3in-IA-9710101-C1-BQ358 3 1 -
SUPPORT POSITION 12 100-3in-IA-9710101-C1-BQ357 3 1 -
E 354333 13 100-3in-IA-9710101-C1-BQ356 3 1 2.1
N 866552 14 100-3in-IA-9710101-C1-BQ355 3 1 -
EL +30454 15 100-3in-IA-9710101-C1-BQ354 3 1 -
S4
100-3in-IA-9710101-C1-BQ365 487
SUPPORT POSITION
00
E 350833 35
N 866552
EL +30454
S5 00
100-3in-IA-9710101-C1-BQ364 35
SUPPORT POSITION
E 347333
N 866552 00
EL +30454 35
S7 S6
S9 100-3in-IA-9710101-C1-BQ362 00 100-3in-IA-9710101-C1-BQ363
100-3in-IA-9710101-C1-BQ360 SUPPORT POSITION 35 SUPPORT POSITION
SUPPORT POSITION E 340333 E 343833
E 333333 N 866552 N 866552
N 866552 EL +30454 0 0 EL +30454
EL +30454 35
S10
100-3in-IA-9710101-C1-BQ359
SUPPORT POSITION 00 7 S8
E 329833 35 25 100-3in-IA-9710101-C1-BQ361
N 866552 37
SUPPORT POSITION
EL +30454 E 336833
S14 N 866552
100-3in-IA-9710101-C1-BQ355 00 EL +30454
35
SUPPORT POSITION S11
114 114 E 317983 100-3in-IA-9710101-C1-BQ358
N 866552 0 SUPPORT POSITION
EL +30454 0
35 E 326333
N 866552
2
3"DN EL +30454
0 S12
0
49 35 100-3in-IA-9710101-C1-BQ357
60 SUPPORT POSITION
1 E 322833
25 N 866552
21
114 24 EL +30454
76
1 25
24 S13
100-3in-IA-9710101-C1-BQ356
SUPPORT POSITION
E 320408
2 N 866552
CONT. ON LINE:
100-3in-IA-9710101-C1-S05 EL +30454
E 317336 114
N 871740 S15
EL +30454 100-3in-IA-9710101-C1-BQ354
SUPPORT POSITION
E 317450
N 868728
EL +30454

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

00
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S06
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT
(in) (kg)
N PIPE
3"DN 1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 31366 MM 354.2
FITTINGS
N/A 2 SOCKOLET, SWE, CL3000, MSS SP-97, ASTM A105 3X1 1 0.3
Pipe Sleeve 4" 3 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 4 8.2
7
48 SEAMLESS
SUPPORTS
1 4 100-3in-IA-9710101-C1-BQ372 3 1 2.1
5 100-3in-IA-9710101-C1-BQ371 3 1 -
Pipe Sleeve 4" 0 0 6 100-3in-IA-9710101-C1-BQ370 3 1 -
N/A 40 7 100-3in-IA-9710101-C1-BQ369 3 1 -
1
8 100-3in-IA-9710101-C1-BQ368 3 1 -
9 100-3in-IA-9710101-C1-BQ367 3 1 -
114
86
24
1 CONT. ON LINE:
402-3in-IA-9710101-C1-S01
E 383860
3 N 868590
EL +31654
114

972
S4
100-3in-IA-9710101-C1-BQ372
SUPPORT POSITION 114
E 375333
N 868590 4 0
EL +30454 14
3
EL +30454
114
00
35
S8
100-3in-IA-9710101-C1-BQ368 S5
SUPPORT POSITION 100-3in-IA-9710101-C1-BQ371
E 361333 00
35 SUPPORT POSITION
N 868590 E 371833
EL +30454 N 868590
EL +30454
S6
100-3in-IA-9710101-C1-BQ370
00 SUPPORT POSITION
35
5 E 368333
S9 0 79 N 868590
2 EL +30454
100-3in-IA-9710101-C1-BQ367
SUPPORT POSITION
E 357833 S7
N 868590 00 100-3in-IA-9710101-C1-BQ369
EL +30454 35 SUPPORT POSITION
E 364833
CONT. ON LINE: N 868590
100-1in-IA-9720102-C1-S01 EL +30454
E 355864
N 868590 00
EL +30521 35
2
3X1"DN
67

1
E 355864
3 N 868590
6 EL +30454
81
1
114
18
10 CONT. ON LINE:
3
114 100-3in-IA-9710101-C1-S06
114 E 354820
DN N 866552
3" EL +30454

114

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 06-07-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Format/
Formato: A1 00
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
Title/
LINE PROPERTIES Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
100-3in-IA-9710101-C1-S07
Drawing nº/Plano nº: Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
Sheet/ of/
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N PIPE
(in) (kg)

1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 14910 MM 168.4
114 3 FITTINGS
EL +32068 2 SOCKOLET, SWE, CL3000, MSS SP-97, ASTM A105 3X1 2 0.6
2 3 90º LR ELBOW, BW, S-40, ASME B16.9, ASTM A234 Gr.WPB, 3 8 16.3
100 114 SEAMLESS
6 4 NIPPLE, PBE, S-80, ASME B36.10M, 100 MM LONG, ASTM A106 Gr.B 1 3 1.0
7 5 90º ELBOW, SW, CL3000, ASME B16.11, ASTM A105 1 1 0.6
F6 G13 B14/15
67 FLANGES
167

686
6 SOCKET FLANGE, RF, 150 Lbs, ASME-B16.5, ASTM A105 1 2 2.0
4 9
114 83 7 BLIND FLANGE, 150 Lbs, RF, ASME B16.5, ASTM A105 1 2 2.8
37
14 50
VALVES

1
8 BALL VALVE (BA1A3), Class 150, RF, ANSI B16.5, ASTM A105 1 1 -
E 42175 D N
1 N 200966 3" SUPPORTS
CONT. ON LINE: 9 950-3in-IA-9710101-C1-BQ210 3 1 -
EL +32068
114 114 950-3in-IA-9710101-C1-S04 10 950-3in-IA-9710101-C1-BQ209 3 1 -
2 E 43241 01 11 950-3in-IA-9710101-C1-BQ208 3 1 -
3 3X1"DN N 200966
12 950-3in-IA-9710101-C1-BQ207 3 1 -
EL +31154
GASKETS

686
13 NON METALLIC FLAT RING GASKET, COMPRESSED ARAMIDE FIBER 1 3 -
3
BONDED WITH NBR, 150 Lbs, RF, ASME B16.21
114

1
BOLTS & NUTS
114 14 STUDBOLTS, ASME B18.2.1, ASTM A193 Gr.B7 - 63.5 mm Length 1/2 12 -
15 HEAVY HEXAGONAL NUT, ASME B18.2.2, ASTM A194 Gr.2H, 0.5 in 1/2 24 -
114

3 16
96
EL +31154 25
95
114
3
S9 1
950-3in-IA-9710101-C1-BQ210
SUPPORT POSITION
E 40624 114
N 199270 S10
EL +31154 950-3in-IA-9710101-C1-BQ209
SUPPORT POSITION

1021
E 40624
N 197250
1 EL +29905
114
3 2
114 3X1"DN
EL +29905
E 40624
N 197528
EL +29905 50
0
1"DN
G13 B14/15
100 7 27
8
127 4

1 6 67
25
100 00
2
24 3
4 EL +31254
5 114 CONT. ON LINE:
EL +29714 60 950-3in-IA-9710101-C1-S02
24 25 E 40624
F6 G13 B14/15 N 191275
8 EL +31254
OPERATOR UP 25 3"
00 DN
HV9710170

1
114
S11

1122
950-3in-IA-9710101-C1-BQ208
SUPPORT POSITION
E 40624 S12 1
114
N 194750 950-3in-IA-9710101-C1-BQ207
EL +29905 SUPPORT POSITION
E 40624
N 192250 114
EL +29905
3

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
01 06-07-2018 FOR CONSTRUCTION ICL BML ACB
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 15-06-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

01
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
950-3in-IA-9710101-C1-S03
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006
 ITEM DESCRIPTION NPD QTY WEIGHT

N PIPE
(in) (kg)

1 PIPE, BE, S-40, ASME B36.10M, ASTM A106 Gr.B, SEAMLESS 3 50893 MM 574.6
SUPPORTS
2 950-3in-IA-9710101-C1-BQ225 3 1 -
3 950-3in-IA-9710101-C1-BQ224 3 1 -
4 950-3in-IA-9710101-C1-BQ223 3 1 -
5 950-3in-IA-9710101-C1-BQ222 3 1 -
6 950-3in-IA-9710101-C1-BQ221 3 1 -
7 950-3in-IA-9710101-C1-BQ220 3 1 -
8 950-3in-IA-9710101-C1-BQ219 3 1 -
CONT. ON LINE:
9 950-3in-IA-9710101-C1-BQ218 3 1 -
950-3in-IA-9710101-C1-S05
10 950-3in-IA-9710101-C1-BQ217 3 1 -
E 94134 D N
N 200966 3" 11 950-3in-IA-9710101-C1-BQ216 3 1 -
EL +31154 12 950-3in-IA-9710101-C1-BQ215 3 1 -
13 950-3in-IA-9710101-C1-BQ214 3 1 -
S2 02 14 950-3in-IA-9710101-C1-BQ213 3 1 -
950-3in-IA-9710101-C1-BQ225 15 15 950-3in-IA-9710101-C1-BQ212 3 1 -
SUPPORT POSITION 16 950-3in-IA-9710101-C1-BQ211 3 1 -
E 92632 00
N 200966 35
EL +31154
S4 00
35
950-3in-IA-9710101-C1-BQ223 S3
SUPPORT POSITION
950-3in-IA-9710101-C1-BQ224
E 85632 00
N 200966 35 SUPPORT POSITION
EL +31154 E 89132
N 200966
S6 00 EL +31154
35
950-3in-IA-9710101-C1-BQ221 S5
SUPPORT POSITION
0 950-3in-IA-9710101-C1-BQ222
E 78632 0
N 200966 35 SUPPORT POSITION
E 82132
EL +31154
S8 N 200966
00 EL +31154
950-3in-IA-9710101-C1-BQ219 35
SUPPORT POSITION S7
E 71632 950-3in-IA-9710101-C1-BQ220
N 200966 SUPPORT POSITION
EL +31154 0 0 E 75132
35
S10 N 200966
950-3in-IA-9710101-C1-BQ217 8 93 EL +31154
SUPPORT POSITION 50
E 64632 00
S12 N 200966 35 S9
950-3in-IA-9710101-C1-BQ215 EL +31154 950-3in-IA-9710101-C1-BQ218
SUPPORT POSITION SUPPORT POSITION
E 57632 0 0
35 E 68132
N 200966 N 200966
EL +31154 EL +31154
S16 00
950-3in-IA-9710101-C1-BQ211 35 S11
SUPPORT POSITION 950-3in-IA-9710101-C1-BQ216
E 43632 SUPPORT POSITION
00 E 61132
N 200966 35
EL +31154 N 200966
EL +31154
00
35 S13
950-3in-IA-9710101-C1-BQ214
SUPPORT POSITION
00 E 54132
35
N 200966
EL +31154
00
35 S14
1 950-3in-IA-9710101-C1-BQ213
3"DN SUPPORT POSITION
E 50632
N 200966
EL +31154
S15
CONT. ON LINE:
950-3in-IA-9710101-C1-BQ212
950-3in-IA-9710101-C1-S03
SUPPORT POSITION
E 43241
E 47132
N 200966 01
N 200966
EL +31154
EL +31154

NOTE: FOR THE FITTINGS INDICATED IN THE LIST OF MATERIALS ABOVE, FOR PIPES FROM 8" THROUGH 18",
THE S-STD INSTEAD OF SCHEDULE 20. THIS APPLIES TO ELBOWS, TEES, REDUCERS AND WELD NECK
FLANGES. FOR THESE FITTINGS, INDICATED WEIGHTS WILL SLIGHTLY CHANGE ACCORDINGLY.

NOTES:
01 06-07-2018 FOR CONSTRUCTION ICL BML ACB
1.- ALL COORDINATES, ELEVATIONS AND DIMENSIONS ARE IN MILLIMETERS, UNLESS NOTED OTHERWISE.
00 15-06-2018 FOR CONSTRUCTION ICL BML ACB
2.- TO IDENTIFY EASILY THE LOCATION OF PIPE´S SLEEVES ON ISOMETRICS, WHENEVER A PIPE SLEEVES IS REV. DATE/FECHA DESCRIPTION/DESCRIPCION DRAWN/DIBUJADO CHECK/COMPROBADO APPROVE/APROBADO
APLICABLE, THEY WILL BE REPRESENTED ON THE ISOMETRIC WITH A DOTTED LINE AROUND THE MAIN PIPELINE. Scale A1/ Owner/
Drawn/Dibujado Approved/Aprobado Revision/Revisión
THE DIAMETER OF PIPE SLEEVE AND THE DISTANCE IN MM BETWEEN THE OUTSIDE DIAMETER OF MAIN PIPE Escala A1: N/A Cliente
Date/Fecha: 06-07-2018 06-07-2018

01
AND THE OUTSIDE DIAMETER OF THE PIPE SLEEVE IS INDICATED. HOWEVER, FOR THE DETAIL INFORMATION Format/
FOR THE PIPES SLEEVES CONSTRUCTION REFER TO DOCUMENT: BLM1A-IDM-STO-DC-0011--PIPE SLEEVES DRAWINGS. Name/Nombre: ICL ACB
Formato: A1
3.- THE COORDINATES AND ELEVATIONS SHOWN IN THIS DRAWING ARE REFERED TO THE LOCAL PLANE Project/Encargo
COORDINATED SYSTEM OF THE PROJECT. EQUIVALENT BETWEEN LOCAL AND STATE PLANE COORDINATES Phase 1A Terminal Bahía Las Minas Expansion Project
FOR THIS POINT FOLLOWING: (Colon, Panama)
LINE PROPERTIES
Title/
Titulo ISOMETRIC DRAWINGS
COMPRESSED AIR SYSTEM
P&ID: BLM1A-IDM-GEN-DP-0003 PIPING CLASS: C1 INSULATION TYPE/THICKNESS (mm): - OPERATION TEMPERATURE (ºC): 36. DESIGN TEMPERATURE (ºC): 60.
950-3in-IA-9710101-C1-S04
Drawing nº/Plano nº: Sheet/ of/
Project nº/Encargo nº: Owner Proj. Ref./Ref. Cliente:
LINE ID: 3in-IA-9710101-C1 DIAMETER: 3 in TEST PRESSURE (barg): 15. OPERATION PRESSURE (barg): 8. DESIGN PRESSURE (barg): 10. 1 1
BLM1A-IDM-STO-DT-0006 Hoja de 20962 BLM1A
BLM1A-IDM-STO-DT-0006