Scribd
Upload
526 views1 page

External Involute Spline Data: 12/24 Pitch, 30 Degree Pressure Angle, Fillet Root Side Fit, Class 2, ANSI B92.1-1970

This document provides specifications for external involute splines with 12/24 pitch and 30 degree pressure angle in compliance with ANSI B92.1-1970. It lists parameters such as number of teeth, dimetral pitch, pressure angle, and dimensions for base diameter, pitch diameter, minor diameter, and wire diameter for spline plugs ranging from 2 to 6 inches. Tolerances for minimum measurement over the pin are also provided.

Uploaded by

ratnakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
526 views1 page

External Involute Spline Data: 12/24 Pitch, 30 Degree Pressure Angle, Fillet Root Side Fit, Class 2, ANSI B92.1-1970

This document provides specifications for external involute splines with 12/24 pitch and 30 degree pressure angle in compliance with ANSI B92.1-1970. It lists parameters such as number of teeth, dimetral pitch, pressure angle, and dimensions for base diameter, pitch diameter, minor diameter, and wire diameter for spline plugs ranging from 2 to 6 inches. Tolerances for minimum measurement over the pin are also provided.

Uploaded by

ratnakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EXTERNAL INVOLUTE SPLINE DATA

12/24 Pitch,30 Degree pressure angle,Fillet root side fit,Class 2, ANSI B92.1-1970
Sr.No. Parameters D-4892 (2 inch plug) D-4893 (3 inch plug) D-4899 (4 inch plug) D-4900 (6 inch plug)
1 No. of teeths 12 12 18 18
2 Dimetral Pitch 12 12 12 12
3 Pressure Angle 30˚ 30˚ 30˚ 30˚
4 Base Diameter 0.866025 0.866025 1.299038 1.299038
5 Pitch Diameter 1 1 1.5 1.5
6 Fit Fillet Root Side Fit Fillet Root Side Fit Fillet Root Side Fit Fillet Root Side Fit
7 Class cl.2 cl.2 cl.2 cl.2
8 Minor Diameter OR Root Diameter 0.8500 0.8500 1.3500 1.3500
9 Min Measurement Over Pin 1.220/1.222 1.220/1.222 1.725/1.723 1.725/1.723
10 Wire Diameter 0.1600 0.1600 0.1600 0.1600

Note:
1)All dimensions are in inches
2)Coating thickness considered 0.003 inch.

You might also like