EasyLine 20GB 20screen PDF
EasyLine 20GB 20screen PDF
EasyLine 20GB 20screen PDF
ABB Fusegear
EasyLine
Fuse switch disconnector
2 EasyLine Fuse Switch Disconnector | ABB Fusegear
Content
Fuse protection 4
Technical Data 5
General 6
Apparatus overview 7
Busbar adapters 13
Ordering tables 17
Dimensional drawings 21
The fuse is a superior short circuit protection element regar- Economical installation
ding the maximum allowed cut-off current (peak let through Lifetime costs of fuse systems are low. Fuse links which can
current) and energy value. withstand a high fault level and a fault current, are available at
This is more important the higher the voltage and prospective economical prices.
fault levels are. The SlimLine switch disconnector fuse fulfil After fuse operation, only the fuse link has to be changed.
the highest requirements for modern switch fuses with a total Because the fuse links can be rapidly and easilyreplaced, plant
safety concept. The switch fuses are tested according to the down time and maintenance are substantially reduced with a
EN 60947-3 standard with more stringent requirements for fuse link system.
isolation, making, performance and safety.The fuse rails are
tested according to IEC 60269-2-1. Because the fusing elements operate in a cylinder, they are not
affected by their surroundings. Thus their protecting charac-
The melting curves and current limiting diagrams for NH fuse teristics remain stable year after year. The dynamic stress on
links are given in the IEC 269-2 standard. The s tandardised the network and its equipment is dependent of the let through
fuse characteristics and high degree of current limitation energy (i2t) at a short circuit. The fuse link provides the best
ensure that there is a simple and effective co-ordination with protection compared to other solutions, at high short circuit
fuse links and other devices. currents.
As the fuse link body is filled with quartz sand, there will be
Fuse links provide a simple procedure for selecting the right no emission of gases or arcs when a short circuit occurs. This
fuse type for your installation, without complicated calculations again leads to less stress on the network and a higher degree
or calculation tools. Fuses prevent “blackouts”. Only the fuse of personal safety.
nearest a fault trips without upstream fuses (feeders or mins)
being affected. Fuses thus provide selective coordination. Fuse protection - Easy and reliable
- Economical installation
When more power is needed in an installation, more feeders - Easy and economical selectivity
can be added without changing the present structure or any - No need for calculation tools
new selectivity calculations. Fuse links will assure selectivity in - No need to change the present structure
the installation by 1,6:1 difference in the rated current. when power is needed
- No moving parts
- No extra operation time
- No arc space
- No emission of gasses at short circuits
35
40
35
40
50
63
1,6:1 35A
50 80
Reaction i²t 63
80
100
125
time 100 160
125 200
160 250
200 315
250 400
Fuse Breaker 315 500
400 630
500 50A
630
3 - pole
Type XLP000 XLP00 XLP1 XLP2 XLP3
000
For NH fuse links acc. to IEC60269-2-1 00 1 2 3
max width = 21mm
Rated operational voltage U e (V) 400 500 690 400 500 690 500 690 500 690 500 690
Rated operational current I e (A) 80 100 50 125 160 125 250 200 400 315 630 500
Thermal current with fuse link I th (A) 100 160 250 400 630
Rated making and breaking capacity AC23B AC22B AC21B AC23B AC22B AC21B AC23B AC22B AC23B AC22B AC23B AC22B
Degree of protection from the front acc. to Open IP20 IP20 IP20 IP20 IP20
IEC60529 *) Closed IP30 IP30 IP30 IP30 IP30
4 - pole
Type SLP00 SLP-K1 SLP-K2 SLP-K3
Degree of protection from the front acc. Open IP20 IP20 IP20 IP20
The products are designed and tested in accordance with IEC / EN 60947-3
3 - pole: 4 - pole:
100 A
• Compact design for NH 00 compact fuses up to 100 A (width = 21mm)
• Modern integrated cable clamps for 1,5 - 35 mm² cables
• Integrated cable shrouds IP 20
• Snap on for DIN rail mounting (accessory)
• Front frames for 1 - 3 apparatus (accessory)
• Micro auxiliary switches, 1 or 2 pcs (accessory)
• Sealing facility
Sealing facility
Voltage measurement
DIN rail mounting
Modern integrated
cable clamps for
1,5 - 35 mm² cables
160 A
• Electronic fuse monitoring (EFM) • Kit for double DIN rail mounting
• Micro auxilliary switches, 1 or 2 pcs • Adapter for 40 and 60 mm busbar distance.
• Auxilliary switches, 1 NO or 1 NC acc. to IEC 60947-5-1 • Padlocking facility
• Cable shrouds • Sealing facility
• Wide range of cable terminal clamps (See page 14)
• Front frames for 1-3 apparatus
Padlocking and
Sealing facilities Electronic
fuse moni-
toring sho-
wing detail
for remote
signaling
Cable shrouds
250 A
• Electronic fuse monitoring (EFM)
• Micro auxiliary switches, 1 or 2 pcs
• Auxiliary switch, 1 NO or 1NC, acc. to IEC 60947-5-1
• Cable shrouds
• Wide range of cable clamps (See page 14)
• Front frames for 1 - 2 apparatus
• Adapter for 40 and 60 mm busbar distance
• Padlocking facility
• Sealing facility
XLP1
400 / 630 A
• Electronic fuse monitoring (EFM)
• Micro auxiliary switches, 1 or 2 pcs
• Auxiliary switches , 1 NO or 1NC acc. to IEC 60947-5-1
• Cable shrouds
• Wide range of cable clamps (See page 15)
• Adapter for 60 mm busbar distance
• Front frame for 1 apparatus
• Padlocking facility
• Sealing facility
XLP2
XLP3
160 - 630 A
The EasyLine range can offer a 4-pole solution by using SLP 4 pole.
The Neutral pole can be equiped with a neutral link.
SLP 00 4 pole
SLP K1 4 pole
Fuses OK X X
Fuses BLOWN X X
2. Open
Fuses OK X X
Fuses BLOWN X X
Cu 12 x 5mm or 12 x 10mm.
Specially designed for the Striebel & John Busbar system 250A and
360A.
16 - 70 16 - 95 16 - 95
Single prism clamp
10 1SEP407732R0002
(SPC)
95 - 150 95 - 150 2) 95 - 150
1)
For correct Torque (Nm) values, pleasestudy the installation description delivered with the devices.
2)
The Sm (sector shaped stranded) 150mm² have to be round formed before inserted in the Prism clamp.
1)
For correct Torque (Nm) values, pleasestudy the installation description delivered with the devices.
Type tested according to standard: EN IEC 60947-1 and DIN VDE 0295.
Explanations:
Flexible: Multi stranded
Re: Round solid
Se: Sector shaped solid
Rm: Round stranded
Sm: Sector shaped stranded
Weight
Type
Designation Item Description Order code
(Kg)
XLP000
XLP000-6CC 100A, incl. 6 Cage Clamps 1SEP201428R0001 0,46
XLP000-6CC in carton 100A, incl. 6 Cage Clamps in carton 1SEP201428R0002
XUP000-6CC 100A, Fuse Base, incl. 6 Cage Clamps 1SEP201432R0001 0,34
XLP00
XLP1
Weight
Type
Designation Item Description Order code
(Kg)
250A, incl. A60/85 adapter and 3 Bridge
XLP1-A60/85-B-3BC-below 1SEP101918R0001 2,47
Clamps, cable below
250A, incl. A60/85 adapter and 3 Bridge
XLP1-A60/85-A-3BC-above 1SEP101919R0001 2,47
Clamps, cable above
250A, incl. A40/120 adapter and 3 Bridge
XLP1-A40/120-A-3BC-above 1SEP101912R0002 2,8
Clamps, cable above
250A, incl. A40/120 adapter and 3xM10
XLP1-A40/120-A-3M10-above 1SEP101912R0004 2,75
bolts, cable above
XUP1 250A Fuse Base without clamps or bolts 1SEP101895R0001 1,1
XUP1-6BC 250A, Fuse Base incl. 6 Bridge Clamps 1SEP101895R0002 1,3
XLP2
XLP2 400A without clamps or bolts 1SEP101892R0001 2,5
XLP2-6BC 400A, incl. 6 Bridge Clamps 1SEP101892R0002 3,02
400A, incl. Electronic Fuse Monitoring and
XLP2-EFM-6BC 1SEP101892R0012 3,2
6 Bridge Clamps
400A, incl. A60/120 adapter, cable above
XLP2-A60/120-A-above 1SEP102285R0001 4,9
without clamps or bolts
400A, incl. A60/120 adapter, cable below
XLP2-A60/120-B-below 1SEP102286R0001 4,9
without clamps or bolts
XUP2 400A Fuse Base without clamps or bolts 1SEP101974R0001
XUP2-6BC 400A, Fuse Base incl. 6 Bridge Clamps 1SEP101974R0002
XLP3
XLP3 630A without clamps or bolts 1SEP101975R0001 3,7
XLP3-6BC 630A, incl. 6 Bridge Clamps 1SEP101975R0002 4,25
630A, incl. Electronic Fuse Monitoring and
XLP3-EFM-6BC 1SEP101975R0012 4,4
6 Bridge Clamps
630A, incl. A60/120 adapter, cable above
XLP3-A60/120-A-above 1SEP102287R0001 7,4
without clamps or bolts
630A, incl. A60/120 adapter, cable below
XLP3-A60/120-B-below 1SEP102288R0001 7,4
without clamps or bolts
SLP 4-pole
SLP00 160A NHP 100844R0001 1,2
SLP-K1 250A NHP 100799R0001 4
SLP-K2 400A NHP 100838R0001 7,6
SLP-K3 right 630A with N-pole to the right NHP 100838R0002 8,1
SLP-K3 left 630A with N-pole to the left NHP 100838R0003 8,1
Weight
Type
Designation Item Description Order code
(Kg)
Common accessories
1
5 Micro auxiliary switch (not for XLP000) 1SEP407742R0001 0,01
6 Auxiliary switch NC 1SEP407742R0002 0,02
7 Auxiliary switch NO 1SEP407742R0003 0,02
8 Padlock device only for XLP (not SLP) 1SEP407786R0001 0,005
Weight
Type
Designation Item Description Order code
(Kg)
Accessories XLP1
XLP1 Front cover ( spare part ) 1SEP101883R0001 0,5
For 60 mm busbar distance, 5 or 10 mm,
XLP1 A60/85 Adapter above 1SEP201451R0001 0,74
cable above
2
3 For 60 mm busbar distance, 5 or 10 mm,
XLP1 A60/85 Adapter below 1SEP201456R0001 0,74
cable below
XLP1 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101883R0007 0,37
2 XLP1 Frontframe for 1 XLP1 1SEP407815R0001 0,04
3 XLP1 Frontframe for 2 XLP1 1SEP407815R0002 0,06
9 XLP1 Cable shroud 1SEP407815R0002 0,1
9 10 XLP1 Bridge Clamp ( 3-BC ) 16 - 95mm² 1SEP407733R0002 0,11
16 XLP2 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101982R0007 0,25
XLP3 Front cover ( spare part ) 1SEP101984R0001 0,9
2 XLP3 Frontframe for 1 XLP3 1SEP407955R0001 0,055
XLP3 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101984R0007 0,35
9 XLP2/3 Cable shroud 1SEP407952R0001 0,18
18 10 XLP2/3 Bridge Clamp ( 3-BC ) 35 - 300mm² 1SEP407953R0001 0,26
11 XLP2/3 Sing.Prisme Clamp (3-SPC) 25 - 240mm² 1SEP407954R0001 0,5
16 XLP2/3 Double Pris. Clamp (3-DPC) 2 x 35 - 150mm² sm 1SEP407956R0001 0,36
22 Cable connection supply module 5-10 x 12-30mm, 35 - 120mm² GHV 240849R0034 0,62
23
XLP000 175
A 79
5
6,
x)
(2
151
134
140
132
50 19,5
75
9
19 25,5 25,5 89
SECTION A-A
A
1SEB000001
XLP00
A 205
99,5
105 88
43,5 2
20
EFM
EFM
12,5
73 3
186,5
130
25
6,5
160
169,5
188
3
74,5
19,5 33 33 20
A
SECTION A-A
XLP1 125
295
116
A 1SEB000008
66 2
42 100 22
EFM
EFM
11
183
50
268
50
233
249,5
100 7,5
25
15 15
101
35 57 57
184 22
A SECTION A-A
1SEB000002
325,5
XLP2 A
139
129
210 79 2
28
EFM
11
206
289
30 10 130 10
50
258
273
112
40 65 65 28
1SEB000003
A SECTION A-A
1SEB000003
XLP3
351
151
A 142
33 87 3
EFM
245,5
330
312
318,5
150 50
50
9 (x4)
131
1SEB000004
45 80 80 250 33
SECTION A-A
A 1SEB000004
XLP00 – A40/75
1SEB000006
XLP00 – A40/95
1SEB000117
XLP00 – A40/120
1SEB000005
XLP00 – A60/60
10-30
135
5- 10
16
9
14
44
( 103)
74
60
126
59
209
202
60
93
1SEB000007
33
23
105
XLP1 – A60/85
220
10-30
5-10
30
45
50
60
( 134 )
158
265
84
60
69
1SEB000010
27
185
13
30
48
124
40
167
265
196
40
146
112
1SEB000019
118
185
24
59
5-10
49
10-30
60
289
(167)
197
118
60
84
XLP3 – A60/120
249,0
7,9
53,3
111,3
5-10
205,8
(176)
122,5
10-30
60,0
337,6
60,0
106,3
249,0
11,1
90,22,0
53,7
5-10
204,8
(176)
10-30
122,1
60,0
348,7
60,0
125,4
1SEB000012
1SEB000013
Double406
Front frame XLP1 Single 22
0
176 176 1,5
4
5 5 5 4
2
5,5 9
62
222,5
265
86
39
1SEB000011
1SEB000011
13,5 28
17,5 158 158
185
Front frame XLP2 371
20
61
3
62
244,5
287
5,5
99
182,5
4,5
2
43,75
1SEB000015
1SEB000014
17,5
21,25
211
246
SLP00 4 pole
NHP303398
SLP-K1 4 pole
NHP303599
SLP-K2/3 4 pole
NHP303408
Catalogue: 1SEC312011B0202, June 2011, Prod. ABB AS, Low Voltage Products, Norway
the right to modify the characteristics or the products
Low Voltage Products described in this brochure. The information given is not-con-
P.O. Box 100, Sentrum tractual. For further details please contact the ABB company
marketing these products in your country.
N-3701 Skien, Norway
Phone: +47 35 58 25 00
Fax: +47 35 58 28 00
www.abb.com/fusegear