Scribd
Upload
71 views1 page

Portable Power Factor Meters: Features

The document describes Model 2039, a portable power factor meter that can measure power factor in single-phase and three-phase circuits. It uses an electronic transducer and moving coil indicator to provide a DC output proportional to voltage-current phase angle. Key features include measurement of power factors from 0.5 leading to 0.5 lagging and operation from 60-300V and 20-200% of rated current.

Uploaded by

Shang Divina Ebrada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views1 page

Portable Power Factor Meters: Features

The document describes Model 2039, a portable power factor meter that can measure power factor in single-phase and three-phase circuits. It uses an electronic transducer and moving coil indicator to provide a DC output proportional to voltage-current phase angle. Key features include measurement of power factors from 0.5 leading to 0.5 lagging and operation from 60-300V and 20-200% of rated current.

Uploaded by

Shang Divina Ebrada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Portable Power Factor Meters

2039
Model 2039 is a revolutionary series of portable wattmeters in
which a power factor is used to operate the DC indicator. This is
done using a transducer which provides a DC current
proportionate to the voltage-current phase by means of a circuit.
Model 2039 can be used in single-phase and balanced three-
phase circuits. The electronic transducer, combined with a high
sensitivity moving coil type indicator based on YOKOGAWA's
proprietary taut-band suspension system, provides a level of
performance not possible with conventional power factor meters.

Features
● For both single-phase and three-phase (balanced circuit).
● Excellent current characteristic: 20~200% of rated current (short
time period)
● Wide range of applicable voltages: 60~300 V AC
● Phase angle scale included
● Taut-band suspension system eliminates friction and provides
strong resistance to shock impact.
2039 02
Specifications
Operating principle : Rectifier type Insulation test :
Class : JIS C 1102, equivalent to Class 3.0 Between electrical circuit and the case DC 500V/More than 10MΩ
Operating position : Horizontal Between current circuit and voltage circuit DC 500V/More than 5MΩ
Rated frequency : 50/60 Hz Voltage test :
Scale length : Approximately 135 mm (deflection angle: 85°) Between electrical circuit and the case AC 2000 V for 5 seconds
Scale : Lead 0-0.3 to 1.0 to 0.3-0 lag (with phase angle scale) Between current circuit and voltage circuit AC 1500 V for 5 seconds
Effective measurement range: Lead 0.5 to 1.0 to 0.5 lag External dimensions and weight :
Consumed power Voltage circuit (120 V) : Approximately 0.14 VA Approximately 260 × 180 × 141 mm, approximately 2.9 kg
Current circuit (5 A) : Approximately 2.4 VA Standard accessory : Instruction Manual (1)
Operating temperature and humidity ranges : 0 to 40°C, 25 to 80%RH Optional accessories (sold separately) : 2292 01 Carrying case (page 10)
Storage temperature and humidity ranges : -10 to 50°C, 25 to 80%RH
Notes
1. For measurements exceeding the rated current (25 A), externally connect a current transformer
Model Rated current Rated voltage 2241-2243 (page 9) to the 5 A terminal.
01 0.2/1 A 120 V 2. For measurement with a voltage exceeding 300 V, externally connect a voltage transformer 2261
2039 02 1/5 A (Can be used between or 2262 to the 120 V terminal. (page 9)
03 5/25 A 60 and 300 V.) 3. 2039 is not JIS-approved.

Characteristics
Voltage characteristic Current characteristic
Lead Lead
5 A/120 V 5 A/120 V cos∅= 1.0 Lag cos∅= 0.5
1° 1°
cos∅= 1.0 Lead cos∅= 0.5

0 0
Lead cos∅= 0.5

1° 1°
Lag cos∅= 0.5
Lag Lag
60 120 180 240 300V 60 2 4 5A 6 8 10 12A
• JIS specification: Error within 100% of class index within ±15% of rated voltage. • JIS specification: Error within 100% of class index within 20% to 120% of rated current.

Connection diagrams
Single-phase circuit Balanced three-phase circuit
Source Load
R

Source Load S
T

± 1A 5A P2 ± 1A 5A P2

P1 P3 P1 P3

COS COS

You might also like