Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    RSK Non Return Damper Product Datasheet

    Uploaded by

    Dan Pascaru
    RSK Non Return Damper Product Datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RSK Non Return Damper Product Datasheet

    Uploaded by

    Dan Pascaru
    148 views1 page
    RSK Non Return Damper Product Datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    RSK Non Return Damper Product Datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views1 page

    RSK Non Return Damper Product Datasheet

    Uploaded by

    Dan Pascaru
    RSK Non Return Damper Product Datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRODUCT DATA

    Non Return Dampers


    NRD-Non Return Damper for rectangular or square fan and duct applications
    NRD’s are shutter type dampers designed to provide an effective back draft
    seal in ducted systems. These dampers can be installed either vertically or
    horizontally.
    Construction
    Flaps are fabricated from extruded PVC. Frames are fabricated from
    anodised aluminium with polymer corner joints.
    Damper Selection
    Standard sizes are listed in the table below to allow selections for insertion into
    duct systems. To select dampers for specific fans whether duct or roof
    mounted, refer to FansSelect electronic selection software available for
    download at www.fansdirect.com.au.

    Square Standard Models Rectangular Standard Models


    Part A B kg Part A B kg

    NRD-001 344 - 0.8 NRD-011 223 497 0.8


    NRD-002 394 - 1
    NRD-012 280 597 1
    NRD-003 457 - 1.2
    NRD-013 302 647 1.1
    NRD-004 499 - 1.4
    NRD-014 325 697 1.2
    NRD-005 544 - 1.7
    NRD-015 355 797 1.3
    NRD-006 605 - 2
    NRD-007 NRD-016 408 897 1.5
    696 - 2.6
    NRD-008 760 - 2.7 NRD-020 347 497 1.2
    NRD-009 840 - 3.1 NRD-021 397 597 1.5
    NRD-010 1040 - 5.2 NRD-022 447 647 1.8
    NRD-023 497 697 1.9
    NRD-024 547 797 2.6
    Note: Alternative, non standard
    NRD-025 597 897 2.7
    sizes are readily available. Contact
    your nearest Fans Direct sales office NRD-026 847 997 3.1
    for specific availability. NRD-027 897 1097 5.2

    RSK-Non Return Damper for circular fan and duct applications


    RSK’s are butterfly type dampers designed to provide an effective back draft
    seal in ducted systems. These dampers can be installed either vertically or
    horizontally.
    Construction
    Cases are fabricated from roll formed galvanised sheet. Butterfly elements
    are made from lightweight aluminium sheet held in the closed position with
    low resistance steel springs.

    Part A D B C

    RSK125 125 100 33 44


    RSK150 150 100 34 43
    RSK200 150 140 55 62
    RSK250 250 140 54 62
    RSK300-S 300 - - -
    RSK315* 315 140 60 55
    RSK350-S 350 - - -
    * May be used with RED315-300 Reducer for use with
    300mm fans and ducts.

    © Fans Direct www.fansdirect.com.au Tel. Australia 1300 733 833 NZ 0800 100 326

    You might also like