Scribd
Upload
45 views1 page

Noted

A piezoelectric material with a d33 value of 110×10-12 C/N that is 1 cm square and 1 mm thick will produce a voltage of 0.1V when a force of 1N is applied in the 3 direction. The deformation of the material is calculated to be 1.2×10-10 m. And the strain over voltage value is calculated to be 1.2×10-9 m/V.

Uploaded by

asluznet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views1 page

Noted

A piezoelectric material with a d33 value of 110×10-12 C/N that is 1 cm square and 1 mm thick will produce a voltage of 0.1V when a force of 1N is applied in the 3 direction. The deformation of the material is calculated to be 1.2×10-10 m. And the strain over voltage value is calculated to be 1.2×10-9 m/V.

Uploaded by

asluznet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Consider a piezo having d33 = 110×10-12 C/N and square size of 1cm. Thickness = 1mm.

If a Force of 1N is
applied in 3 direction, Calculate the voltage produced.

V = (d33 L F) / (0  A) = [(110×10-12 C/N)(10-3 m)(1 N)] / [(8.8×10-12 C/Vm)(1200)(10-2)2] = 0.1V


Deformation
T = ES
F/A = E dL/L  dL = F L/AE = (1N 10-3) / [(8.3×1010 N/m2) (1×10-2 m)] = 1.2×10-10 m
dL/V = 0 / d33E = [(8.8×10-12 C/Vm)(1200)/[(110×10-12 C/N)(8.3×1010 N/m2)
= 1.2×10-9 m/V

You might also like