Assignment Week 2
Assignment Week 2
Unit 3 - Week 2
Week 1
1) In an ideal tubular flow reactor____________ 1 point
Week 2 There is no mixing in longitudinal direction
Lecture 6 : Different Mixing take place in radial direction
types of reactors Concentration of reactants vary along the pipe length
Lecture 7: Reactor All of these
analysis
Lecture 8 : Reactor
analysis (continued)
Accepted Answers:
Lecture 9 : All of these
Stoichiometry of
bioprocesses 2) Which reactor is mostly used in Baker’s yeast fermentation process 1 point
Lecture 10 :
Batch reactor
Stoichiometry of
bioprocesses Tubular reactor
(continued) Continuous stirred tank reactor
Quiz : Week 2 Fed batch reactor
Assignment 1
Week 2: Lecture
Material
Accepted Answers:
Week 2 Assignment 1 Fed batch reactor
solution
3) Which reactor is mostly suitable for immobilized cell system 1 point
Feedback for Week 2
Bubble column reactor
Week 3
Fluidized bed reactor
Week 4 Packed bed reactor
Airlift reactor
Week 5
Week 6
Accepted Answers:
Week 7 Packed bed reactor
Week 12
Accepted Answers:
8% nickel
5) The performance equations for constant density systems are identical for 1 point
Accepted Answers:
PFR and batch reactor
https://onlinecourses.nptel.ac.in/noc17_bt23/unit?unit=11&assessment=27 1/5
07/12/2017 Industrial Biotechnology - - Unit 3 - Week 2
6) In continuous flow stirred tank reactor, the composition of exit stream ________ 1 point
Accepted Answers:
Is same as that in the reactor.
7) The liquid phase reaction A→B+C is conducted isothermally at 50 ℃ in a continuous stirred tank reactor (CSTR). The 1 point
inlet concentration of A is 8.0 g-mol/L. At a space time of 5 min, the concentration of A at the exit of CSTR is 4.0 g-mol/L. The
kinetics of the reaction is -rA=kCA A plug flow reactor of the same volume is added in series after the existing CSTR. The rate
constant (k) for this reaction at 50 ℃ is _____
0.1 min -1
0.2 min -1
0.3 min -1
0.4 min -1
Accepted Answers:
0.2 min -1
8) The liquid phase reaction A→B+C is conducted isothermally at 50 ℃ in a continuous stirred tank reactor (CSTR). The 1 point
inlet concentration of A is 8.0 g-mol/L. At a space time of 5 min, the concentration of A at the exit of CSTR is 4.0 g-mol/L. The
kinetics of the reaction is -rA=kCA A plug flow reactor of the same volume is added in series after the existing CSTR. Using the value
of rate constant from question 7, find the concentration of A (in g-mol/L) at the exit of the plug flow reactor at the same flow rate?
1.27
1.47
1.67
1.87
Accepted Answers:
1.47
9) In a first order reversible reaction A⇌B , strategy for the improvement of product formation are 1 point
Accepted Answers:
Both a and b
10)A homogeneous liquid phase reaction takes place with 50% conversion in an isothermal CSTR. What will be the 1 point
conversion if the reactor is replaced by a PFR of equal size all else remaining the same.
A→R
-rA=kCA2
50%
42%
67%
90%
Accepted Answers:
67%
11) The following reaction rate curve is shown for a reaction A→P. Here (-rA) and XA represent reaction rate and 1 point
fractional conversion, respectively. The feed is pure A and 90% conversion is desired Which amongst the following reactor
https://onlinecourses.nptel.ac.in/noc17_bt23/unit?unit=11&assessment=27 2/5
07/12/2017 Industrial Biotechnology - - Unit 3 - Week 2
Accepted Answers:
CSTR followed by PFR
12)In an aqueous solution, reaction P→Q occurs under isothermal conditions following first order kinetics. The feed rate is 1 point
500 cm3/min and the concentration of P in the feed is 1.5×10-4 mol/cm3. The reaction is carried out in a 5 L CSTR. At steady state,
60% conversion is observed. the rate constant (min-1) is
0.25
0.15
0.05
0.35
Accepted Answers:
0.15
Accepted Answers:
All the above
0.67
0.53
0.40
0.80
Accepted Answers:
0.40
15)A molecule is found to contain 47.35 % C, 10.60 % H, and 42.05 % O. What is the empirical formula for this molecule? 1 point
C2H6O
C3H4O2
C3H8O2
C4H6O2
Accepted Answers:
C3H8O2
4.07
https://onlinecourses.nptel.ac.in/noc17_bt23/unit?unit=11&assessment=27 3/5
07/12/2017 Industrial Biotechnology - - Unit 3 - Week 2
4.45
4.34
0.445
Accepted Answers:
4.45
17)The stoichiometric equation to produce biomass is as follows. CH2O + 0.488O2 + 0.098NH3 → YCCH1.79O0.5N0.2 + 1 point
0.512CO2 + 0.708H2O. What will be the value of YC?
0.488
0.678
0.201
1.512
Accepted Answers:
0.488
18)Anaerobic digestion of volatile acids by methanogenic bacteria is represented by the equation CH3COOH + NH3 → 1 point
Biomass + CO2 + H2O + CH4 If the methane production yield is 0.50 g CH4/g acetic acid Then what will be the methane production
yield in terms of mol/ mol ?
1.97
1.77
1.87
2.07
Accepted Answers:
1.87
19)Candida utilis is produced from ethanol in aerobic culture. The O2 requirement is 0.4 g O2 per g atom of carbon in 1 point
substrate. What will be the heat evolved during process per g atom carbon of substrate
212.8 kJ
222.8 kJ
202.8 kJ
232.8 kJ
Accepted Answers:
212.8 kJ
20)The growth of yeast (Saccharomyces cerevisiae) on glucose may be simply described by the following equation: 1 point
C6H12O6 + 3 O2 + 0.48 NH3 → 0.48 C6H10NO3 + 4.32 H2O + 3.12 CO2 In batch reactor of volume 100 m3, the final desired yeast
concentration is 50 g dry wt. cell/L using the above equation. Determine the total amount of glucose required in growth media
13.02 MT
12.02 MT
14.02 MT
15.02 MT
Accepted Answers:
13.02 MT
https://onlinecourses.nptel.ac.in/noc17_bt23/unit?unit=11&assessment=27 4/5
07/12/2017 Industrial Biotechnology - - Unit 3 - Week 2
https://onlinecourses.nptel.ac.in/noc17_bt23/unit?unit=11&assessment=27 5/5