Scribd
Upload
261 views4 pages

Development - Splice Lengths (ACI)

This document contains calculations for development and splice lengths of reinforcement bars in a structural module according to ACI 318 code. It lists input parameters such as bar diameter, concrete strength, bar coating, clear cover, and transverse reinforcement. The results show a tension development length of 27.5 inches, compression development length of 16.43 inches, and tension and compression lap/splice lengths of 35.7 inches and 22.5 inches respectively.

Uploaded by

yasirjuraba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
261 views4 pages

Development - Splice Lengths (ACI)

This document contains calculations for development and splice lengths of reinforcement bars in a structural module according to ACI 318 code. It lists input parameters such as bar diameter, concrete strength, bar coating, clear cover, and transverse reinforcement. The results show a tension development length of 27.5 inches, compression development length of 16.43 inches, and tension and compression lap/splice lengths of 35.7 inches and 22.5 inches respectively.

Uploaded by

yasirjuraba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Project Code Project Title Sheet No.

BAK1008 UNHCR Schools Modules Designed

Proj. Element: Structural Design of Module 5B Checked

Description: Development Length Calculations Date

Development and Splice Lengths (ACI code 318)


Input Data:
Diameter of the bar used db 0.75

Concrete strength fc' 3000

Yield strength of steel fy 60000

Fresh Concrete under the bars ≤ 12 in.

Reinforcement bars Coating Uncoated

Type of concrete (Normal or Lightweight) Normal

Reinforcement location factor y1 1

Reinforcement bars coating factor ye 1

Product of α & β y1x ye 1

Reinforcement size factor ys 1

Type of Concrete lightweight or normal λ 1

Clear bar spacing or cover dimension c 1.5

Transverse reinforcement index


Ktr 0.18

Total cross sectional area of the transverse reinforcement (2 x A b) Atr 0.22

Specified yield strength of transverse reinforcement fyt 60000


Maximum spacing of transverse reinforcement within l d s 6

No. of bars or wires being develpd along the plane of splittng n 8

Development Length:
1 Tension Development Length ldt 27.5

2 Compression Development Length ldc 16.43

Lap/Splice Length:
1 Tension Lap/Splice Length (Class B Splices) llap = 1.3 x ldt 35.7

2 Compression Lap/Splice Length 22.5


llap
3 Column Lap/Splice Length, Stressed to 0.50fy, Class B Tension llap = Max (1.3 x ldt, llap) 35.7
01

YI

AUH

4/12/14

in.
psi
psi

in.

in.2
psi
in.

in.

in.

in

in
in

You might also like