Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    Pattern Select Switch Circuit

    Uploaded by

    Erln Lima
    The document describes the pattern select switch circuit for Toyota automatic transmissions. It contains two wiring diagrams and an inspection procedure. The inspection procedure has three steps: 1. Check the pattern select switch (PATTEN SEL SW) signal using a hand-held tester or by measuring voltage between terminals. 2. Check continuity between terminals of the pattern select switch connector in different positions. 3. Check the harness and connector between the battery and pattern select switch for damage or shorts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Pattern Select Switch Circuit

    Uploaded by

    Erln Lima
    114 views4 pages
    The document describes the pattern select switch circuit for Toyota automatic transmissions. It contains two wiring diagrams and an inspection procedure. The inspection procedure has three steps: 1. Check the pattern select switch (PATTEN SEL SW) signal using a hand-held tester or by measuring voltage between terminals. 2. Check continuity between terminals of the pattern select switch connector in different positions. 3. Check the harness and connector between the battery and pattern select switch for damage or shorts.

    Original Title

    DI39

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the pattern select switch circuit for Toyota automatic transmissions. It contains two wiring diagrams and an inspection procedure. The inspection procedure has three steps: 1. Check the pattern select switch (PATTEN SEL SW) signal using a hand-held tester or by measuring voltage between terminals. 2. Check continuity between terminals of the pattern select switch connector in different positions. 3. Check the harness and connector between the battery and pattern select switch for damage or shorts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    114 views4 pages

    Pattern Select Switch Circuit

    Uploaded by

    Erln Lima
    The document describes the pattern select switch circuit for Toyota automatic transmissions. It contains two wiring diagrams and an inspection procedure. The inspection procedure has three steps: 1. Check the pattern select switch (PATTEN SEL SW) signal using a hand-held tester or by measuring voltage between terminals. 2. Check continuity between terminals of the pattern select switch connector in different positions. 3. Check the harness and connector between the battery and pattern select switch for damage or shorts.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    DI–528

    DIAGNOSTICS – AUTOMATIC TRANSMISSION (A340E, A340F)


    DI19K–06

    Pattern Select Switch Circuit

    CIRCUIT DESCRIPTION
    The ECM memory contains the shift programs for the NORMAL and POWER patterns, 2 position, L position
    and the lock–up patterns. Following the programs corresponding to the signals from the pattern select
    switch, the park/neutral position and other various sensors, the ECM switches the solenoid valves ON and
    OFF, and controls the transmission gear change and the lock–up clutch operation.

    WIRING DIAGRAM
    3RZ–FE

    Pattern Select J11 ECM


    J/B No. 3 Switch J/C
    2 17 PWR
    19 13 B–R 3 PWR GR–R GR–R
    E4 E5
    3D 3D E4 D D PWR Indicator Light
    NORM D (In Combination Meter)
    B–R I14 GR–R 13 1
    J/B No. 1 Ignition Switch C10 C12
    5 GAUGE 2 W–B
    B–Y IG1
    1F 1I
    4 20 3F
    AM1 2
    J/B No. 3
    R/B No. 2 W
    ALT AM1 16 3F
    W
    2 2
    2 1 1 2 W–B
    W–B

    Battery IE IG

    D12259
    D00751

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 790


    DI–529
    DIAGNOSTICS – AUTOMATIC TRANSMISSION (A340E, A340F)

    5VZ–FE

    Pattern Select ECM


    Switch J11
    J/B No. 3 J/C
    PWR 2 1
    19 13 3 GR–R GR–R
    B–R E4 E6 PWR
    3D 3D E4 D D
    D
    NORM

    GR–R PWR Indicator Light


    B–R (In Combination Meter)
    13 1
    I14 C10 C12
    J/B No. 1 Ignition Switch
    5 GAUGE 2 W–B
    B–Y 4 IG1 AM1 2
    1F 1I

    20 3F

    J/B
    W No. 3

    16 3F
    R/B No. 2
    ALT AM1
    W W–B
    2 2
    2 1 1 2

    W–B W–B

    Battery
    IE IG

    D12210

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 791


    DI–530
    DIAGNOSTICS – AUTOMATIC TRANSMISSION (A340E, A340F)

    INSPECTION PROCEDURE

    1 Check PATTERN SEL SW signal.

    When using hand–held tester


    PREPARATION:
    (a) Remove the DLC3 cover.
    (b) Connect a hand–held tester to the DLC3.
    (c) Turn the ignition switch ON and hand–held tester main
    switch ON.
    CHECK:
    Read the PATTERN SEL SW signal on the hand–held tester.
    OK:
    Pattern select switch PATTERN SEL SW signal
    Pushed in ON
    Pushed out OFF
    When not using hand–held tester
    3RZ–FE
    PREPARATION:
    Turn the ignition switch ON.
    CHECK:
    Measure voltage between terminal PWR of ECM and body
    ground when the pattern select switch is set to the PWR (POW-
    (–) (+) PWR ER) position and NORM (NORMAL) position.
    OK:
    Pattern select switch Voltage
    PWR 10 – 14 V
    5VZ–FE
    PWR NORM Below 1 V
    HINT:
    The ECM uses the normal pattern signal if the PWR signal is not
    input.
    (–) (+)

    D12211

    OK Proceed to next circuit inspection shown on


    matrix chart (See page DI–476).

    NG

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 792


    DI–531
    DIAGNOSTICS – AUTOMATIC TRANSMISSION (A340E, A340F)

    2 Check pattern select switch.

    PREPARATION:
    3 2
    Disconnect the pattern select switch connector.
    CHECK:
    Check continuity between terminals 2 and 3 of pattern select
    switch connector when the select switch is set to PWR and
    NORM positions.
    OK:
    Pattern select switch Specified condition
    Q08286
    PWR Continuity
    NORM No continuity

    NG Replace the pattern select switch.

    OK

    3 Check harness and connector between battery and pattern select switch, pattern
    select switch and ECM (See page IN–28).

    NG Repair or replace the harness or connector.

    OK

    Check and replace the ECM


    (See page IN–28).

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 793

    You might also like