Scribd
Upload
63 views3 pages

Attachment2 Signaling and Control

The document analyzes the percentage of radio resources used for signaling and control versus data transmission in different scenarios. It calculates these percentages for a single transmission time interval (TTI) and for an entire radio frame. Across all analyzed configurations, the percentage of resources used for signaling and control ranges from 14.61% to 33.43% for a TTI, and 14.72% to 29.23% for a radio frame.

Uploaded by

Ariev Ikank
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
63 views3 pages

Attachment2 Signaling and Control

The document analyzes the percentage of radio resources used for signaling and control versus data transmission in different scenarios. It calculates these percentages for a single transmission time interval (TTI) and for an entire radio frame. Across all analyzed configurations, the percentage of resources used for signaling and control ranges from 14.61% to 33.43% for a TTI, and 14.72% to 29.23% for a radio frame.

Uploaded by

Ariev Ikank
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Bandwith [Mhz] 2.00E+07 1.

50E+07
Total RB 100 75
Total RE/TTI 16800 12600
Total RE per BW 168000 126000
#PDCCCH Symbols 1 2 2.5 3 1

Calculating Signaling and Control contribution percentage: Analyzing only a TTI


RE used for PDCCH 1200 2400 3000 3600 900
RE used for PBCH, PSCH, SSCH, unused 432 432 432 432 432
RE used for RS or unused different to the
previous calculation 1176 1176 1176 1176 876
Subtotal - RE not used for PDSCH 2808 4008 4608 5208 2208
Relation 16.71% 23.86% 27.43% 31.00% 17.52%

Calculating Signaling and Control contribution percentage: Analyzing a whole Radio Frame
RE used for PDCCH 12000 24000 30000 36000 9000
RE used for PBCH, PSCH, SSCH, unused 576 576 576 576 576
RE used for RS or unused different to the
previous calculation 11976 11976 11976 11976 8976
Subtotal - RE not used for PDSCH 24552 36552 42552 48552 18552
Relation 14.61% 21.76% 25.33% 28.90% 14.72%
1.00E+07 5.00E+06 3.00E+06
50 25 15
8400 4200 2520
84000
2 2.5 3 1 2 2.5 3

1800 2250 2700 600 1200 1500 1800


432 432 432 432 432 432 432

876 876 876 576 576 576 576


3108 3558 4008 1608 2208 2508 2808
24.67% 28.24% 31.81% 19.14% 26.29% 29.86% 33.43%

18000 22500 27000 6000 12000 15000 18000


576 576 576 576 576 576 576

8976 8976 8976 5976 5976 5976 5976


27552 32052 36552 12552 18552 21552 24552
21.87% 25.44% 29.01% 14.94% 22.09% 25.66% 29.23%
1.40E+06
6
1008

You might also like