Dwerwe

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

foil

ape 0
M M2 5
DP
A multi-purpose, damp-proofing, LDPE membrane

WHERE TO USE APPLICATION PROCEDURE


Mapefoil DPM 250 is used as a vapour barrier for Preparation of the substrate
damp-proofing in underground construction and as a The substrate must be reasonably even and free from
separation layer and protection layer. sharp protrusions to prevent punctures to the
membrane.
Some application examples
Application procedure for Mapefoil DPM 250
• On lean concrete to receive base slabs and For damp-proofing applications, it is recommended
below-grade structures. that all Mapefoil DPM 250 edges over-lap by 50 mm
• As a damp-proofing and separation layer for floating and the laps sealed with a high strength industrial grade
screeds. double-sided tape.
• As part of the built-up for below-grade waterproofing
systems eg. Plastimul 2K Reactive MY, as PACKAGING
damp-proofing. Mapefoil DPM 250 is supplied in 1.80m x 50m rolls.
• As a protection and separation membrane for STORAGE
insulation foams. Mapefoil DPM 250 may be stored for up to 24 months
in its original unopened packaging in covered dry areas
TECHNICAL CHARACTERISTICS away from heat and sunlight.
Mapefoil DPM 250 is manufactured from low-density
polyethylene (LDPE) supplied in roll form to a thickness SAFETY INSTRUCTION FOR PREPARATION
of 250 microns. AND APPLICATION
Mapefoil DPM 250 is an article that does not require a
Material Safety Data Sheet. When using this product we
RECOMMENDATIONS recommend wearing gloves and safety goggles, and to
• Do not use Mapefoil DPM 250 in contact with surfaces adhere to the safety guidelines for the area in which
exposed to heat eg. steel roofing sheets. work is carried out.
• Do not leave Mapefoil DPM 250 exposed to UV for
prolonged periods. PRODUCT FOR PROFESSIONAL USE.
f o il
pe 50
TECHNICAL DATA (typical values)

a
M M2
DP PRODUCT IDENTITY

MY(11/2013)
Material: LDPE

Colour: blue

Roll width (m): 0.9

Sheet width (m): 1.8 ± 0.05

Roll length (m): 50 ± 0.5

Area per roll (m2): 90 ± 4

Average thickness (microns): 250 ± 75

WARNING Please refer to the current version of the

Any reproduction of texts, photos and illustrations published


Although the technical details and Technical Data Sheet, available from our
recommendations contained in this product website www.mapei.com

here is prohibited and subject to prosecution


data sheet correspond to the best of our
knowledge and experience, all the above All relevant references
information must, in every case, be taken as for the product are available
merely indicative and subject to confirmation upon request and from
after long-term practical application; for this www.mapei.com
reason, anyone who intends to use the
product must ensure beforehand that it is
suitable for the envisaged application. In
every case, the user alone is fully responsible
for any consequences deriving from the use
of the product.

2182-11-2013

BUILDING THE FUTURE

MAPEI Malaysia Sdn. Bhd. (231780-K)


PT 521, Batu 23, Jalan Rawang/Jalan Batang Berjuntai
48000 Rawang, Selangor Darul Ehsan, Malaysia
Tel +(60) 3 6093 5799 - Fax +(60) 3 6091 5801/2799
Email: [email protected] - Website: www.mapei.com.my

You might also like