Scribd
Upload
97 views2 pages

Two Way Slab Design (EC)

Two Way Slab Design (EC)

Uploaded by

Vance Kang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views2 pages

Two Way Slab Design (EC)

Two Way Slab Design (EC)

Uploaded by

Vance Kang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project Bristol Project No.

178047
Subject Page
Prepared By Date 18/7/2018
Checked By Revision

i. Material Properties
Concrete class = C32/40 Conc. density = 25 kN/m3
2
fyk = 500 N/mm γc = 1.5
fcd = 21 N/mm2 γs = 1.15
fyd = 434.783 N/mm2

ii. Slab properties


Type of panel = 9. Four edges discontinuous
Slab thickness, h = 175 mm 'ok'
short span, lx = 5400 mm
long span, ly = 5400 mm
Concrete clear cover = 25 mm

iii. Loading
Imposed action, Qk = 2.5 kN/m2
Permanent action, Gk = 1.5 kN/m2
Selfweight = 4.375 kN/m2
Design Action, Fd = 11.68 kN/m2

iv. Moment and moment coefficient


long to short span ratio, ly/lx = 1.00
short span coefficient, (-)βsx = 0.000 (-) MxEd = 0.00 kN-m
short span coefficient, (+)βsx = 0.055 (+) MxEd = 18.73 kN-m
long span coefficient, (-)βsy = 0.000 (-) MyEd = 0.00 kN-m
long span coefficient, (+)βsy = 0.056 (+) MyEd = 19.08 kN-m

v. Reinforcement
direction spacing req'd spacing prov'd
(-) Mx Top = T1 T13 - 600 'ok' T13 - 200
(+) Mx Bottom = B1 T13 - 400 'ok' T13 - 200
(-) My Top = T2 T13 - 625 'ok' T13 - 200
(+) My Bottom = B2 T13 - 350 'ok' T13 - 200

vi. Shear Check


shear coeff cont edge, βvx = 0.00
shear coeff discont edge, βvx = 0.33
shear coeff cont edge, βvy = 0.00
shear coeff discont edge, βvy = 0.33
Shear foce cont edge, x-dir = 0.00 VEd < VRd,c 'ok'
Shear foce discont edge, x-dir = 20.82 VEd < VRd,c 'ok'
Shear foce cont edge, y-dir = 0.00 VEd < VRd,c 'ok'
Shear foce discont edge, y-dir = 20.82 VEd < VRd,c 'ok'

Two-way slab design


Project Bristol Project No. 178047
Subject Page
Prepared By Date 18/7/2018
Checked By Revision

vii. Deflection check by span depth ratio 'ok'


Structural system = 2. End Span
Compression bar = 393 mm2 T10- 200
Factor , K = 1.3
Refererence reinf't ratio, ρ0 = 0.0057
Ten. reinf't ratio, ρ = 0.0047
Comp. reinf't ratio, ρ' = 0.00281
Limit span depth ratio, l/d = 44.20
Actual span depth ratio = 38.57

Two-way slab design

You might also like