Welding and Hard Facing Consumables

Electrodes – Wires - Rods

www.eutectic.com.au
Introduction

Whatever your industry, Castolin Eutectic has the solutions for Wear and Fusion problems. For more than a
century at the forefront of wear and fusion materials technology, we are at your service with the largest and most
experienced field support to meet your specific applications. With a vast product range of alloys, processes,
functional finished parts and fully automated systems in the areas of Welding, Brazing and Coating technologies,
your business can become STRONGER with Castolin Eutectic.

WEAR TECHNOLOGIES
High load, high wear is an expensive but avoidable cost to your business. Our proven technology provides
exceptionally cost-effective and STRONGER wear resistance solutions to the unnecessary expense and down-time
caused through abrasion, erosion, corrosion or heat.

FUSION TECHNOLOGIES
Specialist, stronger joints need specialist FUSION technology, and Castolin Eutectic uses specialized Welding,
Brazing and Coating processes to achieve this. Our systems and products are designed both for OEMs and end
users, and they range from simple user-friendly manual applications to major automated high volume systems.

You'll enjoy clear benefits from partnering Castolin Eutectic:

 Significantly improved profits through improved productivity and enhanced equipment durability
 Higher quality manufactured products, with highest possible safety assured
 Expertise and experience in all industrial markets
 Accessibility - more than 800 engineers and technicians in the field everyday

We are different

We have proven application know-how and an industry focus.

We are close to our customers needs.

We have well trained and international sales organizations.

We have a value philosophy.

We provide tailor made innovative solutions through a broad range of products and applications.

Customer Approach

Analyze the requirements together with the customer

Look for most economical solution-

- the life prolonging factor -

Provide solution through application expertise, wear analysis, process technology, surface engineering

Tools for customer support: Terolink, Tour Guide, demonstration, wear measurement, metallurgical analysis

Castolin Eutectic Market Centers all over the world

Sales Manager with long lasting experiences

Specialized Product Managers for the different business areas

Your Resource For Protection, Repair and Joining Solutions

Base Metal Application Index

STEELS

ARC WELDING: 2222 XHD, 6666, 777, 680 CGS, XHD 6868, BeautyWeld II, Chamfertrode, ExoTrode,
XHD 6804, 7018RS, CE9450
MIG/OPEN ARC WELDING: GS 70S-4, GS 70S-6, GS71T-1, GS 71T-5, OA 2020, DO02, DO65, GS 110, 45252
TIG WELDING: 680, 312, 2222/45612, 1851

STAINLESS STEEL

ARC WELDING: ExoTrode, E308-17, E309-17, E310-17, E316-17, 2209

MIG/OPEN ARC WELDING: GS 308L, GS309L, GS 312, GS 316L, GS 347, OA 690, DO02
TIG WELDING: AMO-L 312, 680, TIG 308L, TIG 309L, TIG 316L, TIG 312, TIG 2209

CAST IRON

ARC WELDING: XHD2222, Chamfertrode, ExoTrode, 27, 2-24, 2-44, 2240, 2233, 2224, 3055, 3099
MIG/OPEN ARC WELDING: OA 223, DO23

WEAR FACING

ARC WELDING: 40, 700, 6006, 2B, 6800, N112, N9010, N9060, N9080, XHD 6899, 5003, 6HSS
MIG/OPEN ARC WELDING: OA 3205, OA 3952, OA 4601, OA4603, OA 56, DO04, DO05, DO11, DO14, DO15,
DO30, DO48, DO60, DO80, DO390N, 45252, GS 35, GS 56, GS 60
TIG WELDING: 5HSS, 906, 912
BRAZING/SOLDERING: 185 XFC, 8800, 8811, 9000, 7888T, Tungsten Chips

ALUMINIUM

ARC WELDING: XHD 2100

MIG/OPEN ARC WELDING: GS 4043 AL, GS5356 AL
TIG WELDING: 21, 19

BRASS/BRONZE/COPPER

ARC WELDING: 285, 1855 XHD

MIG/OPEN ARC WELDING: GS CU, GS ALBR 2, GS PHOSBR, GS SILBR
TIG WELDING: 182, 1851

Your Resource For Protection, Repair and Joining Solutions

Welding Electrodes – STEEL, STAINLESS STEEL, CAST IRON

Our exclusive XHD electrodes provide top quality

solutions including wear preventive coating, joining
and overlaying reclamation applications.
Maintenance-designed with controlled chemistry and
deposit structure, they bring an improved
Life Prolonging Factor (LPF) to increase the
service life of parts treated,
plus Maximum Safety Margin (MSM).
XHD technology features enhanced weldability, even in
position, slag which is self lifting.
High deposition speeds and yield to keep heat input
to a minimum to reduce the danger of overheating,
structural changes or distortion of the workpiece.

STEEL WELDING ELECTRODES

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Machine frames, supports, pressure piping & TENSILE STRENGTH: > 550 MPa
6666 tubing, flanges, angles, beams, channels, joints subject to stresses. YELD STRENGTH: > 430 MPa
EUTECTRODE OUTSTANDING FEATURES: “Welder Friendly’’ - Ease of Deposition; All ELONGATION (l = 5d) > 25-30%
position; Superior Elongation Characteristics; Superior Impact Strength. IMPACT STRENGTH: approx. 60 J (-30°C)
RECOMMENDATIONS: An advanced Bipherically extruded flux coated, low SERVICE TEMP.: 350°C to 30°C
hydrogen electrode for use with low to medium Carbon steels (max. 0.4 carbon
equivalent), construction steels, Galvanized steel, Rusty or Oily steels, low alloy
steels containing Mn, Cr, Mo, V; free machining steels and Quench & Tempered
steels.

PRINCIPAL APPLICATIONS: Containers, ducts, tanks TENSILE STRENGTH: 520MPa

777 OTHER USES: Machine guards; angle iron and expanded metal 75,000 PSI
DYNATRODE OUTSTANDING FEATURES: All position; Works off all AC or DC power sources;
Instantaneous strike/re-strike; Ideally suited to single pass filleting.
RECOMMENDATIONS: For low carbon steel sheet, forms, and plates. Easy to
use. Rapid deposition, excellent deposit appearance and self-releasing slag. A
universal, all position, mild steel welding electrode, producing quality weld
deposits with superb bead appearance, regardless of power source, current or
polarity. Arc is quiet, producing a spray type deposition with a high degree of arc
ionization. Superior wash in filleting applications. Especially recommended as a
contact electrode.

PRINCIPAL APPLICATIONS: CE9450 can be used for joining and overlaying tool TENSILE STRENGTH: 800 MPa
CE 9450 steels, high alloy steels and dissimilar combinations in highly stressed parts. YIELD STRENGTH: 650 MPa
EUTECTRODE ELONGATION (l = 5d): 20-25%
HARDNESS, AS DEPOSITED: 250-300HB

PRINCIPAL APPLICATIONS: Dies, tools, springs, cushion layer TENSILE STRENGTH: 830MPa
680 CGS OTHER USES: Joining dissimilar steels; machinable build-up and overlay 120,000 PSI
XUPER OUTSTANDING FEATURES: Controlled grain structure/strength and ductility;
Spray type metal transfer; Superb weldability for all steels; Low amperage easy
strike-restrike.
RECOMMENDATIONS: FrigidArc coating plus high-alloy core generates highly
ionized arc for "spray-type" transfer of weld metal. Outstanding strength and
corrosion resistance with ease of handling and uniformity. NucleO CGS provides
controlled grain structure for high strength, high elongation, toughness and
ductility. For combinations of similar and dissimilar steels, and joining steels of
different thicknesses. Use for SPEED and ECONOMY as well as HIGHQUALITY
welds.

Continues…

Your Resource For Protection, Repair and Joining Solutions

Welding Electrodes - Continuation

STEEL WELDING ELECTRODES

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Stressed parts subject to cracking, e.g. TENSILE STRENGTH: 620 MPa
XHD 2222 screens, lifting lugs etc. 90,000 PSI
OTHER USES: Massive sections joining, tyres, gears, dissimilar metal
combinations.
OUTSTANDING FEATURES: Outstanding Elongation - up to 45%; Outstanding
Toughness and Strength; Multi-Pass Deposits on Massive Sections; X-Ray Quality
Welds; Ultimate for Heat Cycling Service.
RECOMMENDATIONS: Excellent weldability, mechanical strength, crack and
corrosion resistance. Joining and weld protective coatings on all steels, especially
difficult to weld types. Low, medium, high carbon - low, medium, high alloy -clad
steels, 9% nickel steels, cryogenic steels, all nickel alloys - monel Inconel,
Hastealloys, Nimonics, Nichrome. Ideal for use in various applications in
earthmoving equipment, manganese steels, dams, axles etc.

PRINCIPAL APPLICATIONS: Earthmoving equipment, extrusion cylinders TENSILE STRENGTH: 800MPa

XHD 6868 & screws 115,000 PSI
OTHER USES: Coupling sleeves,valve seats,cushion layer for TeroCote
overlays, jack cylinders
OUTSTANDING FEATURES: Remarkable deposition characteristics; Easy slag
removal; All position; High resistance to cracking
RECOMMENDATIONS: Electrode with high yield and extremely high deposition
speed for overlay, repairs and joining of "difficuIt-to-weld" steels. Solves the
everyday problem steel welding applications in industry. Use for high strength,
ductile joining and cladding of carbon and alloy steels, including tool and die,
spring and manganese steels.

7018RS is a premium quality, iron powder low hydrogen electrode designed for TYPICAL TENSILE STRENGTH: 524Mpa
7018 joining construction grade and problem steels. The product features a moisture TYPICAL YIELD STRENGTH : 476Mpa
Low guard™ coating to minimize hydrogen embittelment and underbead cracking. ELONGATION (in 50mm): 31 – 33%
Weldability is excellent on both AC and DC reverse polarity. The first choice for REDUCTION IN AREA: 75 – 80%
Hydrogen x-ray quality welds featuring high impact resistance.
TECHNICAL SPECIFICATIONS: AWS/ASMESFA 5.1 E7018 ;
AS/NZ E4818-AH10
PRINCIPAL APPLICATIONS: Used primarily on carbon and medium tensile
steels, especially under conditions of restraint. Excellent for high sulphur and
tramp steels. Used extensively on construction grades for shipbuilding, pipelines,
boilerplate, cast steel and cryogenic grades.

Alloy developed for coating high and low alloy steels and tool-steels. HARDNESS AFTER WELD: 420-520 HV
XHD 6804 PRINCIPAL APPLICATIONS: Draw plates, chucks, plungers for
hot-extrusion HARDNESS AFTER
OTHER USES: Stamping and trimming dies, kiln parts, pump shafts. WORK HARDENING: 480-580 HV
Coating of parts subjected to wear from metal on metal friction at
temperatures up to 650°C.
OUTSTANDING FEATURES: Contact heat quickly removed; Maximum hardness
after one pass; Excellent resistance to metal on metal friction up to 650°C;
Extensive overlays possible without any risk of overheating; Very tough and
creep resistant; Bonding layer normally not necessary; Exceptional weldability;
Very good resistance to oxidation.
WELDABILITY: Exceptional welding capabilities with a stable arc and perfect
metal transfer; Smooth flow without spatter; Excellent wetting; Slag easily
removed; Good appearance with perfectly regular beads.

Your Resource For Protection, Repair and Joining Solutions

Welding Electrodes - Continuation

STAINLESS STEEL WELDING ELECTRODES

Product Applications / Features Mechanical Properties

StainTrode 308-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 600 MPa.
308 AN ALL PURPOSE AUSTENITIC STAINLESS STEEL ELECTRODE FOR ELONGATION IN 50mm: 35%
(E308-17) WELDING 18/8 CHROMIUM-NICKEL STAINLESS TYPES 301, 302, 304,
305 AND 308.
EUTECTRODE USES: For metallic arc welding 18/8 and 19/9 types of stainless steel in all
positions. Use for joining or overlaying. Ideal as a protective overlay on steel
where medium hardness and complete corrosion resistance are required. For
applications requiring excellent resistance to impact, heat and scaling.

StainTrode 309-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 600 MPa
309 STAINLESS STEEL ELECTRODE FOR WELDING STAINLESS STEEL ELONGATION IN 50 mm: 30%
(E309-17) TYPE 309.
USES: High strength metallic arc welding of type 309 stainless steel. Typical
EUTECTRODE applications are welded furnace parts, heat exchangers, heat treating fixtures,
annealing boxes and covers, mufflers. All position.

StainTrode 310-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 655 MPa
310 FOR WELDING TYPE 310 STAINLESS STEEL WHERE HIGH STRENGTH AND ELONGATION IN 50 mm : 30%
(E310-17) OXIDATION RESISTANCE AT ELEVATED TEMPERATURE IS NEEDED.
USES: For metallic arc welding stainless steel types 310 and 314. Also used for
EUTECTRODE types 403, 405, 410, 430, 442 and 446 when preheat and post heat are not
possible. (Deposits are not heat treatable.) Especially suitable for elevated
temperature applications. Typical applications: Heat exchangers, heat treating
boxes, furnace parts and stainless to mild steel.

StainTrode 316L-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 595 MPa
316L A MOLYBDENUM BEARING EXTRA LOW CARBON AUSTENITIC ELECTRODE ELONGATION IN 50mm: 30%
(E316L-17) FOR WELDING TYPE 316L STAINLESS. EXCELLENT RESISTANCE TO
PITTING CORROSION.
EUTECTRODE USES: For arc welding of molybdenum bearing stainless steel type 316L in the
fabrication of equipment and chemical vessels. Deposits provide excellent
resistance to pitting corrosion caused by sulphuric acid and other acids used in
metal-treatment, petrochemical and pharmaceutical industries.
CHARACTERISTICS: Weld deposits match type 316L stainless steel base metal
in chromium, nickel and molybdenum content. Also suitable as a protective
overlay on steel where medium hardness and high corrosion resistance are
required. All position operation.
StainTrode 316L-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 595 MPa
316L A MOLYBDENUM BEARING EXTRA LOW CARBON AUSTENITIC ELECTRODE ELONGATION IN 50mm: 30%
(E316L-17) FOR WELDING TYPE 316L STAINLESS. EXCELLENT RESISTANCE TO
PITTING CORROSION.
EUTECTRODE USES: For arc welding of molybdenum bearing stainless steel type 316L in the
fabrication of equipment and chemical vessels. Deposits provide excellent
resistance to pitting corrosion caused by sulphuric acid and other acids used in
metal-treatment, petrochemical and pharmaceutical industries.

StainTrode 312-17 AC-DC Rev., For Stainless Steels TENSILE STRENGTH: 800 MPa
3026 A HIGH STRENGTH DUPLEX FERRITE/AUSTENITIC STAINLESS STEEL FOR ELONGATION IN 50mm: 22%
EUTECTRODE WELDING 29/9 Cr-Ni STAINLESS AND DISSIMILAR TYPES.
USES: Use with all steels—mild, stainless, spring, tool, high alloy and manganese
steels. Especially useful for joining and cladding dissimilar and unknown steels.

PROPERTIES: Very good resistance to pitting, crevice corrosion and stress YIELD STRENGTH: 650MPa
2209 corrosion cracking in chloride containing agents up to service temperatures of TENSILE STRENGTH: 850MPa
(E2209-17) 250°C. HARDNESS: 240BHN
Polishable to full brightness.
EUTECTRODE TECHNICAL DATA: AWS A5.4: E2209-17 ; SFA 5.4: E2209-17 ; prEN 1600:
E 22 9 3 L R 26 110 ; DIN 8556: ~ E 22 9 3 L R 26 110 ; M.-No.:: ~1.4462
Typical composition of the weld metal in %: 0,02 C - 0,9 Si - 0,9 Mn - 22,5 Cr -
9,5 Ni - 3,1 Mo - 0,14 N - Base Fe
For welding of ferritic-austenitic duplex-steels, i.e.: X2 CrNiMoSi 19 5, X2
CrNiMoN 22 5 3 – 2205 and for mixed joints with un- and low alloyed structural
steels, as well as austenitic stainless steels.

Your Resource For Protection, Repair and Joining Solutions

Welding Electrodes - Continuation

CAST IRON WELDING ELECTRODES

A pioneer in the welding of cast iron, C+E today offers a range of solutions for all needs.
These have in common a low heat input for minimum distortion and many other
features important in maintenance welding, such as easy striking and improved weldability
C+E alloys produce attractive non-porous and crack free deposits, which are easy to machine.
They are applicable even on old and contaminated cast iron parts.

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Pump housings, pump rotors TENSILE STRENGTH: 335MPa
2-44 OTHER APPLICATIONS: Compressors, valves, gear boxes 53,000 PSI
XYRON OUTSTANDING FEATURES: Controlled penetration; Oxide-dissolving arc;
Either polarity with DC; Non-conductive coating prevents side arcing.
RECOMMENDATIONS: For all types of machinable repairs on old,
contaminated, oil-soaked grey and alloyed castings, especially maintenance work
in position. Controlled penetration provides sufficient force to penetrate surface
contaminants, but prevents excessive base metal dilution. Sound, dense deposits
are fullymachinable. Used for thin as well as thick sections. Especially suitable for
joining cast iron to steel.

PRINCIPAL APPLICATIONS: Nodular iron castings, housings TENSILE STRENGTH: 380-415MPa

2240 OTHER APPLICATIONS: Foundry defects, cast iron die cladding and 55-60,000 PSI
XUPER buildup
OUTSTANDING FEATURES: Nodular deposits provide improved crack-
resistivity, exceptional all-position weldability and excellent machinability.
RECOMMENDATIONS: For superior penetration of contaminated surfaces on all
ductile iron, such as nodular (spheroidal graphite) and malleable, as well as grey
cast iron applications and fabrication to steel. Fully machinable. Recommended
for crack-resistant joining, overlaying, building up and filling porosity. Use on
both heavy and thin sections.

PRINCIPAL APPLICATIONS: Machine bases, Valves TENSILE STRENGTH: 495 MPa

2233 OTHER APPLICATIONS: Pumps and differential housings, cast iron dies 72,500 PSI
XUPER OUTSTANDING FEATURES: For joints subject to hydrostatic pressure; Steel to
Cast Iron; Excellent crack resistance; Machinable deposits.
RECOMMENDATIONS: For crack-sensitive applications such as castings
involving hydrostatic pressure, joints under restraint, dissimilar thicknesses and
the general welding of very heavy sections. Excellent for joining cast iron to
steel. Circumferential pipe welds, especially heavy wall thicknesses, can be made
without danger of cracking. Dense welds are completely machinable.

General purpose cast iron, high volume repair. TENSILE STRENGTH: 380 MPa
3055 DESCRIPTION: CasTec 3055 is a specially balanced nickel/iron alloy coated
CasTec electrode designed for welding a great variety of cast irons. Deposits are dense
and free of cracks. The FrigidArc coating with strong drive produces an easy-to-
maintain arc. CasTec 3055 can be deposited in all positions: overhead, vertical,
horizontal or flat.
It is recommended for high volume welding because of the alloy’s easy handling
and rapid deposition capabilities.
BASE METALS: Recommended for welding alloy cast irons as well as steel to
cast iron.

General purpose, machinable cast iron repair TENSILE STRENGTH: 365 MPa
3099 DESCRIPTION: CasTec 3099 electrodes are graphite coated and deposit a
CasTec nickel alloy with exceptional ductility, high tensile strength and good
machinability. The deposits are dense, crack free and base metal dilution is
minimized.
Use for joining, coating, building up missing sections, and filling cracks and
pores. Deposits are dense, porosity free, and machining is easy, even with a file,
because the deposit contains no hard spots, inclusions, entrapped slag, or cross
cracks.
BASE METALS: Recommended for grey cast irons. Weld steel to cast iron.

Your Resource For Protection, Repair and Joining Solutions

Welding & Hard Facing Open Arc (Flux-Cored) Wires - TEROMATEC®

Eutectic’s TEROMATEC open arc (flux-

cored) wires are available for mild steel,
stainless steel, alloy steels and cast
iron welding and wear facing
applications.

A flux cored wire is a tubular wire with a

metallic powder flux inside. The primary
advantage to flux cored wire over GMAW
or stick welding is higher deposition rates,
deeper penetration, improved bead
appearance and is more cost effective.

Flux cored wire has a larger ball type

transfer and produces low spatter levels.
In addition, flux cored wire produces a
rounder penetration profile with excellent
sidewall fusion.

Another advantage is that they can be used outdoors without the threat of the shielding gas being "blown away"
by the wind. The weld has a thick flux coating on it when it cools which can be easily removed.

TEROMATEC® OPEN ARC (FLUX-CORED) WIRES

Product Applications / Features Mechanical Properties

OA 56 is an economical flux cored open arc wire producing hard overlays suitable TYPICAL HARDNESS: 55-60 Rc
OA 56 for areas requiring abrasion and impact resistance.
FEATURES: Resists Abrasion; Resists Impact; Resists Metal to Metal Wear; Multi
Layer Build up (up to 3 layers).

Flux cored (gasless) wire for joining and overlay on cast iron, the nickel-iron TENSILE STRENGTH: 470 MPa
OA 223 weld metal provides a high strength machinable deposit which has a high YELD STRENGTH : 310 MPa
resistance to cracking with good base metal color match. ELONGATION: 16%
PRINCIPAL APPLICATIONS: For joining grey SG malleable irons; Casting
defect build-ups; Pump castings, motor bases, etc; Joining cast iron-steel
OUTSTANDING FEATURES: smooth running characteristic; can be used with
Co2 gas for higher voltage use where flat beads are required; can be used on
most cast irons and cast iron to steel

Semi-automatic application without shielding gas and without water cooling, for TENSILE STRENGTH: 620 MPa
OA 690 outdoor field welding of combinations of carbon and alloy steels. 90,000 PSI
NucleOCGS produces fine grain structure for high strength, crack resistance, ELONGATION (%): 50
excellent ductility, corrosion and impact/resistance. HARDNESS: Rb 80 - 90
PRINCIPAL APPLICATIONS: Structural steel, earthmoving equipment
OTHER USES: Tough, wear-resistant cladding
OUTSTANDING FEATURES: No shielding gas needed; Wide base metal
versatility; Impact, heat and corrosion resistance; Rapid deposition

For applications involving high-speed joining or build-up of large areas using TENSILE STRENGTH: 600 MPa
OA 2020 automatic and semiautomatic welding systems. Typical applications include 87,000 PSI
installation of wear plates, maintenance of heavy mining and construction
equipment and repair of tanks, railroad equipment and agricultural implements.
Not recommended for use in low temperature applications.
PRINCIPAL APPLICATIONS: Mining and construction equipment; agricultural
implements, repair of tanks, joining
OUTSTANDING FEATURES: No shielding gas required; Ideal for field
fabrication; Excellent for high deposition requirements; No stub loss; Easy slag
removal.

Continues…

Your Resource For Protection, Repair and Joining Solutions

Welding & Hard Facing Open Arc (Flux-Cored) Wires - Continuation

TEROMATEC® OPEN ARC (FLUX-CORED) WIRES

Product Applications / Features Mechanical Properties

Continuous electrode without shielding gas, for rebuilding and anti-wear coating HARDNESS HV: Approx. 300
OA 3110 of large parts, including guide rollers and running-gear components on tracked
vehicles.
OUTSTANDING FEATURES: Excellent resistance to deformation through
compression; Multipass deposits possible; Dense, highly magnetic deposit; High
deposition rate; For semi-automatic welding using drooping-characteristic power
sources.

High chromium manganese austenitic alloy for wear-preventive coating of carbon HARDNESS: Rc 25 work hardens to Rc 50
OA 3205 steels, low or high alloy steels and 14% manganese steels. Build-up and
surfacing on steel mill wobblers, rail frogs and crossovers, shovel pads and
crusher roll hammers. For use as a final overlay where impact is too great for
harder and less tough materials. Also use as a high strength joining alloy for
manganese, manganese to carbon, and manganese to several alloy steels.
Produces tough, strong, crack-resistant deposits that work harden. Deposits
resist deformation and spalling. Excellent cushion or padding for harder overlays.
PRINCIPAL APPLICATIONS: Steel mill wobblers, rail frogs; Crusher rolls,
hammers, shovel pads
OUTSTANDING FEATURES: No shielding gas needed; For build-up and overlay;
Excellent for high deposition applications; Excellent crack resistance; Deposits
resist deformation and spalling

Open-arc continuous electrode alloy for TeroCote wear protection on Low and HARDNESS: Rc 63
OA 3952 medium carbon steels, alloy steels, nickel alloys, and 12-14% manganese steels.
Provides exceptional resistance to abrasion and erosion at service temperatures
up to 1200F.
PRINCIPAL APPLICATIONS: Scoops ; augers ; buckets ; chutes ; scrapers ;
pan feeders ; bed liners ; rotors ; washing and desludging screws ; wear plates ;
shovel doors ; bulldozer blades, coal feeder screws ; exhaust fan blades ; Mixer
screws ; pug mill paddles ; feeder blades ; cement chutes ; crusher rolls; Sinter
breaker teeth ; augers and screw feeders ; coke dust recovery chutes ; exhaust
fans ; crusher rolls ; sinter bards ; sinter hammers.

Very high chrome alloy for all steels. Designed especially for severe abrasion HARDNESS: Rc 55 - 60
OA 4601 resistance. Typical uses include over-laying crusher rolls, jaw crushers, screw
conveyors, cement die rings, augers, tampers, hammers, gyratory crusher and
mantles, dredge pump parts, pusher shoes, catalyst pipes and valves and bucket
teeth.
PRINCIPAL APPLICATIONS: Crusher rolls, jaw crushers
OTHER USES: Screw conveyors, bucket teeth, augers
OUTSTANDING FEATURES: No shielding gas required; Excellent resistance to
all types of wear; Superior abrasion resistance; Good corrosion resistance
Equivalent Electrodes: EutecTrode 5003 / EutecTrode 6006

A gasless high-chromium-iron tubular wire used for severe abrasion applications. HARDNESS: 59 Rc
OA 4603 PRINCIPAL APPLICATIONS: For use on alloy steels, construction steels and WEAR (ASTM G65) mm3: 20
12-14% manganese steels that may include crusher equipment, conveyor
screws, earthmoving equipment, dredging pumps and buckets and mining slurry
pumps.
OUTSTANDING FEATURES: Weld deposits contain a high volume of primary
chromium carbides; excellent low stress abrasion resistance; outstanding
tolerance to dilution.
Equivalent Electrodes: EutecTrode 5003 / EutecTrode 6006

Your Resource For Protection, Repair and Joining Solutions

Welding & Hard Facing Metal Cored Wires - ENDOTEC®

ENDOTEC is a group of gas shielded, metal cored

alloy wires, ideal for maintenance and repair
applications or batch manufacturing where highest
integrity welding, efficiency and productivity are
required.

Castolin Eutectic ENDOTEC wires will provide:

 HIGHER DEPOSIT EFFICIENCY – 90 to 95%

(Flux-Cored wires = 80 to 90% ;
Electrodes = 60 to 70%)
 HIGH DEPOSITION RATES – 2 to 12 kg/h
(Electrodes = 0.5 to 4 kg/h)
 LESS DILUTION – 10 to 30%
(Flux-Cored wires = 15 to 30% ;
Electrodes = 25 to 30%;
Solid MIG wires = 20 to 30%)
 LOWER HEAT TRANSFER – less distortion
leading to more trustable deposits
 Wider Alloy Capability

ENDOTEC® METAL-CORED WIRES

Product Applications / Features Mechanical Properties

EnDOtec DO*02 has been developed for semiautomatic welding of difficult- TENSILE STRENGTH Rm: 650 MPa
EnDOtec to-weld steels and/or thick section steel parts. It is ideal for joining YIELD STRENGTH Rp0.2: 350 MPa
DO*02 dissimilar martensitic or austenitic stainless steels. It can be applied either ELONGATION A5: 30-40%
as a buttering layer or as an E+C TeroCote coating for protection against IMPACT STRENGTH: 70J 20°C; 55J-20°C;
impact and high pressure. 45J-60°C
TYPICAL APPLICATIONS: Armour plate, manganese steels; furnace HARDNESS AFTER WELDING: 180 VHN30
(10 Rc)
components; superheated steam outlets; for buttering layers, multi-pass
HARDNESS AFTER WORK
protective coatings; rail truck wheels; drive sprockets.
HARDENING: 350 VHN30 (35 Rc)
FEATURES: Up to 40% elongation, excellent crack resistance, high
resistance to metal/metal friction, very good resistance to thermal cycling
and oxidation at working temperatures of up to 600°C, excellent work
hardening, high ductility; slightly magnetic & machinable deposit.

An exclusive, small-diameter special alloy, EnDOtec DO*04 offers E+C HARDNESS AS WELDED:
EnDOtec TEROCOTE protective coatings of high hardness (~50 HRC in one pass) 500 - 540 HV30 Shielding gas 100% Ar
DO*04 ideal for machine parts subject to metal/metal friction cavitation, corrosion 480 - 520 HV30 Shielding gas 97.5% Ar 2.5 CO2
HARDNESS AFTER WORK
and oxidation at high temperatures.
HARDENING: 540 - 570 HV30
FEATURES: Excellent corrosion and oxidation resistance at temperatures Quenching temp: 1040°C, for hardness of
up to 650°C, excellent metal/metal friction resistance at high temperatures, 470 HV30
ideal for use as cladding with no risk of cracking (hardness ~50 HRC);
tough, creep resistant deposit; good corrosion resistance in high
temperature gaseous media: combustion chamber, diesel engine, valves,
etc.; no buttering layer necessary when coating heatresistant steels of
CrMo/CrMoV type; good corrosion resistance in saline environment, with
cavitation resistance.

EnDOtec DO*05 has been developed for protective coating of parts subject TENSILE STRENGTH Rm: 900 MPa
EnDOtec to impact, metal/metal friction and abrasion. This non-magnetic deposit, YIELD STRENGTH RpO.2: 580 MPa
DO*05 with a high content of chromium and manganese, is ideal protection for ELONGATION A5: 25-35%
carbon steels, high alloy steels and manganese steels. IMPACT STRENGTH: 70J-20°C; 50J-20°C
TYPICAL APPLICATIONS: For rebuilding applications, buttering layers HARDNESS AFTER WELDING: 25 Rc
HARDNESS AFTER WORK HARDENING: 43 Rc
and protective coatings on: Hammers and bars, Drills, Rollers, Dragline
teeth and leading edges, Drive sprockets.
FEATURES: High resistance to impacts pressure and metal/ metal friction,
exceptional work-hardenability.
Continues…

Your Resource For Protection, Repair and Joining Solutions

Welding & Hard Facing Metal Cored Wires - ENDOTEC® - Continuation

ENDOTEC® METAL-CORED WIRES

Product Applications / Features Mechanical Properties

The slag free deposit features a high density of hard, cast tungsten carbide DIN8555: MF 21-55-CGTZ
EnDOtec particles evenly distributed in a nickel alloy matrix which is further HARDNESS AFTER WELDING: ~55 HRC
DO*11 reinforced with very fine precipitates formed by recrystallisation. This gives MICRO HARDNESS OF CARBIDES: 2400 HV
exceptional resistance to abrasive-corrosive particles with moderate impact
and is specifically for service in hot or corrosive environments. Deposits are
crack resistant which prevents ingress and contamination by organic matter
or bacterial growth.

EnDOtec DO*14 has been developed as a protective overlay of parts TYPICAL HARDNESS: 45 Rc
EnDOtec subjected to combined wear phenomena: abrasion, impact and pressure. It
DO*14 is ideal for application on plain carbon steels, ferritic and martensitic steels,
both low and high alloy steels and manganese steels.
TYPICAL APPLICATIONS: Buckets and Shovels, Hot and Cold Shear
Blades, Hot Forming and Forging Dies, Excavating Equipment, Rams and
Punches.
FEATURES: Resists impact and abrasion; hard, tough deposits are crack
free; good heat-resistance for tooling applications to 500°C; deposits
respond to heat treatment; multiple layer capability. Deposits are
machinable with carbide tools; resists spalling and impact induced cracking;
available in 11.35kg (plastic spools) 300mm diameter in 1.2 and 1.6mm
diameter

EnDOtec DO*15 has been developed for protective coating of parts subject HARDNESS AS WELDED: 55-60 Rc
EnDOtec to combined wear phenomena: pressure, abrasion and severe impact. HEAT TREATMENT:
DO*15 The deposit is formable and can be heat treated. It is ideal for coating QUENCHING TEMP.: 1000-1060°C
carbon steels, both low and high alloy steels and manganese steels. HARDNESS: (cooling in oil or air) 57 Rc
TYPICAL APPLICATIONS: For the protective coating of drills, conveyor ANNEALING TEMPERATURE: 750-800°C
chains, gravel pumps, hot and cold forming tools. HARDNESS: 21 Rc
TEMPERING TEMPERATURE: 500°C
FEATURES: Magnetic deposit; very low dilution with base metal; very
Hardness = 55 Rc
stable arc for coating edges, precision coatings; available in 12.5kg wire 550°C = 55 Rc; 600°C = 48 Rc; 650°C = 40 Rc
cage in diameters 1.2mm and 1.6mm
EnDOtec DO*23 has been specifically developed for low heat input semi- TENSILE STRENGTH Rm: 470 Mpa
EnDOtec automatic joining, rebuilding and E+C TeroCote anti-wear protective coating ELONGATION A5 (%): 15
DO*23 of Cast Iron. It can also be used to join cast iron to steels. Exceptional HARDNESS AFTER WELDING: 190 HB30
crack resistance under high restraint.
TYPICAL APPLICATIONS: For spheroidal graphite cast iron, grey cast iron
and malleable cast iron workpieces, as well as for joining
cast iron to steels.; casings for pumps and valves; machine tool beds;
turbine sealing rings; textile industry machines; machining errors on
castings.
FEATURES: No cracks or porosity, even with multipass deposits; excellent
wetting and bonding on contaminated surfaces; no peening required for
joints that are not restrained; low heat input due to low welding current and
fast travel speed; very good crack resistance.

The deposit offers exceptional resistance to fine particle abrasion and HARDNESS AS WELDED: 63-68 Rc
EnDOtec erosion under moderate impact, thanks to a structural matrix which is
DO*30 tough and reinforced by extra-hard particles.
TYPICAL APPLICATIONS: For protective coating of parts most subject to
wear in activities such as public works, brick and tile, quarries, dredging.
It is especially suitable in mining/cement making for: mixer blades and
scrapers, rotary excavator buckets, auger flights
FEATURES: Alloy characteristics including hardness fully transferred in just
one pass; excellent weldability and arc stability, in all positions.

Continues…

Your Resource For Protection, Repair and Joining Solutions

Welding & Hard Facing Metal Cored Wires - ENDOTEC® - Continuation

ENDOTEC® METAL-CORED WIRES

Product Applications / Features Mechanical Properties

DO*48 has been designed specifically for antiwear protective coatings on HARDNESS (HRC): 55
EnDOtec carbon steels, alloy steels and cast iron. MICRO HARDNESS OF CARBIDES (HV): 2300
DO*48 TYPICAL APPLICATIONS include mining, quarries, drilling, tunneling,
public works, extrusion press parts, transport screws, mixer blades,
paddles, conveyors, scraper blades, cylinder crushers, pump rotors and
bodies, etc.
FEATURES: The slag-free deposit features a high density of hard, cast
tungsten carbide particles evenly distributed in a ferrous alloy matrix which
is further reinforced with very fine precipitates formed by recristallisation.
This gives exceptional resistance to abrasive-erosive particles combined
with moderate impact at ambient temperatures.

A stellite type alloy containing cobalt, chromium and tungsten, this deposit HARDNESS: 40-45 Rc
EnDOtec is especially suited for carbon steels, low and high alloy steels, stainless
DO*60 steels, manganese steels, nickel and monel.
TYPICAL APPLICATIONS: For protective coatings on valve shutters and
caps combustion and whirl chambers, screw conveyors for chemical and
food processing industries; woodworking tools; hot shear blades.
FEATURES: Excellent resistance to corrosion, erosion and cavitation, plus
resistance to metal/metal friction; low heat input for low dilution; ductive
deposit, machinable by cutting tool; high hot hardness; excellent bead
appearance, no spatter, stable arc, especially with arc modulation; Stellite 6
type deposit; available in 12.5kg wire cage in 1.6mm diameter.

Ideal for joining fabrication steels (550 N/mm2), and for reconditioning cast TENSILE STRENGTH Rm: 575 MPa
EnDOtec steel parts marred by shrinkage cavities. YIELD STRENGTH: 570 MPa
DO*65 TYPICAL APPLICATIONS: For applications requiring high deposition rates ELONGATION A5: 26%
with good penetration and excellent deposit mechanical properties, IMPACT STRENGTH: 100J 20°C
including: equipment used in public works; railway equipment; tanks,
containers; travelling cranes.
FEATURES: Exceptional metallurgical bonding; Yield superior to 95%;
excellent bead appearance; low hydrogen content for extra
resistance to cold cracking; excellent arc characteristics with short arc
transfer or spray transfer; all positional; available in 15kg plastic spool in
diameters 1.2mm and 1.6mm.

A stellite type alloy containing cobalt, chromium, nickel, molybdenum and HARDNESS AS WELDED: 300-350 VHN30
EnDOtec manganese this deposit gives work hardenable protective coatings suitable (33-37Rc)
DO*80 for carbon steels, low-to-high alloy steels, stainless and manganese steels, HARDNESS WORK HARDENED:
nickel and monel. 500 VHN30 (48 Rc)
TYPICAL APPLICATIONS: For protective coating applications on hot
cutting blades; stripper points; Forging, hot forming tools; valve seats;
extrusion press plungers.
FEATURES: Exceptional increase of hardness under impact; excellent
resistance to heat and corrosion; excellent resistance to metal/metal friction
combined with corrosion resistance; superior crack resistance, for both
repair and E+C Terocote protective coatings, over large surfaces; ductile
deposit, machinable by cutting tool; exceptional all-positional weldability;
Stellite 21 Type Deposit; available in 12.5kg wire cage in 1.6mm diameter.

Your Resource For Protection, Repair and Joining Solutions

 Welding & Hard Facing Metal Cored Wires - ENDOTEC® - Continuation

NANOALLOY® – EnDOtec DO*390N

EnDOtec DO*390N is a NanoSteel patented, gas shielded, metal cored alloy wire, ideal for maintenance and repair
applications or batch manufacturing where highest integrity welding, efficiency and productivity are required.
The slag-free deposit contains a high volume fraction of ultra-hard, complex borocarbides uniformly distributed
within an iron alloy matrix. The unique nanoscale type microstructure ensures exceptional performance against
wear by severe abrasion & erosion retaining elevated bulk hardness properties to 750°C.

Increased Service Life - NanoAlloy®'s are characterised by high volume fractions of ultra-hard, complex
borocarbides (M23(BC) 6), metal carbides (MC) and metal borides (M2B) which are very finely dispersed within an
alpha-Fe alloy matrix sub-micron refined.
Composite wearfacing alloys typically consist of ultra-hard, angular tungsten carbide phases suspended within a
relatively softer matrix binder (Ni or Fe based).
In service, erosive or abrasive particles will rapidly attack the softer matrix to gradually expose the harder WC
phases which either break or become detached. This effect is particularly evident when spherical shaped WC phases
are involved.
The resultant lost wear resistance causes premature failure or shorter service life with associated costly downtime
losses.
The same erosive or abrasive particles are thus unable to attack any “weak spots” due to the high, homogeneous
wear resistance throughout the entire NanoAlloy® deposit.
This results in longer, reliable service life, lower operating costs and significant productivity gains.

Less Weld Metal Required - It is important to understand that for any given wearfacing deposit volume requirement,
37% LESS kg are necessary with DO*390N due to its lower density (7.6 gm/cc) compared with Ni + WC based
alloys (12 gm/cc) .

It was developed for protective coatings with extreme resistance to abrasion and erosion on carbon steels, alloy
steels and stainless steels. Typical industries include steel, cement, waste recycling, power generation, foundries,
chemical processing, mining, materials handling,
petrochemical, etc. Transport screws, furnace chutes, exhaust fans, cyclones, conveyors, mixer blades, paddles,
scrapers, press screws, material screens etc.

Examples:

Cutting Teeth – Dredging Industry Bucket Teeth – Quarry Industry Pump Rotor – Coal Mining
Abrasion + Impact Resistance Abrasion + Impact Resistance Slurry Erosion Resistance

Schredder Hammer – Waste & Recycling Clay Mixer Screws – Brick & Tile Sinter Crusher Hammers – Steel Proc.
Abrasion + Impact Resistance Abrasion Resistance Abrasion + Impact + Heat Resistance

Your Resource For Protection, Repair and Joining Solutions

Wear Facing Electrodes & Rods

WEAR FACING WELDING ELECTRODES

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Dredger teeth, buckets, shovels HARDNESS: Rc 60-65.
700 OTHER USES: Conveying equipment, cultivators
ABRATEC OUTSTANDING FEATURES: Extra hard abrasion resistant overlays on steels;
Withstands severest wear; For carbon, alloy & manganese steels; Minimal
dilution.
RECOMMENDATIONS: For hard overlays on wearing surfaces and edges
exposed to heavy and severe abrasive wear. Typical applications include:
dredger teeth, buckets, conveying equipment, conveyor screws, shovels,
cultivators, skids, pulverizers, excavator parts and all other applications where
abrasion is encountered. For hard protective coatings on new parts such as chisel
points, and plough shares. Because of the excellent wear characteristics and low
dilution of the base metal, parts will outwear uncoated parts by as much as
500%.

PRINCIPAL APPLICATIONS: Augers, screws, conveyors HARDNESS: Rc 57-60.

6006 OTHER USES: Scrapers, paddles and wear pads
CHROMCARB OUTSTANDING FEATURES: High hardness at elevated temperatures; NucleO-C
catalyst for superior wear resistance; Superior for abrasion accompanied by
impact; Excellent compressive strength
RECOMMENDATIONS: Deposits are highly resistant to abrasive wear, especially
when accompanied by impact and/or in oxidizing or corrosive atmospheres. Its
special FrigidArc coating permits contact welding. Arc stability and smooth metal
transfer reduce dilution of base metal, to maintain the highest degree of
hardness. Good slag cover reduces cooling speed to protect against danger of
cracking. Use to overlay carbon and alloy steels, manganese steel and cast iron.
Where high impact is involved, a buffer layer of EutecTrode 40 is first
recommended.

PRINCIPAL APPLICATIONS: Tractor sprockets, rollers, concrete mixer HARDNESS: Rc: 28-32
2B blades, hammers and cushion layers for harder coatings.
EUTECTRODE RECOMMENDATIONS: For use on ferrous metals that require precision
machining for finishing where the surface is subjected to mild abrasion with
heavy impact or pressure. Excellent as a cushion for hard surfacing.
OUTSTANDING FEATURES: Resists: Mild Abrasion; High Impact; High
Pressure; Fully machinable deposits; Dense, porosity free welds.

PRINCIPAL APPLICATIONS: Hot forging, cutting tools, die stamps HARDNESS: Rb 530-95
6800 OTHER USES: Vats, retorts, pipe lines, pumps, pickling/plating tanks Work hardens to Rc 30-35.
EUTECTRODE OUTSTANDING FEATURES: Machinable deposits have unusual hot toughness; TENSILE STRENGTH: 585 MPa
Resists deformation from static or cycling loads at high temperatures; Resistance 85,000 PSI
to oxidizing acids.
RECOMMENDATIONS: For overlaying hot metal handling implements.
Unsurpassed resistance to oxidizing acids, mixed acids, salts and chlorine-
bearing compounds at normal to elevated temperatures. Recommended for
overlaying or joining dissimilar high alloys, particularly of the nickel-based types
such as the Hastelloys, Inconel and the Illiums, or for joining these alloys to
mild, low alloyed or stainless steels.

PRINCIPAL APPLICATIONS: Blades, scrapers, ash conveyors HARDNESS: Rc 68-72

N112 OTHER USES: Augers, tongs
ULTIMIUM OUTSTANDING FEATURES: Deposits solid, homogeneous tungsten carbide;
NucleO-C catalyst for optimum wear; Ultimate resistance to abrasion and
friction; Super-hard overlays on all steels.
RECOMMENDATIONS: Deposits are rich in homogeneous tungsten carbide.
Superior density throughout with uniform hardness. Overlays to be contour
ground will offer highest resistance to abrasion and friction, and provide impact,
heat and corrosion resistance similar to solid tungsten carbide. For frictional and
abrasive applications.

PRINCIPAL APPLICATIONS: For cobalt based wear resistant coatings Specific gravity: 8.59
N9010 OUTSTANDING FEATURES: CastoDur 9010 shows a fine microstructure Co-eff. Exp: 12.10
CASTODUR consisting of cobalt rich matrix with precipitates of Chromium and Tungsten HARDNESS: 55060 HV
carbides. It has a good resistance to pressure and impact. It also has good all-
round resistance to the secondary wear factors, particularly corrosion and heat.

Continues…

Your Resource For Protection, Repair and Joining Solutions

Wear Facing Electrodes & Rods - Continuation

WEAR FACING WELDING ELECTRODES

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Valve seats, pump shafts, sleeves HARDNESS: Rc 40-45
N9060 OTHER USES: Timber cutters, screw conveyors
EUTECDUR OUTSTANDING FEATURES: Exceptional resistance to corrosion, abrasion, heat,
friction and impact; Retains hardness over a wide range of temperatures; Good
hot and cold cutting properties.
RECOMMENDATIONS: For applications which require an overlay, with hot
hardness and/or corrosion resistant properties, particularly in range 650°-800°C.
Use for overlaying acid pump shafts, screw conveyor blades, blades for grinders
and crushers, valve seats and faces. In fact on any moving parts in contact with
corrosive gases, acids, petro-chemicals etc. Ideal for edging hot cutting blades.

PRINCIPAL APPLICATIONS: Hot forging, cutting tools, shear blades HARDNESS: Rc 30

N9080 OTHER USES: Extrusion dies, ingot tongs, steam valves, seats WORK HARDENS TO: Rc 45-50
EUTECDUR OUTSTANDING FEATURES: Resistance to impact, friction and abrasion; High
edge retention at elevated temperatures; High machinability; Resistance to
corrosive and oxidizing media.
RECOMMENDATIONS: EutecTrode 9080 works well on all carbon and alloy
steels. It is well suited to overlays on curved and contoured surfaces. Use for
parts which operate under high temperature and/or pressure combined with
wear factors such as friction, impact, oxidation and corrosion.

PRINCIPAL APPLICATIONS: lngot tongs, forging dies, press dies and HARDNESS: Rc 22 - 28
6899 XHD punches, cutting and trimming dies. WORK HARDENS TO: Rc 36 - 42
OUTSTANDING FEATURES: Excellent Resistance to impact plus heat; Will TENSILE STRENGTH: 740 MPa
not chip or spall, resists cracking; High resistance to corrosion and 106,000 PSI
oxidation.
RECOMMENDATIONS: XHD 6899 is a key repair alloy in any industry where
metal is worked, and especially where the working equipment is subjected to
heat as well as impact and corrosion. Since such metal-working operations occur
in a broad cross-section of industry, applications for XHD 68-99 can be
pinpointed by operation more readily than by industry.
Cold-heading, Shearing, Drawing, Spinning, Extruding, Stamping, Forging,
Swaging, Hammering, Trimming, Punching, Twisting, Rolling.

For superior resistance to abrasion and mild impact/pressure. Hardness: 55-60 Rc

5003 DESCRIPTION: Eutectic 4004/5003 weld deposits consist of dense, tough
matrix containing uniform/dispersed needles of hard complex chromium
carbides. The well balanced combination of alloying elements provides Eutectic
4004/5003 with its excellent resistance to abrasion, even when combined with
other service conditions, including impact, corrosion and/or higher than normal
temperatures.
MAIN FEATURES: Excellent resistance to: Abrasion, Impact,
Pressure,Corrosion; Smooth deposits help reduce wear; Low dilution with base
metal

PRINCIPAL APPLICATION: Composite high-speed-steel dies HARDNESS: Rc 58-62 (as welded)

6HSS OTHER USES: Tools, trimming dies, shears, punches
TOOTECTIC OUTSTANDING FEATURES: Heat treatable deposits; High speed steel overlays;
Excellent cutting, shaving and piercing qualities; All position electrode.
RECOMMENDATIONS: Provides maximum hardness of edges at high
temperatures. For use where cutting, shaving, or piercing qualities are required.
Excellent for knife edges, and machine tool parts subject to heavy frictional
wear. Ideal for building composite blanking or punching dies.

PRINCIPAL APPLICATIONS: For overlay and joining manganese steels YIELD STRENGTH: 415 MPa
40 OTHER USES: Buckets, teeth, crushers, hammer mills 60,000 PSI
EUTECTRODE OUTSTANDING FEATURES: Can be flame cut; All position electrode; TENSILE STRENGTH: 795 MPa
Withstands severe impact and compression; Undiluted deposits, non-magnetic 115,000 PSI
RECOMMENDATIONS: All positional electrode for cladding and joining HARDNESS: Rb 80-90
manganese steel and joining manganese steel wear plates, pads, etc. to carbon WORK HARDENS to Rc 45-50
and lowalloy steel structures such as buckets, shovels, crusher jaws etc. It. is
also used for increasing the service capability of carbon and low alloy steels by
adding a work-hardening manganese steel surface. Weld deposits of EutecTrode
40 feature superior resistance to severe-impact and compressive forces.

Your Resource For Protection, Repair and Joining Solutions

Wear Facing Electrodes & Rods - Continuation

WEAR FACING BRAZING ALLOYS

Product Applications / Features Mechanical Properties

PRINCIPAL APPLICATIONS: Gear teeth, shafts, bearing seats HARDNESS: 130 BHN as deposited
18XFC OTHER USES: Propellers, pump impellers 200 BHN work-hardened
EUTECROD OUTSTANDING FEATURES: Outstanding frictional wear resistance; Contains BONDING TEMPERATURE: 760°-850°C
Atmosin for double action cleaning; Highly machinable, non-peeling; Excellent TENSILE STRENGTH: 585 MPa
control on multi-pass build-ups. 85 000 PSI
RECOMMENDATIONS: Atmosin in flux for superior cleansing/deoxidizing and
wettability, with no smoke, fumes or glare. For overlays on surfaces requiring
high resistance to frictional wear. Superior weldability and control. Ideal for
building up broken or worn gear teeth, worn bearings, valve seats and pistons.
Tough, high strength joints.

PRINCIPAL APPLICATIONS: Junk bits, rotary cutting tools

8800 OTHER USES: Masonry drills, horseshoes, earthmoving equipment
DRIL-TEC OUTSTANDING FEATURES: Low temperature manufacture preserves carbides;
Utmost abrasion resistance and cutting action; Atmosin for double action
cleaning.
RECOMMENDATIONS: Composite rod of unique structure to deposit hard
carbides uniformly within a nonferrous matrix. Controlled low temperature
manufacture preserves deoxidizers in alloy, and sharpness and angularity of
carbides. Tungsten carbide chips can be applied for specialized applications to
cast iron, steel and copper alloys. Excellent for abrasion and impact applications
as extremely tough copper alloy matrix withstands extensive shock loading.
Improved weldability permits bonding at well below the critical temperatures of
ferrous metals. Especially advantageous for improvising carbide-tipped drills.
Carbide Mesh Size Ranges: 6.2mm + 5.0mm ; 5.0mm + 3.2mm ;
3.2mm + 1.5mm

PRINCIPAL APPLICATIONS: Guide plates, scrapers, mixer blades HARDNESS: Tungsten Carbide
8811 OTHER USES: Teeth, drill heads, mud pump rotors MAXIMUM SERVICE TEMP.: 700°C
ULTIMIUM OUTSTANDlNG FEATURES: Resistance to abrasion and cutting action; Uniform
distribution of virgin carbides for longer
wear life; No melting of base metal
RECOMMENDATIONS: For TeroCote protective coatings on steels, nickel alloys
and cast iron. Deposits tungsten carbide in a nickel alloy matrix, to resist cutting
type wear. Deposits have maximum concentration of extra hard virgin carbides
with sharpness and angularity. Excellent resistance to cutting, abrasion, erosion,
corrosion and heat.
SIZE* 5mm dia.

PRINCIPAL APPLICATIONS: Cams, augers, mixer blades HARDNESS: Rc 55-62

9000 OTHER USES: Patterns, guides, screws BONDING TEMPERATURE: 965°C
EUTECBOR OUTSTANDING FEATURES: Polishes in service; Low heat application; High
hardness and corrosion resistance; Outstanding frictional wear resistance
RECOMMENDATIONS: For TeroCote protective coatings requiring severe
abrasion-and-corrosion resisting deposits, and compressive load strength at
elevated temperatures. For use on steel, alloyed steel, cast iron, high chromium
and nickel alloys. Non-magnetic and nonheat treatable. Deposits accept a high
polish andresist pitting and galling.

Carbide-bearing cord for flame process for heavy duty protection against Hardness, matrix (HV30): ~370
7888T erosion and abrasion Micro-hardness, carbides (HV1): >2300
DESCRIPTION: 7888 T is a high-performance anti-wear product in the form of a Carbide granulometry (mm): 0.2-0.7
flexible cord, comprising a nickel core wire, covered with an elastic binder Cord diameter (mm): 5.0
containing a mixture of carbides and nickel alloy powder. The latter has a Core wire diameter (mm): 1.2
uniquely effective self-fluxing action, which gives 7888 T outstanding wetting Max. service Temperature (°C): ~700
properties. As a result, a smooth, even protective coat can be deposited quickly
and easily, greatly reducing the risk of overheating the base material. Each spool
of 7888 T carries one continous length of cord of rigorously consistent diameter
and without joins, for improved reliability with automated or robotics feeder
systems. 7888 T deposits an extremely durable protective coating comprising a
dense mass of ultrahard tungsten carbides (~65% by weight) embedded in a
tough nickel-chromium alloy matrix. This structure offers extremely effective
protection against erosive and abrasive attack by a wide variety of materials. The
matrix composition helps to absorb impact and improves resistance to corrosion,
while the angular profile of the finely crystallised carbides makes it very difficult
to dislocate them from the matrix. Deposit appearance: smooth, matt metallic-
grey

Your Resource For Protection, Repair and Joining Solutions

MIG Solid Welding Wires

MIG SOLID WIRES

Product Applications / Features

For low hydrogen gas shielded arc welding of mild steels, low and medium carbon steels. Copper coated, double-deoxidised
GS 70S-4 wire for better, stable arc action. Use with Ar-base or C02 gas shielding.
AWS A5.18 ER70S-4
Precision wound GMAW wire for mild and medium strength steels. Copper coated, wire tensile strength 500 MPa
GS 70S-6
AWS A5.18-ER70S-6
The wires have a rutile base slag. They are used DC electrode positive with C0 2 and Argon C02 shielding gases. C02 shielding
GS 71T-1 provides a globular transfer whereas Argon C02 produces a spray transfer. Lower arc voltages are recommended for Argon
AWS A5.18-20 E71T-1 shielding gases. Slag coverage is full and generally self-removing.
The wires have a lime fluoride base slag and are often referred to as Basic wires. They are designed for DC electrode
GS 71T-5 negative with both C02 and Argon C02 shielding gases. Slag coverage may not be complete and slag is easily removed. Weld
AWS A5.20-E71T-5 deposits from basic wires generally have better impact and crack resistance to wire from the rutile group.
AS2203-1 – 1990
A gas shielded 308 stainless steel wire for welding 18/8 stainless steel such as 304L, 304N, 304LN, 304, 304N, 321, 347.
GS 308L GS308L produces a lowcarbon 20/10 stainless steel designed to give good resistance to corrosion. High silicon content gives
AWS A5.9 ER308LSi good arc stability and fluidity producing excellent weld appearance with minimal porosity and spatter particularly in short
circuit transfer.
A gas shielded 309L stainless steel wire designed for welding stainless steel 304 and 18/8 stainless when severe corrosion
GS 309L conditions exist. Also used for welding stainless to mild steel and for joining 304 and 18/8 clad stainless. Can be used for
AWS A5.9 ER309LSi GTAW and SAW if desired.
A gas shielded 29/9 stainless steel wire suitable for the GMAW, GTAW and SAW process. Produces high strength, crack
GS 312 resistant joints and can be used for welding stainless to mild steel and dissimilar stainless steels.
AWS A5.9 ER312
A gas shielded 316L silicon bearing stainless steel wire suitable for the GMAW and GTAW process. Produces low carbon weld
GS 316L metal of the 18/13/3 type with excellent resistance to corrosion. Contains high silicon to give better arc stability and better
AWS A5.9 ER316LSi fluidity.
A gas shielded 19/9 Niobium stabilized stainless steel wire designed for welding Ti and Nb/Cb stabilised 18/10 stainless
GS 347 steels. Used for high
AWS A5.9 ER347 temperature applications above 400°C. The stabilized weld deposit provides resistance to intergranular corrosion. GS347 can
be used for GMAW, GTAW and SAW if desired.
A gas shielded aluminum - 5% Silicon alloy wire suitable for use with GMAW, GTAW, PAW and electron beam welding.
GS 4043 AL GS4043 can also be used with the oxy-acetylene process if desired.
AWS A5.10 ER4043
A gas shielded Aluminum - 5% Magnesium alloy wire suitable for use with GMAW, GTAW, PAW, and electron beam welding
GS 5356 AL etc. Used for welding 5XXX, 6XXX and 7005 alloys. Excellent for cryogenic applications.
AWS A5.10 ER5356
A gas shielded copper wire containing phosphorus and silicon as deoxidisers. Used for welding oxygen free, deoxidised, and
GS CU electrolytic tough pitch coppers. Can be used with oxy-acetylene process if desired.
AWS A5.7 ER Cu
A gas shielded aluminum bronze wire used for joining and overlaying aluminum bronze; manganese, silicon bronzes; some
GS ALBR 2 copper-nickel alloys, steels, cast irons and dissimilar combinations such as aluminum bronze to steel. GSALBR2 provides
AWS A5.7 ER Cu Al-A2 excellent wear and corrosion resistant surfaces.
Used for joining copper, brass, bronze including high strength bronze. Low coefficient of friction when running against steel
GS PHOSBR faces. Excellent corrosion resistance in salt water. Does not suffer from dezincification.
AWS A5.7 ER Cu Sn-A
A gas shielded silicon bronze wire used for welding copper, copper-silicon (Si bronze), copper-zinc (brass), alloys to
GS SILBR themselves and to steel. High corrosion resistance, strength and toughness. Canbe used with the oxy-acetylene process if
AWS A5.7 ER Cu Si-A desired.
Highly alloyed chrome molybdenum solid-wire continuous electrode, designed for the semiautomatic welding of non-alloyed
45252 steels, high-yieldpoint low-alloy steels and boiler-plate steels. The deposit is heat-tolerant and offers joints with service
CastoMag® temperature of up to 550°C. It also features good resistance to cracking caused by alkaline corrosion. The deposit’s inherent
AWS ER80S-B2 wear-resistant characteristics can be further increased by the application of nitriding and cementation treatments.
Gas shielded metal arc all positional copper coated wear facing wire, deposits are typical 35 Rc. For applications where
GS 35 abrasions with impact are a problem, resists spalling under impact and compressive wear. Suitable for multi pass build up.
Gas shielded metal arc all positional copper coated wear facing wire, deposits are heat treatable, deposits of up to 60 Rc. For
GS 60 applications where abrasions with impact are a problem, also suitable for elevated temperatures, resists spalling under
impact.
GS 110 is a low alloyed GMAW wire type Ni, Cr, Mo for joining high strength and quench and temper steels.
GS 110
GS 56 is an economical wire producing hard overlays (56 Rc) suitable for areas requiring abrasion and impact resistance.
GS 56 The weld metal is medium alloy martensitic steel useful for 2-3 layer applications.

Your Resource For Protection, Repair and Joining Solutions

TIG Welding Wires

TIG WIRES

Product Applications / Features

TeroCoating alloy for use on composite highspeed steel. For use where cutting, shaving or piercing qualities are
5HSS required. High speed-steel type deposit.
TIGTECTIC Rc 58-62 (as welded)
Rc 64-65 (heat treated)

For use with all Aluminium types and combinations, except where 5XXX series Al/Mg alloys form part of assembly.
21 An Aluminium/silicon alloy with good strength, ductility and corrosion resistance.
TIGTECTIC Tensile strength: 227 MPa

For joining copper, copper-silicon and copperzinc base metals to themselves and to steel. Ideal to weld galvanised
182 (45706) steel to minimize damage to zinc coating and help preserve corrosion resistance. A copper based alloy containing
TIGTECTIC silicon and manganese. High strength alloy with corrosion resistance generally equal to copper.
Tensile strength: 427 MPa

Joining and repair of dissimilar alloy steels. For high alloy, spring, tool and die steels. Very high strength joining. A
680 high chrome-nickel alloy. Good machinability.
TIGTECTIC Tensile strength: 827 MPa

A wear resistant alloy especially useful for high temperature applications. Oxidation resistance to 1000°C. A cobalt
906 base alloy with chrome and tungsten. "Stellite 6" type alloy
TIGTECTIC Hardness: 38-43 Rc

For applications requiring hardness with abrasion and erosion resistance. A cobalt base alloy with chrome and
912 tungsten. Mild impact conditions only. “Stellite 12’’ type alloy.
TIGTECTIC Hardness: 46-51 Rc

For joining and overlaying aluminium-bronze, copper alloys, other non-ferrous and ferrous materials. Excellent for
1851 joining copper alloys to steel. An aluminium-bronze alloy for high strength, ductile, corrosion resistant joining and
TIGTECTIC overlaying.
Tensile strength: 620 MPa
140-230 BHN

For joining and overlaying high nickel alloys and dissimilar metal combinations. Ideal for elevated temperature or
2222/45612 heat cycling applications. A nickel “super alloy’’ with high strength, exceptional elongation and corrosion resistance.
TIGTECTIC Excellent thermal cycling properties and oxidation resistance.
Tensile strength: 689 MPa

For welding 300 series 18/8 and 19/9, 304L.

TIG 308L AWS A5.9 ER308LS.

For welding types 309-309L dissimilar joints of 300 series to ferritic stress.
TIG 309L AWS A5.9 ER309LS.

For welding types 310 & 309.

TIG 310L AWS A5.9 ER310.

For welding 316 and 316L molybdenum brazing stainless also 304 3cr12.
TIG 316L AWS A5.9 ER316LS.

Joining and repair of dissimilar alloy steels. For high alloy, spring, tool and die steels. Very high strength joining. A
TIG 312 high chrome-nickel alloy. Good machinability.
Tensile strength: 827 MPa
AWS A5.9 ER312.

For welding duplex stainless steel 2205.

TIG 2209 AWS A5.9 ER2209.

Your Resource For Protection, Repair and Joining Solutions

Other Consumables

Product Applications / Features

A highly heat-resistant electrode whose special exothermic coating concentrates the force of the arc right at the point of
CHAMFERTRODE application, yielding a highly efficient metal removing tool. The concentrated force of the arc blasts the unwanted metal
from its path, leaving an ideal surface for subsequent operations. For production and maintenance operations where
chamfering and gouging is necessary, without the need for supplementary gases and extensive equipment. For
preparing sections prior to welding, gouging out old or defective weld metal, removing flash and risers, removal of
unwanted sections and excess metal.
ChamferTrode is designed for use on cast and malleable iron, low, medium and high carbon steel, alloy steel, stainless
steel, manganese steel and most other metals.

Chamfer and gouge all metals, using any of a wide range of power sources, including low amperage small AC welders.
EXOTRODE Ideally suited for veeing cracks prior to welding; rough machining; removal of bushings, rivet heads and studs. Also for
XUPER preparing sections, gouging out old or defective weld metal, removing flash and risers, excess metal; also cutting and
piercing.

DESCRIPTION: Material is straight grade or Wc + Co, i.e. no mixed crystals. Only selected raw material, which is graded before
TUNGSTEN manufacture, is used during reduction. Cobalt content on material varies between 6 and 8% per batch.
CHIPS TYPICAL GRADE SIZES:
MESH MILLIMETERS
16 x 20 1.18 x 0.85mm
12 x 20 1.7 x 0.85mm
10 x 16 2.0 x 1.18mm
20 x 30 0.85 x 0.60mm
12 x 16 1.7 x 1.18mm
12 x 30 1.7 x 0.60mm
Applied in conjunction with a MIG welding process using specially developed Eutectic wires e.g. GS60, GS35 to maximize matrix
hardness. GS70S4, GS70S6 are used for basic steel matrix.

Welding Equipment

 PowerMax – Powerful Inverter , Light and Compact , Manual Electric Welding and Tig Welding, 140 amp
Electrode Welding ,150 amp TIG Welding ; Available with either Safety Switch or VRD.
 CastoTIG 2202 – Smart, Light, Powerful 220 amp welding current from 240V mains. Flexible: Direct,
Alternating current, Intergated Pulse. Electrode and TIG; Versatile: Aluminium, Bronze, Copper & other
Alloys.
 CastoTIG 300 – Powerful AC/DC TIG Inverter, Continuously adjustable welding current; High power up to
300 amps output; Security Coded.
 TotalArc 271 – Digital Pulsed MIG/MAG/TIG/MMAW welding; Portable, Powerful, Versatile.
Programmable – 32 Synergic Programs; Up to 270 amps; 3 systems in one unit.
 CastoMig – Compact inert-gas-shielded arc welding machines from 160 amps 240 V mains to 500 amps
415 V. Available in both Pulsed and Standard MIG/MAG welding.
 ID Weld 2500 – Automatical internal bore welding system; Eliminates the need for bushes; For fast onsite
repair work, at low cost. For automatic production and batch work.
 AirJet – Portable Plasma Cutters; Light weight, operated with compressed air, centrally connected torch.
Lower power consumption; Long service life of wear; Cutting capability 20mm in industrial use.
 CastoCleaner – For cleaning and polishing stainless steel. Compact, automated design, electrochemical
cleaning system. Very easy to operate.

For more information on our welding equipment product line please consult our Equipment brochure.

Your Resource For Protection, Repair and Joining Solutions

Messer Eutectic Australia Pty Ltd
Phone (07) 3808 1608
Fax (07) 3290 4109
E-mail: [email protected]
Internet: http://www.eutectic.com.au