Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Timber Library V5.01: Member: 190mm X 45mm F7 KD Pine (Non-Laminated) Stress Grade - Table 2.4

    Uploaded by

    John Smith
    This document provides stress grade information for a 190mm x 45mm F7 KD pine timber member. Key details include: - The timber is F7 grade, KD pine with a density of 550kg/m3. - Bending and compression strengths are 18MPa and 13MPa respectively. - Additional metrics like modulus of elasticity, shear strength, and density adjustment factors are also specified. - Geometry details such as cross sectional area and second moments of area are provided for the member.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Timber Library V5.01: Member: 190mm X 45mm F7 KD Pine (Non-Laminated) Stress Grade - Table 2.4

    Uploaded by

    John Smith
    22 views4 pages
    This document provides stress grade information for a 190mm x 45mm F7 KD pine timber member. Key details include: - The timber is F7 grade, KD pine with a density of 550kg/m3. - Bending and compression strengths are 18MPa and 13MPa respectively. - Additional metrics like modulus of elasticity, shear strength, and density adjustment factors are also specified. - Geometry details such as cross sectional area and second moments of area are provided for the member.

    Original Description:

    Suitable for Australia only.

    Original Title

    Timber Library

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides stress grade information for a 190mm x 45mm F7 KD pine timber member. Key details include: - The timber is F7 grade, KD pine with a density of 550kg/m3. - Bending and compression strengths are 18MPa and 13MPa respectively. - Additional metrics like modulus of elasticity, shear strength, and density adjustment factors are also specified. - Geometry details such as cross sectional area and second moments of area are provided for the member.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    22 views4 pages

    Timber Library V5.01: Member: 190mm X 45mm F7 KD Pine (Non-Laminated) Stress Grade - Table 2.4

    Uploaded by

    John Smith
    This document provides stress grade information for a 190mm x 45mm F7 KD pine timber member. Key details include: - The timber is F7 grade, KD pine with a density of 550kg/m3. - Bending and compression strengths are 18MPa and 13MPa respectively. - Additional metrics like modulus of elasticity, shear strength, and density adjustment factors are also specified. - Geometry details such as cross sectional area and second moments of area are provided for the member.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    TIMBER LIBRARY V5.

    01 Demo User

    Member: 190mm x 45mm F7 KD Pine (Non-laminated)

    Stress grade - Table 2.4

    Grade = F7p Comment =


    Description = F7 KD Pine Density = 550 kg/m³
    Seasoned = S (S)easoned,(U)nseasoned Weight = 0.047 kN/m
    Type = S (H)ardwood,(S)oftwood
    Sub type = O (G)lulam,(M)GP,(L)vl,(O)ther Joint group = JD 4

    f'b = 18.0 MPa f'c = 13.0 MPa E= 7900 MPa


    f't = 8.6 MPa f's = 1.9 MPa G= 530 MPa

    ρb = 0.86 Table E1 ρc = 0.92 Table E3


    ρbu = 0.79 Table E1 - Load reversal with r=1 Axis = X (X),(Y)
    Normal axis
    j2 = 2 (δ Duration of load - Cl 2.4.1.2)
    Service class = N (1),(2),(3),(S)evere/Adverse,(N)ot applicable

    Laminated = Y (Y)es,(N)o
    No. Fixed Together = 1 g31 = 1.00 Beam ratio = 0.25
    No. Members = 1 g32 = 1.00 Column ratio = 0.25
    Total No. Members = 1 Refer Cl 2.4.5

    Geometry S.Wt = 0.05 kN/m

    Nominated Size = 190 mm (D) x 45 mm (W)


    Actual Size = 190 mm (dD) x 45 mm (dW)

    Design width laminated (dW_lam) = 45 mm (Non-laminated)


    Area (No. members*dW*dD) = 8550 mm²
    Ix = No. members*dW*dD³/12 = 25721250 mm⁴
    Zx = 2*Ix/dD = 270750 mm³
    Iy = No. members*dD*dW³/12 = 1442813 mm⁴ Nail laminated together to form single member
    Zy = No. members*2*(Iy/2)/dW = 32063 mm³

    Characteristic strength modifier (size factor)

    Apply Size = Y (Y)es,(N)o

    Size modifier Bending (mod.b) = 1.00 Table H2.1 Note 1 Base f'b = 18.0 MPa
    Size modifier Compression (mod.c) = 1.00 Table H2.1 Base f'c = 13.0 MPa
    Size modifier Tension (mod.t) = 0.96 Table H2.1 Note 2 Base f't = 8.9 MPa
    Size modifier Shear (mod.s) = 1.00 Table H2.1 Note 2 Base f's = 1.9 MPa

    * Modifiers are not applied for LVL timbers where the actual values are nominated for specific sizes
    Factors

    Partial seasoning factor (k4) = 1.00 Cl 2.4.2


    North of latitude 25°S = N (Y)es,(N)o
    Temperature factor (k6) = 1.00 Cl 2.4.3
    Notes:

    Retrieve grade:
    If you require a grade not listed in the quick selection
    method in the 'Select Member…' dialog, then
    use the 'Select Grade'... dialog to get other standard grades.
    Note, both the seasoning and hardwood checkboxes in the dialog
    must be set as required.

    (For grade, seasoned,type or subtype change)

    (For axis change)

    Service class:
    Service class defined in AS/NZS 1328.1 1998 Glued Laminated Structural Timber
    1 - Domestic houses, Commerical Offices
    2 - Open sheds, exposed beams under soffits, porches, laundries
    3 - Marine structures, Bridges
    S - Severe/Adverse requires specialist advice

    ρb & ρc values for Glulam and MGP:


    ρb & ρc values vary with the ratio of temporary load to total load.
    A conservative value has been used for a ratio of 0.
    Refer to the referenced tables for
    ρb & ρc values for Glulam and MGP.

    Double members:
    Double members are not considered laminated.
    Refer to AS1684.2 Cl 2.3 for requirements of
    vertical lamination.

    Apply Size:
    Determines if the size modifer required to calculate
    the modified capacity values. Hyspan values are size calculated,
    MGP use curve fitted size modifier to adjust the base f'b, and standard
    grades use the tabled modifiers

    k4 factor:
    Partial seasoning factor k4 taken as 1.
    Refer Cl 2.4.2.2 & 2.4.2.3 for more information.

    k6 factor:
    Refer Cl 2.4.3 if designing structures near coastal
    regions of Queensland north of 25°S and all other
    regions north of 16°S

    You might also like