FEATURES / BENEFITS Low Attenuation The low attenuation of CELLFLEX® coaxial cable results in highly efficient signal transferin your RF system. Complete Shielding The solid outer conductor of CELLFLEX® coaxial cable creates a continuous RFI/EMI shield that minimizes system interference. Low VSWR 1/2" CELLFLEX® Low-Loss Foam Special low VSWR versions of CELLFLEX® coaxial cables contribute to low system noise. Dielectric Coaxial Cable Outstanding Intermodulation Performance CELLFLEX® coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory. High Power Rating Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric materials, CELLFLEX® cable provides safe long term operating life at high transmit power levels. Wide Range of Application Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas, wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment interconnects.
Technical Features
APPLICATIONS OEM jumpers, Main feed transitions to equipment, GPS lines, Riser-rated In-Building, CPR Applications classified cable STRUCTURE Cable Type Foam-Dielectric, Corrugated Size 1/2" Jacket Option Black Inner Conductor mm (in) 4.8 (0.19) Copper-Clad Aluminum Wire Dielectric mm (in) 11.9 (0.47) Foam Polyethylene Outer Conductor mm (in) 13.8 (0.54) Corrugated Copper Jacket mm (in) 15.8 (0.62) Polyethylene, PE, Metalhydroxite Filling ELECTRICAL SPECIFICATIONS Impedance ȍ 50 +/- 1 Maximum Frequency GHz 8.8 Velocity % 88.0 Capacitance pF/m (pF/ft) 76 (23.2) Inductance µH/m (µH/ft) 0.19 (0.058) Peak Power Rating kW 38.0 RF Peak Voltage Volts 1950.0 Jacket Spark Volt RMS 8000.0 Inner Conductor dc Resistance ȍm ȍft) 1.57 (0.48) Outer Conductor dc Resistance ȍm ȍft) 2.7 (0.82) Return Loss (VSWR) Performance Standard Maximum Return Loss dB (VSWR) Contact RFS for your VSWR performance specification for your required frequency band. Phase Stabilized Phase stabilized and phase matched cables and assemblies are available upon request. Temperature & Power Standard MECHANICAL SPECIFICATIONS Cable Weight kg/m (lb/ft) 0.23 (0.16) Minimum Bending Radius, Single Bend mm (in) 70 (3) Minimum Bending Radius, Repeated Bends mm (in) 125 (5) Bending Moment Nm (lb*ft) 6.5 Tensile Strength N (lb) 1100 (247) Recommended / Maximum Clamp Spacing m (ft) 0.6 / 1 (2 / 3.25)
LCF12-50JFN REV: E REV DATE: 06.Feb.2018 www.rfsworld.com
All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2 PRODUCT DATASHEET LCF12-50JFN
tolerance +/- 5% max.; Mean power rating at 40°C (104°F) ambient temperature
External Document Links Notes
Phase stabilized versions available upon request.
LCF12-50JFN REV: E REV DATE: 06.Feb.2018 www.rfsworld.com
All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2
