Scribd Logo
Upload

Welcome to Scribd!

  • 102 views

    EB8870

    Uploaded by

    Miguel Rojas
    This document provides test specifications for an injection pump used in a Komatsu 6D125 engine for a bulldozer. It includes details on injection timing, adjusting delivery quantity at various pump speeds and rack travels, governor adjustment, pump operation with governor, and boost compensator adjustment if applicable. Delivery quantities are to be tested between 17.8-19 cc/cylinder at 950 rpm and 23.4-24.6 cc/cylinder at 550 rpm, within a maximum spread of 1.6 cc. Governor is adjustable to control pump speed between 300-950 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EB8870

    Uploaded by

    Miguel Rojas
    102 views2 pages
    This document provides test specifications for an injection pump used in a Komatsu 6D125 engine for a bulldozer. It includes details on injection timing, adjusting delivery quantity at various pump speeds and rack travels, governor adjustment, pump operation with governor, and boost compensator adjustment if applicable. Delivery quantities are to be tested between 17.8-19 cc/cylinder at 950 rpm and 23.4-24.6 cc/cylinder at 550 rpm, within a maximum spread of 1.6 cc. Governor is adjustable to control pump speed between 300-950 rpm.

    Original Description:

    DATO DE CALIBRE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides test specifications for an injection pump used in a Komatsu 6D125 engine for a bulldozer. It includes details on injection timing, adjusting delivery quantity at various pump speeds and rack travels, governor adjustment, pump operation with governor, and boost compensator adjustment if applicable. Delivery quantities are to be tested between 17.8-19 cc/cylinder at 950 rpm and 23.4-24.6 cc/cylinder at 550 rpm, within a maximum spread of 1.6 cc. Governor is adjustable to control pump speed between 300-950 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    102 views2 pages

    EB8870

    Uploaded by

    Miguel Rojas
    This document provides test specifications for an injection pump used in a Komatsu 6D125 engine for a bulldozer. It includes details on injection timing, adjusting delivery quantity at various pump speeds and rack travels, governor adjustment, pump operation with governor, and boost compensator adjustment if applicable. Delivery quantities are to be tested between 17.8-19 cc/cylinder at 950 rpm and 23.4-24.6 cc/cylinder at 550 rpm, within a maximum spread of 1.6 cc. Governor is adjustable to control pump speed between 300-950 rpm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INJECTION PUMP TEST SPECIFICATIONS 190000-8870

    INJECTION PUMP 190000-887# MANU-


    KOMATSU
    (ND-PE6NB110) FACTURER
    GOVERNOR 090800-909# (RSV) ENGINE
    6D125
    TYPE
    TIMER — VEHICLE
    BULLDOZER
    MODEL

    1.INJECTION TIMING

    1) Rotation : Counterclockwise 4) Pre-stroke : 4.65 – 4.75 mm


    viewed from drive side

    2) Injection Order : 1–5–3–6–2–4 5) Tappet Clearance : —

    3) Injection Interval : 60° ± 30' 6) Locked Timing : —


    Location

    2.ADJUSTMENT OF DELIVERY QUANTITY

    Test Conditions

    1) Nozzle : 093400 – 0540 4) Feed Pressure : 1.6 kgf/cm 2


    (DN12SD12A)

    2) Nozzle Opening : 175 kgf/cm 2 5) High Pressure Pipe : ø2 x ø6 x 600 mm


    Pressure

    3) Test Oil : SAE J967 6) Fuel Temperature : 40 – 45 °C (104 – 113 °F)

    Pump Speed (rpm) Rack Travel Number of Delivery Quantity Max. Spread in
    Remarks
    (mm) Strokes (cc/cyl.) Delivery (cc)
    950 10.6 200 17.8 – 19.0 1.6
    550 11.4 200 23.4 – 24.6 1.6
    300 About 9.3 (RW 1) 500 10.0 – 12.0 1.0 Check

    Overflow valve opening : 1.6 kgf/cm 2

    3.ADJUSTMENT OF GOVERNOR...Refer to the right side of this sheet.

    4.ADJUSTMENT OF PUMP WITH GOVERNOR OPERATION

    Lever Position Pump Speed Delivery Quantity


    Number of Strokes Remarks
    (deg) (rpm) (cc/cyl.)
    FULL 950 1000 90 – 94
    550 1000 117 – 123

    5. ADJUSTMENT OF TIMER N.A. : Not Applicable


    Pump Speed
    N.A.
    (rpm)

    Advance Angle
    N.A.
    (deg)
    190000-8870

    Control Speed Range : 300 – 950 rpm X = 1.5 – 2.5

    6.ADJUSTMENT OF BOOST COMPENSATOR (Full lever position)

    Pump Speed Boost Pressure (mmHg) RW Delivery Quantity (cc/200st)


    (rpm) (mm)
    N.A. N.A. N.A. N.A.

    NOTE:
    (1) Adjusting Lever Angle
    Setting position 40° to be at vertical position.
    (2) Adjusting Lever Operation
    Rack travel should be 0 – 4 mm when the adjusting lever is at stop position (VH = -25° – -15°) and pump speed 0 rpm.
    (3) Refer to 'ADJUSTMENT OF DELIVERY QUANTITY' fo RW 1.

    You might also like