Scribd
Upload
4K views1 page

Legrand 03740 Timer Instruction Manual PDF

This document provides instructions for wiring and programming a Legrand 03700 analog timer. It states to protect the timer with a fuse, wire it as shown in the diagram, and use a 2-pole or 3-pole contactor for loads over 16 amps or for 3-phase. It explains that to set the current time you rotate the dial until the time aligns with the triangle mark, and to set on and off times you move the segments horizontally. It also notes that manually rotating the dial while the override lever is in different positions shows how the on and off times will work.

Uploaded by

ptgrupos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

Legrand 03740 Timer Instruction Manual PDF

This document provides instructions for wiring and programming a Legrand 03700 analog timer. It states to protect the timer with a fuse, wire it as shown in the diagram, and use a 2-pole or 3-pole contactor for loads over 16 amps or for 3-phase. It explains that to set the current time you rotate the dial until the time aligns with the triangle mark, and to set on and off times you move the segments horizontally. It also notes that manually rotating the dial while the override lever is in different positions shows how the on and off times will work.

Uploaded by

ptgrupos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

http://waterheatertimer.org/How-to-wire-Legrand-03700-timer.

html with programming

Legrand 03740 vertical analog timer instruction manual


230V 50-60Hz Rated max 16 amps

Protect timer with fuse.


Wire timer as shown above.
Use 2-pole or 3-pole contactor for loads over 16 amp, and for 3-phase

Set current time by rotating dial


Move dial until current time aligns with triangle mark

Set ON-OFF times by moving segments horizontally

Manually rotate timer dial to watch how load turns ON-OFF


Move override lever to each position and rotate dial again.
This will show how to set ON-OFF times

More DIN rail timers


http://waterheatertimer.org/Hagar-timers-and-manuals.html
http://waterheatertimer.org/Intermatic-timers-and-manuals.html#talento-800
http://waterheatertimer.org/Tork-Digital-timers-and-manuals.html#DIN

Legrand 03700 digital timer

You might also like