Scribd
Upload
99 views8 pages

Graphic Presentations of The Adding Driver Method

1. The document provides steps to add a printer driver to a computer when the driver icon does not appear after installation. 2. It involves accessing the Devices and Printers control panel, clicking "Add Printer", selecting "Add a local printer", choosing the installation location using "Have Disk", selecting the correct driver files, and verifying the installation by printing a test page. 3. Fifteen steps are outlined to navigate the printer installation process when initial installation fails and add the driver successfully.

Uploaded by

PENUNJANG MEDIK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views8 pages

Graphic Presentations of The Adding Driver Method

1. The document provides steps to add a printer driver to a computer when the driver icon does not appear after installation. 2. It involves accessing the Devices and Printers control panel, clicking "Add Printer", selecting "Add a local printer", choosing the installation location using "Have Disk", selecting the correct driver files, and verifying the installation by printing a test page. 3. Fifteen steps are outlined to navigate the printer installation process when initial installation fails and add the driver successfully.

Uploaded by

PENUNJANG MEDIK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Adding methods of driver installation step

There would be some problems when some computers are installing the Drivers. For instance, the Driver’s
icon cannot be found in the tab of “Devices and Printers” after finishing the installation. In this case, the
printer could be added to the computer through the following methods.
1 、 Take Win7 32 bit system as an example. Enter into “Control Panel” of the computer and open the
Devices and Printers”, as shown in the following picture.

2、Click “Add Printer” button and then select “ Add a local printer”. Choose “Next Step”,See the picture
as below:
3、Default LPT port, Choose “Next Step”, see below:

4、Choose “Have Disk...” to install. See the picture below:


5、Choose “Browse...” as picture below:

6、Browse to the installation location. Default to the root directory of disk C. Choose “POS Printer Driver
V7.11”, Click “Open” button. See picture below:
7、Choose the folder of “32 bit” or “64 bit” according to the corresponding computer operating system, and
click the “Open” button again. See picture below:

8、Choose the “inf” file as shown in the following picture.


9、Click the “Ok” button as shown in the following picture.

10、Select corresponding Printer Driver, and click “Next” button. See picture below:
11 、Default driver name, Then click “Next”, See picture below:

12、Click “Finish”. See the picture below:


13 、 Printer added successfully. Corresponding icons of the driver is shown under the “Devices and
Printers” tab. Then, click the right mouse button on the icons of the printer driver—“Printers Properties”.
See the following picture.

14、 Open “Diver Interface” and choose the corresponding port. Then click “Apply”. See the following
picture.
15、Select “General”, and click “Print Test Page” button.

If Print Test Page printed by printer, it means driver has been installed successfully.

You might also like