Rele v23072 A 62

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Inhalt 24.03.

2004 15:43 Uhr Seite 100

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (open and sealed)

Powertrain Chassis Safety Security Body Driver Convenience


Systems Systems Information
Features
- 60% smaller volume than
power relay K
- High switching capacity
- Small footprint, minimal
space requirements

Typical applications
- Lamp control circuits
- Indicator control circuits
- Sunroof motors
- Window motors
- Immobilizers Car Industry
- Central doorlock etc.
- Also applicable for 42 V loads
(please ask our specialists)

Truck
Industry

Other
Industry
72A_3d01 / 72C_3d01

Design Conditions
Open or sealed; All parametric, environmental and
sealed version: sealing in accordance endurance tests are performed
with IEC 68; according to EIA Standard RS-407-A
immersion cleanable: protection class at standard test conditions unless
IP 67 to IEC 529 (EN 60 529) otherwise noted:
23 °C ambient temperature,
Weight 20-50% RH, 29.5 ± 1.0" Hg
Approx. 0.28 oz. (8 g) open version (998.9 ±33.9 hPa).
Approx. 0.32 oz. (9 g) sealed version Please also refer to the Application
Recommendations in this catalog
Nominal voltage for general precautions.
12 V or 24 V;
other nominal voltages on request

Terminals
PCB terminals, for assembling in
printed circuit boards
Terminals in grid 0.049 … 0.050"
(1.25 … 1.27 mm)

100
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Inhalt 24.03.2004 15:43 Uhr Seite 101

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (open)

Dimensional drawing
Open version

.591 ±.039
.512±.008 (15 ±1)
(13.0 ±0.2) .571 ±.016
.374 ±.008
(14.5 ±0.4)
(9.5 ±0.2) Ø .138
(3.5)

.689 ±.020 .008 … .055


(17.5 ±0.5) (0.2 … 1.4)

Terminals tinned
.157 ±.039
.138 ±.012 *) (4 ±1) .035 ±.006
(3.5 ±0.3) (0.9 ±0.15)
.240 ±.012
*) additional tin tops (6.1 ± 0.3)
max .039 inch (1 mm)
.264 ±.012
(6.7 ± 0.3) Tyco0595-Z

View of the terminals (Bottom view)


Ø .033 ±.002
(0.85 ±0.05)

.033 ±.002
(0.85 ±0.06)
4 x .033 ±.002
(0.85 ±0.06)

.030 ±.002 .022 ±.002


(0.75 ±0.06) (0.55 ±0.05) ECR2209-U

Mounting holes
View of the terminals (Bottom view)
Grid 0.049 … 0.050" (1.25 … 1.27 mm)

Ø .512 +.004
(1.3 +0.1) .049 … .050
(1.25 … 1.27)

.056 ±.010
.039 ±.018 (1.42 ±0.25)
(1 ±0.45)
.047 ±.016 Tyco0596-8
.091 max. (1.2 ±0.4)
(2.3 max.)

101
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Inhalt 24.03.2004 15:43 Uhr Seite 102

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (sealed)

Dimensional drawing
Sealed version

.579 ±.012 .665 ±.012


(14.7 ±0.3) (16.9 ±0.3)
Nipp-off-pin
The Nipp-off-pin may be
removed after soldering
.756 ±.012
.018 ±.016 and washing
(19.2 ±0.3)
(0.45 ±0.4) (for ventilation)

.012 ±.008 Terminals tinned


.118 ±.012 *) (0.3 ±0.2)
(3 ±0.3)
*) additional tin tops Tyco1112-3
max .039 inch (1 mm)

View of the terminals (Bottom view)


.075 ±.008
(1.9 ±0.2)
2 x Ø .033 ±.002
(0.85 ±0.05) Ø .079 ±.004
.181 ±.008 (Ø 2 ±0.1)
(4.6 ±0.2)

.354 ±.008
(9 ±0.2)
.033 ±.002
(0.85 ±0.06)
.033 ±.002
(0.85 ±0.06) .030 ±.002 4 x .022 ±.002
(0.75 ±0.06) (0.55 ±0.05) ECR2210-X

Mounting holes
View of the terminals (Bottom view)
Grid 1.25 … 1.27 mm
Ø .512 +.004
(1.3 +0.1) .049 … .050
(1.25 … 1.27)

.094 ±.024
(2.4 ±0.6)

ECR0598-P

.106 ±.016
(2.7 ±0.4)

102
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Inhalt 24.03.2004 15:43 Uhr Seite 103

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (open and sealed)

Contact data
Typical areas of application Resistive / inductive loads Indicator lamps
Contact configuration Make Changeover Double Make Double
contact/ contact/ make contact/ contact/ make contact/
Form A Form C Form U Form A Form U
Circuit symbol 3 5
(see also Pin assignment)

Rated voltage 12 V
Rated current at 85 °C 10 A 5 A/10 A 2x6A 5A 2x5A
Contact material AgNi0.15 AgSnO2
Max. switching voltage/power See load limit curve
Max. switching current1) NC/NO
On2) 60 A 12 A/60 A 2 x 40 A 60 A3) 120 A3)
Off 20 A 10 A/20 A 2 x 20 A 6A 12 A
Min. recommended load5) 1 A at 5 V
Voltage drop at 10 A (initial)
for NC/NO contacts Typ. 50 mV, 300 mV max. Typ. 2 x 50 mV, 300 mV max. Typ. 150 mV, 300 mV max.
Mechanical endurance (without load) > 107 operations
Electrical endurance > 2 x 105 operations > 1,5 x 106 > 1.5 x 106
(example of resistive load) 10 A, 13.5 V operations operations
up to 3 x 21 W up to 6 x 21 W
1) The values apply to a resistive load or inductive load with suitable spark suppression.
2) For a load current duration of maximum 3 s for a make/break ratio of 1:10.
3) Corresponds to the peak inrush current on initial actuation (cold filament).
4) At 50 % ON period
5) See chapter Diagnostics in our Application Recommendations on page 18.

Load limit curve

Tyco0626-Y
Tyco

Load limit curve 1 ^


= safe shutdown,
connected as form X, load on pin 5
and 7

Load limit curve 2 ^= safe shutdown,


Load
Load limit
limi no stationary arc / make contact
curve
curve 1 1
Load limit
Load limi Load limit curve 3 ^= arc extinguishes
curve 2
curve 2 during transit time (changeover contact)
Load limit
Load3 limi
curve
curve 3

Pin assignment (open and sealed)


1 make contact/ 1 double make contact/ 1 changeover contact/
1 form A 1 form U 1 form C

103
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Inhalt 24.03.2004 15:43 Uhr Seite 104

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (open and sealed)

Coil data
Available for nominal voltages 12, 24 V
(other coils on request)
Nominal power consumption of the unsuppressed coil at nominal voltage 1.1 W
Test voltage winding/contact 500 VACrms
Maximum ambient temperature range1) – 40 to + 85 °C
Operate time at nominal voltage 2) Typ. 3 ms
Release time at nominal voltage Typ. 1.5 ms
1)See also operating voltage range diagram
2)Measured at nominal voltage without coil suppression unit
N.B.
A low resistive suppression device in parallel to the relay coil increases the release time and reduces
the lifetime caused by increased erosion and/or higher risk of contact tack welding.

Operating voltage range

Does not take into account


the temperature rise due to
the contact current
E = pre-energization

Mechanical data
Enclosure Sealed relay is suitable for immersion cleaning of PCB assembly or conformal coating.
Sealed Please refer to the Application Recommendations in this catalog.

Operating conditions
Temperature range, storage -40 °C to 155 °C
Test Relevant standard Testing as per Dimension Comments
Climatic cycling with condensation1) EN ISO 6988 20 cycles Storage 8/16 h
Temperature cycling1) IEC 68-2-14 Na 20 cycles – 40/+ 85 ˚C (dwell time 1 h)
Damp heat1)
constant IEC 68-2-3 Ca 56 days Upper air temperature 55 °C
Corrosive gas1) IEC 68-2-42 10 days
IEC 68-2-43 – 10 days
Vibration resistance IEC 68-2-6 (sine pulse form) 10 … 200 Hz No change in the
acceleration, acc. to position 23 … 35 g switching state > 10 µs
Shock resistance IEC 68-2-27 (half-sine pulse form) 4 … 6 ms No change in the
acceleration 23 … 280 g switching state > 10 µs
Solderability IEC 68-2-20 Ta, Method 1 Aging 3 (4 h/155 °C)
Dewetting
Resistance to soldering heat IEC 68-2-20 Tb, Method 1A 10 s ± 1 s
with thermal screen
Sealing1) IEC 68-2-17 Qc, Method 2 1 min / 70 °C
Flammability UL94-HB
1) only sealed version

104
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Inhalt 24.03.2004 15:43 Uhr Seite 105

PCB relays Catalog 1308028


Single relays Issued 03-04

Mini power relay K (open and sealed)

Ordering information

Part numbers
(see table below for coil data) Contact Contact Enclosure Terminals
Relay part number Tyco order number arrangement material
V23072-A1061-A303 3-1393272-2 Form C AgNi0.15 Open Printed circuit
V23072-A1062-A303 5-1393272-2 Form C AgNi0.15 Open Printed circuit
V23072-A1061-A308 3-1393272-6 Form U, X AgNi0.15 Open Printed circuit
V23072-A1062-A308 5-1393272-3 Form U, X AgNi0.15 Open Printed circuit
V23072-C1061-A302 4-1393273-9 Form A AgNi0.15 Sealed Printed circuit
V23072-C1062-A302 7-1393273-6 Form A AgNi0.15 Sealed Printed circuit
V23072-C1061-A303 5-1393273-0 Form C AgNi0.15 Sealed Printed circuit
V23072-C1062-A303 7-1393273-8 Form C AgNi0.15 Sealed Printed circuit
V23072-C1061-A308 6-1393273-0 Form U, X AgNi0.15 Sealed Printed circuit
V23072-C1062-A308 8-1393273-2 Form U, X AgNi0.15 Sealed Printed circuit
V23072-C1061-A402 2-1416001-0 Form A AgSnO2 Sealed Printed circuit
V23072-C1061-A408 1-1416001-4 Form U, X AgSnO2 Sealed Printed circuit

Coil versions
Coil Rated coil Coil resistance Must Must Allowable overdrive 1)
data for voltage +/- 10% operate voltage release voltage voltage (V)
Mini K (V) (Ω) (V) (V) at 23 °C at 85 °C
Open and sealed V23072-**061-**** 12 130 6.9 1.2 19.2 14.9
V23072-**062-**** 24 520 14.1 2.4 38.4 29.8
1) Allowable overdrive is stated with no load applied and minimum coil resistance.

Standard delivery packs (orders in multiples of delivery pack)

Mini K open: 600 pieces


Mini K sealed: 504 pieces

105
All specifications subject to change. Consult Tyco Electronics for latest specifications.

You might also like