7th Sem Syllabus PDF

Flow charts and ‘c’ based computer programs for the design of transformer, dc machine, three phase induction
and synchronous machines.

Text Books:
1. K. Sawhney, “A Course in Electrical Machine Design” Dhanpat Rai & Sons.
2. K.G. Upadhyay,“ Conventional and Computer Aided Design of Electrical Machines” Galgotia Publications.
Reference Books:
3. M.G. Say, “The Performance and Design of AC Machines” Pitman & Sons.
4. A.E. Clayton and N.N. Hancock, “The Performance and Design of D.C.Machines” Pitman & Sons.
5. S.K. Sen, “Principle of Electrical Machine Design with Computer Programming” Oxford and IBM Publications.
EEE –703: POWER SYSTEM OPERATION AND CONTROL

L T P
3 1 0
UNIT-I
Introduction :
Structure of power systems,
Power system control center and real time computer control, SCADA system
Level decomposition in power system
Power system security
Various operational stages of power system
Power system voltage stability
UNIT-II
Economic Operation :
Concept and problems of unit commitment
Input-output characteristics of thermal and hydro-plants
System constraints
Optimal operation of thermal units without and with transmission losses, Penalty factor, incremental
transmission loss, transmission loss formula (without derivation)
Hydrothermal scheduling long and short terms
Concept of optimal power flow
UNIT-III
Load Frequency Control :
Concept of load frequency control,
Load frequency control of single area system:
Turbine speed governing system and modeling, block diagram representation of single area system, steady
state analysis, dynamic response, control area concept, P-I control, load frequency control and economic
dispatch control.
Load frequency control of two area system:
Tie line power modeling, block diagram representation of two area system, static and dynamic response
UNIT-IV
Automatic Voltage Control :
Schematic diagram and block diagram representation, different types of Excitation systems & their
controllers.
Voltage and Reactive Power control :
Concept of voltage control, methods of voltage control-control by tap changing transformer.
Shunt Compensation, series compensation, phase angle compensation
UNIT-V
State Estimation:
Detection and identification, Linear and non-linear models.
Flexible AC Transmission Systems:
Concept and objectives
FACTs controllers: Structures & Characteristics of following FACTs Controllers.
TCR,FC-TCR, TSC, SVC, STATCOM, TSSC, TCSC, SSSC, TC-PAR, UPFC
Text Books:
1. D.P. Kothari & I.J. Nagrath, “Modern Power System Analysis” Tata Mc Graw Hill, 3 rd Edition.
2. P.S.R. Murty, “Operation and control in Power Systems” B.S. Publications.
3. N. G. Hingorani & L. Gyugyi, “ Understanding FACTs” Concepts and Technology of Flexible AC Transmission
Systems”
4. J. Wood & B.F. Wollenburg, “ Power Generation, Operation and Control “ John Wiley & Sons.
Reference Books:
5. O.I. Elgerd, “Electric Energy System Theory” Tata McGraw Hill.
6. P. Kundur, “ Power System Stability and Control Mc Graw Hill.
7. M.H. Rashid, “Power Electronics: Circuits, devices and Applications” Prentice Hall of India,3 rd Edition.
8. T. K. Nagsarkar & M.S.Sukhiza,’ Power System Analysis’ Oxford University Press.
EOE I : Non Conventional Energy Resources:

L T P
3 1 0
Power Crisis, future energy demand, role of Private sectors in energy management,
MHD generation: Working principle, open and closed cycles, MHD systems, advantages,
parameters governing power output.
Solar power plant: Conversion of solar heat to electricity, Solar energy collectors, Photovoltaic
cell, power generation, future prospects of solar energy use.
Wind Energy: Windmills, power output with combined operation of wind turbine generation and
isolated generating system, technical choices& economic size.
Geothermal Energy: Earth energy, heat extraction, vapor turbine cycle, difficulties &
disadvantages,
Tidal energy: Tidal phenomenon, tidal barrage, tidal power Schemes.
Ocean Thermal Energy: Introduction, energy conversion, problems.
EDE-III: NEURAL NETWORKS AND FUZZY SYSTEM

LTP
31 0
Unit-I
Neural Networks-1(Introduction & Architecture)
Neuron, Nerve structure and synapse, Artificial Neuron and its model, activation functions,
Neural network architecture: single layer and multilayer feed forward networks, recurrent networks.Various
learning techniques; perception and convergence rule,
Auto-associative and hetro-associative memory
Text Books:
1. B.R. Gupta,“Generation of Electrical Energy”, S. Chand Publication.
2. Soni, Gupta & Bhatnagar, “A text book on Power System Engg.”, Dhanpat Rai & Co.
3. P.S.R. Murthy, “Operation and control of Power System” BS Publications, Hyderabad.
Reference Books:
4. W. D. Stevenson, “Elements of Power System Analysis”, McGraw Hill.
5. S. L. Uppal, “Electrical Power”, Khanna Publishers.
EDE – I : ADVANCED CONTROL SYSTEM
L T P
3 1 0
Unit-I
State Space Analysis of Continuous System:
Review of state variable representation of continuous system, conversion of state variable models to transfer
function and vice-versa, solution of state equations and state transition matrix, controllability and obsrvability,
design of state observer and controller
Unit-II
Analysis of Discrete System:
Discrete system and discrete time signals, state variable model and transfer function model of discrete system,
conversion of state variable model to transfer function model and vice-versa, modeling of sample-hold circuit,
solution of state difference equations, steady state accuracy, stability on the z-plane and Jury stability
criterion, bilinear transformation, Routh-Hurwitz criterion on rth planes
Unit-III
Stability:
Lyapunov’s stability theorems for continuous and discrete systems, methods for generating Lyapunov function
for continuous and discrete system, Popov’s criterion.
Non linear System:
Types of non linearities, phenomena related to non - linear systems.
Analysis of non linear systems-Linearization method, second order non-linear system on the phase plane,
types of phase portraits, singular points, system analysis by phase-plane method, describing function and its
application to system analysis.
Unit-IV
Optimal Control:
Introduction, formation of optimal control problem, calculus of variations minimization of functions,
constrained optimization.Pontryagin’s Minimum Maximum Principle, Linear Quadratic Problem-Hamilton
Jacobi equation, Riccati equation and its solution.
Unit-V
Adaptive Control:
Introduction, modal reference adaptive control systems, controller structure, self tuning regulators.
Introduction to neural network, fuzzy logic and genetic algorithms
Text Books:
1. M.Gopal, “Digital Control and State variable Methods”, Tata Mc Graw Hill
2. Ajit K.Madal, “Introduction to Control Engineering: Modelling, Analysis and Design”
3. New Age International.
4. D.Landau, “Adaptive Control”, Marcel Dekker Inc.
5. S.Rajasekaran & G.A.Vjayalakshmi Pai, “Neural Networks,Fuzzy Logic and Genetic
6. Alogorithms: Synthesis and Applications” Prentice Hall of India.
Reference Book:
7. Donald E. Kiv, “Optimal Control Theory: An Introduction” Prentice Hall
8. B.C. Kuo, “Digital Control Systems” Sounders College Publishing
9. C.H.Houpis and G.B.Lamont,“Digital Control Systems:Theory,Hardware,Software”Mc Graw Hill.

7th Sem Syllabus PDF

Uploaded by

Copyright:

Available Formats

7th Sem Syllabus PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

7th Sem Syllabus PDF

Uploaded by

Copyright:

Available Formats

Flow charts and ‘c’ based computer programs for the design of transformer, dc machine, three phase induction

and synchronous machines.

EEE –703: POWER SYSTEM OPERATION AND CONTROL

EOE I : Non Conventional Energy Resources:

Tidal energy: Tidal phenomenon, tidal barrage, tidal power Schemes.

Ocean Thermal Energy: Introduction, energy conversion, problems.

EDE-III: NEURAL NETWORKS AND FUZZY SYSTEM

You might also like