Scribd
Upload
352 views5 pages

Analysis Log Etabs

The document is a log file from an ETABS structural analysis software. It summarizes: 1) The model contains 20037 joints, 18549 frame elements, and 18620 shell elements. 2) A nonlinear static analysis was performed including P-Delta effects with 2 stiffness formations. 3) A modal, response spectrum, and several linear static analyses were then performed using the final stiffness from the nonlinear case.

Uploaded by

sahmedu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
352 views5 pages

Analysis Log Etabs

The document is a log file from an ETABS structural analysis software. It summarizes: 1) The model contains 20037 joints, 18549 frame elements, and 18620 shell elements. 2) A nonlinear static analysis was performed including P-Delta effects with 2 stiffness formations. 3) A modal, response spectrum, and several linear static analyses were then performed using the final stiffness from the nonlinear case.

Uploaded by

sahmedu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

ETABS 2016 Ultimate 64-bit 16.2.

0 Build 1645 (Analysis Build 9562/64)


File: C:\Users\LEAD\Desktop\Desktop Dump - To be deleted\Shaker.LOG

B E G I N A N A L Y S I S 2018/08/01 20:51:10

RUNNING ANALYSIS AS A SEPARATE PROCESS


USING THE MULTI-THREADED SOLVER (PROVIDES NO INSTABILITY INFORMATION)

NUMBER OF JOINTS = 20037


WITH RESTRAINTS = 327
WITH MASS = 19842
NUMBER OF FRAME/CABLE/TENDON ELEMENTS = 18549
NUMBER OF SHELL ELEMENTS = 18620
NUMBER OF CONSTRAINTS/WELDS = 332
NUMBER OF LOAD PATTERNS = 23
NUMBER OF ACCELERATION LOADS = 9
NUMBER OF LOAD CASES = 27

ADDRESSABLE PHYSICAL MEMORY (RAM) = 7.898 GB

PARALLELIZATION OF ANALYSIS OPERATIONS:


(Env. variable SAPFIRE_NUM_THREADS = 0)
NUMBER OF THREADS: STATE (AUTOMATIC) = 4
NUMBER OF THREADS: STIFFNESS (AUTOMATIC) = 4
NUMBER OF THREADS: EVENT (AUTOMATIC) = 4
NUMBER OF THREADS: MOVE (AUTOMATIC) = 4
NUMBER OF THREADS: RESPONSE (AUTOMATIC) = 4
NUMBER OF THREADS: SOLVE (AUTOMATIC) = 4
NUMBER OF THREADS: FORM (AUTOMATIC) = 4

N O N L I N E A R S T A T I C A N A L Y S I S 20:51:10

CASE: ~P-DELTA

STARTING FROM ZERO (UNSTRESSED) INITIAL CONDITIONS

LOAD CONTROL TYPE = FORCE


TYPE OF GEOMETRIC NONLINEARITY = P-DELTA
INCLUDE ELASTIC MATERIAL NONLINEARITY = NO
INCLUDE INELASTIC MATERIAL NONLINEARITY = NO
USE EVENT STEPPING = YES
USE ITERATION = YES
USE LINE SEARCH = NO
EVENT LUMPING TOLERANCE = 0.010000
FORCE CONVERGENCE TOLERANCE (RELATIVE) = 0.000100

E L E M E N T F O R M A T I O N 20:51:10

NUMBER OF COUPLED CONSTRAINT EQUATIONS = 2328


REDUCTION OF CONSTRAINTS AND RESTRAINTS:
NUMBER OF
CONSTRAINT MASTER DOF BEFORE REDUCTION = 1965
COUPLED CONSTRAINT/RESTRAINT MASTER DOF = 582
CONSTRAINT MASTER DOF AFTER REDUCTION = 1383

Negative iterations are Constant-Stiffness


Positive iterations are Newton-Raphson

Saved Null Total Iteration Relative Curr Step Curr Sum Max Sum
Steps Steps Steps this Step Unbalance Size of Steps of Steps
( 1 50 200 -10/40 1.000000 1.000000 1.000000 1.000000)

0 0 1 -1 60.658885 1.000000 .000000 .000000


0 0 1 Conv -2 0.441341 1.000000 1.000000 1.000000

----------------------------------------
BASIC STABILITY CHECK FOR FORCE-CONTROLLED NONLINEAR STATIC LOAD CASES:
NUMBER OF NEGATIVE STIFFNESS EIGENVALUES SHOULD BE ZERO FOR STABILITY.
(NOTE: FURTHER CHECKS SHOULD BE CONSIDERED AS DEEMED NECESSARY)

NUMBER FOUND AT FINAL CONVERGED STATE = 0, OK.


----------------------------------------

NUMBER OF STIFFNESS FORMATIONS/SOLUTIONS = 2

TIME FOR INITIALIZING ANALYSIS = 1.55


TIME FOR CONTROLLING ANALYSIS = 2.06
TIME FOR UPDATING LOADS AND STATE = 2.46
TIME FOR FORMING STIFFNESS MATRIX = 0.66
TIME FOR SOLVING STIFFNESS MATRIX = 2.14
TIME FOR CALCULATING DISPLACEMENTS = 0.06
TIME FOR DETERMINING EVENTS = 0.11
TIME FOR SAVING RESULTS = 0.20
----------
TOTAL TIME FOR THIS ANALYSIS = 9.24

E L E M E N T F O R M A T I O N 20:51:20

NUMBER OF COUPLED CONSTRAINT EQUATIONS = 2328


REDUCTION OF CONSTRAINTS AND RESTRAINTS:
NUMBER OF
CONSTRAINT MASTER DOF BEFORE REDUCTION = 1965
COUPLED CONSTRAINT/RESTRAINT MASTER DOF = 582
CONSTRAINT MASTER DOF AFTER REDUCTION = 1383

L I N E A R E Q U A T I O N S O L U T I O N 20:51:21

FORMING STIFFNESS AT THE END OF CASE: ~P-DELTA

TOTAL NUMBER OF EQUILIBRIUM EQUATIONS = 116856


NUMBER OF NON-ZERO STIFFNESS TERMS = 2991492

---------------------------------
BASIC STABILITY CHECK FOR LINEAR LOAD CASES:
NUMBER OF NEGATIVE STIFFNESS EIGENVALUES SHOULD BE ZERO FOR STABILITY.
(NOTE: FURTHER CHECKS SHOULD BE CONSIDERED AS DEEMED NECESSARY,
SUCH AS REVIEWING EIGEN MODES FOR MECHANISMS AND RIGID-BODY MOTION)

NUMBER OF NEGATIVE EIGENVALUES = 0, OK.


---------------------------------

L I N E A R S T A T I C C A S E S 20:51:23

USING STIFFNESS AT THE END OF CASE: ~P-DELTA

TOTAL NUMBER OF CASES TO SOLVE = 23


NUMBER OF CASES TO SOLVE PER BLOCK = 23

LINEAR STATIC CASES TO BE SOLVED:

CASE: OW
CASE: SID
CASE: LLR
CASE: LLM
CASE: LLP
CASE: TEMP
CASE: EQX
CASE: EQMX
CASE: EQY
CASE: EQMY
CASE: W
CASE: W-2
CASE: W-3
CASE: W-4
CASE: W-5
CASE: W-6
CASE: W-7
CASE: W-8
CASE: W-9
CASE: W-10
CASE: W-11
CASE: W-12
CASE: ~LLRF

R I T Z M O D A L A N A L Y S I S 20:51:28

CASE: MODAL

USING STIFFNESS AT THE END OF CASE: ~P-DELTA

NUMBER OF STIFFNESS DEGREES OF FREEDOM = 116856


NUMBER OF MASS DEGREES OF FREEDOM = 38806
MAXIMUM NUMBER OF RITZ MODES SOUGHT = 12
MINIMUM NUMBER OF RITZ MODES SOUGHT = 1
NUMBER OF STARTING VECTORS = 2
VECTOR BLOCK SIZE = 6
FREQUENCY SHIFT (CENTER) (CYC/TIME) = .000000

NUMBER OF RITZ MODES FOUND = 12


NUMBER OF GENERATION CYCLES PERFORMED = 6

R E S P O N S E - S P E C T R U M A N A L Y S I S 20:51:31
CASE: SPEC1

TYPE OF EXCITATION = STANDARD GROUND ACCELERATION

USING MODES FROM CASE: MODAL


NUMBER OF DYNAMIC MODES TO BE USED = 12

R E S P O N S E - S P E C T R U M A N A L Y S I S 20:51:31

CASE: SPEC2

TYPE OF EXCITATION = STANDARD GROUND ACCELERATION

USING MODES FROM CASE: MODAL


NUMBER OF DYNAMIC MODES TO BE USED = 12

A N A L Y S I S C O M P L E T E 2018/08/01 20:51:31

ETABS 2016 Ultimate 64-bit 16.2.0 Build 1645 (Analysis Build 9562/64)
File: C:\Users\LEAD\Desktop\Desktop Dump - To be deleted\Shaker.LOG

B E G I N A N A L Y S I S 2018/08/01 20:51:41

RUNNING ANALYSIS AS A SEPARATE PROCESS


USING THE MULTI-THREADED SOLVER (PROVIDES NO INSTABILITY INFORMATION)

NUMBER OF JOINTS = 20037


WITH RESTRAINTS = 327
WITH MASS = 19842
NUMBER OF FRAME/CABLE/TENDON ELEMENTS = 18549
NUMBER OF SHELL ELEMENTS = 18620
NUMBER OF CONSTRAINTS/WELDS = 332
NUMBER OF LOAD PATTERNS = 23
NUMBER OF ACCELERATION LOADS = 9
NUMBER OF LOAD CASES = 27

ADDRESSABLE PHYSICAL MEMORY (RAM) = 7.898 GB

PARALLELIZATION OF ANALYSIS OPERATIONS:


(Env. variable SAPFIRE_NUM_THREADS = 0)
NUMBER OF THREADS: STATE (AUTOMATIC) = 4
NUMBER OF THREADS: STIFFNESS (AUTOMATIC) = 4
NUMBER OF THREADS: EVENT (AUTOMATIC) = 4
NUMBER OF THREADS: MOVE (AUTOMATIC) = 4
NUMBER OF THREADS: RESPONSE (AUTOMATIC) = 4
NUMBER OF THREADS: SOLVE (AUTOMATIC) = 4
NUMBER OF THREADS: FORM (AUTOMATIC) = 4

E L E M E N T F O R M A T I O N 20:51:42
NUMBER OF COUPLED CONSTRAINT EQUATIONS = 2328
REDUCTION OF CONSTRAINTS AND RESTRAINTS:
NUMBER OF
CONSTRAINT MASTER DOF BEFORE REDUCTION = 1965
COUPLED CONSTRAINT/RESTRAINT MASTER DOF = 582
CONSTRAINT MASTER DOF AFTER REDUCTION = 1383

L I N E A R E Q U A T I O N S O L U T I O N 20:51:44

FORMING STIFFNESS AT THE END OF CASE: ~P-DELTA

TOTAL NUMBER OF EQUILIBRIUM EQUATIONS = 116856


NUMBER OF NON-ZERO STIFFNESS TERMS = 2991492

---------------------------------
BASIC STABILITY CHECK FOR LINEAR LOAD CASES:
NUMBER OF NEGATIVE STIFFNESS EIGENVALUES SHOULD BE ZERO FOR STABILITY.
(NOTE: FURTHER CHECKS SHOULD BE CONSIDERED AS DEEMED NECESSARY,
SUCH AS REVIEWING EIGEN MODES FOR MECHANISMS AND RIGID-BODY MOTION)

NUMBER OF NEGATIVE EIGENVALUES = 0, OK.


---------------------------------

L I N E A R S T A T I C C A S E S 20:51:46

USING STIFFNESS AT THE END OF CASE: ~P-DELTA

TOTAL NUMBER OF CASES TO SOLVE = 4


NUMBER OF CASES TO SOLVE PER BLOCK = 4

LINEAR STATIC CASES TO BE SOLVED:

CASE: EQX
CASE: EQMX
CASE: EQY
CASE: EQMY

A N A L Y S I S C O M P L E T E 2018/08/01 20:51:47

You might also like