Oildyne 108/118 and 165/175 Series

Hydraulic Power Units

Pressures to 241 bar (3500 psi)
Flow to 5.3 lpm (1.4 gpm)
 WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by
users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product
catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the
final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and
its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the “Offer of Sale”.

© Copyright 2016 Parker Hannifin Corporation, All Rights Reserved

Parker Hannifin
HPS Division
New Hope, MN 55428  USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Features Hydraulic Power Units

Typical applications
Positioning
• Hydraulic door operators
• Conveyor belt tensioners
• Medical chairs, beds, and equipment

Recreational Vehicles
• Leveling
• Slideouts
• Tent Trailers

Clamping
• Tool fixtures and jigs
• Hydraulic brakes
• Crimping tools
• Arbor presses
• Truck restraints

Cycling
• Garbage compactors
• Valve operators
• Press controls
• Packing equipment
• Indexing tables

Lifting
• Handicap lifts
• Scissor lift tables
• Pallet movers
108 and 165 Series • Cab tilts
• Mobile sign lifts
Self-contained • Boat lifts
Hydraulic Power Units
The Oildyne Division’s compact 108/165 Series Bi-directional, reversible units operate double-
power units let you put the power where you acting cylinders and two-way motors.
need it. They’re completely self-contained with New are the 118 and 175 Series codes. Instead of
an AC or DC motor, gear pump, reservoir, internal the standard threaded ports, these new versions
valving, load hold checks and relief valves. provide a four-bolt, flat manifoldable surface
The 108/165 Series models are designed for to accept the solenoid manifold circuit or your
intermittent service and come in six standard custom manifold.
pump sizes which produce flows of .16, .31. We’d like to work with you on your hydraulic
.41, .52, .82 and 1.06 cc/rev (.0098, .0187, applications. Our people know small hydraulics.
.0246, .0321, .050 and .065 cubic inches/rev). We know how to design them, how to make them
Locking check valves are available in all models. and how to apply them. Therefore, we can offer
Performance will vary with the type of fluid used. you a practical, economical solution to your fluid
Several hydraulic circuits are available. power problems.
108/165 Series units are available with single- or Oildyne has pioneered top quality, compact
bi-directional rotation. Single direction units are hydraulic components since 1955. We can
commonly used to charge accumulators, power provide standard products or tailor high pressure,
one-direction hydraulic motors and cylinders, space saving solutions to your specific needs.
provide pilot flow to servo valves, pressurize lube
Note: Parker Oildyne products are not to be
systems and supply multifunction circuits using
applied in aviation applications.
external valving.

6 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
 Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Technical Specifications Hydraulic Power Units

Standard Product Ordering Code

PRODUCT TYPE DN RV SETTING

108 108 Power Unit (Right Hand Port)
118 118 Power Unit In multiples of 100 psi
165 165 Power Unit Examples
175 175 Power Unit 04 = 400 psi
MOTOR CODE – 108/118 12 = 1200 psi
AE 12 VDC Perm. Mag. 29 = 2900 psi
AM 12 VDC Ser. Wnd. If Single Direction circuit
BE 24 VDC Perm. Mag. use 00
BI 24 VDC Ser. Wnd.
HA 115 VAC, 1 phase UP RV SETTING
HD 230 VAC, 1 phase (Left Hand Port)
IA 36 VDC Perm. Mag. In multiples of 100 psi
IC 36 VDC Ser. Wnd. Examples
MOTOR CODE – 165/175 04 = 400 psi
AY 12 VDC Perm. Mag. 1 HP 12 = 1200 psi
BY 24 VDC Perm. Mag. 1 HP 29 = 2900 psi
PUMP TYPE MOUNTING
S Standard V Vertical (motor up)
C Cold Temp H Horizontal (ports up)
PUMP SIZE 108/118 PORTS
10 .16 cc/rev (.010 in3/rev) 1 7/16-20 (SAE -4) (108 & 165 only)
19 .31 cc/rev (.019 in3/rev) 2 7/16-24 (Inv. Flare) (108 only)
25 .41 cc/rev (.025 in3/rev) 3 1/8 in Pipe (NPSF) (108 only)
32 .52 cc/rev (.032 in3/rev) 4 1/8 in Pipe (BSPP) (108 & 165 only)
Note: for 118 or 175, use -1 for SAE mounting;
PUMP SIZE 165/175
use -4 for Metric mounting
32 .52 cc/rev (.032 in3/rev)
50 .82 cc/rev (.050 in3/rev) CIRCUIT TYPE
65 1.06 cc/rev (.065 in3/rev) NN Single direction
WW Single dir. with check
RESERVOIRS
RR Reversible
Vertical Usable CODE Horizontal Usable LL Reversible locking
340 cc 21 in3 A 410 cc 25 in3 RB Reversible with Back Press.
600 cc 37 in3 B 640 cc 37 in3
LB Rev. lock. with Back Press.
410 cc 25 in3 C N/A Each Solenoid Valve option below includes the WW circuit:
410 cc 25 in3 D N/A
Use 118 or 175 when coding solenoid valve circuit
1500 cc 95 in3 F 1500 cc 92 in3
Coils have dual leads: 18 ga, 457 mm (18”)
750 cc 46 in 3
G 910 cc 55 in3
S1 12 VDC, Normally Closed
1700 cc 104 in3 H 2400 cc 150 in3
S2 24 VDC, Normally Closed
3700 cc 226 in3 I 4200 cc 254 in3
S3 120 VAC, Normally Closed (108/118 only)
5300 cc 323 in3 J 5600 cc 347 in3
S4 240 VAC, Normally Closed (108/118 only)
950 cc 58 in3 P 940 cc 58 in3
S5 12 VDC, Normally Open
1900 cc 118 in3 Q 1500 cc 95 in3
S6 24 VDC, Normally Open
4500 cc 277 in3 R 3000 cc 185 in3
S7 120 VAC, Normally Open (108/118 only)
3200 cc 201 in3 S 2300 cc 141 in3
S8 240 VAC, Normally Open (108/118 only)
NOTES: C and D reservoirs are Vertical Mount only
A, B and F reservoirs are available only for 108/118 Series
Reservoir A with .32 pump cannot be horizontal mount

ORDERING CODE INSTRUCTIONS

Select the model code needed based on catalog information. All boxes above must be filled in before Oildyne can process the
order. If the power unit is a single direction unit use '00' for the DN (Right Hand) relief valve box. For circuits LL and LB, the two
relief valve settings should be within a 5:1 ratio.
RELIEF VALVE TOLERANCES
ORDERING CODE INSTRUCTIONS
Select the model code needed based on catalog information. All boxes above must be filled in before Oildyne can process the
order. If the power unit is a single direction unit use '00' for the DN (Right Hand) relief valve box. For circuits LL and LB, the two
relief valve settings should be within a 5:1 ratio.
RELIEF VALVE TOLERANCES
8+
0+
200
Hydraulic Fluid Temperature Range
Acceptable fluids for 108/118/165/175 Series Power Units: Temperature Ranges for 108/118/165/175 Series:
• Standard Automatic Transmission Fluid (ATF)
ALL Operating:
DATA SUBJECT TO CHANGE
WITHOUT -7 to +60°C (+20 to +140°F)
NOTICE
• Most mineral based hydraulic
FOR POWER fluids
UNIT CONFIGURATIONS OTHER THAN Storage:
THOSE SHOWN PLEASE-7 to +60°C (+20OILDYNE.
CONSULT to +140°F)
Viscosity range: 32-64 cSt (150-300 SSU) at 38°C (100°F). Please contact Parker Oildyne for usage outside of this range.

ALL DATA SUBJECT TO CHANGE WITHOUT NOTICE

FOR POWER UNIT CONFIGURATIONS OTHER THAN THOSE SHOWN PLEASE CONSULT OILDYNE.

7 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Performance Data Hydraulic Power Units

Performance Data
108/118 Series: Permanent Magnet Motors - AE/BE
Note: IA motor (36 VDC) flow will be equivalent to the AE/BE curves:
current draw will be about 1/3 of the AE motor values

BASIC MOTOR CONNECTIONS, BY MOTOR CODE

108/118 Series PM Motors: AE only (12 VDC)
1) For Single Direction only, and Reversible with UP port pressure:
BLUE + 12 VDC
GREEN Ground
2) Reversible with DN port pressure:
BLUE Ground
GREEN + 12 VDC)
108/118 Series PM Motors: BE/IA only (24/36 VDC)
1) For Single Direction only, and Reversible with UP port pressure:
BLACK + 24 or 36 VDC
ORANGE Ground
2) Reversible with DN port pressure
BLACK Ground
ORANGE + 24 or 36 VDC
For electrical controls suggestions, see page 36

DC Motor Duty Cycle Characteristics

108/118 Perm. Magnet Motors – AE/BE (for intermittent duty cycles only)
Current Draw vs On Time General Guidelines at 21°C (70°F)

Performance data for reference only. Based on ATF at 21°C (70°F)

8 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
 Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Performance Data Hydraulic Power Units

Performance Data
108/118 Series: Series Wound Motors - AM/BI
Note: IC motor (36 VDC) flow will be equivalent to the AM/BI curves:
current draw will be about 1/3 of the AM motor values
.100 Pump
1.6 with AM / BI Motor 60
(100)
Output Flow - lpm (cipm)

Flow

Current - Amps
1.3 48
(80)
Current
@ 12 VDC
.98 36
(60)

.66 24
(40)

.33 12
(20) Current
@ 24 VDC

0 0
0 34 69 103 138 172 207 241
(500) (1000) (1500) (2000) (2500) (3000) (3500)
Pressure - bar (psi)

108/118 Series SW Motors: AM/BI/IC only (12/24/36 VDC)

1) For Single Direction only, and Reversible with UP port pressure:
BLUE + VDC 12 (AM); 24 (BI); 36 (IC)
GREEN unused
BLACK Ground
2) Reversible with DN port pressure:
BLUE unused
GREEN + VDC 12 (AM); 24 (BI); 36 (IC)
BLACK Ground
For electrical controls suggestions, see page 36

DC Motor Duty Cycle Characteristics

Performance data for reference only. Based on ATF at 21°C (70°F)

9 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Performance Data Hydraulic Power Units

Performance Data
108/118 Series: AC Motors - HA/HD

NOTES:
• S2 = 5 Maximum recommended ON time for the HA/HD motors
is 5 minutes, after which the motors must be OFF until cooled to
ambient temperature
• 50 Hz performance is about 83% of curves shown

108/118 Series HA Motors (115 VAC) 108/118 Series HD Motors (230 VAC)
1) For Single Direction only, and Reversible with UP port 1) For Single Direction only, and Reversible with UP port
pressure: pressure:

For electrical controls suggestions, see page 36.

To reverse rotation, interchange the Black and Red wires.
Performance data for reference only. Based on ATF at 21°C (70°F)

10 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Performance Data Hydraulic Power Units

Performance Data
165/175 Series: Permanent Magnet Motors - AY
Note: BY motor (24 VDC) flow will be equivalent to the AY curves;
current draw will be about 1/2 of the AY motor values.
5.74
350 175
(350)

650 Pump
4.92 (.065 cipr)
300
(300) 150

4.10
(250)
250 125
Output Flow -lpm (cipm)

3.28

Current - Amps
200
(200) 100
500 Pump
(.050 cipr)
2.46
150
(150) 75

1.64
100
(100) 50
327 Pump
(.032 cipr)
0.82
50
(50) 25

0 0
34 69 103 138 172 207 241
0 500 1000 1500 2000 2500 3000
(500) (1000) (1500) (2000) (2500) (3000) (3500)
Pressure - bar (psi)

AY and BY motor electrical connections. For electrical controls suggestions, see page 36
165/175 Series AY Motor 165/175 Series BY Motor
1) For Single Direction only, and Reversible with UP port 1) For Single Direction only, and Reversible with UP port
pressure: pressure:
Terminal 1 Ground Terminal 1 Ground
Terminal 2 + 12 VDC Terminal 2 + 24 VDC
2) Reversible with DN port pressure: 2) Reversible with DN port pressure:
Terminal 1 + 12 VDC Terminal 1 + 24 VDC
Terminal 2 Ground Terminal 2 Ground

DC Motor Duty Cycle Characteristics

165/175 Series Motors AY/BY (for intermittent duty cycles only)
Current Draw vs On Time General Guidelines at 21°C (70°F)

Performance data for reference only. Based on ATF at 21°C (70°F)

11 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Circuits Hydraulic Power Units

Single Direction Circuits

UP DN UP DN

TRV

RV RV

108/165 Series Single Direction NN Circuit 108/165 Series Single Direction WW Circuit

UP

TRV
Thermal Relief
N.C. Valves—Why?
The thermal relief valve’s (TRV) purpose is to allow
a bleed off of built up pressure due to thermal
expansion of the fluid or to act as a (very limited)
RV
shock load protection, should a cylinder in the system
get bumped.

The thermal relief valve is included in circuits using

a pilot operated check valve. The single direction
units get one; the reversing units get two. It is located
between the check valve and the 108 Series pump
outlet port. It is a fixed relief valve with a pressure
setting approximately 100-140 bar (1500-2000 psi)
118/175118 and 175
Series Series
Single S1 - S4with
Direction Circuit (N.C.
2-way N.valve)
C. valve above the system relief valve pressure.
S5-S8 Circuits use N.O. Valves

12 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Circuits Hydraulic Power Units

Reversible Circuits

108/118 and 165/175 Series RR Circuit

(Reversible)
108/118 and 165/175 Series LL Circuit
(Reversible Locking)
Note: Back Pressure circuits (RB and LB) require
the UP ports to be connected to the extend ports
of cylinders.

108/118 and 165/175 Series RB Circuit

(Reversible with Back Pressure)
108/118 and 165/175 Series LB Circuit
(Reversible Locking with Back Pressure)
Back Pressure Circuits—
Why?
The basic reversible circuit is essentially a closed loop. to the reservoir through a special shuttle spool, before
The oil returning from the system is fed back into the it reaches the pump. Full relief valve pressure is then
pump inlet. When a cylinder is being retracted more available to retract the cylinder, also preventing a pressure
oil is being returned to the power unit than is leaving it switch from tripping before the full retract position is
due to the rod volume. This results in the DN side relief achieved.
valve cracking open allowing the rod volume of oil to go Recommended uses:
back to the tank. The larger the rod volume the more • In systems where work is being done on the
open the relief valve will be. In many applications this retract stroke
is not a problem. However, if work is being done on the • Where a pressure switch is used to signal the full
retract stroke, or if a pressure switch is used to signal retract position
• In systems requiring a faster retract than extend
the cylinder is fully retracted, the back pressure circuit is speed
required. This circuit allows the rod volume of oil to return

13 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Dimensions Hydraulic Power Units

Reservoir Dimensions
Note: refer to page 16 for information on the H, I, J, P, Q, R and S reservoirs.

Note: Aside from the electric

motors, 108 Series and 165
Series Power Units have the
same dimensions.

THIRD ANGLE
PROJECTION
165 Series shown with “G” reservoir
114.3 Ø80
(4.50) (3.15)

2X 5/16-18 UNC-2A

127.8
(5.03)

SAE4 STR THD O-RING PORT

1/8 - 28 BSPP X .45 or
7/16 - 20 UNF - 2B X .44 2 MOUNTING HOLES
M10X1.5 X .6
OR
3/8-16 UNC - 2B X .44
30.7
321.8 (1.21)
(12.67)
VERTICAL UNITS

HORIZONTAL UNITS

164.1
(6.46)

135.6
(5.34)

79.8
(3.14)

Ø101.6
29.4 29.4
29.2 29.2 (4.00)
(1.16) (1.16)
(1.15) (1.15)
114.5
113 (4.51)
(4.45)

Note: All dimensions in mm (inches).

14 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Dimensions Hydraulic Power Units

108 Series shown with Series Wound

motor and “A” reservoir

2X HOLE Ø 6,9 (.26)

THIRD ANGLE
HOLE Ø 8,3 (.33)
PROJECTION

178
(7.00)
113,3
96 (4.46)
96 (3.78)
(3.78)

151,3
(5.96) 168,8
(6.64)

PORTS
264,4
(10.41)

30,7
(1.21)

95,6 MOUNTING HOLES

82,3 (3.77)
(3.24) 2X M10X1.5 .6 MIN
OR
3/8 - 16 UNC - 2B
X .44MIN

93,9 29,4
29,2 29,2 (Ø3.70) 29,4
(1.15) (1.15) (1.16) (1.16)

118/175 Series with solenoid

manifold and “D” reservoir 1/8 - 28 BSPP

(motor shown is 108/118

OR
SAE 4 PORT 7/16-20

Series Permanent Magnet) 22,9

(.90)

Please contact Oildyne for detailed

Ø75,4
118/175 adapter dimensions.
(2.97) 132,5
(5.22)

SOLENOID 24 VDC MOTOR

VALVE

2X 330 +/- 25 126,2

(13 +/- 1) (4.97)
OPTIONAL
PRESSURE
PORT (PLUGGED)
2X M10X1.5 .6 MIN
OR RESERVOIR
3/8 - 16 UNC - 2B 242,3 FILLER CAP
X .44MIN (9.54)
17,5
(.69) 30,7
(1.21) 194,7
(7.67)

85,4
(3.36)

51,3 64,9
29,4 29,4 (2.02) (2.55)
137,2
(1.16) (1.16) (5.40) 172,5
158,4
(6.24) (6.79)

Note: All dimensions in mm (inches).

15 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
 Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
Dimensions Hydraulic Power Units

165 Series with H, I, and J reservoirs

149,2
(5.88)

172,5 1/2 GAL. 1 GAL. 1.5 GAL.

(6.79) Ø142,3
(2 LITER) (4 LITER) (5.6 LITER) (5.60)

179
(7.05)
304,8
(12.00)

406,4
(16.00)

108 Series with HA/HD Motor and P, Q,

R, and S reservoirs
7x 508.0 ±25.4 FROM SHELL
(20.0 ±1.0 FROM SHELL)

113
(4.45)

170,1
(6.70) 3 QUART 1.0 GALLON 152,4
1 QUART 1/2 GALLON
(1 LITER) (2 LITER) (3 LITER) (4 LITER) (6.00)

143,4
(5.65)
160,8 30,7 220,9
(6.33) (1.21) (8.70)
312,3
(12.29)
403,8
(15.90)

Note: All dimensions in mm (inches).

16 Parker Hannifin
HPS Division
New Hope, MN 55428 USA
 Catalog HY22-1131/US Oildyne 108/118 and 165/175 Series
PARKER-HANNIFIN CORPORATION
Dimensions Hydraulic Power Units
OFFER OF SALE
The goods, services or work (referred to as the “Products”) offered by Parker-Hannifin Corporation, its subsidiaries, groups, divisions, and authorized distributors (“Seller”) are offered
for sale at prices indicated in the offer, or as may be established by Seller. The offer to sell the Products and acceptance of Seller’s offer by any customer (“Buyer”) is contingent upon,
and will be governed by all of the terms and conditions contained in this Offer of Sale. Buyer’s order for any Products specified in Buyer’s purchase document or Seller’s offer, proposal
or quote (“Quote”) attached to the purchase order, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions. Seller’s willingness to offer Products for sale or accept an 11. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller
order for Products is subject to the terms and conditions contained in this Offer of Sale or harmless from any losses, claims, liabilities, damages, lawsuits, judgments and costs
any newer version of the same, published by Seller electronically at (including attorney fees and defense costs), whether for personal injury, property damage,
www.parker.com/saleterms/. Seller objects to any contrary or additional terms or patent, trademark or copyright infringement or any other claim, brought by or incurred by
conditions of Buyer’s order or any other document or other communication issued by Buyer, Buyer’s employees, or any other person, arising out of: (a) improper selection,
Buyer. application, design, specification or other misuse of Products purchased by Buyer from
2. Price; Payment. Prices stated on Seller’s Quote are valid for thirty (30) days, except Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use of patterns,
as explicitly otherwise stated therein, and do not include any sales, use, or other taxes or plans, drawings, or specifications furnished by Buyer to manufacture Products; or (d)
duties unless specifically stated. Seller reserves the right to modify prices to adjust for Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer
any raw material price fluctuations. Unless otherwise specified by Seller, all prices are under any circumstance except as otherwise provided.
F.C.A. Seller's facility (INCOTERMS 2010). Payment is subject to credit approval and 12. Cancellations and Changes. Buyer may not cancel or modify or cancel any order for
payment for all purchases is due thirty (30) days from the date of invoice (or such date any reason, except with Seller's written consent and upon terms that will indemnify, defend
as may be specified by Seller’s Credit Department). Unpaid invoices beyond the and hold Seller harmless against all direct, incidental and consequential loss or damage.
specified payment date incur interest at the rate of 1.5% per month or the maximum Seller may change Product features, specifications, designs and availability.
allowable rate under applicable law.
13. Limitation on Assignment. Buyer may not assign its rights or obligations under this
3. Shipment; Delivery; Title and Risk of Loss. All delivery dates are approximate. agreement without the prior written consent of Seller.
Seller is not responsible for damages resulting from any delay. Regardless of the
14. Force Majeure. Seller does not assume the risk and is not liable for delay or failure to
manner of shipment, delivery occurs and title and risk of loss or damage pass to Buyer,
perform any of Seller’s obligations by reason of events or circumstances beyond its
upon placement of the Products with the shipment carrier at Seller's facility. Unless
reasonable control (hereinafter “Events of Force Majeure”). Events of Force Majeure shall
otherwise stated, Seller may exercise its judgment in choosing the carrier and means of
include without limitation: accidents, strikes or labor disputes, acts of any government or
delivery. No deferment of shipment at Buyers' request beyond the respective dates
government agency, acts of nature, delays or failures in delivery from carriers or suppliers,
indicated will be made except on terms that will indemnify, defend and hold Seller
shortages of materials, or any other cause beyond Seller’s reasonable control.
harmless against all loss and additional expense. Buyer shall be responsible for any
additional shipping charges incurred by Seller due to Buyer’s acts or omissions. 15. Waiver and Severability. Failure to enforce any provision of this agreement will not
invalidate that provision; nor will any such failure prejudice Seller’s right to enforce that
4. Warranty. Seller warrants that the Products sold hereunder shall be free from
provision in the future. Invalidation of any provision of this agreement by legislation or other
defects in material or workmanship for a period of twelve (12) months from the date of
rule of law shall not invalidate any other provision herein. The remaining provisions of this
delivery or 2,000 hours of normal use, whichever occurs first. All prices are based upon
agreement will remain in full force and effect.
the exclusive limited warranty stated above, and upon the following disclaimer:
DISCLAIMER OF WARRANTY: THIS WARRANTY IS THE SOLE AND ENTIRE 16. Termination. Seller may terminate this agreement for any reason and at any time by
WARRANTY PERTAINING TO PRODUCTS PROVIDED. SELLER DISCLAIMS ALL giving Buyer thirty (30) days prior written notice. Seller may immediately terminate this
OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING DESIGN, agreement, in writing, if Buyer: (a) breaches any provision of this agreement (b) appoints a
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. trustee, receiver or custodian for all or any part of Buyer’s property (c) files a petition for
5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products relief in bankruptcy on its own behalf, or one if filed by a third party (d) makes an
upon receipt. No claims for shortages will be allowed unless reported to the Seller within assignment for the benefit of creditors; or (e) dissolves its business or liquidates all or a
ten (10) days of delivery. No other claims against Seller will be allowed unless asserted majority of its assets.
in writing within thirty (30) days after delivery. Buyer shall notify Seller of any alleged 17. Governing Law. This agreement and the sale and delivery of all Products are deemed
breach of warranty within thirty (30) days after the date the defect is or should have been to have taken place in, and shall be governed and construed in accordance with, the laws
discovered by Buyer. Any claim or action against Seller based upon breach of contract of the State of Ohio, as applicable to contracts executed and wholly performed therein and
or any other theory, including tort, negligence, or otherwise must be commenced within without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the
twelve (12) months from the date of the alleged breach or other alleged event, without exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any
regard to the date of discovery. dispute, controversy or claim arising out of or relating to this agreement.
6. LIMITATION OF LIABILITY. IN THE EVENT OF A BREACH OF WARRANTY, 18. Indemnity for Infringement of Intellectual Property Rights. Seller is not liable for
SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar
REFUND THE PURCHASE PRICE WITHIN A REASONABLE PERIOD OF TIME. IN rights except as provided in this Section. Seller will defend and indemnify Buyer against
NO EVENT IS SELLER LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and
CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will pay
SALE, DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF USE OF THE
PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF the cost of any settlement or damages awarded in an action brought against Buyer based
ANY NATURE INCURRED WITHOUT SELLER'S WRITTEN CONSENT, WHETHER on an allegation that a Product sold pursuant to this agreement infringes the Intellectual
BASED IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL Property Rights of a third party. Seller's obligation to defend and indemnify Buyer is
SELLER'S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of
PURCHASE PRICE OF THE PRODUCTS. such allegations of infringement, and Seller having sole control over the defense of any
allegations or actions including all negotiations for settlement or compromise. If a Product is
7. User Responsibility. The user, through its own analysis and testing, is solely subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller
responsible for making the final selection of the system and Product and assuring that may, at its sole expense and option, procure for Buyer the right to continue using the
all performance, endurance, maintenance, safety and warning requirements of the Product, replace or modify the Product so as to make it noninfringing, or offer to accept
application are met. The user must analyze all aspects of the application and follow return of the Product and refund the purchase price less a reasonable allowance for
applicable industry standards and Product information. If Seller provides Product or depreciation. Notwithstanding the foregoing, Seller is not liable for claims of infringement
system options based upon data or specifications provided by the user, the user is based on information provided by Buyer, or directed to Products delivered hereunder for
responsible for determining that such data and specifications are suitable and sufficient which the designs are specified in whole or part by Buyer, or infringements resulting from
for all applications and reasonably foreseeable uses of the Products or systems. the modification, combination or use in a system of any Product sold hereunder. The
8. Loss to Buyer's Property. Any designs, tools, patterns, materials, drawings, foregoing provisions of this Section constitute Seller's sole and exclusive liability and
confidential information or equipment furnished by Buyer or any other items which Buyer's sole and exclusive remedy for infringement of Intellectual Property Rights.
become Buyer's property, will be considered obsolete and may be destroyed by Seller 19. Entire Agreement. This agreement contains the entire agreement between the Buyer
after two (2) consecutive years have elapsed without Buyer ordering the items and Seller and constitutes the final, complete and exclusive expression of the terms of sale
manufactured using such property. Seller shall not be responsible for any loss or All prior or contemporaneous written or oral agreements or negotiations with respect to the.
damage to such property while it is in Seller's possession or control. subject matter are herein merged. The terms contained herein may not be modified unless
9. Special Tooling. A tooling charge may be imposed for any special tooling, including in writing and signed by an authorized representative of Seller.
without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. 20. Compliance with Laws. Buyer agrees to comply with all applicable laws, regulations,
Such special tooling shall be and remain Seller's property notwithstanding payment of and industry and professional standards of care, including those of the United Kingdom
any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging the United States of America, and the country or countries in which Buyer may operate,,
to Seller which is utilized in the manufacture of the Products, even if such apparatus has including without limitation the U. K. Bribery Act, the U.S. Foreign Corrupt Practices Act
been specially converted or adapted for such manufacture and notwithstanding any (“FCPA”), the U.S. Anti-Kickback Act (“Anti-Kickback Act”) and the U.S. Food Drug and
charges paid by Buyer. Unless otherwise agreed, Seller has the right to alter, discard or Cosmetic Act (“FDCA”),each as currently amended, and the rules and regulations
otherwise dispose of any special tooling or other property in its sole discretion at any promulgated by the U.S. Food and Drug Administration (“FDA”), and agrees to indemnify
time. and hold harmless Seller from the consequences of any violation of such provisions by
10. Buyer's Obligation; Rights of Seller. To secure payment of all sums due or Buyer, its employees or agents. Buyer acknowledges that it is familiar with the provisions
otherwise, Seller retains a security interest in all Products delivered to Buyer and this of the U. K. Bribery Act, the FCPA, the FDA, and the Anti-Kickback Act, and certifies that
agreement is deemed to be a Security Agreement under the Uniform Commercial Code. Buyer will adhere to the requirements thereof. In particular, Buyer represents and agrees
Buyer authorizes Seller as its attorney to execute and file on Buyer's behalf all that Buyer will not make any payment or give anything of value, directly or indirectly to any
documents Seller deems necessary to perfect its security interest. governmental official, any foreign political party or official thereof, any candidate for foreign
political office, or any commercial entity or person, for the purpose of influencing such
person to purchase Products or otherwise benefit the business of Seller.

Parker Hannifin
5/14
47
HPS Division
New Hope, MN 55428 USA
05/14