Scribd Logo
Upload

Welcome to Scribd!

  • 128 views

    Troubleshooting - ERAB Drop Rate Increased Due To Signal Reflection From Water

    Uploaded by

    Веселый Лунтик
    E-RAB drop and poor intra-frequency handover success rates were occurring due to signal reflection from nearby water and fluctuations between cells. The root cause was determined to be an antenna height of 50 meters, causing overshooting signals over long distances. To solve this, the cell individual offset was changed from 0 to -4dB and later to -8dB to reduce ping-pong handovers between cells. This improvement stabilized the signals and increased E-RAB and handover success.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Troubleshooting - ERAB Drop Rate Increased Due To Signal Reflection From Water

    Uploaded by

    Веселый Лунтик
    128 views3 pages
    E-RAB drop and poor intra-frequency handover success rates were occurring due to signal reflection from nearby water and fluctuations between cells. The root cause was determined to be an antenna height of 50 meters, causing overshooting signals over long distances. To solve this, the cell individual offset was changed from 0 to -4dB and later to -8dB to reduce ping-pong handovers between cells. This improvement stabilized the signals and increased E-RAB and handover success.

    Original Description:

    Huawei

    Original Title

    Troubleshooting_ERAB Drop Rate Increased Due to Signal Reflection From Water

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    E-RAB drop and poor intra-frequency handover success rates were occurring due to signal reflection from nearby water and fluctuations between cells. The root cause was determined to be an antenna height of 50 meters, causing overshooting signals over long distances. To solve this, the cell individual offset was changed from 0 to -4dB and later to -8dB to reduce ping-pong handovers between cells. This improvement stabilized the signals and increased E-RAB and handover success.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    128 views3 pages

    Troubleshooting - ERAB Drop Rate Increased Due To Signal Reflection From Water

    Uploaded by

    Веселый Лунтик
    E-RAB drop and poor intra-frequency handover success rates were occurring due to signal reflection from nearby water and fluctuations between cells. The root cause was determined to be an antenna height of 50 meters, causing overshooting signals over long distances. To solve this, the cell individual offset was changed from 0 to -4dB and later to -8dB to reduce ping-pong handovers between cells. This improvement stabilized the signals and increased E-RAB and handover success.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    [Problem Description]

    ERAB Drop and Intra Frequency Success Rate degraded due to overshooting and
    signal Fluctuation from water.

    1. E-RAB drop increased due to Uplink coverage and observed more uplink
    Interfernce also.

    [Analysis]

    1. All E-RAB drop was happening because of poor Radio and peg in
    L.E-RAB.AbnormRel.Radio counter

    2. All E-RAB drop was happening because of poor Radio condition and peg in
    L.E-RAB.AbnormRel.Radio counter.

    [Root Cause]

    1. Signal Reflection from water is main cause of E-RAB drop and Poor Intrafreq
    HO Success Rate degradation.
    2. It observed that maximum no. of HO Failures with target cells due to signals
    fluctuation of target and source cell.

    2018-5-31 Huawei Confidential Page 1 of 3


    3. Also Intrafrequency HO success rate was degraded due to Ping-pong
    Handover between source cell (RAB-1299_L-3) to target cells
    (RAB-1526_L-3).

    4. After site visit it observed that the Antenna Height of source cell is 50 meter
    that’s why this signal is overshooting at large distance

    [Solution]

    1. To control the E-RAB drop and improve the Intra Frequency HO Success Rate
    I have changed the CIO from 0 to -4 db with target cell to avoid the
    Ping-pong Handover between source cell (RAB-1301_L-3) to target cells
    (RAB-1526_L-3).

    After changes the Cell Individual offset (CIO) from 0 to -8 the E-RAB has been
    improved now. Below is the KPI Trend for your ref.

    2018-5-31 Huawei Confidential Page 2 of 3


    Cell Individual offset (CIO) from 0 to -8: Below is the mml command to changed the
    CIO.

    Parameter description:

    Indicates the cell individual offset for the intra-frequency neighboring cell,
    Meaning
    which is used in evaluation for handovers. It affects the probability of
    triggering intra-frequency measurement reports. A larger value of this
    parameter indicates a higher probability.

    2018-5-31 Huawei Confidential Page 3 of 3

    You might also like