Products For Agri Sector

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

PRODUCTS FOR AGRI SECTOR

Minilec offers a range of products for protection of


water pumps used by farmers. These are primarily
to monitor incoming 3-phase supply for Single
Phasing, Reverse Phasing and unbalanced supply
and stop the pump in case of any fault. Additional
features in some models include auto restarting.
The products are specifically produced for
marketing and use in India only.
MODELS
VSP2, VSP3,
Autoswitch-2, Autoswitch-4, Autoswitch-5,
Autoswitch-6, F3 PGA1

FEATURES PROTECTIONS / FUNCTIONS


• Monitor incoming • Single Phasing
3-phase supply • Reverse Phasing
• Models with pre-wired connections
• Unbalanced supply
• Easy to fit inside most motor starters
• Dry running
• Switch for Auto-Manual operations
• Switch provision either built-in or • On Delay to avoid immediate re-
external starting of pumps during auto mode
• Adjustable on time delay
• All protections in auto & manual
modes
• Built-in timer for star-delta
operation
Ordering Instructions
ü Product Family Name
ü Model Name
ü System Name
ü System Supply Voltage
ü Aux. Supply / Control
supply voltage
ü Motor rating (HP / KW)
ü Motor applications
65
P R O D U C T S F O R A G R I S E C T O R

VSP2 VSP3 Auto switch - 2

Smallest size of single Single phasing, reverse phasing, Single phasing, reverse
phasing preventor unbalanced supply phasing, unbalanced supply
Single phasing, reverse Auto reset, 1 NO output contact Auto reset, 1 NO output contact
phasing, unbalanced supply Suitable for any HP/kW rating On time delay 1/3/5 Minutes
Auto reset, 1 NO output monoblock pumps (Fixed) Auto-Manual switch
contact Suitable for any Pre-wired terminals for easy built-in on front. Suitable for
HP/kW rating monoblock connections any HP/kW rating pumps. Pre-
pumps wired terminals for easy
connections
Supply Voltage 415 VAC ± 20%, 50 Hz ± 3% 415V AC ± 20%, 50 Hz ± 3% 200 - 450, 50 Hz ± 3%
Output Relay Contact 1 NO 1 NO 1 NO
Output Contact Rating 5 Amp, 240 VAC (RESISTIVE) 5 Amp, 240 VAC (RESISTIVE) 5 Amp, 240 VAC (RESISTIVE)
Unbalance Trip Setting 40 V ±6 V 50 V ± 10 VAC 50 V ± 10 VAC
Trip Time Delay
For unbalance 3.5 sec. ±1.5 sec. 3.5 sec. ±1.5 sec. 4 sec ± 2 sec
Dry Run Setting N.A. N.A. N.A.
On Time Delay N.A. N.A. 1 / 3 / 5 min
Star-Delta Changeover Time Delay N.A. N.A. N.A.
Resetting Auto Reset Auto Reset Auto Reset
Auto Switch N. A. N. A. Present
Enclosure HIP moulded, with Nylon connector strip HIP moulded Housing: HIP / Mounting Clamp: Nylon 6
Dimensions (mm)
Overall ( H x W x D ) 103 x 66 x 43 103 x 66 x 43 102 X 35 X 81 mm
Mounting 91 x 48 91 x 48 90 mm Centre to Centre
Mounting Panel Mounting Panel Mounting Panel Mounting
Weight 260gms 250gms 300gms
Level sensor
Quantity - - -
Dimensions - - -
Operating Conditions
Temperature -5 °C TO + 60 °C -5 °C TO + 60 °C -5 °C TO + 60 °C
Humidity Upto 95% Rh Upto 95% Rh Upto 95% Rh

X X X X X X Remove this link


R Y B X X X X X X R Y B
Remove this link R Y B X X X X X X
RED
Remove this link YELOW
BLUE
X X X X X X X X X X
R Y B X X X X X R Y B
X
R Y B R Y B X
X R Y B
R Y B
X
X GREEN
X
X
X X
GREEN
X
X X
X
RED X X
RED
X YELOW X YELOW
X X X X X
BLUE BLUE X X GRAY

GRAY GRAY
GRAY GRAY GRAY

66
P R O D U C T S F O R A G R I S E C T O R

Auto switch - 4 Auto switch - 5 Auto switch - 6 F3 PGA1

Single phasing, reverse Single phasing, reverse phasing, Single phasing, reverse phasing, Autoswitch with dry run
phasing, unbalanced supply unbalanced supply unbalanced supply protection. Auto reset for
Auto reset, 1 NO output contact Auto reset, 1 NO output contact, Auto reset, 1 NO output contact, phase failure faults &
On time delay 1 to 10 Minutes On time delay 1 to 10 Minutes On time delay 2 to 3 Minutes manual reset for dry run.
(Adjustable) Auto-Manual (Adjustable), Provision for (fixed), Star Delta Changeover Auto/Manual switch.
switch built-in on front. connecting Auto-Manual switch Timer, Auto-Manual switch 1 CO output contact.
Suitable for any HP/kW rating externally, Suitable for any built-in on front, Suitable for any 20 Amps. inbuilt CT,
pumps. Pre-wired terminals HP/kW rating pumps, Pre-wired HP/kW rating pumps, Pre-wired Indications Relay ON
for easy connections terminals for easy connections terminals for easy connections Green, Dry run Red
200 - 450, 50 Hz ± 3% 200 - 450, 50 Hz ± 3% 200 - 450, 50 Hz ± 3% 200 - 450, 50 Hz ± 3%
1 NO 1 NO 1 NO + 1 NO 1 CO
5 Amp, 240 VAC (RESISTIVE) 5 Amp, 240 VAC (RESISTIVE) 5 Amp, 240 VAC (RESISTIVE) 5 Amp, 240 VAC (RESISTIVE)
50 V ± 10 VAC 50 V ± 10 VAC 50V ± 10V 50 V ± 10 V

4 sec ± 2 sec 4 Sec ± 2 Sec 3.5 Sec ± 1.5 Sec 4 Sec ± 2 Sec
N.A. N.A. N.A. 50% (±10%) of set current
1 to 10 min 1 to 10 min 2 to 3 minutes [In auto mode] 1 Min (In Auto mode)
N.A. N.A. 5 to 7 Sec. N.A.
Auto Reset Auto Reset Auto Reset Auto for SP/UB/RP & Manual Reset for Dry run
Present To be connected externally Present Present
Housing: HIP / Mounting Clamp: Nylon 6 Housing: HIP / Mounting Clamp: Nylon 6 Housing: HIP / Mounting Clamp: Nylon 6 (D2-03) ABS

102 X 35 X 81 mm 102 X 35 X 81 mm 102 x 35 x 81 76 x 56.5 x 117.5


90 mm Centre to Centre 90 mm Centre to Centre 90 mm Centre to Centre 67 x 46
Panel Mounting Panel Mounting Panel Mounting Flush Mounting
300gms 300gms 300gms (Approx.) 350gms

- - - -
- - - -

-5 °C TO + 60 °C -5 °C TO + 60 °C -5 °C TO + 60 °C -5 °C TO + 60 °C
Upto 95% Rh Upto 95% Rh Upto 95% Rh Upto 95% Rh

X X X X X X Remove this link R Y B


R Y B
RED
YELOW RED
YELLOW
BLUE
BLUE
X X X X X GRAY
R Y B P1
X GRAY
R Y B

X GREEN
OFF SHORT LINK
X
GREEN
M Y
X
ON
A1 B1 C1 C2 A2 B2
X
YNO
MNO
X
X X GRAY M
Y M YNC
GRAY NC
P2

GREEN

GREEN

R Y B
SINGLE PHASING PREVENTER
SELECTABLE ON DELAY TIMER (1 - 10 MIN)
EXTERNAL AUTO / MANUAL SWITCH
BLUE
YELLOW
RED

X EXT. DPDT
STOP SWITCH
GREEN
X
START
GREEN
X
AUTO MAN

X N/V COIL GRAY

X GRAY
X
M X

X X X X X
X X X REMOVE THIS LINK

Remove this Link

67

You might also like