Specification FOR Round Spur For Orthopaedic Calipers: (Reaffirmed 1997)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

UDC 815’477’2 IS : 5964.

197
(-First Reprint FEBRUARY 1983 )
( Reaffirmed 1997 )
Indian Standard
i
SPECIFICATION FOR
ROUND SPUR FOR ORTHOPAEDIC CALIPERS

1. Scope- Dimensional and other requirements of round spur for orthopaedic calipers.

2. Shape and Dimensions -As shown in Fig. 1.

0 DIA LA
I I

i ,j: 1

X--l t

SECTION XX

All dimensions in milllmetrss.

8120~ L. h La 4 D(Dla)
1 160 11 3 ‘20 6
2 185 13 3 30. 6
3 225 18 4 Iw) 8
4 255 15 5 40 8

FIG. 1 ROUND SPUR FOR ORTHOPAEDIC CALIPERS

3. Material - Cold rolled mild steel.

4. Workmanship and Finish -The spur pin shall be soundly fixed by riveting. It shall be square
with the longitudinal axis of the spur. All surfaces shall be finished smooth and free from surface
defects and tool marks. All sharp edges shall be removed.

5. Marking- The joint shall be marked with the following:

a) Manufacturer’s name, initials or recognized trade-mark: and


b) Size of the joint ( see Fig. 1 ).

5.1 I.9 Certification Marking - Details available from the Indian Standards Institution.

6. Packing - As agreed to between the purchaser and the supplier.

Adopted !Z!i January 1071 @ June 1971, ISI Gr 1


I I

INDIAN STANDARDS INSTITUTION


MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002

You might also like