MD100 series filters

MD100-40, MD100-10, MD100-5, MD100-BD-4, LXBP10

High density 100Ghz spaced filters

The MD100 series filter modules provide high-density optical

✓ Highly flexible filter multiplexer/demultiplexer functionality for the Sorrento GigaMux 3200 and 1600
architecture for GigaMux optical transport systems. In supporting a high-density 40 channel architecture, the
GM3200/1600 systems MD100 series filters allow operators to maximize the capabilities of their existing
fiber infrastructure with native protocol support on a per-wavelength basis.
✓ Multiple options provide
The MD100-40 operates on ITU 100GHz channel spacing and covers ITU channels
cost per port flexibility for
from ITU-20 to ITU-59. Channel inputs and outputs for the module are grouped to
low and high channel
correspond to the band definitions described in the following table. ITU Channel
counts
20-59 4 x 10 channel groups (20-29, 30-39, 40-49, 50-59) 8 x 5 channel groups
(20-24, 25-29, 30-35, 35-39, 40-44, 45-49, 50-54, 55-59)
✓ High-Density — Conserves
on Rack Space and shelf These are supported through the following module types: MD100-40 Single three slot
space module with full mux/demux for all 40 ITU C band channels from 20-59. Includes a
5% passive monitor port for channel observation and monitoring through external
✓ Built-In Monitor test-sets.
Taps/Express portsfor easy
MD100-10 Single two slot module with full mux/demux for 10 channels within the
network integration
ITU C-band. The channel groups are broken into 4 x 10 channel groups (20-29,
30-39, 40-49, 50-59) with express pass-through of all other channels. Internal VOA's
✓ Low dB loss, enabling
provide power balancing of the add/dropped channels with pass-through channels
longer link distances
for management of channel updates as the network grows over time.

✓ Multi-drop application MD100-5 Single two slot module with full mux/demux for 5 channels within the ITU
support - enables cost C-band. The channel groups are broken into 8 x 5 channel groups (20-24, 25-29,
effective client multi-port 30-35, 35-39, 40-44, 45-49, 50-54, 55-59) with express pass-through of all other
services channels. Internal VOA's provide power balancing of the add/dropped channels
with pass-through channels for management of channel updates as the network
✓ MTP fan-out cables grows over time.
decrease fiber
MD100-BD-4 Single two slot module that accepts a 40 channel trunk and
management concerns
mux/demuxes into 4 x 10 channel trunks broken into channel groups 20-29, 30-39,
40-49, 50-59. This architecture allows for a low cost, low loss way to break out a
high channel trunk port to multiple remote location for breakout to connected
equipment.

LXBP10 Single slot module that provides a 10 channel trunk add/drop with express
pass-through for all other channels. This trunk allows seemless integration of remote
sites or spurs from the main transport network. This spur sites can then be further
broken down with 5 or 10 channel filters at the endpoint node. These 10 channel
trunks are broken into 4 x 10 channel groups (20-29, 30-39, 40-49, 50-59).

Tap Module Provides a passive optical component to non-instrusively monitor the

network at any site. Ideal for wavelength visibility and troubleshooting.
 DATASHEET MD100 series filters

Technical Specifications
Dimensions Protocol Support Regulatory Compliance
■ Single Slot: 4" H x .8" W x 8.25" D (100 mm x ■ All channel spacings at 100Ghz using ITU ■ (When properly installed in a GigaMux Chassis)
20 mm x 210 mm) C-Band 20-59 ■ CE (GM 3234/3217/1608)
■ Dual-Slot: 4" H x 1.6" W x 8.25" D (100 mm x ■ MD100-40 ■ Telcordia NEBS Level 3 Compliant
40 mm x 210 mm) ■ Insertion Loss: <5.5 dB ■ (GM 3234/3217)
■ Three-Slot: 4" H x 2.4" W x 8.25" D (100 mm x ■ Adjacent Channel Isolation: >25 dB ■ OSMINE TIRKS and NMA
60 mm x 210 mm) ■ Passband Uniformity: <1 dB ■ Safety UL 1950, 3rd Edition
■ MD100-10 ■ IEC 60950, 3rd Edition
Interfaces
■ Insertion Loss: <5 dB ■ (according to CB Scheme)
■ Trunk/Pass-through ports: LC/UPC ■ Pass-through Loss: 1 dB typical ■ EMC FCC Part 15 Class A (USA)
■ Monitor ports: LC/APC ■ Adjacent Channel Isolation: >25 dB ■ EN 55022 Class A (Europe) GM
■ Breakout connections: MTP to LC/UPC fanout ■ Passband Uniformity: <1 dB ■ 3234/3217
cable ■ Max Attenuation: >25 dB ■ EN 55022 Class B (Europe) GM
■ VOA set accuracy: +/- .5 ■ 1608/1602
Standards Support
■ MD100-5 ■ VCCI Class A (Japan)
■ Standard support for 100Ghz spaced ITU ■ Insertion Loss: <4.5 dB ■ EN61000-3-2/3
C-Band channels 20-59 ■ Pass-through Loss: 1 dB typical ■ Harmonics/Flicker
■ Adjacent Channel Isolation: >25 dB ■ Immunity EN61000-4-2/3/4/5/6/11
■ Passband Uniformity: <1 dB ■ ESD/EI/EFT/Surge/LFCI/VDS
■ Max Attenuation: >25 dB ■ ENV50140-RI
■ VOA set accuracy: +/- .5 ■ Telecom FCC Part 68 (USA)
■ MD100-BD4
■ Insertion (Add/Drop) Loss: 3 dB
■ Pass-through Loss: N/A
■ LXBP10
■ Insertion (Add/Drop) Loss: 1.5 dB
■ Pass-through Loss: 1 dB
 DATASHEET MD100 series filters

Ordering Information

LX12259 40 Channel mux/demux linecard with 5% tap monitor

MD100-10-BAND2 10 Channel mux/demux with express - ITU 20-29

MD100-10-BAND3 10 Channel mux/demux with express - ITU 30-39

MD100-10-BAND4 10 Channel mux/demux with express - ITU 40-49

MD100-10-BAND5 10 Channel mux/demux with express - ITU 50-59

MD100-5-BAND2L 5 Channel mux/demux with express - ITU 20-24

MD100-5-BAND2H 5 Channel mux/demux with express - ITU 25-29

MD100-5-BAND2L 5 Channel mux/demux with express - ITU 30-34

MD100-5-BAND2H 5 Channel mux/demux with express - ITU 35-39

MD100-5-BAND2L 5 Channel mux/demux with express - ITU 40-44

MD100-5-BAND2H 5 Channel mux/demux with express - ITU 45-49

MD100-5-BAND2L 5 Channel mux/demux with express - ITU 50-54

MD100-5-BAND2H 5 Channel mux/demux with express - ITU 55-59

LXBP10-1 10 Channel trunk drop with express - ITU 20-29

LXBP10-2 10 Channel trunk drop with express - ITU 30-39

LXBP10-3 10 Channel trunk drop with express - ITU 40-49

LXBP10-4 10 Channel trunk drop with express - ITU 50-59

MD100-BD-4 4 X 10 Channel band drop filter. Support for Band 2, 3, 4, 5

For more information visit www.sorrentonet.com or e-mail [email protected].

Sorrento Networks, Inc.
Sorrento, the Sorrento logo, and all Sorrento product names are trademarks of Sorrento Networks, Inc. Other brand and product names are
+1 510.577.1499 phone
trademarks of their respective holders.
www.sorrentonet.com Specifications, products, and/or product names are all subject to change without notice.
Copyright 2008 Sorrento Networks, Inc. All rights reserved.
02 12 2008