Scribd
Upload
657 views3 pages

EDC16C9: EGR Off Solution

The document provides instructions for closing the EGR valve on a SAAB 9.3 TiD engine with an EDC16C9 ECU. It involves finding and editing the EGR map in memory location C2B98 to fill the map values with zeros, which will disable EGR operation. Correcting the checksum and saving the modified binary file should then close the EGR valve.

Uploaded by

stepathc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
657 views3 pages

EDC16C9: EGR Off Solution

The document provides instructions for closing the EGR valve on a SAAB 9.3 TiD engine with an EDC16C9 ECU. It involves finding and editing the EGR map in memory location C2B98 to fill the map values with zeros, which will disable EGR operation. Correcting the checksum and saving the modified binary file should then close the EGR valve.

Uploaded by

stepathc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EGR off solution

EDC16C9

Appy for:
OPEL / SAAB 1.9 / 2.4

For more info: www.ecuconnections.com


Car: SAAB 9.3 TiD
HW: 0281013807
SW: 380261

Solution type: close EGR valve

1. Find EGR map (Desired air quantity) - in this file C2B98

2. Turn on 16bit, HiLo, decimal and 2D mode

4. Search after EGR map 4 hysteresis (25x1) like on the pictures below

5. Fill these maps with 0 like on the pictures below


6. Correct checksum and save binary file

7. EGR should be closed from now :)

You might also like