MSME-TOOL ROOM, HYDERABAD
Central Institute of Tool Design
Balanagar, Hyderabad, PIN-500037
Telephone No.-040-2377 1959
Website-www.citdindia.org,
[email protected] (An ISO 9001:2015, ISO 29990:2010, ISO 14001:2004, 50001:2011 Certified Institution)
PROSPECTUS FOR DIPLOMA COURSES
2018 - 19
1. Diploma in Tool, Die & Mould Making (DTDM)
2. Diploma in Production Engineering (DPE)
3. Diploma in Electronics and Communication Engineering (DECE)
4. Diploma in Automation & Robotics Engineering (DARE)
ABOUT CITD
The Central Institute of Tool Design is an ISO 9001:2015, ISO 29990:2010, ISO
14001:2004 & ISO 50001:2011 Certified premier Institute in India providing specialized
training courses in Tool Design and Manufacture/CAD/CAM/CAE, VLSI and Embedded
Systems, Mechatronics & Robotics. The Institute was established in the year 1968 by the
Government of India with the assistance of UNDP and ILO as an executing agency. CITD
was converted into a Government of India Society in 1970 under the administrative
control of the Ministry of MSME. The Development Commissioner, Ministry of MSME is
the ex-officio Chairman of the Governing Council. The Principal Director is the Chief
Executive Officer of the Institute.
AIMS & OBJECTIVES:
a) Training of the technical personnel in design and manufacture of Jigs & Fixture,
Dies & Moulds, Press Tools, CAD/CAM, CAE, VLSI & Embedded Systems,
Mechatronics & Robotics.
b) Provision of advisory, consultancy and common service facility & service to small
scale units including assistance in the design and development of tools for various
processes, Calibration of Mechanical Measuring Instruments.
c) Recommending measures to standardize tools and tooling elements, components
of Jigs & Fixtures, Dies & Moulds, Press Tools and other tools.
d) Production of Jigs & Fixtures, Press Tools, Dies & Moulds, Gauges and Special
Cutting Tools subject to the condition that job works undertaken by the Institute
should suit to the needs of the training.
The Institute has a well equipped Tool Room with sophisticated CNC machines like CNC
EDM , CNC Wire Cut EDM 4-Axis & 5-Axis High Speed Machining Centers, and 3D
Coordinate Measuring Machine with Scanning & Digitization facilities. The Institute is
equipped with latest version of EMCO Table Top CNC Turning and Milling machines with
closed loop system to impart training in CNC Programming.
The Calibration laboratory is set up in CITD with Universal Horizontal Microscope ULM
OPAL600 Carl Zeiss Technology, Germany and Slip Gauge Measuring Unit 826 with
Millitron 1240, Mahr, Germany to Calibrate Limit Gauges, Micrometers, Dial Indicators,
etc.,
The CAD/CAM Centre is equipped with latest hardware like latest Configuration
workstations Systems and software like AutoCAD, Pro-E , CATIA ANSYS, Hypermesh,
Unigraphics, Master CAM , Del CAM, Nastran & Patron, ABACUS, LS-DYNA, Q-FORM,
SOLIDCAST, etc.
The Institute is also equipped with an Automation Centre with Programmable Logic
Control Systems; Hydraulic, Pneumatic, Electronic Controls with Simulators.
The Institute has a special Library with a collection of technical books in Tool other
Engineering fields and subscribes to various International journals like CIRP Annals,
American Machinist, Journal of Engineering Materials & Technology (ASME), Precision
Engineering (JAPAN) and Precision Tool Maker, etc. The documentation center collects
and organizes information and data
useful for the technological advancement in Tool Engineering. For the dissemination of
information, the center publishes a computerized current awareness abstracting bulletin
and provides technical enquiry service.
The Institute also extends its services to the developing countries by imparting
knowledge and necessary skills to their personnel in the field of Tool Design, CAD/CAM,
VLSI & Embedded Systems, Automation, Mechatronics & Robotics.
Various Long Term Courses Approved by AICTE and Conducted By CITD:
1. M.E (CAD/CAM) of 2 years (4 Semesters) duration, in collaboration with Osmania
University.
2. M.E (Tool Design) of 2 years (4 Semesters) duration, in collaboration with Osmania
University.
3. M.E(Design For Manufacture)(DFM) of 2 years (4 Semesters) duration ,in
collaboration with Osmania University.
4. M.Tech (Mechatronics) of 2 years (4 Semesters) duration in collaboration with
JNTUH.
5. Post Diploma in Tool Design (PDTD) – One year duration (2 Semesters).
6. Diploma in Tool, Die & Mould Making – (DTDM) for 10th class passed students with
50% for general & 45% for SC/ST category – 4 years duration, (8 Semesters)
approved by AICTE, New Delhi, and recognized by the State Board of Technical
Education and Training, Govt. of T.S. & A.P equivalent to Diploma in Mechanical
Engineering (DME).
7. Diploma in Production Engineering – (DPE) ) for 10th class passed students – 3 years
duration, (6 Semesters) approved by AICTE, New Delhi, and recognized by the State
Board of Technical Education and Training, Govt. of T.S. & A.P. equivalent to
Diploma in Mechanical Engineering(DME).
8. Diploma in Electronics and Communication Engineering – (DECE) ) for 10th class
passed students – Three years duration, (6 Semesters) approved by AICTE, New
Delhi, and recognized by the State Board of Technical Education and Training,
Govt. of T.S, and A.P. equivalent to Diploma in Electronics & Communication
Engineering (DECE).
9. Diploma in Automation & Robotics Engineering – (DARE) ) for 10th class passed
students– 3 years duration, (6 Semesters) approved by AICTE, New Delhi, and
recognized by the State Board of Technical Education and Training, Govt. of T.S. &
A.P. equivalent to Diploma in Electronics & Communication Engineering (DECE)
Short Term Training Programmes
These courses are tailor made courses to cater to the needs of the specific fields
in Tool Design, Manufacture, Mechatronics & Robotics and CAD/CAM, VLSI &
Embedded Systems for working engineers, supervisors, technicians etc.,
Separate brochures are available and can be had on request.
Specialised Training Programmes
These courses are conducted to update knowledge of technical personnel
working in the Industries in the latest technology in Tool Engineering by
conducting seminars, workshops etc,. The Institute conducts in house training
programs either at the Industries or at CITD in the field of Tool Design,
Mechatronics & Robotics & CAD/CAM , VLSI/ Embedded Systems Training.
1. DIPLOMA COURSES
The Diploma courses conducted by the Institute are approved by AICTE, New Delhi,
and recognized by State Board of Technical Education & Training, Govt. of T.S. and
A.P.
Course No.1 – Diploma in Tool, Die & Mould Making (DTDM)
Duration 4 years (8 Semesters)
Qualification 10th /SSC passed or its equivalent examination from a
recognized Board with minimum 50% marks for general
category candidates and 45% incase of candidates belonging
to SC / ST category.
Age Minimum 15 years
Maximum 19 years as on 01-04-2018
Relaxation up to 5 years for SC/ST Candidates.
No. of seats 60 Seats
Mode of Through Entrance Examination
Selection
Course Fee Rs 19,000 /- per Semester
Course No.2 – Diploma in Production Engineering (DPE)
Duration 3 Years (6 Semesters)
Qualification 10th /SSC passed or its equivalent examination from a
recognized Board.
Age Minimum 15 years
Maximum 19 years as on 01-04-2018
Relaxation up to 5 years for SC/ST Candidates.
No. of seats 60 Seats
Mode of Through Entrance Examination
Selection
Course Fee Rs 19,000 /- per semester
Course No.3 – Diploma in Electronics & Communication Engineering (DECE)
Duration 3 Years (6 Semesters)
Qualification 10th /SSC passed or its equivalent examination from a
recognized Board.
Age Minimum 15 years
Maximum 19 years as on 01-04-2018
Relaxation up to 5 years for SC/ST Candidates.
No. of seats 60 Seats
Mode of Through Entrance Examination
Selection
Course Fee Rs 19,000 /- per semester
Course No.4 – Diploma in Automation & Robotics Engineering (DARE)
Duration 3 Years (6 Semesters)
Qualification 10th /SSC passed or its equivalent examination from a
recognized Board.
Age Minimum 15 years
Maximum 19 years as on 01-04-2018
Relaxation up to 5 years for SC/ST Candidates.
No. of seats 60 Seats
Mode of Through Entrance Examination
Selection
Course Fee Rs 19,000 /- per semester
Use of Unfair Means
Use of unfair means by candidate at the entrance examination whether detected at
the time of examination, evaluation or at any stage will lead to cancellation of his/her
admission into the course.
All Diploma Courses
a) Medium of instruction – English
b) Tentative Date for Commencement of course: ________________________
c) Working hours 09:30 a.m. to 05:15 p.m. with Sunday as weekly holiday. (Weekly
holidays & working hours are liable to change.)
Methodology of imparting Training
a) Lectures supported by audio-visual aids.
b) Film shows in technical subjects.
c) Tool Design / Manufacturing exercises.
d) Technical Literature / handouts on related subjects.
e) Working on computers and CNC machines.
f) Expert guest Lectures.
Attendance and eligibility to appear for end examination
Student shall be allowed to appear for the end examinations, if he/she possesses
minimum 75% and above attendance only.
It shall be the responsibility of trainees, parents/guardian of the trainee to maintain the
minimum percentage of attendance prescribed by the Institute. Institute shall not have
any obligation /liability to inform the trainees/parents in this regard. No request for
permission for waiver of minimum prescribed percentage of attendance will be
entertained.
Distribution of marks in each semester for Final Grading:
The following distribution is made for calculating the total marks at the end of the
semester.
Theory Practical
For DTDM
Sessional Marks 40% 40%
Semester Exam 60% 60%
TOTAL 100% 100%
For DPE,DECE &
DARE
Sessional Marks 20% 40%
Semester Exam 80% 60%
TOTAL 100% 100%
Standard of Passing and Award of Class
The final grading for the diploma courses shall be awarded on the basis of the total
aggregate marks obtained in all semesters given.
DTDM DPE,DECE & DARE
75% and above - First Division with 75% and above - First Division with
Distinction Distinction
60% - First Division 60% - First Division
50% - Second Division 50% - Second Division
50% - Minimum marks for Pass in each 35% - Minimum marks for pass in
subject (Theory & Practicals in sessional Theory subjects 28 marks / 80 marks
and semester exam) in end exam and overall 35
50% - Minimum marks for Pass in
Practicals in end exam and in total
marks
Minimum requirement for award of Diploma
A pass in all subjects as mentioned in the table above.
Admission to all Diploma Courses
Academic year commences during June every year. Candidates of all categories selected
through entrance test are admitted to the courses on the basis of rank obtained in the
entrance examination conducted by CITD.
First semester fee is payable on the counseling day and the fee once paid will not be
refunded. The trainees should also deposit caution money of Rs.1,000/- which will be
refunded on successful completion of the course and not before under any
circumstances. Students should also pay Registration fee of Rs.1, 000/- at the time of
admission which is non-refundable.
Applications
A) Application form can be downloaded from our website www.citdindia.org and the filled
in application forms can be sent to The Director (Trg), CITD, Balanagar, Hyderabad-
500 037, along with prescribed application cost by way of Demand Draft drawn in favor
of Principal Director, CITD, Hyderabad or
By Online at www.citdindia.org by selecting PAY ONLINE SBI Payment Gateway
Click the Check Box Proceed Select Payment Category Application Fee
*Select Training Centre Location as Hyderabad and Long Term Course as Diploma
Entrance Exam.
B) Further details can be obtained from Training Department, MSME-Tool Room/ Central
Institute of Tool Deisgn, Balanagar, Hyderabad-500037, on any working day between
9:30 AM and 5:00 PM. (Weekly holiday-Sunday).
Syllabus for Entrance Examination
1) Mathematics, 2) Science, 3) English & 4) Aptitude and General Knowledge of 10th
Standard.
Duration of Entrance Examination-1½ hours and the exam is in Objective type.
Reservation
Reservation exists as per Govt. of India Rules.
Age Relaxation for SC/ST category candidates exist as per Govt. of India Rules.
SC/ST candidates fails to produce a letter of Scholarship sanction from Social Welfare
Department towards course fee / or the course fee etc., he /she will forfeit the seat and
the same will be offered to the next SC/ST candidate in the order of merit.
It is the responsibility of every student claiming scholarships to closely watch our
website /notice board and submit the application form well within the due date for
fresh/renewal as the case may be. However the institute shall forward/co-ordinate with
respective SC/ST/BC departments in sanctioning the same subject to eligibility & rules
from time to time.
The merit list of the candidates will be displayed on the notice board at the Institute as
well as on CITD Website www.citdindia.org. As per the list, all the interested candidates
are required to be present on the counseling day as per the counseling dates along with
all the original certificates & prescribed fees etc. Fee once paid will not be refunded.
Rules made by the Institute regarding selection and closure of admissions shall be final.
Documents to be handed over at the time of counseling for admission-
Original certificates of qualifying examination i.e., SSC, Transfer Certificates, Date of
Birth Certificate, Bonafide Certificate, Integrated Caste Certificate, Latest Income
Certificate, Aadhar Card as applicable,3 passport size colour photograph with name tag
and one stamp size photo.
These original certificates once submitted will not be given back to the trainees
under any circumstances till they complete the scheduled training period at this
Institute. Therefore candidates are advised to take sufficient number of photo
copies to keep with them before submitting the originals to CITD at the time of
counseling.
Certificate of physical fitness from any Assistant Civil Surgeon. The Institute reserves
right to send the candidate for further Medical examination, if necessary.
The trainee should give an undertaking for good conduct and behavior and to abide by
the rules & regulation as prescribed by the Institute.
General Terms and Conditions to be followed during Training:
1. The course fee for next semester should be paid before beginning of the
semester i.e., by 31st July and 31st January of every year. A late fee of
Rs.1000/- per week subject to the maximum of two weeks will be levied if
the semester fee is not paid in time. Thereafter Defaulters are liable to be
terminated from training. Their results of previous semester will be withheld
and they will not be allowed to attend classes for next semester.
2. Safety Goggles, Vernier & Micrometer :Every Diploma trainee must purchase at
his / her own cost one Safety Goggles, One Vernier 0-150mm and one micrometer
0-25 mm, and bring for practicals and for tests as applicable.
3. Hostel: Limited hostel facility is available.
4. Uniforms: All Diploma trainees are required to get the uniforms as prescribed by
the Institute, stitched at their own cost and attend the training in uniform and
with safety shoes everyday. All trainees have to get safety shoes, safety goggles
and wear during practical training.
5. No traveling allowance or any other allowance will be paid for attending entrance
exam, joining the course or on termination thereof.
6. Final year trainees are exposed to campus interviews, by intending industries.
However, the Institute does not guarantee any employment or absorption.
7. The trainees shall not cause any damage or loss to the property of the Institute,
failing which they are liable to bear the loss.
8. Any information given in the application by the candidate, if, found incorrect after
selection, the trainee is liable for such punishment as may be deemed fit including
his/her disqualification and / or dismissed from training course.
9. The trainees are expected to complete the assignments as per schedule of training
programs.
10. The trainees will have to strictly undergo the training as per the schedule and
instructions and comply with all the rules of discipline as may be in force from
time to time. Copying / malpractice during the examinations will be viewed
seriously.
11. The trainees are not permitted to join for any other part-time course without
the permission of the Institute.
12. The trainees are expected to maintain utmost discipline and good manners
inside and outside the campus and not get involved in activities which cause blemish
to the good image of the Institute.
13. The Institute reserves the right to fill – up any vacant seat from among the
candidates present at the time of counseling as per the merit, subject to payment
of requisite fee applicable.
14. No request for extension of time for submission of proof of pass or submission of
original and the trainees have to abide by these rules.
15. The Institute reserves the right to alter, vary change and / or modify the rules
governing the admissions, or any other procedure from time to time depending
upon exigencies of training and the trainees have to abide by these rules.
16. The trainees have to follow the rules and regulations made by the Institute
pertaining to any departments, examinations, hostels, discipline etc.
17. The Institute reserves the right to terminate the trainee at any time at its
discretion for misconduct/indiscipline/irregular attendance, breach of rules etc.
In such an event, the course fee paid by the candidates shall not be refunded.
18. The Institute shall take all precautionary measures with regard to safety. However,
the trainees should decide to join the course at their own free will and at their own
risk. In case of any injury or any disablement (temporary/permanent) suffered by
the trainees during the course due to any accident or otherwise, the Institute shall
not be liable to pay any compensation whatsoever. The trainees shall indemnify
the Institute in this account.
19. Trainees shall arrange at their cost, all stationary, drawing and other instruments
and books prescribed for the course.
20. Ragging of any kind will be viewed seriously and offenders shall be liable to be
prosecuted under the law. Their training will be terminated and the fee paid by
them shall be forfeited. They will not be allowed to rejoin the semesters/course
afresh.
21. The trainees should give an undertaking to abide by the rules & regulations of the
Training.
22. Jurisdiction: All matters concerning the admissions and conducting the course
shall be subject to Hyderabad Jurisdiction only.
Important Dates
Sale of applications starts on : 19-03-2018 (Monday)
Last date for receipt of filled-in applications : 25-04-2018 (Wednesday)
Last date for receipt of filled-in applications with late fee of Rs.500/-:02-05-
2018 (Wednesday)
Date of Entrance exam (Tentative) : 06-05-2018 (Sunday)
Date of Commencement of courses (Tentative) : 11-06-2018 (Monday)
Entrance Test will be held at:
1. HYDERABAD
Main Building,
University College of Engineering
Osmania University,
Hyderabad – 500 007
2. VIJAYAWADA CENTRE: Will be declared in Hall-Ticket.
CITD Reserves the right to decide the Entrance Centre.
For Further Clarification, Please Contact:
Training Department (Diploma Block)
Phone No: 040-2377 1959, Fax: 040-23772658, Email: [email protected]
Website: www.citdindia.org
