LDF4RN-50A.aspx 2 PDF
LDF4RN-50A.aspx 2 PDF
LDF4RN-50A.aspx 2 PDF
LDF4RN
LDF4RN--50A
LDF450, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, gray
nonhalogenated, fire retardant polyolefin jacket
Construction Materials
Jacket Material Nonhalogenated, fire retardant polyolefin
Outer Conductor Material Corrugated copper
Dielectric Material Foam PE
Flexibility Standard
Inner Conductor Material Copperclad aluminum wire
Jacket Color Gray
Dimensions
Nominal Size 1/2 in
Cable Weight 0.15 lb/ft | 0.22 kg/m
Diameter Over Dielectric 12.954 mm | 0.510 in
Diameter Over Jacket 16.002 mm | 0.630 in
Inner Conductor OD 4.8260 mm | 0.1900 in
Outer Conductor OD 13.970 mm | 0.550 in
Electrical Specifications
Cable Impedance 50 ohm ±1 ohm
Capacitance 23.1 pF/ft | 75.8 pF/m
dc Resistance, Inner Conductor 0.450 ohms/kft | 1.480 ohms/km
dc Resistance, Outer Conductor 0.820 ohms/kft | 2.690 ohms/km
dc Test Voltage 4000 V
Inductance 0.190 µH/m | 0.058 µH/ft
Insulation Resistance 100000 Mohms•km
Jacket Spark Test Voltage (rms) 5000 V
Operating Frequency Band 1 – 8800 MHz
Peak Power 40.0 kW
Velocity 88%
Environmental Specifications
Installation Temperature 25 °C to +60 °C (13 °F to +140 °F)
Operating Temperature 30 °C to +80 °C (22 °F to +176 °F)
Storage Temperature 30 °C to +80 °C (22 °F to +176 °F)
General Specifications
Brand HELIAX®
Mechanical Specifications
Bending Moment 3.8 Nm | 2.8 ft lb
Fire Retardancy Test Method UL 1666/CATVR
Flat Plate Crush Strength 110.0 lb/in | 2.0 kg/mm
©2015 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 9, 2014 November 13, 2015
Product Specifications
LDF4RN
LDF4RN--50A
Note
Performance Note Values typical, unless otherwise stated
Standard Conditions
Attenuation, Ambient Temperature 20 °C | 68 °F
Average Power, Ambient Temperature 40 °C | 104 °F
Average Power, Inner Conductor Temperature 100 °C | 212 °F
Return Loss/VSWR
Frequency Band VSWR Return Loss (dB)
680–800 MHz 1.13 24.30
800–960 MHz 1.13 24.30
1700–2200 MHz 1.13 24.30
2300–2700 MHz 1.13 24.30
Attenuation
Frequency (MHz) Attenuation (dB/100 m) Attenuation (dB/100 ft) Average Power (kW)
0.5 0.149 0.045 40.00
1 0.211 0.064 36.11
1.5 0.259 0.079 29.46
2 0.299 0.091 25.50
10 0.672 0.205 11.35
20 0.954 0.291 7.99
30 1.172 0.357 6.51
50 1.521 0.463 5.02
88 2.031 0.619 3.76
100 2.169 0.661 3.52
108 2.256 0.688 3.38
150 2.673 0.815 2.85
174 2.887 0.88 2.64
200 3.103 0.946 2.46
300 3.835 1.169 1.99
400 4.462 1.36 1.71
450 4.749 1.447 1.61
500 5.021 1.53 1.52
512 5.085 1.55 1.50
600 5.533 1.686 1.38
700 6.009 1.831 1.27
800 6.456 1.968 1.18
824 6.56 1.999 1.16
894 6.855 2.089 1.11
©2015 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 9, 2014 November 13, 2015
Product Specifications
LDF4RN
LDF4RN--50A
* Values typical, guaranteed within 5%
Regulatory Compliance/Certifications
Agency Classification
UL/ETL Certification CATVR
RoHS 2011/65/EU Compliant
China RoHS SJ/T 113642006 Below Maximum Concentration Value (MCV)
©2015 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 3
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 9, 2014 November 13, 2015