Scribd
Upload
114 views

SAS3ExpanderXtoolsLite UserGuide

The document provides instructions for installing and using SAS3 ExpanderXtoolsLite software. It describes downloading and installing the software on Windows or Linux operating systems. It then explains how to connect to expanders in-band and download firmware and manufacturing image files to the devices to update them. The instructions guide the user through selecting the expander and region, choosing the firmware file, and waiting for the update to complete.

Uploaded by

medinaalegmail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
114 views

SAS3ExpanderXtoolsLite UserGuide

The document provides instructions for installing and using SAS3 ExpanderXtoolsLite software. It describes downloading and installing the software on Windows or Linux operating systems. It then explains how to connect to expanders in-band and download firmware and manufacturing image files to the devices to update them. The instructions guide the user through selecting the expander and region, choosing the firmware file, and waiting for the update to complete.

Uploaded by

medinaalegmail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Rev. 1.

SAS3 ExpanderXtoolsLite
User’s Guide
Table of Contents
Chapter 1 Installing ExpanderXtoolsLite Software
1-1 Preparing for Installation ....................................................................................... 1-1
1-2 Installing ExpanderXtoolsLite Software ................................................................ 1-2
Installing on a Windows Operating System .................................................... 1-2
Installing on a Linux Operating System .......................................................... 1-2
1-3 Please follow 2-1 procedures to complete the firmware package upgrade……… 1-3

Chapter 2 Using ExpanderXtoolsLite Software


2-1 In Band Connection ............................................................................................... 2-1
SAS Identification Numbers and In Band Connection ..................................... 2-1
Downloading Firmware .................................................................................... 2-1
Downloading the Manufacturing Image Firmware ........................................... 2-1
Chapter 1 Installing ExpanderXtoolsLite Software

1-1 Preparing for Installation


SAS3 ExpanderXtoolsLite software may be used with either a Linux or a Windows operating system.
Following the instructions in the order provided will enable users to install and operate the software
in a short amount of time.

1-2 Installing ExpanderXtoolsLite Software


Installing SAS3ExpanderXtoolsLite on Windows
1. Download SAS3ExpanderXtoolsLite
2. Extract the SAS3ExpanderXtoolsLite_V1.4.rar file into a working subdirectory.
3. Click on the ExpanderXtoolsLite.exe file in Windows folders.

Installing SAS3ExpanderXtoolsLite on Linux 32


1. Download SAS3ExpanderXtoolsLite
2. Extract the SAS3ExpanderXtoolsLite_V1.4.rar file into a working subdirectory.
3. Click on the ExpanderXtoolsLite_32bit file in Linux folders.
# ./ ExpanderXtoolsLite_32bit

Installing SAS3ExpanderXtools on Linux 64


1. Download SAS3ExpanderXtools
2. Extract the SAS3ExpanderXtoolsLite_V1.4.rar file into a working subdirectory.
3. Click on the ExpanderXtoolsLite_64bit file in Linux folders.
# ./ ExpanderXtoolsLite_64bit

1-3 Please follow 2-1 procedures to complete the firmware package


upgrade
Chapter 2 Using ExpanderXtoolsLite Software

2-1 In Band Connection


The following instructions will guide SAS3ExpanderXtoolsLite software users through the in band
connection procedure. Before updating the firmware, it is strongly recommended that you write down
the SAS identification numbers from the backplane.

SAS Identification Numbers and In Band Connection


Obtaining SAS ID Numbers and In Band Connection Procedures
1. Click the Scan Exp button to display the properties of current selected expander.

Figure 2-1: Display the properties of each expander


Downloading Firmware
1. Select the expander to be updated in the List of Expanders dialog box.
2. Region 1 must be updated before other regions.
Select Region 1 and click the Download FW button.

Figure 2-2: Downloading Firmware Region1

3. In “select fw file” window, select the file to be downloaded, usually sas3xfw.fw and
click Open

Figure 2-3: Select the firmware file


4. Wait until the download in Region 1 completes and the Download Successful message
will appear in the dialog box.

5. Repeated step 1 to 4 on Region 2 to complete update the Firmware.


Downloading the Manufacturing Image Firmware
1.Connect Primary expander.

Figure 2-4: SAS3-216EL2 Primary expander

2. Select the expander to be updated in the List of Expanders dialog box.

3. Click the Download MFG button.

Figure 2-5: Downloading MFG Firmware


4. In “select mfg file” window, select the MFG.bin file to be downloaded and click the Open
button.

Figure 2-6: Select MFG Firmware

5. Wait for the Download Successful message to be displayed in the window at the bottom
of the MFG dialog box.

For the EL2 expander FW and MFG update, proceed the same procedure as EL1
expander update.

You might also like