Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Fix Your PC Needs To Be Repaired Error 0x0000034

    Uploaded by

    taz1mx
    This document provides instructions to fix error code 0x0000034 that occurs when partitioning goes wrong during Windows installation or upgrades. It describes two methods: Method 1 involves using installation media to repair the boot configuration data file. The user inserts installation media, selects repair options, and runs commands to fix the MBR, boot sector, and rebuild the BCD file. Method 2 also uses installation media but involves entering commands at the command prompt, including bootrec commands to fix MBR and boot sector and rebuild the BCD file. Running these commands repairs the issue.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Fix Your PC Needs To Be Repaired Error 0x0000034

    Uploaded by

    taz1mx
    156 views2 pages
    This document provides instructions to fix error code 0x0000034 that occurs when partitioning goes wrong during Windows installation or upgrades. It describes two methods: Method 1 involves using installation media to repair the boot configuration data file. The user inserts installation media, selects repair options, and runs commands to fix the MBR, boot sector, and rebuild the BCD file. Method 2 also uses installation media but involves entering commands at the command prompt, including bootrec commands to fix MBR and boot sector and rebuild the BCD file. Running these commands repairs the issue.

    Original Description:

    Fix Your PC Needs to Be Repaired Error 0x0000034 win 8.1 32x

    Original Title

    Fix Your PC Needs to Be Repaired Error 0x0000034

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions to fix error code 0x0000034 that occurs when partitioning goes wrong during Windows installation or upgrades. It describes two methods: Method 1 involves using installation media to repair the boot configuration data file. The user inserts installation media, selects repair options, and runs commands to fix the MBR, boot sector, and rebuild the BCD file. Method 2 also uses installation media but involves entering commands at the command prompt, including bootrec commands to fix MBR and boot sector and rebuild the BCD file. Running these commands repairs the issue.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    156 views2 pages

    Fix Your PC Needs To Be Repaired Error 0x0000034

    Uploaded by

    taz1mx
    This document provides instructions to fix error code 0x0000034 that occurs when partitioning goes wrong during Windows installation or upgrades. It describes two methods: Method 1 involves using installation media to repair the boot configuration data file. The user inserts installation media, selects repair options, and runs commands to fix the MBR, boot sector, and rebuild the BCD file. Method 2 also uses installation media but involves entering commands at the command prompt, including bootrec commands to fix MBR and boot sector and rebuild the BCD file. Running these commands repairs the issue.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Fix: Your PC needs to be repaired Error 0x0000034

    Win 8.1 x32


    The error can occur at any time without any prior warnings or symptoms. The computer
    will automatically shut down and upon restarting, it will show the above given message on
    a blue screen.

    This error code usually appears when partitioning goes wrong either when a manual
    partitioning is done or after Windows OS upgrades. Most of the users described that they
    accidentally deleted the system partition during the installation of the Windows before this
    error occurred.

    Unfortunately, when this error occurs, the user is unable to operate the system effectively
    until the PC is repaired. In order to fix this error, the PC user will need the Installation disc
    or USB for the Windows OS software in the PC. The following should essentially fix the
    problem successfully.

    Method 2: Using Command Prompt ok dell e-1

    You can also use Command Prompt to run a few commands and fix the issue. Basically you
    will use the mounted USB or CD/DBD of your Windows Installation to repair the BCD
    (Boot Configuration Data file).

    For this to work, you need Windows installation media on a USB or CD/DVD.

    1. Insert your Windows Media Installation USB


    2. Follow the steps given in Method 1 from steps 1-7
    3. Select Advanced Options
    4. Select Command Prompt
    5. Type bootrec /fixMBR and press Enter in the Command Prompt
    6. Type bootrec /fixBoot and press Enter
    7. Type bootrec /rebuildBCD and press Enter
    8. Once you are done. You might see a message saying Add installation to boot list.
    Type Y (for yes) when you see that message
    9. You will be able to see an acknowledgement message saying The operation
    completed successfully
    10. Now type exit and press Enter

    Restart your computer and you should be good to go.


    pantalla negra solo se ve el ratón

    1. Reinicia el computador y antes de que empiece a cargar el sistema operativo presiona


    repetidamente la tecla F11 para iniciar el menú de opciones avanzadas de inicio. Si
    presionando la tecla F11 no inicia el menú intenta el mismo procedimiento con la
    combinación de teclas Shif+F8.

    2. Una vez aparezcan las opciones avanzadas de inicio, haz clic sobre Solucionar
    problemas.

    3. Haz clic sobre Opciones avanzadas y luego haz clic sobre Reparación automática.
    Sigue los pasos que allí se indican y cuando el procedimiento termine verifica que el
    problema se haya corregido.

    4. Si el problema persiste repite los pasos del 1 al 3 pero en el paso 3 en lugar de


    seleccionar Reparación automática haz clic en Configuración de inicio. Allí presiona el
    número 5 para iniciar sesión en modo seguro con funciones de red.

    5. Una vez hayas iniciado sesión en modo seguro con funciones de red presiona la
    combinación de teclas Windows+R y en el cuadro de texto digita CMD y presiona enter.

    6. En la línea de comandos digita sfc/scannow y presiona enter. Cuando termine de


    ejecutarse el comando reinicia el computador y verifica que el problema se haya corregido.

    You might also like