Engraving: Engraving Is The Practice of Incising A Design Onto A Hard, Usually Flat Surface by Cutting

ENGRAVING
Engraving is the practice of incising a design onto a hard, usually flat surface by cutting
grooves into it with a burin. The result may be a decorated object in itself, as when silver,
gold, steel, or glass are engraved, or may provide an intaglio printing plate, of copper or
another metal, for printing images on paper as prints or illustrations; these images are also
called "engravings". Engraving is one of the oldest and most important techniques
in printmaking. Wood engraving is a form of relief printing and is not covered in this article.
Engraving was a historically important method of producing images on paper in
artistic printmaking, in mapmaking, and also for commercial reproductions and illustrations
for books and magazines. It has long been replaced by various photographic processes in
its commercial applications and, partly because of the difficulty of learning the technique, is
much less common in printmaking, where it has been largely replaced by etching and other
techniques.
"Engraving" is also loosely but incorrectly used for any old black and white print; it requires
a degree of expertise to distinguish engravings from prints using other techniques such
as etching in particular, but also mezzotint and other techniques. Many old master
prints also combine techniques on the same plate, further confusing matters. Line
engraving and steel engraving cover use for reproductive prints, illustrations in books and
magazines, and similar uses, mostly in the 19th century, and often not actually using
engraving.
Other terms often used for printed engravings are copper engraving, copper-plate
engraving or line engraving. Steel engraving is the same technique, on steel or steel-faced
plates, and was mostly used for banknotes, illustrations for books, magazines and
reproductive prints, letterheads and similar uses from about 1790 to the early 20th century,
when the technique became less popular, except for banknotes and other forms of security
printing. Especially in the past, "engraving" was often used very loosely to cover several
printmaking techniques, so that many so-called engravings were in fact produced by totally
different techniques, such as etching or mezzotint. "Hand engraving" is a term sometimes
used for engraving objects other than printing plates, to inscribe or decorate jewellery,
firearms, trophies, knives and other fine metal goods. Traditional engravings in printmaking
are also "hand engraved", using just the same techniques to make the lines in the plate.

The first evidence for humans engraving patterns is a chiselled shell, dating back between
540,000 and 430,000 years, from Trinil, in Java, Indonesia, where the first Homo erectus
was discovered.[2] Hatched banding upon ostrich eggshells used as water containers found
in South Africa in the Diepkloof Rock Shelter and dated to the Middle Stone Age around
60,000 BC are the next documented case of human engraving.[3] Engraving on bone and
ivory is an important technique for the Art of the Upper Paleolithic, and larger
engraved petroglyphs on rocks are found from many prehistoric periods and cultures
around the world.
In antiquity, the only engraving on metal that could be carried out is the shallow grooves
found in some jewellery after the beginning of the 1st Millennium B.C. The majority of so-
called engraved designs on ancient gold rings or other items were produced by chasing or
sometimes a combination of lost-wax casting and chasing. Engraved gem is a term for any
carved or engraved semi-precious stone; this was an important small-scale art form in the
ancient world, and remained popular until the 19th century.
However the use of glass engraving, usually using a wheel, to cut decorative scenes or
figures into glass vessels, in imitation of hardstone carvings, appears as early as the first
century AD,[4] continuing into the fourth century CE at urban centers such as Cologne and
Rome,[5] and appears to have ceased sometime in the fifth century. Decoration was first
based on Greek mythology, before hunting and circus scenes became popular, as well as
imagery drawn from the Old and New Testament.[5] It appears to have been used to mimic
the appearance of precious metal wares during the same period, including the application
of gold leaf, and could be cut free-hand or with lathes. As many as twenty separate stylistic
workshops have been identified, and it seems likely that the engraver and vessel producer
were separate craftsmen.[4]
In the European Middle Ages goldsmiths used engraving to decorate and inscribe
metalwork. It is thought that they began to print impressions of their designs to record them.
From this grew the engraving of copper printing plates to produce artistic images on paper,
known as old master prints, in Germany in the 1430s. Italy soon followed. Many early
engravers came from a goldsmithing background. The first and greatest period of the
engraving was from about 1470 to 1530, with such masters as Martin Schongauer, Albrecht
Dürer, and Lucas van Leiden.
Thereafter engraving tended to lose ground to etching, which was a much easier technique
for the artist to learn. But many prints combined the two techniques: although Rembrandt's
prints are generally all called etchings for convenience, many of them have some burin or
drypoint work, and some have nothing else. By the nineteenth century, most engraving was
for commercial illustration.
Before the advent of photography, engraving was used to reproduce other forms of art, for
example paintings. Engravings continued to be common in newspapers and many books
into the early 20th century, as they were cheaper to use in printing than photographic
images.
Many classic postage stamps were engraved, although the practice is now mostly confined
to particular countries, or used when a more "elegant" design is desired and a limited color
range is acceptable.Modifying the relief designs on coins is a craft dating back to the 18th
century and today modified coins are known colloquially as hobo nickels.

Engraving: Engraving Is The Practice of Incising A Design Onto A Hard, Usually Flat Surface by Cutting

Uploaded by

Copyright:

Available Formats

Engraving: Engraving Is The Practice of Incising A Design Onto A Hard, Usually Flat Surface by Cutting

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Engraving: Engraving Is The Practice of Incising A Design Onto A Hard, Usually Flat Surface by Cutting

Uploaded by

Copyright:

Available Formats

ENGRAVING

You might also like