The document discusses the Dräger Flame 2000 flame detector. It provides details on its benefits such as being cost-effective, tough, intelligent, and reliable for fire detection. It also describes additional features like automatic and manual testing, visible status LEDs, simple installation, and output options.
The document discusses the Dräger Flame 2000 flame detector. It provides details on its benefits such as being cost-effective, tough, intelligent, and reliable for fire detection. It also describes additional features like automatic and manual testing, visible status LEDs, simple installation, and output options.
The document discusses the Dräger Flame 2000 flame detector. It provides details on its benefits such as being cost-effective, tough, intelligent, and reliable for fire detection. It also describes additional features like automatic and manual testing, visible status LEDs, simple installation, and output options.
The document discusses the Dräger Flame 2000 flame detector. It provides details on its benefits such as being cost-effective, tough, intelligent, and reliable for fire detection. It also describes additional features like automatic and manual testing, visible status LEDs, simple installation, and output options.
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high-quality flame-detectors that fulfil these requirements. 02 | Dräger Flame 2000
Benefits
The Cost-Effective Multi-Talent
The Dräger Flame 2000 uses advanced flame analysis tools to quickly detect hydrocarbon-based fuel and gas fires. With its capability of providing an early warning of flaming fires at 4.5 μm and immunity to false alarms caused by other IR sources such as sunlight IR projectors – the Flame 2000 is the right choice for those who want more performance for less.
Tough And Intelligent
The Flame 2000 is one of the most weather resistant single IR flame detector currently available on the market. It comes with new features such as a heated window to eliminate icing and condensation, HART® capabilities for digital, lower power requirements and a compact, lighter design.
Reliability
Functional safety is a concept applicable across all industry sectors. It is fundamental to enabling complex technology used for safety-related systems. It provides assurance that the safety-related systems will offer necessary risk reduction. The Flame 2000 is highly reliable and complies with the IEC 61508 Safety Integrity Requirements of SIL2.
Automatic and manual optics checks (BIT)
Automatic checks of the detector electronics and optics helps ensure that no fault goes undetected. Additionally the test can be triggered manually at any time.
Easily visible status LED
A tri-colored LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector. Green indicates normal operation; yellow indicates a fault and red indicates the presence of radiation from a fire.
Simple installation and commissioning
Installation is simple! The detector is easily installed with a stainless steel tilt mount which enables the detector to be rotated up to 60° in all directions to position of the detector in relation to the potential fire source.
Further benefits and features:
‒ Sensitivity selection – to ensure no zone crossover detection
‒ Automatic and Manual Built-In-Test (BIT) – to ensure continued reliable operation ‒ Heated window – for operation in harsh weather conditions (snow, ice, condensation) ‒ Multiple output options for maximum flexibility and compatibility Dräger Flame 2000 | 03
Benefits
‒ 3 Relays for Alarm, Fault and Auxiliary
‒ 0 – 20 mA (stepped) ‒ HART® Protocol for maintenance and asset management ‒ RS-485, Modbus compatible ‒ Approved to Safety Integrity Level 2 (SIL2 – TÜV) ‒ Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA ‒ 3rd party performance tested: EN54-10 (VdS), FM3260
System Components
Dräger REGARD® 3900
The Dräger REGARD® 3900 is a standalone, self contained control
system for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable between 1 and 16 channels, depending upon the type and quantity of input/output boards installed. D-27777-2009 04 | Dräger Flame 2000
Accessories
Flame Simulator
The Flame Simulator emits radiation in a unique sequential pattern
corresponding to and recognizable by the detector as fire. This allows the detectors to be tested under simulated fire conditions without the associated risks of an open flame. D-51319-2015
Weather Cover
The Weather Cover protects the detector from different weather
conditions, such as snow or rain. D-5921-2016
Laser Pointer
Does the detector cover the area that needs protection? Is it located correctly and does the detector’s cone of vision cover the most dangerous spot? This accessory enables the installer to optimize detector location and its actual detection area coverage. D-5925-2016
Air Shield
The Air Shield allows the installation of detectors of the Dräger
Flame 2000 series under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter. D-5926-2016 Dräger Flame 2000 | 05
Related Products
Dräger Flame 2100
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high- quality flame-detectors that fulfil these requirements. D-9307-2014
Dräger Flame 2350
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high- quality flame-detectors that fulfil these requirements. D-9289-2014
Dräger Flame 2370
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high- quality flame-detectors that fulfil these requirements. D-9288-2014
Dräger Flame 2500
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high- quality flame-detectors that fulfil these requirements and more. D-9272-2014 06 | Dräger Flame 2000
Related Products
Dräger Flame 2700
Working in areas with combustible gases, vapours or materials requires
fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high- quality flame-detectors that fulfil these requirements. D-9271-2014 Dräger Flame 2000 | 07
Technical Data
Type Explosion proof IR flame detector for hydrocarbon- and hydrogen-based fires Spectral Response IR = 4,4 – 4,6 μm Measuring Performance Field of view Horizontal 90°; Vertical 90° Response Time Typically 5 seconds Sensitivity Ranges 2 Sensitive ranges for 1 ft2 (0.1 m2) n-Heptane pan fire from 15 ft (5 m) to 50 ft (15 m) Detection Range Fuel ft / m (at highest Sensitivity Setting n-Heptane / Gasoline 50 / 15 for 1 ft2 (0.1 m2) pan fire) Diesel Fuel / JP5 / Kerosene 37 / 11 Ethanol 95 % 25 / 7.5 Methanol 25 / 7.5 IPA (Isopropyl Alcohol) 25 / 7.5 Methane* 29.5 / 9 LPG* 43 / 13 Polypropylene Pellets 37 / 11 Office Paper 20 / 6 * 30" (0.75 m) high, 10" (0.25 m) width plume fire
Electrical Data Output Signals 0 – 20 mA (stepped), HART® Fault Signal 0 + 1 mA BIT Fault Signal 2 mA ±10 % Normal Signal 4 mA ±10 % Warning Signal 16 mA ±5 % Alarm Signal 20 mA ±5 % Relays Alarm, Fault and Auxiliary SPST volt-free contacts rated 2 A at 30 VDC RS485 Modbus compatible communication link Power supply 24 VDC nominal (18 – 32 VDC) Power Consumption Standby: Max. 90 mA (110 mA with heated window) Alarm: Max. 130 mA (160 mA with heated window)
Ambient Conditions Temperature -55 to +75 °C / -67 to +167 °F (operating) -55 to +85 °C / -67 to +185 °F (option and storage) Humidity Up to 95 % non-condensing (withstands up to 100 % RH for short periods)
Enclosure Material Stainless steel SS 316 Material Option Heavy duty copper free aluminum, red epoxy enamel finish Connecting Thread 2 × 3/4" – 14NPT or 2 × M25 × 1.5 mm Weight Detector SS 316L 2.8 kg / aluminum 1.3 kg Tilt mount 1.0 kg Dimensions Detector 101.6 × 117 × 157 mm Ingress Protection IP66 and IP67, NEMA 250 6P
Approvals ATEX and IECEx Ex II 2 G D Ex d e IIC T5 Gb Ex d e IIC T4 Gb Ex d e mb IIC T4 Gb Ex tb IIIC T96°C Db Ex tb IIIC T106°C Db Ex tb IIIC T98°C Db (-55 °C ≤ Ta ≤ +75 °C) (-55 °C ≤ Ta ≤ +85 °C) (Ta = -55 °C to +75 °C) 08 | Dräger Flame 2000
Technical Data
FM/FMC/CSA Class I Div. 1, Groups B, C & D
Class II/III Div. 1, Groups E, F & G Safety Integrity Level SIL2 certified by TÜV (EN61508) Performance Approval EN54-10 (VdS) FM3260 CE marking EMI/RFI protected to EN61326-3 and EN61000-6-3
Accessories Flame Simulator FS-1300 (IR) 68 13 975 Dräger Flame 2xx0 Air Shield 68 13 977 Dräger Flame 2xx0 Duct Mount 68 13 978 Tilt Mount Flame Detector 68 13 979 Weather cover Flame Detector (SS) 68 13 189 Weather cover Flame Detector (ABS) 68 13 190 Dräger Flame 2xx0 Laser Pointer 68 13 890 Dräger Flame Pole Mount 3" 68 13 323 Dräger Flame Pole Mount 2" 68 13 322 Dräger Flame USB RS-485 Kit 68 13 994 Battery Pack for Flame Simulator FS1x00 68 13 889 HART® is a registered trademark of the HART® Communication Foundation
CORPORATE HEADQUARTERS REGION DACH REGION MIDDLE EAST, AFRICA REGION CENTRAL Drägerwerk AG & Co. KGaA Dräger Safety AG & Co. KGaA Dräger Safety AG & Co. KGaA AND SOUTH AMERICA Moislinger Allee 53–55 Revalstraße 1 Branch Office Dräger Panama S. de R.L. 23558 Lübeck, Germany 23560 Lübeck, Germany P.O. Box 505108 Complejo Business Park, www.draeger.com Tel +49 451 882 0 Dubai, United Arab Emirates V tower, 10th floor Fax +49 451 882 2080 Tel +971 4 4294 600 Panama City info@draeger.com Fax +971 4 4294 699 Tel +507 377 9100 . contactuae@draeger.com Fax +507 377 9130 REGION EUROPE . contactcsa@draeger.com Dräger Safety AG & Co. KGaA REGION ASIA PACIFIC . Revalstraße 1 Draeger Safety Asia Pte Ltd REGION NORTH AMERICA 23560 Lübeck, Germany 25 International Business Park Draeger, Inc. Tel +49 451 882 0 #04-20/21 German Centre 3135 Quarry Road Fax +49 451 882 2080 Singapore 609916 Telford, PA 18969 info@draeger.com Tel +65 6308 9400 Tel +1 800 4DRAGER . Fax +65 6308 9401 (+1 800 437 2437) asia.pacific@draeger.com Fax +1 215 723 5935 . info.usa@draeger.com . Locate your Regional Sales Representative at: www.draeger.com/contact
