Basic commands

acc[e]/lacc[e] Execute an MO action.

acl/lacl Lists available MO actions.
bl[s]/lbl[s] Lock or soft-lock MO(s).
cr[e] Create an MO.
ctrl-z Abort an MO command or a "for" loop.
deb/ldeb Unlock MO(s).
del/ldel Delete MO(s).
fro/lfro[m] Read MAO data of an MO and/or froid of the MO.
get/lget Read CM/FM attribute(s) from MO(s).
Getmom Check the MOM version currently stored on the Network Element.

hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of
one line per attribute).
kget/lkget Display CM/FM attributes in exportable printout format.
lc[1-9]/lcc Load MO tree (full or partial) and build proxy table.
Ld Load one MO from the tree and add to the proxy table.
lk/llk View all MO's linked to an MO, and their states.
lko/llko The old lk.
lt/ltc[1-9] Load MO tree (full or partial) and build proxy table.
ma/lma Add MO(s) to an MO group.
mom[tcdr] Print description of MO classes.
Mp Print all defined MO groups.
mr/lmr Remove an MO group or remove MOs from an MO group.
Parsemom Parse an xml MOM file.
pol[shcumk] Poll the Network Element until the CM service is up.
pr/lpr Print MO LDNs and proxy ids currently loaded in amos.
Prod Print productData of MO(s).
rdel/lrdel Delete MO(s) together with children and reserving MOs.
re[i] Disconnect and reconnect to the CM/PM service.
rset/lrset Set attribute value on a restricted attribute.
set[m][c]/lset[m][c] Set an attribute value on one or several MO's.
sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get).
shget/lshget Read CM/FM attributes from MO(s), one by one ("Slow" get).
st/lst Print state of MOs.
trun[i] Run a command file in EMAS/MoTester format.
u+[s]/u-/u?/u! Handling of undo mode(for undo of del/rdel/set commands).
Un Run a command file in amos format.

MO commands

al[atkc] Print the list of active alarms.

cab[slxradgtme] Display of miscellaneous COLI printouts.
ced[h][r] Print dynamic cell data or capacity usage <RNC only>
cvls/cvmk/cvms/cvset ConfigurationVersion (CV) handling.
/cvrm/cvcu/cvget
/cvls1
dcg[measrfki] Fetching data for defect reports
diff[0]/ldiff Parameter auditing or MO dump comparisons.
Hc Run a general healthcheck on the Network Element.
Obsolete Command. Use dcg command instead.
inv[hr] Complete HW/SW inventory.
lg[acdefghilmnopqrstuvwxyz] Fetching and processing of logs (alarm, event, etc)
lkr[a] Print RNC Iub resources allocation
remod[u][2] Remodule an IubLink (RNC only).
Resub To move Iub resources within or across Subracks for RNCs
stc[p][r] Display state and configuration of AtmCrossConnections.
std [ar] Display state and configuration of devices.
str[12ft] Print status of the IubLinks/AbisLinks(RNC/BSC only).
stt[r] Display state and user of Physical Ports and Ds0Bundles.
stv[b][r] Display state, user, and bandwidth usage for ATM ports.
tg[r][c][d] Print Resource Object information for MOs in LmCell.
time[t] Measure time taken by an AMOS command
uer[d][t][i][s] Print UE context data for all active calls (RNC only).
PM commands

Emom Display list of events for event-based scanners.

hpget[c]/lhpget[c] Read PM attribute(s) from MO(s).
pdiff/lpdiff Print incrementation of PM attributes.
pget/lpget Read PM attribute(s) from MO(s).
pgets[mn] Print scanner contents.
pme[fd][cgu] Fetch/decode event ROP files (RNC/RBS only).
pmom[acd]/lmom[c] Print description of PM counters (pmom).
pmr[agf] Produce PM KPI reports.
pmx[hfdnc] Display counter values.
Pst List all PM scanners and their state.
spget/lspget Read PM attribute(s) from MO(s) one by one (slow pget/lspget)

Admin commands

!/l Execute a unix command on the PC/workstation.

alias/unalias Print or define command aliases.
bo[ar]/ba[swdp]/br[wd]/bp Manage board groups.
Col Toggle display of colors.
conf[bld] Toggle confirmation on various MO commands.
Edit Edit a file on the Network Element.
fclean[f|ff|d|e] Removal of obsolete loadmodules on the Network Element.
Ftdel Delete files/folders over ftp.
ftget[c]/ftput[c] Transfer files or directories to/from the Network Element, using ftp.

Ftree Recursive listing on the Network Element's file system.

gs/gsg Toggle display of old/new attribute value in set/bl/deb.
h2b/b2h Convert a binary to hexadecimal or viceversa.
h2d/d2h Convert an integer to hexadecimal or viceversa.
Hi Print history of amos commands entered.
Htget Transfer files from the Network Element using http.
ip2d/d2ip Convert an IP address into the format used in the fRO.
l+[m][m][s][o]/l-/l? Open/close amos logfiles.
Lh Run COLI commands on all boards of a board group.
lmid[c] Print translation of loadmodule product number.
mon/mon+/mon-/mon? Start/stop/check the target monitor server on the.
ose/coli command Send a COLI command to the Network Element's OSE shell.
p/w/pw/b Change amos prompt and/or window title.
pgu[c][f][r] Program Upgrade. For STP use only, eg, to load black LMs.
Print Print a line or variable (scripting).
Progkill Restart a program on a board or board group
proglist[e] List programs on a board or board group
Prox Toggle display of proxy identities in printout.
Pv Print scripting variables.
q/bye/exit/quit Exit amos.
Return Exit from a command file without exiting from amos.
Smd Server maintenance, disk usage reduction.
ul Toggle display of userlabel in st/lst and pget/lpget.
upid[m] To upgrade package product number or T&E error codes
uv Print or change amos configuration settings.
wait Specify a delay in hrs, mins, secs, or rops.