About Us

We, Soundwel Technology Co., Ltd, are professional manufacturer of NDT (Non-Destructive Testing)
instruments covering AE(Acoustic Emission) System and Ultrasonic Flaw Detector etc..
Our first multi-channel AE system, WAE98 which used PCI communication between computer and
acquisition boards, was developed in 1998. SAEU2S which applies USB2.0 communication between computer
and acquisition unit was presented on AEWG50 conference, California USA in 2007. SAEU2S is also the first
multi-channel USB AE system in the world. SAEW1 which applies Wi-Fi communication between data
acquisition units and computer was presented at AEWG-55 conference in USA in 2013. SAEW1 is the first
multi-channel Wi-Fi AE system in the world.
Except for our leading technology of AE system we also manufacture other NDT instruments such as
ultrasonic flaw detector, ultrasonic thickness gauge, coating thickness gauge, leeb hardness tester and
vibrometer, which are used by our customers in many countries.
Implementing ISO-9001 Quality Management System as the foundation of Quality System, Soundwel’s
Quality System is mature and reliable to meet current requirements and satisfy future needs for the customers
all over the world. Our products have been CE marked. Till now, Soundwel technology has produced
thousands of channels of acoustic emission instrument. They are successfully used in lab and field all over the
world, such as China, United States, the United Kingdom, Brazil, and Indonesia etc.

Company Milestones
 In 1998, WAE98, the first multi-channel acoustic emission system was developed
 In 2003, SDAES, multi-channel (FPGA technology) acoustic emission system was developed
 In 2006, SW4 Ultrasonic thickness meter was developed
 In June, 2007, SAEU2S, USB acoustic emission system was developed
 In June, 2008, SW5 Ultrasonic thickness meter was developed
 In September, 2008, SUFD Digital ultrasonic flaw detector was developed
 In May, 2009, PLDL-2 Pipeline leak detection and positioning system was developed
 In August, 2009, SISAE1 Intrinsically safe multi-channel acoustic emission system was developed
 In January, 2010, SW6 Ultrasonic thickness meter was developed
 In July, 2010, SW7 Ultrasonic thickness meter was developed
 In March, 2011, SAEC1 Acoustic emission standard signal generator was developed
 In May, 2011, SPAES-1 Portable acoustic emission detector was developed
 In August, 2011, SUB100 Digital ultrasonic flaw detector was developed
 In November, 2012, SUB200 Digital ultrasonic flaw detector was developed
 In March, 2013, SAEW1 Wireless acoustic emission system was developed
 In July, 2013, LHT series Leeb hardness tester was developed
 In October, 2013, TG-C series coating thickness gauge was developed
 In 2014, All series of AE system realized both LAN and WLAN connection
 SAEU2S Multi-channel Integrated Acoustic Emission System

The composition of SAEU2S Multi-channel

Integrated Acoustic Emission System
 Integrated acoustic emission system SAEU2S consists of sensors,
preamplifiers, acquisition unit and computer software.
 Multiple acquisition cards are integrated into the acquisition unit.
Two independent channels per acquisition card, four types of the
card: 40MHz18bit, 10MHz16bit, 5 MHz16bit and 3 MHz16bit
according to maximum sample rate and sample accuracy.
 Acquisition and analysis software for PC can be installed on any
types of computers, laptop/desktop/server.

The variety communication methods of SAEU2S

between computer and data acquisition unit
 USB 2.0 / 3.0 cable(2m length about) connect
 USB extended cable connect, the cable can be
100 meters
 Wi-Fi wireless network and wired Ethernet, the
communication distance is up to 100 meters.
Plus switch and optical fiber the distance can be
more than 40 km. Plus big power wireless
switch the wireless distance can be up 10km
 The client computer can control remote service
computers which connect acquisition unit via
internet, no limited distance.

Model and configuration of SAEU2S

Multi-channel Integrated Acoustic Emission
 There are four host(data acquisition unit) types, 2-channel host, 10-channel host, 20-channel host and 30-
channel host. Two or more hosts can be cascaded a super-system with up to 200 AE channels.
 SAEU2S-AB-C is the unit model, A is sample rate, B is sample accuracy, and C is channel number. For
example, model SAEU2S-1016-30 is that acoustic emission system SAEU2S with 30 channels, 10MHz
sample rate and 16 bit sample accuracy.
 Sensor and preamplifier are all suggested optional components. Other optional components include unit
signal cable, sensor signal cable, magnetism holder, batteries package of DC power supply, PC, couplant
and pencil etc.

Soundwel Technology Co., Ltd www.soundwel.cn -1-

 SAEU2S Multi-channel Integrated Acoustic Emission System
Main performance features of SAEU2S Multi-channel
Integrated Acoustic Emission System
High transferring rate of AE hit data
The signal data processing speed of acoustic emission system is
limited by communication speed between the acquisition card and
computer. When SAEU2S acoustic emission unit uploading the
data to computer via USB 2.0 interface, it exclusives the bandwidth
of USB data channel, therefore the real transferring rate is near to
the theory value 48MB/s. At present, our real transferring rate is up
to 30MB/s and hit number is more than 400,000hits/sec. It means
a 2-channel unit of 5MB/s sampling rate and 16 bit accuracy can
continuously upload continuous waveform data for 24 hours a day.
Hardware real-time continuous frequency filter
The acquisition card realizes real time and continuous digital
filtering for acoustic emission waveform data and reconstructs new
waveform data after filtering. Then it produces acoustic emission
hit features from reconstruction waveform data. Digital filter can
be set any frequency window as you need such as 100-150 kHz or
120-140 kHz. Band-pass, band-stop, high-pass, and low-pass can
be selected, and can be started at the same time for all channels.

Hardware real-time FFT analysis

Acquisition card processes original waveform via FFT analysis
getting frequency domain waveform. Both original time domain
power spectrum waveform and frequency domain waveform can
be real-time and continually uploaded to computer and display on
computer screen as shown on left figure for better real time data
identification.

Long waveform sampling length

When you choose 16 bit sampling accuracy, the maximum waveform sampling points is up to 128k points. When
using 5MHz sampling rate, the sampling length is 26ms. Some multi-channel acquisition needs to acquire waveform
at the same time, but the transferring rate is too low to acquire continuous waveform. 26ms sampling length is enough
for completely recording the waveform of large events.

Architecture design is easy to use

 Multi-unit cascading can create a united system, and every unit also can work alone. You can change high
performance computer to improve the whole property of the acquisition system at any time. The system property
enhancement is no longer constrained by computer.
 The unit communicates with computer by using USB 2.0/3.0 interface. Or you can choose USB extension cable
to connect; the effective distance is up to 100 meters. Wi-Fi wireless network and wired Ethernet’s effective
distance is up to 100 meters. Through the optical fiber can prolong the distance between the host and the computer
to more than 40 km. The client computer can control remote service computers and host anywhere in the world
via the Internet.
 The software support operating system Windows7 and Windows8. It can be setup on multi computers, the user
number is not limited, convenient to share acquired data for analysis.

-2- Soundwel Technology Co., Ltd www.soundwel.cn

 SAEU2S Multi-channel Integrated Acoustic Emission System
Specifications of SAEU2S Multi-channel Integrated Acoustic Emission System
 Communication: The unit communicates with computer via USB2.0, USB extension cable, Wi-Fi, LAN,
optical fiber and even the Internet.
 Multi-unit cascading: User can set the number of each acquisition unit. Multi-unit cascading can create a
united system, and every unit also can work alone.
 Architecture： Unit is separated with computer, and the distance between them could be more than 100km.
You can change high performance computer to improve the whole property of the acquisition system at any
time.
 Acquisition card control: To multi-channel host, acquisition cards are fixed on main board. Operation and
time synchronization of each card are controlled by main board.
 Processing of AE signal: Each acquisition card can extract AE hit data. The threshold of waveform and
parameter can be set respectively.
 Features Transferring Rate: Real-time continuous AE hit features transferring rate is over 400,000hits/sec
(USB).
 Waveform Transferring Rate: Real-time continuous AE waveform transferring rate is over 30MB/sec
(USB).
 Hardware Digital Filter: ignore, high-pass, low-pass, band-pass and band-stop can be set at any frequency at
range of 0kHz~3MHz. The continuous waveform is reconstructed after digital filtering, and then produce
acoustic emission hit features on reconstructed waveform.
 Hardware real-time FFT analysis: Acquisition card get FFT frequency domain waveform and output it
together with power spectrum waveform.
 Waveform sampling length: The waveform sampling length can reach 128k points for each channel at the
same time.
 Waveform acquisition before/after trigger: The acquisition point is up to 128K before trigger.
 Continuous waveform: Can ensure that a 2-channel unit of 5MB/s sampling rate and 16 bit accuracy
continuously uploads continuous waveform data for 24 hours no stop acquisition.
 AE channel: Each card contains 2 channels, and one system can extend to 200 channels at most.
 Analog parameter input channel: Every acquisition card contains 4 parameter input channels. One system
can support 12 parameter input channels at most.
 Sampling Rate/Sampling Resolution: 40M18bit, 20M18bit, 10M16bit, 5M16bit and 3M16bit are optional
 Signal Input Range: ±10V
 Signal Conditioner: The board gain of each channel is adjustable, 0dB, -6dB, -9.5dB are optional,
corresponding the signal input voltage range ±10V, ±5V, ±3.3V.
 Auto sensor testing: Built-in AST function which is used for launching the acoustic emission signal for
testing.
 Frequency Respond: 1kHz～2.5MHz(±3dB)
 Analog Filter: low-pass (100kHz, 400kHz, 1200kHz) and high-pass (20kHz, 100kHz, 400kHz), user can
choose various combinations through software.
 Unit noise: ﹤10dB (No-Load)
 Maximum signal amplitude: 100dB（Using 40dB pre-amplifier）
 Dynamic Range: 90dB
 AE Hit features: Time of First Threshold Crossing, Time of Peak, Peak Amplitude, Counts, Duration, Energy,
Counts to Peak, Rise Time, RMS, ASL, Parametric 1-12, Centroid frequency and Power Spectrum Parametric
1-5.
 Parametric Sample Resolution: 12bit or 16bit
 Parametric Sample Rate: 32K points/s
 Parametric Input Voltage: ±10V, Parametric physical units can be set through software.
 Alarm output: The unit outputs alarm control signal by using switching value.
 Operating Temperature: -10℃～﹢45℃

Soundwel Technology Co., Ltd www.soundwel.cn -3-

 SAEW2 Multi-channel Distributed Acoustic Emission System

Overview of SAEW2 Multi-channel Distributed

Acoustic Emission System
SAEW2 Multi-channel Distributed Acoustic Emission System is
built with multiple single-channel acquisition units and computer.
This system evolved from Wireless Acoustic Emission Testing
Instrument of our company. The connection between multiple
independent AE signal acquisition unit and computer is established
by using wired or wireless network switches and remote Wi-Fi or
LAN. Every unit acquires according to the PC software settings,
and acquired data will be uploaded back to PC. Time
synchronization among each unit is realized by GPS time.
Applications of SAEW2 Multi-channel
Distributed Acoustic Emission System
 Suitable for acoustic emission real time detection which is
hard for wiring, such as high and steep slope, viaduct and
large hydropower reservoir etc.
 Suitable for acoustic emission testing, in which wiring
cannot be used, such as large rotating equipment, roller
coaster and ferris wheel, etc.
 Applicable to high voltage equipment testing to ensure the
operator and computer is electrical isolated with units.
 SAEW2 obtained CE certification, suitable for the occasion
with requirements of electromagnetic compatibility.

Main performance features of SAEW2 Multi-

channel Distributed Acoustic Emission System
 Wireless transmitting distance is up to 100m, 10km
when using long-distance Wi-Fi unit and 100km when
using optical Ethernet connection.
 Time synchronization among each unit is realized by
Field application GPS time, synchronous accuracy is better than 30us，
time difference locate error is less than 0.1m.
 By using Wi-Fi communication, waveform
transmitting rate is up to 2MBps, 20,000hits/s, can
satisfy the requirement of the 64 channel positioning.
 Multiple units real-timely transmit data. The data in
same group upload in time to realize time-difference
localization.
 The acquisition card realizes the functions of real time
digital filter, wave reconstruction and parameter
extraction after filter, etc.
 Other functions are familiar to SAEU2S Multi-channel
Integrated Acoustic Emission System, and the software
Software of SAEW2 is same as the one of SAEU2S.
SAEW2
-4- Multi-channel Distributed
Soundwel Acoustic
Technology Co., Ltd Emission System
www.soundwel.cn
SAEW2 Multi-channel Distributed Acoustic Emission System

Network modes of SAEW2 Multi-channel Distributed Acoustic Emission System

 The connecting mode is optional, user can choose from complete wireless mode or
complete wired Ethernet mode, even wireless and wired mixed mode.
 The system can be directly connected into other network to establish a larger acoustic
emission network system.
 There is no center in the network, so that, a single unit’s error will not affect the entire
network.
GPS Time

GPS Time
GPS Satellite
GPS Time

Acquisition
Unit 64 LAN
LAN 100M WiFi
100M
Acquisition (10Km)
Unit 2 LAN

WiFi
(200m) LAN
Acquisition
Unit 1 100M
Long-distance Long-distance
Switch
WiFi Unit WiFi Unit LAN

Switch

Optical Cable Optical

100kM transceiver
WiFi LAN
(200m)

Optical
Switch
transceiver

Computer

Wired and wireless mixed network diagram

Specifications of SAEW2 Multi-channel Distributed Acoustic Emission System

 Channels: each unit has one AE channel and one parametric channel; the units can construct a large system
with 64 channels at most.
 Synchronization accuracy by GPS: 30us
 Wireless protocols: Wi-Fi 802.11 b/g （unit）
， 802.11 n （remote Wi-Fi module）
 Transmitting Rate: 2MB/s or 30,000hits/s
 Wireless Transmitting Distance: 200m（by unit）, 10000m（by remote Wi-Fi module）
 Acoustic emission signal process: unit contains real time AE Hit extraction function
 Waveform: Real-time uploading acoustic emission waveform, waveform threshold can be set, sampling
length is 4k sampling points
 Signal Frequency: 1kHz~1.6MHz
 Sample Rate/Resolution: 10M16bit、5M16bit、3M16bit are optional
 Dynamic Range: ≥70dB
 Noise: ≤30dB
 Built-in pre-amplifier: 40dB
 Hardware digital filter: Ignore, High-pass, Low-Pass, Band-pass and Reject filter can be set arbitrarily
frequency numerical value from 0kHz-3MHz
 Analog filter: Low-pass(100kHz, 400kHz, 1200kHz), High-pass(20kHz, 100kHz, 400kHz)
 AE signal input range: ±100mV
 Parametric Input Voltage: ±10V
 Unit size: 170mm×120mm×40mm
 Unit weight: 0.6kg
 Operating Temperature: -10℃~﹢45℃
 Power supply: 9v to 12v DC power supply, battery life is about 8 hours
SAEW2 Multi-channel Distributed Acoustic
Soundwel Technology Co., Ltd
Emission System
www.soundwel.cn -5-
 SAE Acoustic Emission Analysis Software

Main features of SAE Acoustic Emission Analysis Software

 Support operating system Windows 7 and Windows
8 in common use
 Can be installed on several computers, the user
number is unlimited, convenient for sharing data
analysis.
 Customized software and characteristic parameters
for special use
 Provide drive and dynamic libraries to user,
convenient for secondary development
 Hit Parameter, waveform and external parameter real-
time acquisition, analysis, display and storage.
 Multiple graph groups can be set; one group can display
multi different graphs. A set of data analysis results can
be real-time displayed in all graphs of all graph groups.
 Acquisition settings can be saved, convenient for replay
and analysis.

 Linear/Planner/Cylinder/Sphere/Cube/Solid
Cylinder/Bottom tank location.
 Different positioning calculation may be done at the
same time. User can choose any needed channels to
participate in position calculation
 Auto place or manual place the sensors during
location

 Any AE acquisition card can be on/off on demand.

 Waveform generation condition as sampling rate,
sampling length can be set.
 Parameter generation condition as HDT, HLT, PDT
can be set.
 Sampling rate, sampling length, wave threshold, hit
data threshold, analog filter, pre-sample/post sample
length can be set on each channel

 Frequency range can be set arbitrarily on digital

filter, Band-pass, Band-stop, High-pass, Low-pass
are selectable.
 Digital filter combine with analog filter, filter stop-
band attenuation reinforces filtering effect. Filter of
each channel can be set alone.

-6- Soundwel Technology Co., Ltd www.soundwel.cn

SAE Acoustic Emission Analysis Software

 The two axis of correlation graph can be  All hit parameter lines corresponding to the location points
set by user, a variety of statistical in the circle for example AS1 will be displayed on a new
models are optional. Variables of Y axis hit data graph auto generated as you choose AS1 by mouse.
can be multiple. Further corresponding waveform will be displayed on
another new graph when you choose hit line on the hit data
graph. You can have three corresponding graphs: location
as above, hit lines and waveform..

 Hit parameter filter can be set for multi-hit parameters and any
values filtering windows as shown by left figure.
 Real-time hit parameter filtering during acquisition or filtering
during data replay can be set as shown in left figure.
 Alarm also can be enabled for the filter applied. Any hit out of
filtering windows will be alarmed causing your attention.

 FFT analysis and wavelet analysis

during replay.
 Powerful neural network pattern
recognition for three kinds of input data:
time domain waveform, frequency
domain waveform and hit parameter.
 Software frequency filtering when
replay waveform data.

 Up to 8 sensors in each customized group, to realize

multi-sensor compound location.
 Location calibration adjusts sound velocity by fitting the actual
sound source coordinates and testing location coordinates.

 Save waveform and AE hit data independently, convenient to replay separately or together.
 Remote control through internet, you can do training and operating the AE system far from the system.
 File format can be converted into txt and excel. User can choose to convert current frame, entire file, or
even multi-file batch according to data converting settings.

Soundwel Technology Co., Ltd www.soundwel.cn -7-

SPAES-1 Portable AE System/Valve Leak Detector/Fault Diagonosis

Main features of SPAES-1 Portable AE System

 Continuous real-time hardware AE hit feature parameters
extraction and powerful hardware signal processing capability.
 Battery power supply, single hand hold, suitable for mobile
testing.
 You can choose built-in pre-amplifier or external preamplifier.
The instrument can offer power supply to external pre-amplifier.
 Powerful and flexible real time digital filter and program setting
analog filter same as our SAEU2S are useful for noise filtering.
 Touch screen shows rich contents and easy to operate.
 Strong instrument shell and waterproof plug interface, suitable
for fast and efficient field detection.

 Real-time hit parameter table, waveform, FFT

spectrum and correlation graph display
 Valve leakage detection: User can choose ASL,
RMS or both of them as criteria parameter for
leakage detection.
 Fault diagnosis: user can set 3 values as criteria for
3 types of hit parameters for real time fault
diagnosis.
 Acquired data can be uploaded to computer for
further analysis.

Specifications of SPAES-1 Portable AE System

 AE input: single-channel Operation Interface
 Sampling frequency: 10MHz
 Sampling accuracy: 16bit
 Signal frequency: 1 KHz ~ 1MHz
 Sample length: 4,000 points (maximum)
 Dynamic range: > 70dB
 Digital signal processing: hit data extracting, frequency
filtering and others.
 Analogy filter: 3 high-pass, 3 low-pass, multi-combination
can be set by software.
 Data Interface: USB2.0 interface and Flash memory card
socket
 External parameters: single-channel, 100 KHz; sampling
frequency, 16bit; sampling accuracy, ± 10V input range
Field Application
 Screen: Color LCD touch, 5.7 ", 640, 480 pixels
 Battery: Lithium battery, 8 hours continuous work
 Weight: ≤ 1.13Kg (with battery)

-8- Soundwel Technology Co., Ltd www.soundwel.cn

 SISAE1 Intrinsically Safe Acoustic Emission System

Overview of SISAE1 Intrinsically Safe Main features of SISAE1 Intrinsically

Acoustic Emission System Safe Acoustic Emission System
Intrinsically safe acoustic emission system  Acquisition unit works in hazardous area without PC.
meets the national standards of China  Built-in 26dB pre-amplifier and analog filter
(GB3836.4-2000), suitable for working in
hazardous environments such as oil tank bottom  High-capacity CF card storage. The CF card is
detection, coal mine monitoring equipments, changeable in safe area.
etc.  Time synchronization is realized by using synchronous
line between acquisition units.
 Acquisition unit contains operation and display
interface, acquisition process and status can be directly
controlled and displayed.
 Threshold is optional.
 Multiple single channel acquisition units can be
cascaded into a multi-channel system
 Acquired data can be uploaded to PC and can be
analyzed by SAE software for a further study.
 Multi-channel synchronous data is generated by PC
after acquisition for time-difference localization..

Sensor Sensor Sensor Sensor

Terminating
Resistor

Master Slave 1 Slave 2 Slave 3

Specifications of SISAE1 Intrinsically Safe Acoustic Emission System

 Explosive-proof grade: Ex ia II A-T4 Ga  Working hour：more than 4 hours（continuous）
 Sampling Rate/Sampling Resolution: 1MHz/16bit  Power supply: Lithium battery and external DC
charging in safe area.
 Sampling Length: 8~16k
 Noise/Dynamic range: 30dB/70dB(0dB=1uv)  Storage: 8G CF card（Standard）

 Frequency: 3KHz～500KHz  Operating temperature: 0℃～﹢40℃

 Protection grade: IP54
 AE signal input range: ±100mv(100dB)
 Data Interface: USB2.0 interface and Flash
memory card

Soundwel Technology Co., Ltd www.soundwel.cn -9-

SAEC1 AE Signal Generator

Overview of SAEC1 AE Signal Generator

SAEC1 AE Signal Generator is used for generating
standard AE signals to calibrate the characteristic
parameters of acoustic emission instruments, such as
amplitude, frequency, rise time, counts, duration, energy,
etc. SAEC1 can be used in fast calibration of AE system,
sensor and preamplifier testing measurement in field.

Main features of SAEC1 AE Signal Generator

 Setup and testing result displayed on one LCD screen, intuitive and convenient,
easy to operate
 Automatically open the previous settings when you turn on the instrument.
 Rechargeable lithium batteries power supply
 Seven calibration acoustic emission signal: Dual-exponential envelope and
triangular envelope with fixed rising time and decay time, four kinds of pulse sine
waveform and continuous waveform.
 Outputs signals at four frequencies: 30kHz, 60kHz, 150kHz and 300kHz
 Nine different amplitudes: 30dB, 40dB, 50dB, 54dB, 60dB, 70dB, 78dB, 80dB,
90dB
 Four different signal output rates: 1pps, 10pps, 100pps and manual trigger
 Three kinds of testing gain: 0dB, 26dB and 40dB

PAI Preamplifier
 Gain: 40dB
 Bandwidth(-3dB): 10kHz～2.0MHz
 Noise: ＜28dB(with sensor)
 Output Voltage: ±10V (Vpp)
 Power Required: 28V DC phantom power supply
 Rated Load: 50Ω
 Protection grade: IP65
 Built-in magnetic holder
PAV Preamplifier  Automatic sensor testing function

 Gain: 20dB /40dB /60dB are optional.

 Bandwidth: 1kHz~1.5MHz (Without filter)
 Noise: ＜28dB(with sensor)

 Input: single-ended and differential modes are

optional
 Power Required: DC28V supplied by AE cable or
power jack
 Output Voltage: ±20V (Vpp)
 Built-in Filter: 15-1200 kHz, 100-400 kHz, etc. are
selectable
 Automatic sensor testing function

-10- Soundwel Technology Co., Ltd www.soundwel.cn

 Sensors

Main features of Sensors

 Complete range of AE sensors, covering all kinds of frequency
band, working temperature and size.
 High sensitivity, good consistency, each sensor are strictly tested
before delivery
 The working temperature is up to 600℃, the sensitivity in high
temperature and room temperature is nearly the same.
 Contains the model with built-in magnetic holder or water-proof for
special using.
 Our engineer may design customized special sensors at any time
according to user need.

SR10 SRI40
SR150M SRI150
SR150
N

Type Sensor model

SR40M
Universal sensor SR150M，SR150N，SR40M，G8
Built-in magnetic holder sensor SR150A
Micro sensor SR150S，MG50
SR150S
Waterproof sensor CG12，CG15，CG50，CG80
SR150A
Ultra-low frequency sensor SR10，SR10B
Wideband sensor WG50，SR800
Built-in preamplifier sensor SRI150，SRI40，BF40
Differential output sensor DG15
High temperature sensor HG15c
Middle-high temperature sensor HG15b
Accessories
Magnetic holder Couplant Signal cable

Magnetic holders are used for fixing sensor High temperature resistant paste. Interference resistant, low
on the surface of ferromagnetism material to Working temperature: -35~235℃ noise, is used to connect the
be tested. Type of magnetic holder is based sensor and preamplifier
on the sensor you chose.

It is used to transmit the

It is used to generate signal of preamplifier to
standard beak-lead signal. acquisition card. The length
can be selected from 1
Pencil and guide ring meter to 100 meters.
AE cable

Soundwel Technology Co., Ltd www.soundwel.cn -11-

 Applications
Studying in acoustic emission detector for more than 10 years, our acoustic emission products are widely used in
petroleum, chemical, aerospace, aviation, railway, mining, electricity, machinery, metallurgy, scientific research,
schools and other industries. Our products received wide acclaim from more than one thousand domestic and
foreign customers.

High pressure Petrochemical synthetic High pressure hydrogen High pressure

spherical tank test tower detection storage tank detection column tank test

Long tube trailer gas Atmospheric tank bottom Pipeline and valve leak Cast iron drying
cylinders detection detection detection cylinder detection

Spacesuit helmet Airplane wings fatigue Wind power equipment Magnetic incentive
stress testing test fault monitoring residual stress testing

High voltage power transformer Wheel rolling bearing High voltage terminal Material damage
partial discharge detection damage detection crimping process detection detection in forging

Gear shaft straightening process Milling machine Grinding machine Blast furnace top gearbox
material damage detection processing detection processing detection tilting mechanism detection

Steel rolling equipment Surface roughness Well blowout Rock and concrete stress
gearbox fault diagnosis detection preventer test experiment

Space debris high-speed Metal tensile test Lifting equipment Wind tunnel equipment
particle collision detection monitoring testing monitoring

-12- Soundwel Technology Co., Ltd www.soundwel.cn

Service and Consultation

 Analyze your requirement before purchasing to choose suitable products for you
 Regularly release new software version for free updating
 Scientific research project cooperation and special function of products customization
 Our senior AE experts can provide various application service
 Detection scheme design, data analysis and test result judgment
 Product after-sale application technical training, on-site testing technology training
 Can provide users with spare machine during maintenance

Conferences and Trade Shows

 In September, 2007, attended MICONEX 2007 as exhibiting company

 In October, 2007, attended 6th WCAE and AEWG-50 as exhibiting company, presented the world’s first
USB 2.0 acoustic emission system-SAEU2S , in California
 In October, 2008, attended AEWG-51 and WCAE-2008
 In October, 2008, attended 17th WCNDT as exhibiting company, in Shanghai
 In November, 2008, attended MICONEX 2008 as exhibiting company, in Beijing
 In November, 2009, attended the 2009 ASNT Fall Conference and Quality Testing Show in America
 In November, 2010, attended 29th EWGAE and 7th WCAE as exhibiting company
 In November, 2010, attended the 2010 ASNT Fall Conference and Quality Testing Show in America
 In May, 2011, attended AEWG-53 as exhibiting company in America
 In November, 2011, the 2011 ASNT Fall Conference and Quality Testing Show in America
 In April, 2012, attended 18th WCNDT in Durban, South Africa.
 In May, 2012, attended International NDT Equipment Exhibition in Beijing
 In March 26, 2013, attended NDT 2013 in Moscow, Russia
 In June 11, 2013, attended AEWG-55, presented the world's first Wi-Fi wireless acoustic emission
detection system with high pass rate and long communication distance
 In July 25, 2013, SUB200 Digital ultrasonic flaw detector was selected as training and testing instrument
for NDT examination in China
 In November 18, 2013, attended the APCNDT 2013 conference in India
 In October 30, 2013 attended 18th Q.C.CHINA Conference in Shanghai
 In May, 2014, the host of AEWG-56 in Salt Lake City, U.S.A.