Scribd
Upload
109 views5 pages

Baseplate PF1

The document summarizes the design of a base plate for a column. Key inputs include an axial load of 31.646 kN, maximum moment of 28.605 kN.m, and maximum shear of 27 kN. The base plate is 250x250mm with 50mm projections. Calculations are shown to check the required base plate thickness and design anchor bolts. The required bolt diameter is determined to be 20mm to satisfy strength requirements.

Uploaded by

VINAYAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
109 views5 pages

Baseplate PF1

The document summarizes the design of a base plate for a column. Key inputs include an axial load of 31.646 kN, maximum moment of 28.605 kN.m, and maximum shear of 27 kN. The base plate is 250x250mm with 50mm projections. Calculations are shown to check the required base plate thickness and design anchor bolts. The required bolt diameter is determined to be 20mm to satisfy strength requirements.

Uploaded by

VINAYAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

DESIGN OF BASE PLATE :

INPUTS:

Axial Load = 31.646 kN = 31646 N


Max. Moment = 28.605 kN.m = 28605000 N.mm
Max. Shear = 27 kN = 27000 N

Grade of Concrete, fck = 35 N/mm2

Base plate Length = 250 mm


Base plate Width = 250 mm

Larger Projection, a = 50 mm
Larger Projection, b = 50 mm

Column Flange
thickness tf
= 10 mm
No of Bolts Single side = 3 Nos
End distance of Bolt = 25 mm

Use of M 35 Concrete ,Bearing Strength : (Cl: 7.4.1 of IS:800 -2007)

= 0.6* fck
= 21 Mpa
CALCULATIONS :

Max.Intensity of Pressure :

W.max = (P/A)+(M/Z)

= 0.506 + 10.984

= 11.491 Mpa

Thickness of Base plate: (Cl: 7.4.3.1 of IS:800 -2007)

ts = √ 2. 5 w(a 2−0 .3 b 2 ))γ mo/fy ) > tf

= 14.873 > 10
=
= THK. is O.K
ANCHOR BOLT DESIGN :

= (P/A)-(M/Z)

= -10.478 Mpa

Point of contrflexure ,X = 119.238 mm

X1 = 43.587 mm
X2 = 81.413 mm

ȳ = 181.413 mm

Tension = 143.477 kN

Tension per Bolt = 47.826 kN

Design Strength = Agfy/¥mo (Cl: 6.2 of IS:800 -2007)

Ag = 210.434 Sq.mm

Min Diameter of Bolt = 16.373 mm

ENTER THE DIAMETER OF THE BOLT = 20.000


Rupture Strength : (Cl: 6.3.2 of IS:800 -2007)
= 0.9Anfu/¥ml
= 73.266

= Dia of Bolt is O.K

Combined Shear & Tension :

Shear Force per Bolt,Vsb = 4.500 kN


Tension per Bolt,Tb = 47.826 kN

Shear strength of Bolt Vdb= 45.600 kN (Cl: 10.3.3 of IS:800 -2007)


Tension Capcity of Bolt Tdb= 68.400 ONLY FOR Cl -4.6 BOLTLS

Combined Shear & Tension = (Vsb/Vdb)^2+(Tb/Tdb)^2 < 1.0


(Cl: 10.3.6 of IS:800 -2007)
= 0.499
Dia of Bolt is O.K

length of bolt= 634.631


Point of contrflexure :

11.49066 = 2619.496 -10.47798

21.96864 = 2619.496

x = 119.2379683

You might also like