Datasheet: uni M-QNB NS

EN

Plastic Modular Belt

Series uni M-QNB Type NS
Straight running belt
P Nominal pitch: 12.7 mm (0.50 in)
Surface type: Flat
Surface opening: Closed

STANDARD
T Backflex radius: 20.0 mm (0.80 in)
n L Pin diameter: 5.0 mm (0.20 in)
ectio
dir
ing
nn
Ru

Belt material mm in mm in
& color POM-SLF B PE B
P 12.7 0.50 T 8.8 0.35
(Nominal)
Pin material
& color PP B PE N
L 4.4 0.17 - - -

STRAIGHT RUNNING
Non standard material and color: See uni Material and Color Overview.

Alternative pin and lock materials: Lockpin: PBT LG PA6.6 N D PP B PE N

Permissible tensile force Belt weight Number of wear strips

(Belt/pin material) (Belt/pin material) *Min. No. (Min. No.)
Belt width drive
POM-SLF/PP PE/PE POM-SLF/PP PE/PE sprocket **Carry **Return
per shaft (pcs) (pcs)
mm in N lbf N lbf kg/m lb/ft kg/m lb/ft

77 3.0 1463 329 616 138 0.6 0.42 0.5 0.31 2 2 2

153 6.0 2907 653 1224 275 1.3 0.84 0.9 0.61 2 2 2

229 9.0 4351 978 1832 412 1.9 1.26 1.4 0.91 3 2 2

PITCH 12.7 MM/0.50 IN

305 12.0 5795 1303 2440 549 2.5 1.68 1.8 1.21 4 3 2

382 15.0 7258 1632 3056 687 3.1 2.11 2.3 1.51 4 3 2

458 18.0 8702 1956 3664 824 3.8 2.52 2.7 1.82 5 4 2

534 21.0 10146 2281 4272 960 4.4 2.94 3.2 2.12 6 4 2

610 24.0 11590 2605 4880 1097 5.0 3.36 3.6 2.42 7 5 3

687 27.0 13053 2934 5496 1236 5.6 3.79 4.1 2.72 7 5 3

763 30.0 14497 3259 6104 1372 6.3 4.20 4.5 3.03 8 6 3

839 33.0 15941 3584 6712 1509 6.9 4.62 5.0 3.33 9 6 3

915 36.0 17385 3908 7320 1646 7.5 5.04 5.4 3.63 10 7 4

992 39.1 18848 4237 7936 1784 8.1 5.47 5.9 3.93 10 7 4
Additional standard belt widths are available in steps of 76.3 mm (3.00 in.) Additional non-standard belt widths are available in steps of 38.1 mm (1.50 in.)

1983 78.1 37677 8470 15864 3566 16.3 10.93 11.7 7.86 20 14 7
Additional standard belt widths are available in steps of 76.3 mm (3.00 in.) Additional non-standard belt widths are available in steps of 38.1 mm (1.50 in.)

2974 117.1 56506 12703 23792 5348 24.4 16.39 17.5 11.79 30 20 10

General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request.
*Max. Load per Drive Sprocket. Belt material: POM-SLF 1000 N (225 lbf), PE 800 N (180 lbf)
**Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in)
= Single Link
Datasheet: uni M-QNB NS

Sprocket

Double row/Two way

Single row/Two way

PA6 LG
A-dimen-
Bore size

diameter

diameter

diameter

B-dimen-

Machined PA6 N
Overall

Pitch-

Hub-

sion

sion
No. of teeth

0.75

1.00

1.25
1.50

2.50
0.78
0.98

1.18

1.57
2.36

3.54
in
Pilot bore

Molded
18.0
25.0

30.0

40.0
60.0

90.0
19.1

25.4

31.8
38.1

63.5
mm

mm in mm in mm in mm in mm in

Z10 x 41.3 1.63 41.1 1.62 28 1.10 15.2 0.60 25 0.98 x x

Z19 x 78.3 3.06 77.2 3.04 65 2.56 33.7 1.33 43 1.69 x x

Z28 x 114.9 4.52 113.4 4.46 65 2.56 52 2.05 61.1 2.41 x x

Z28 114.9 4.52 113.4 4.46 100 3.93 52 2.05 61.1 2.41 x x

Z38 x 155.5 6.12 153.8 6.06 75 2.95 72.2 2.84 81.3 3.20 x x

Non standard material

Molded sprocket Molded sprocket and color: See uni
Material and Color
Overview.

Nosebars Min. Dimensions

B
E mm in

C C 20.0 0.79
A
D D 4.0 0.16

E 41.6 1.64

Other sprocket sizes are available upon request.

Two-part sprocket are available upon request.
Round bores are always delivered with keyway.
Other bore sizes are available upon request.
uni Retainer Rings: See uni Retainer Ring data sheet
Width of tooth = 7.0 mm (0.28 in)
Width of sprocket = 20.0 mm (0.79 in)

Max load per sprocket shown does not take bore size into account.
Please also ensure that sufficient size shaft is chosen for corresponding load.

For correct sprocket position: See uni Assembly Instructions for uni M-QNB.
For more detailed sprocket information. contact Customer Service.
uni M-QNB NS/161220

Expert advice, quality solutions Ammeraal Beltech Modular A/S

Transmission Belts
Conveyor Belts

Seamless Belts

and local service Hjulmagervej 21

Modular Belts

Timing Belts

Fabrication

for all your belting needs DK-7100 Vejle

& service

www.ammeraalbeltech.com
T +45 7572 3100
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect F +45 7572 3348
use of the above stated information. This information replaces previous information. All activities performed and services rendered by [email protected]
Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. www.unichains.com