Datasheet: uni 815 Plus+ Single Hinge

EN

Slat Top Stainless Steel Chain

Series uni 815 Type Single Hinge
TRAVEL T
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:

STANDARD
W 150.0 mm (5.91 in)
Q G

Standard shipping lengths:

coils of 80 links
PD = 3.048 m (10.0 ft)
L
H

P E

E G H L P Q T PD

RUNNING
mm in mm in mm in mm in mm in mm in mm in mm in

6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06

STANDARD
Width (W) Weight Permissible Surface

STRAIGHT
Chain Pin
tensile strength
material material*
mm in kg/m lb/ft N/lbf Roughness Hardness

K325 82.6 3.25 2.65 1.78

K330 83.8 3.30 2.70 1.81

S420 35
(Special Work AISI 431
K400 101.6 4.00 3.00 2.02
hardened (Work hardened
3000 / 674 < 0.3 µm 30 HRC
Crome-nickel magnetic

PITCH 38.1 MM/1.50 IN

K450 114.3 4.50 3.30 2.22
ferriticc Stainless Steel)
Stainless Steel)
K600 152.4 6.00 4.20 2.82

K750 190.5 7.50 5.10 3.43

* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.

Accessories
Rubber Top
X
X Z X Y
Rubber
Width
material
mm in mm in mm in

K325 06 K 77.0 3.03 30.0 1.18 2.0 0.08

ZZ

K450 06 K 108.0 4.25 27.0 1.06 2.0 0.08

Non stock item. Contact Customer
Service for delivery time.
K600 06 K 146.0 5.75 30.0 1.18 2.0 0.08

YY K750 06 K 146.0 5.75 30.0 1.18 2.0 0.08

Datasheet: uni 815 Plus+ Single Hinge

Sprocket

Dimension A

Dimension B
Max. ø bore
Min. ø bore
diameter

diameter

diameter

Machined PA6 N
Overall

Molded Cast Iron

Molded PA6 LG
Pitch
No. of teeth

Hub
mm in mm in mm in mm in mm in mm in mm in

Z13 82.0 3.22 79.0 3.11 20 0.8 40 1.6 n/a n/a 29.8 1.17 48.1 1.89 
Z19 117.3 4.62 117.0 4.61 20 0.8 40 1.6 58 2.28 58.7 2.31 64.5 2.54  
Z21 129.2 5.09 130.0 5.12 20 0.8 40 1.6 58 2.28 65 2.56 70.5 2.78  
Z23 141.2 5.56 142.0 5.59 20 0.8 40 1.6 58 2.28 71.2 2.80 76.5 3.01  
Z25 153.2 6.03 155.0 6.10 20 0.8 40 1.6 58 2.28 77.4 3.05 82.5 3.25  
Z27 165.2 6.50 167.0 6.57 20 0.8 70 2.8 n/a n/a 83.6 3.29 88.5 3.48  
Z29 177.2 6.98 179.0 7.05 20 0.8 70 2.8 n/a n/a 89.8 3.54 94.6 3.72  
Z31 189.3 7.45 192.0 7.56 20 0.8 70 2.8 n/a n/a 95.9 3.78 100.6 3.96  
Two part sprocket

Dimension A

Dimension B
Max. ø bore
Min. ø bore
diameter

diameter

diameter
Overall

Molded PA6 LG
Pitch
No. of teeth

Hub
mm in mm in mm in mm in mm in mm in mm in

Z19 117.3 4.62 117.0 4.61 20.0 0.79 40.0 1.57 58.0 2.28 58.7 2.31 64.5 2.54 
Z21 129.2 5.09 130.0 5.12 20.0 0.79 40.0 1.57 58.0 2.28 65.0 2.56 70.5 2.78 
Z23 141.2 5.56 142.0 5.59 20.0 0.79 40.0 1.57 58.0 2.28 71.2 2.80 76.5 3.01 
Z25 153.2 6.03 155.0 6.10 20.0 0.79 40.0 1.57 58.0 2.28 77.4 3.05 82.5 3.25 
Non standard material and color:
Molded sprocket Cast iron sprocket Machined sprocket Two part sprocket See uni Material and Color Overview.

uni 815 Plus + Single Hinge/160621

B Please ensure that sufficient size
shaft and keyway are chosen for
corresponding load.
A

Other sprocket sizes are available upon request

Width of tooth: 42.3 mm/1.67 in
Width of sprocket: 42.3 mm/1.67 in
uni Retainer Rings: See uni Retainer Ring data sheet
uni Idler: See uni Idler data sheet
uni Guide Rings can be mounted on cast iron and machined sprockets. See uni Guide Rings data sheet

Expert advice, quality solutions Ammeraal Beltech Modular A/S

Transmission Belts
Conveyor Belts

Seamless Belts

and local service Hjulmagervej 21

Modular Belts

Timing Belts

Fabrication

for all your belting needs DK-7100 Vejle

& service

www.ammeraalbeltech.com
T +45 7572 3100
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect F +45 7572 3348
use of the above stated information. This information replaces previous information. All activities performed and services rendered by [email protected]
Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. www.unichains.com