Panasonic SA-AKX10 (PN, PH) PDF

PSG1002034CE
CD Stereo System
Model No. SA-AKX10PH
SA-AKX10PN
Product Color: (K)...Black Type
Notes: This model’s CD Mechanism Unit is DLS6C. Please refer to the original service manual
(Order No. MD0803034CE) for this mechanism
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions----------------------------------------------- 3 2.2. Precaution of Laser Diode -------------------------------7
1.1. General Guidelines---------------------------------------- 3 2.3. Service caution based on Legal restrictions --------8
1.2. Before Use (For PH only)-------------------------------- 3 2.4. Handling Precautions for Traverse Unit --------------9
1.3. Caution For Fuse Replacement------------------------ 3 3 Service Navigation --------------------------------------------- 11
1.4. Before Repair and Adjustment ------------------------- 4 3.1. Service Information -------------------------------------- 11
1.5. Protection Circuitry ---------------------------------------- 4 4 Specifications ---------------------------------------------------- 12
1.6. Safety Parts Information --------------------------------- 4 5 Location of Controls and Components------------------ 13
2 Warning -------------------------------------------------------------- 6 5.1. Main Unit Key Button Operation---------------------- 13
2.1. Prevention of Electrostatic Discharge (ESD) 5.2. Remote Control Key Button Operation ------------- 14
to Electrostatic Sensitive (ES) Devices -------------- 6 5.3. Media Information---------------------------------------- 15
© Panasonic Corporation 2010. All rights reserved.

Unauthorized copying and distribution is a violation
of law.
6 Self-Diagnostic and Special Mode Setting ------------- 16 14 Simplified Block Diagram------------------------------------ 71
6.1. Cold-Start--------------------------------------------------- 16 14.1. Overall Simplified Block Diagram-------------------- 71
6.2. Doctor Mode Table--------------------------------------- 17 14.2. D-Amp Block Diagram---------------------------------- 72
6.3. Reliability Test Mode (CD Mechanism Unit 15 Block Diagram --------------------------------------------------- 73
(DLS6C)) --------------------------------------------------- 19 15.1. Servo/System Control ---------------------------------- 73
6.4. Self-Diagnostic Mode ----------------------------------- 20 15.2. Audio-------------------------------------------------------- 74
6.5. Self-Diagnostic Error Code Table -------------------- 21 15.3. Power Amplifier ------------------------------------------ 75
7 Troubleshooting Guide---------------------------------------- 22 15.4. Power Supply --------------------------------------------- 76
7.1. Troubleshooting Guide for F61 and/or F76 -------- 22 16 Wiring Diagram-------------------------------------------------- 77
7.2. Part Location ---------------------------------------------- 23 17 Schematic Diagram Notes ----------------------------------- 79
7.3. D-Amp IC Operation & Control ----------------------- 26 18 Schematic Diagram -------------------------------------------- 81
8 Service Fixture & Tools --------------------------------------- 28 18.1. CD Servo Circuit ----------------------------------------- 81
8.1. Service Tools and Equipment ------------------------- 28 18.2. Main Circuit------------------------------------------------ 82
9 Disassembly and Assembly Instructions --------------- 29 18.3. Panel Circuit ---------------------------------------------- 86
9.1. Disassembly Flow Chart-------------------------------- 30 18.4. CD Open Button, Remote Sensor & Tuner
9.2. Main Components and P.C.B. Locations ----------- 31 Circuit ------------------------------------------------------- 87
9.3. Disassembly of Top Cabinet--------------------------- 32 18.5. USB Circuit ------------------------------------------------ 88
9.4. Disassembly of Tuner P.C.B. -------------------------- 33 18.6. D-Amp Circuit--------------------------------------------- 89
9.5. Disassembly of Front Panel Assembly ------------- 33 18.7. SMPS Circuit---------------------------------------------- 90
9.6. Disassembly of Panel P.C.B. -------------------------- 35 18.8. Voltage Selector Circuit (For PH Only) ------------- 92
9.7. Disassembly of Remote Sensor P.C.B.------------- 36 19 Printed Circuit Board------------------------------------------ 93
9.8. Disassembly of CD Open Button P.C.B.------------ 37 19.1. CD Servo, Tuner & Voltage Selector P.C.B. ------ 93
9.9. Disassembly of USB P.C.B. --------------------------- 37 19.2. Main P.C.B.------------------------------------------------ 94
9.10. Disassembly of CD Lid---------------------------------- 38 19.3. Panel P.C.B.----------------------------------------------- 95
9.11. Disassembly of Main P.C.B. --------------------------- 39 19.4. CD Open Button, Remote Sensor, USB & D-
9.12. Replacement of Regulator IC (IC2701)------------- 40 Amp P.C.B. ------------------------------------------------ 96
9.13. Disassembly of D-Amp P.C.B. ------------------------ 41 19.5. SMPS P.C.B. (For PH only) --------------------------- 97
9.14. Replacement of Audio Digital Amp IC 19.6. SMPS P.C.B. (For PN only) --------------------------- 98
(IC5900) ---------------------------------------------------- 43 20 Terminal Function of ICs ------------------------------------- 99
9.15. Disassembly of SMPS P.C.B. ------------------------- 44 20.1. IC2801 (RFKWMAKX10PN): IC MICRO-
9.16. Replacement of Switching Regulator IC PROCESSOR -------------------------------------------- 99
(IC5701) ---------------------------------------------------- 46 20.2. IC6901(C0HBB0000057): IC FL Driver ------------ 99
9.17. Replacement of Rectifier Diode (D5702)----------- 47 21 Exploded View and Replacement Parts List---------- 101
9.18. Replacement of Regulator Diode (D5801)--------- 49 21.1. Exploded View and Mechanical replacement
9.19. Replacement of Regulator Diode (D5802)--------- 50 Part List --------------------------------------------------- 101
9.20. Replacement of Regulator Diode (D5803)--------- 51 21.2. Electrical Replacement Part List -------------------- 107
9.21. Disassembly of CD Mechanism Unit (DLS6C) --- 52
9.22. Disassembly of Rear Panel---------------------------- 54
9.23. Disassembly of Voltage Selector P.C.B. (For
PH only) ---------------------------------------------------- 55
9.24. Disassembly of CD Servo P.C.B.--------------------- 56
10 Replacement of Traverse Unit ------------------------------ 58
10.1. Disassembling Procedures ---------------------------- 58
10.2. Assembling Procedure---------------------------------- 59
11 Service Position ------------------------------------------------- 61
11.1. Checking and Repairing of Main P.C.B. ------------ 61
11.2. Checking and Repairing of D-Amp P.C.B. --------- 61
11.3. Checking and Repairing of Panel P.C.B. ----------- 61
11.4. Checking and Repairing of USB P.C.B. ------------ 62
11.5. Checking and Repairing of SMPS P.C.B. ---------- 62
12 Voltage & Waveform Chart ----------------------------------- 64
12.1. CD SERVO P.C.B. --------------------------------------- 64
12.2. Main P.C.B. (1/2) ----------------------------------------- 65
12.3. Main P.C.B. (2/2) ----------------------------------------- 66
12.4. Panel P.C.B. ----------------------------------------------- 66
12.5. USB P.C.B.------------------------------------------------- 67
12.6. D-Amp P.C.B. --------------------------------------------- 67
12.7. SMPS P.C.B. ---------------------------------------------- 68
12.8. Tuner P.C.B. ----------------------------------------------- 68
12.9. Waveform Table ------------------------------------------ 69
13 Illustration of ICs, Transistor and Diode ---------------- 70
2
1 Safety Precautions
1.1. General Guidelines
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.1.1. LEAKAGE CURRENT COLD CHECK

1. Unplug the AC cord and connect a jumper between the two prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the
chassis, the reading should be between 1MΩ and 5.2MΩ.
When the exposed metal does not have a return path to the chassis, the reading must be
1.1.2. LEAKAGE CURRENT HOT CHECK

1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a
good earth ground such as a water pipe, as shown in Figure 1.
3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.
4. Check each exposed metallic part, and measure the voltage at each point.
5. Reverse the AC plug in the AC outlet and repeat each of the above measurements.
6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent)
may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the
limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is
returned to the customer.
Figure 1
1.2. Before Use (For PH only)

Be sure to disconnect the mains cord before adjusting the voltage selector.
Use a minus(-) screwdriver to set the voltage selector (on the rear panel) to the voltage setting for the area in which the unit will be
used. (If the power supply in your area is 110V ~ 127V or 220V ~ 240V, set to the “110V ~ 127V or 220V ~ 240V” position.)
Note that this unit will be seriously damaged if this setting is not made correctly. (There is no voltage selector for some countries,
the correct voltage is already set.)
1.3. Caution For Fuse Replacement
3
1.4. Before Repair and Adjustment
Disconnect AC power to discharge unit AC Capacitors as such (C5701, C5703, C5704, C5705, C5706, C5707, C5708) through a
10 Ω, 10 W resistor to ground.
Caution:
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 120 V, 60 Hz in NO SIGNAL mode volume minimal should be ~ 500 mA. (PN)
Current consumption at AC 110~127 V / 220~240 V, 50/60 Hz in NO SIGNAL mode volume minimal should be ~ 500 mA. (PH)
1.5. Protection Circuitry

The protection circuitry may have operated if either of the following conditions are noticed:
• No sound is heard when the power is turned on.
• Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.6. Safety Parts Information

Safety Parts List:
There are special components used in this equipment which are important for safety.
These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design
without permission of manufacturer.
Safety Ref. No. Part No. Part Name & Description Remarks
6 REXX1030 1P RED WIRE (VOLTAGE-SMPS) PH
7 REXX1031 1P BLACK WIRE (VOLTAGE-SMPS) PH
13 RGRX1002A-A2 REAR PANEL PN
13 RGRX1002B-A2 REAR PANEL PH
37 RKMX1003-K TOP CABINET
401 RAEX0190Z-V TRAVERSE UNIT
A2 K2CB2CB00021 AC CORD PN
A2 K2CQ2CA00007 AC CORD PH
A3 RQTX1084-M O/I BOOK (En,SP)
A3 RQTX1085-M O/I BOOK (Sp) PH
A6 K2DAYYY00002 AC PLUG ADAPTER PH
PCB3 REPX0809A SMPS P.C.B. (RTL) PN
PCB3 REPX0809C SMPS P.C.B. (RTL) PH
PCB10 REPX0809C VOLTAGE SELECTOR P.C.B. (RTL) PH
DZ5701 ERZV10V511CS ZNR
S5701 K0ABCA000007 SW VOLTAGE SELECTOR PH
L5703 G0B612H00002 LINE FILTER
T5701 ETS39AG4M6AD MAIN TRANSFORMER PH
T5701 ETS39AG4NGAD MAIN TRANSFORMER PN
T5751 ETS19AB2E6AG SUB TRANSFORMER
T6101 G4DYA0000214 SWITCHING TRANSFORMER
PC5701 B3PBA0000402 PHOTO COUPLER
F1 K5D632BK0007 FUSE PH
F1 K5D802APA008 FUSE PN
TH5702 D4CAA2R20001 THERMISTOR
TH5860 D4CC11040013 THERMISTOR
TH5900 D4CC11040013 THERMISTOR
P5701 K2AA2B000011 AC INLET PH
P5701 K2AB2B000007 AC INLET PN
C5701 F0CAF334A105 0.33uF
C5703 F0CAF104A105 0.1uF PH
4
Safety Ref. No. Part No. Part Name & Description Remarks
C5703 F0CAF224A105 0.22uF PN
C5704 F1BAF1020020 1000pF
C5705 F1BAF1020020 1000pF
C5706 F1BAF1020020 1000pF PH
C5707 F1BAF1020020 1000pF PH
C5708 F1BAF1020020 1000pF
5
2 Warning
2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive
(ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec-
trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage
caused by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alumi-
num foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can
generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or compara-
ble conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
Caution:
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) suf-
ficient to damage an ES device).
6
2.2. Precaution of Laser Diode
Caution:
This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens.
Wavelength: 785 nm (CD)
Maximum output radiation power from pickup: 100 µW/VDE
Laser radiation from the pickup unit is safety level, but be sure the followings:
1. Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.
2. Do not adjust the variable resistor on the pickup unit. It was already adjusted.
3. Do not look at the focus lens using optical instruments.
4. Recommend not to look at pickup lens for a long time.
7
2.3. Service caution based on Legal restrictions
2.3.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.
Definition of PCB Lead Free Solder being used
The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)
Service caution for repair work using Lead Free Solder (PbF)
• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)
• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the
lead free solder.
• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30 degrees
C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
• The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
8
2.4. Handling Precautions for Traverse Unit
The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be
taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.
2.4.1. Cautions to Be Taken in Handling the Optical Pickup Unit

The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body.
Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.
1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.
2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed
should be short-circuited with a short pin or a clip.
3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.
4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexi-
ble cable, cut off the antistatic FPC.
2.4.2. Grounding for electrostatic breakdown prevention

Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electric-
ity in the working environment. Proceed servicing works under the working environment where grounding works is completed.
2.4.2.1. Worktable grounding

1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.
9
2.4.2.2. Human body grounding
1. Use the anti-static wrist strap to discharge the static electricity form your body.
10
3 Service Navigation
3.1. Service Information
This service manual contains technical information which will allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service
manual.
• CD Mechanism unit (DLS6C):
1) This model uses CD Mechanism Unit (DLS6C).
2) This service manual does not contain the following information on CD Mechanism Unit (DLS6C)
- Schematic Diagram, Block Diagram and P.C.B. layout of CD Mechanism Unit (DLS6C) P.C.B.
- Parts List for individual parts of CD Mechanism Unit (DLS6C).
- Exploded View and Part List for individual parts of CD Mechanism Unit (DLS6C).
Please refer to original service manual (Order No. MD0803034CE)
• Micro-processor:
1) The following components are supplied as an assembled part.

- Micro-processor IC, IC2801 (RFKWMAKX10PN)
• Speaker system:
1) This model uses speaker, SB-AKX10PN-K (PSG1001001CE)
11
4 Specifications Power Consumption in standby
mode
For PH only 0.3 W (Approximate)
For PN only 0.2 W (Approximate)
Q AMPLIFIER SECTION
Notes
RMS output power stereo mode
1. Specifications are subject to change without notice.
Front Ch (both channels driven) Mass and dimensions are approximate.
125 W per channel (4 Ω), 1 kHz, 10% THD 2. Total harmonic distortion is measured by the digital spectrum
Total RMS stereo mode power analyzer.
250 W Q System: SC-AKX10PN-K
PMPO output power (PN only) Main Unit: SA-AKX10PN-K
2800 W Front Speakers: SB-AKX10PN-K
Q FM/AM TUNER, TERMINALS SECTION Q System: SC-AKX10PH-K
Preset station FM 30 stations Main Unit: SA-AKX10PH-K
AM 15 stations Front Speakers: SB-AKX10PN-K
Frequency Modulation (FM)
Frequency range
For PH only
87.50 to 108.00 MHz (50 kHz step)
For PN only
87.9 to 107.9 MHz (200 kHz step)
87.5 to 108.0 MHz (100 kHz step)
Antenna terminal (s)
75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
For PH only
522 to 1629 kHz (9 kHz step)
For PN only
AUX Input
RCA pin jack
Q DISC SECTION
Discs played (8 cm or 12 cm)
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3* formatted disc)
(3) MP3*
* MPEG-1 layer 3
Pick up
Wavelength 785 nm(CD)
Laser Power CLASS 1 (CD)
Audio output (Disc)
Number of channels 2 (FL, FR)
FL = Front left channel
FR = Front right channel
Q USB SECTION
USB Port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
USB Port power 500 mA (max)
Q GENERAL
Power supply
For PH only
AC 110 to 127 V, 50 Hz
AC 220 to 240 V, 60 Hz
For PN only
AC 120 V, 60 Hz
Power Consumption
For PH only
64 W
For PN only
61 W
Dimensions (W x H x D) 250 mm x 336 mm x 245 mm
Mass 3 kg
Operating temperature range 0 °C to +40 °C
Operating humidity range 35% to 80% RH
(no condensation)
12
5 Location of Controls and Components
5.1. Main Unit Key Button Operation
POWER
MANUAL EQ
ALBUM
VOLUME +
AUX CD
TRACK /
USB
/ FM/AM
OPEN CLOSE
17
Display Panel [ / ][ / ]
Track skip or search,
Standby/on switch ( /l, POWER) fast-forward or rewind,
Press to switch the unit from on to standby mode or vice versa. tune or preset channel selection,
In standby mode, the unit is still consuming a small amount of sound quality adjustment,
power. manual EQ setting (BASS & TREBLE)
Volume Control Album selection
[ ] [ CD, / ]
Stop function Disc play and pause
[AUX] [Track]
Skip and play your desired track
D.BASS Selection
[USB, / ] Tuner (FM/AM) Selection

USB play or pause
[ , OPEN/CLOSE]
USB port Disc tray open or close
Remote control signal sensor 17 Disc tray
[MANUAL EQ] selection
13
5.2. Remote Control Key Button Operation
14
5.3. Media Information
15
6 Self-Diagnostic and Special Mode Setting
6.1. Cold-Start
Here is the procedure to carry out cold-start or initialize to shipping mode.
1. Unplug AC power cord
2. Press & hold [POWER] button
3. Plug AC power cord while [POWER] button being pressed
FL Display will show “_ _ _ _ _ _ _ _”
4. Release [POWER] button
16
6.2. Doctor Mode Table
6.2.1. Doctor Mode Table 1
Item Key Operation

FL Display
Mode Name Description Front Key
Doctor Mode To enter into Doctor Mode In CD Mode:
1.Press [ ] button on main
unit follow by [4] and [7] on
remote control.
2. To exit, press [OK] button on

remote control or press
[POWER, /I] button on main
unit or remote control.
EEPROM For checking of various items In CD Mode:

checksum and displaying EEPROM and 1. Enter Doctor Mode
check Firmware version.
Firmware
Version
EEPROM Checksum
(if applicable)
Condition 1
When EEPROM is detected and has ROM
correction.
(The correction point existing data is other
than 0 )
Condition 2
When EEPROM is detected and there is no
ROM correction.
(The correction point is 0 )
Condition 3
When the EEPROM is detected and has ROM
correction but NG.
(The file name is different even though a
EPROM is set,or no correction file is existing)
17
6.2.2. Doctor Mode Table 2
Item Key Operation
FL Display
Cold Start To active cold start upon next AC In Doctor Mode:
power up when reset start is execute 1. Press [4] button on
the next time. remote control.
Volume Setting To check the volume setting of a main In Doctor Mode:

Check unit. 1. Press [7],[8],[9],[>10]
button on remote control.
Press [7]: VOLUME50

Press [8]: VOLUME35 Volume
Press [9]: VOLUME27
Press [>10]: VOLUME0
FL Display To check the FL segment display In Doctor mode:

Check All segment will light up while all LED 1. Press [2] button on
blink at 0.5s,intervals.(if any) remote control.
DLS6 Reliability To determine CD Mechanism Unit In Doctor Mode:

Test (Loading) (DLS6C) Open/Close operation. 1.Press [5] button on remote
control.
In this mode, the tray will open &
close.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
2.To cancel, press [0]
on remote control.
Note: Refer to Section 6.3 Fig 1 for
process flow.
DLS6 Reliability To determine CD Mechanism DLS6C In Doctor Mode:

Test (Traverse) Access Inner & Outer disc operation. 1.Press [6] button on remote
control.
In this mode,ensure the CD is in the
main unit. The counter will
increment by one.
When reach 9999
will change to 0000
Note: Refer to Section 6.3 Fig 2. for

process flow.
on remote control.
DLS6 Reliability To determine CD Mechanism Unit In Doctor Mode:

Test (DLS6C) Open/Close & Access Inner & 1.Press [DIMMER] button on
(Combination) Outer Disc Operation. remote control.
In this mode,ensure the CD is in the

main unit. The counter will
increment by one.
When reach 9999
will change to 0000

Note: Refer to Fig. 6.3. for process
on remote control.
flow.
18
6.3. Reliability Test Mode (CD Mechanism Unit (DLS6C))
Below is the process flow chart of the aging test for the CD Mechanism Unit (DLS6C).
OPEN First Track

Operation Access
OPEN wait First Track

fot 1 s Play 5 s
CLOSE Last Track

Operation Access
CLOSE wait Count up Last Track Count up

for 5s Play 5 s
Fig. 1. Reliability Test (Loading) Fig. 2. Reliability Test (Traverse)
First Track
Access
First Track
Play 5 s
Last Track
Access
Last Track
Play 5 s
Open
Operation
Open wait
for 1 s
CLOSE Count up
Operation
Fig. 3. Reliability Test (Combination)
19
6.4. Self-Diagnostic Mode
Item Key Operation
FL Display
Self-Diagnostic To enter into self-diagnostic. In AUX Mode:
Mode 1. Press and hold [STOP] button on
the main unit for 2 secs.
2. Do not release [STOP]

button, press & hold [ / ] on
the main unit for 2 secs.
3. To exit, press [POWER,/l ]

button on main unit.
Service Mode To unlock the mechanism unit for (Display 1) In Self-Diagnostic Mode:
service.
1. Press [ Open / Close] button
During the process,’’SRCV TRV’’ will on main unit.
blink.
(Blinking) 2.To exit,press [POWER /l ]
When ready "SRVC TRV" will stop button on main unit.
blinking.
(Display 2)
In this mode, the disassembly of
DLS6C can be carry out. (Refer to
original service manual for CD
Mechanism Unit (DLS6C))
20
6.5. Self-Diagnostic Error Code Table
Self-Diagnostic Function (Refer Section 6.4. Self-Diagnostic Mode) provides information on any problems occurring for the unit and
its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held
unless it is cleared.
The error code is automatically display after entering into self-diagnostic mode.
6.5.1. Power Supply Error Code Table

Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
F61 Power Amp IC output Upon power on,
abnormal PCNT=HIGH, DCDET2=L Press [ -DEMO ] on main unit for
after checking LSI. next error.
F76 DCDET1 = L (NG)
F61-76 Both DCDET1 and

DCDET2 L (NG)
6.5.2. Mechanism Error Code Table (CD Mechanism Unit (DLS6C))

Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
F15 CD REST SW Abnormal CD traverse position initial Press [ ] on main
setting operation fail safe unit for next error.
time is over (10 sec) waiting
for REST SW to turn on.
F26 Communication between At the time of switching to Press [ ] on main

CD servo LSI and micro-p CD function,SENSE = H unit for next error.
abnormal. shall be detected using
DTMS system setting
command. If the error is
memorized when SENSE
= L is not detected within
fail safe timer time (20ms),
[F26] shall be displayed
simultaneously.This
display shall be retained if
the power is ON and at
CD function. If this error
occurs, CD operation
afterwards shall not be
executed as in the case of
[NO DISC].
H15 CD Open SW Abnormal During normal operation Press [ ] on main

CD OPEN SW On fail to be unit for next error.
detected with 3 sec.
H16 CD closing SW abnormal During Closing operation,if Press [ /-DEMO]on main

"POS_SW_CEN" is not unit for next error.
detected within 3 secs.
21
7 Troubleshooting Guide
7.1. Troubleshooting Guide for F61 and/or F76
This section illustrates the checking procedures when upon detecting the error of “F61” and/or “F76” after power up of the unit. It is
for purpose of troubleshooting and checking in SMPS, D-Amp & Main P.C.B.
Symptom Checking Items Possible Fault(s) Remarks

Set cannot ON 1 AC Cord 1 AC Cord Faulty, Loose connection. Refer to
2 AC Inlet, P5701 2 P5701 solder crack, dry joint. Section 7.2.1
3 Fuse, F1 3 Fuse, F1 Open. Fig. 1. SMPS
4 Photocoupler 4 PC5702/PC5799 solder crack. P.C.B.
PC5702, PC5799 Dry joint, short circuit, open circuit.
5 Switching IC, IC5701 5 IC5701 Faulty.
6 Switching IC, IC5799 6 IC5799 Faulty.
Set can ON 1 Speaker Output 1 Faulty speaker unit, Loose connection, Short. Refer to
then F61 Section 7.2.3
2 D-AMP circuit 2a D-AMP IC, IC5900 defective. Fig. 3. D-Amp
(DC voltage of +/-30V detected at speaker output) P.C.B.
Set can ON 1 Transformer T5701 1a Short circuit between Pin 14 and Pin 15. Refer to
then F76 1b Short circuit between Pin 15 and Pin 16. Section 7.2.1
1c Short circuit between Pin 16 and Pin 17. Fig. 1. SMPS
P.C.B.
2 DC-DC Circuit 2a Check cable wire connection between cable wire ZJ2701 Refer to
(At Main P.C.B) & connector CN5802 (At SMPS P.C.B) Section 7.2.2
2b Voltage Regulator IC (IC2701) & Fig. 2. Main P.C.B.
Switching Regulator IC (IC2702) faulty.
3 Photocoupler 3 PC5720 solder crack, Refer to
PC5720 Dry joint, short circuit, open circuit. Section 7.2.1
Fig. 1. SMPS P.C.B.
Set can ON 1 Rectifier D5801 1a Improper contact between D5801 to Heatsink. Refer to
working normally Rectifier D5802 Improper contact between D5802 to Heatsink. Section 7.2.1
for some time 2 Thermistor TH5860 1b Set trigger temperature protection. Fig. 1. SMPS
then F76 P.C.B.
22
7.2. Part Location
7.2.1. SMPS P.C.B.
AC Inlet:
P5701
Fuse:
F1
Switching IC:
IC5799
Switching IC:
Photocoupler:
IC5701 Thermistor: PC5702, PC5799
TH5860
Rectifier:
D5801, D5802
Transformer:
Connector:
T5701
CN5802
Photocoupler:
PC5720
Fig. 1 SMPS P.C.B.
23
7.2.2. Main P.C.B.
Cable wire:
ZJ2701
Switching Regulator IC:

IC2702
Voltage Regulator IC:

IC2701
Fig. 2 Main P.C.B.
24
7.2.3. D-Amp P.C.B.
D-Amp IC:
IC5900
Fig. 3 D-Amp P.C.B.
25
7.3. D-Amp IC Operation & Control
D-AMP IC Operation & Control
1) D-AMP IC (C1AB0000497) was used for this model (AKX10).

2) Three control pins (signal send from micro-processor IC) were used to control the D-AMP IC
operation such as muting, standby and normal operation. They are described as below: -
No Pin no Signal name Function

1 4 F_HOP Frequency Hop control.
2 6 MODE_DA Digital Amp On/Off control.
3 3 MUTE_F Digital Amp Muting control
Table 1: Digital AMP Pin Control.
Here is detailed description of the three control pins for the D-AMP IC
A) MODE_DA & MUTE_F were used to switch the D-AMP IC in the following muting status:
x L(Low/OFF): Standby / OFF
x H (High/ON): Operating or Mute
Below is the logic for the two pins used for the control of the D-AMP IC.
No MODE_DA MUTE_F Digital AMP IC mode status

1 L X OFF (0V)
2 H H Mute (2.5V)
3 H L Operating(5V)
Table 2: Digital AMP IC Mode Status.
Note: Standby/OFF condition of D.AMP IC is available / activated only during the following
event: Switching of Frequency Hoping, power off and start up (when the unit is undergoing
the transition from standby to normal operation mode)
B) F_HOP is used to control the D-AMP operation to avoid interference with AM source by
controlling the frequency source used. It will switch from one frequency to the other, depending on
the tuned AM frequency.
For 9 KHz Step
AM Band Frequency F_HOP Switching Frequency

522 ~ 558 L 301
567 ~ 639 H 350
648 ~ 855 L 301
864 ~ 945 H 350
954 ~ 1152 L 301
1161 ~ 1242 H 350
1251 ~ 1449 L 301
1458 ~ 1539 H 350
1548 ~ 1629 L 301
Table 3: F_HOP Control during 9 kHz Step
For 10 KHz Step
AM Band Frequency F_HOP Switching Frequency

520 ~ 560 L 301
570 ~640 H 350
650 ~ 860 L 301
870 ~ 950 H 350
960 ~ 1160 L 301
26
1170 ~ 1250 H 350
1260 ~ 1450 L 301
1460 ~ 1540 H 350
1550 ~ 1710 L 301
Table 4: F_HOP Control during 10 kHz Step
Note: During activating, the 3 control pins namely MUTE_F, MUTE_A and MODE_DA must
be used to cover the “Pop” sound cause by F-HOP switching.
27
8 Service Fixture & Tools
8.1. Service Tools and Equipment
Prepare service tools before process service position.
Service Tools Remarks

Main P.C.B. (CN2701) - SMPS P.C.B. (CN5802) REXX0189 (11P Cable Wire)
28
9 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the
service manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Top Cabinet
• Disassembly of Tuner P.C.B.
• Disassembly of Front Panel Assembly
• Disassembly of Panel P.C.B.
• Disassembly of Remote Sensor P.C.B.
• Disassembly of CD Open Button P.C.B.
• Disassembly of USB P.C.B.
• Disassembly of CD Lid
• Disassembly of Main P.C.B.
• Disassembly of Regulator IC (IC2701)
• Disassembly of D-Amp P.C.B.
• Disassembly of Audio Digital Amp IC (IC5900)
• Disassembly of SMPS P.C.B.
• Disassembly of Switching Regulator IC (IC5701)
• Disassembly of Regulator Diode (D5702)
• Disassembly of CD Mechanism Unit (DLS6C)
• Disassembly of CD Servo P.C.B.
• Disassembly of Rear Panel
• Disassembly of Voltage Selector P.C.B. (For PH only)
29
9.1. Disassembly Flow Chart
9.3. Top Cabinet
9.4. Tuner P.C.B. 9.15. SMPS P.C.B.
9.11. Main P.C.B.

9.5. Front Panel 9.16. Switching Regulator
Assembly IC (IC5701)
9.12. Regulator
IC (IC2701) 9.17. Rectifier Diode
9.6. Panel P.C.B.
(D5702)
9.13. D-Amp P.C.B.

9.7. Remote Sensor 9.18. Regulator Diode
P.C.B. (D5801)
9.14. Audio Digital Amp

9.8. CD Open IC (IC5900)
9.19. Regulator Diode
Button P.C.B. (D5802)
9.9. USB P.C.B. 9.20. Regulator Diode

(D5803)
9.10. CD Lid 9.21. CD Mechanism Unit

(DLS6C)
9.22. CD Servo P.C.B.
9.23. Rear Panel
9.24. Voltage Selector

P.C.B. (For PH only)
30
9.2. Main Components and P.C.B. Locations
31
9.3. Disassembly of Top Cabinet
Step 1 Remove 3 screws on each side.
Step 2 Remove 5 screws.

Step 3 Slightly pull both side of Top Cabinet outwards as arrow
shown.
Caution: During assembling, ensure that the Top Cabinet

catches are properly located into Front Panel Assembly as
shown.
Step 4 Slightly lift up both side of Top Cabinet in an outward

direction as shown.
Step 5 Remove Top Cabinet.
32
9.4. Disassembly of Tuner P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 1 screw.
Step 3 Release tab at left side of Front Panel Assembly.
Step 2 Detach 9P FFC at the connector (CN51) on Tuner

P.C.B..
Step 3 Remove Tuner P.C.B..
9.5. Disassembly of Front Panel

Assembly
Step 1 Detach 22P FFC at the connector (P901) on USB P.C.B.

Step 2 Detach 17P FFC at the connector (CN2709) on Main Step 4 Release tab at bottom.
P.C.B.
33
Step 5 Adjust slightly the left side of Front Panel Assembly as
arrow shown.
Step 7 Remove Front Panel Assembly.
Step 6 Release tab at right side.
34
9.6. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Front Panel Assembly”.
Step 1 Remove the Volume Knob.

Step 2 Remove the Track Knob.
Step 5 Release catches by following the sequences (1-7).
Step 3 Desolder 2 pins at the cable holder (JW6001) on Panel

P.C.B..
35
Step 6 Slightly release Portion A of Panel P.C.B. from Front 9.7. Disassembly of Remote Sensor
Panel Assembly.
Step 7 Remove Panel P.C.B.. P.C.B.
• Refer to “Disassembly of Panel P.C.B.”.
Step 1 Remove Remote Sensor P.C.B..

Caution: During assembling, ensure that Sensor P.C.B. is
properly inserted & fully connected to Panel P.C.B..
Caution: During assembling, ensure that Panel P.C.B. is

seated properly through the Guides & fully catched.
36
9.8. Disassembly of CD Open But- Caution: During assembling, ensure that the CD Open But-
ton P.C.B. is properly located and seated under the guides.
ton P.C.B.
Step 1 Desolder 2 pins (JW6201) on CD Open Button P.C.B..

9.9. Disassembly of USB P.C.B.


Step 2 Remove USB Unit.
Step 3 Lift up slightly and remove CD Open Button P.C.B. as

arrow shown.
37
Step 3 Desolder 3 pins. 9.10. Disassembly of CD Lid
Step 1 Remove the spring as arrow shown in order of

sequence (1) to (3).
Caution: During assembling, ensure that the spring is
assembly at right position.
Step 4 Remove USB P.C.B..
Step 2 Remove CD Lid as arrow shown.
38
9.11. Disassembly of Main P.C.B.
Step 1 Detach 9P FFC at the connector (CN2705) on Main

P.C.B..
P.C.B..
Step 3 Detach 17P FFC at the connecter (CN2709) on Main
P.C.B..
Step 4 Detach 22P FFC at the connecter (CN2704) on Main
P.C.B..
Step 5 Detach 11P Cable at the connector (CN5802) on SMPS
P.C.B..
Step 8 Detach Main P.C.B. from Rear Panel according to arrow

shown.
39
Step 9 Detach 22P FFC at the connector (CN2706) on Main 9.12. Replacement of Regulator IC
P.C.B..
Step 10 Remove Main P.C.B.. (IC2701)
• Refer to “Disassembly of Main P.C.B.”.
9.12.1. Disassembly of Regulator IC

(IC2701)
Step 1 Desolder pins of the Regulator IC (IC2701) on the sol-
der side of Main P.C.B..
Caution: During assembling, ensure that earth plate is

bended flat against the Main P.C.B. properly when inserted
to locators.

Step 3 Remove the Regulator IC (IC2701) from the Main
P.C.B..
Caution: Avoid touching the Small Heatsink due to its high
temperature after prolong use. Touching it may lead to
injuries.
40
9.12.2. Assembly of Regulator IC (IC2701) 9.13. Disassembly of D-Amp P.C.B.
Step 1 Apply grease to the Small Heatsink. • Refer to “Disassembly of Top Cabinet”.
Step 2 Mount the Regulator IC (IC2701) on Main P.C.B..
Caution: Ensure pins of the Regulator IC (IC2701) are prop- Step 1 Remove 2 screws.
erly seated on Main P.C.B..
Step 3 Screw the Regulator IC (IC2701) to the Small Heatsink.
Caution: Ensure the Regulator IC (IC2701) is tightly
screwed to the Small Heatsink.
Step 2 Cut the Tie Wrap.

Caution: During assembling, tie the 6P Cable Wire with the
Tie Wrap to SMPS P.C.B. as diagram shown.
Step 4 Solder pins of the Regulator IC (IC2701) on the solder Step 3 Detach 6P Cable Wire at the connector (CN5801) on
side of Main P.C.B.. SMPS P.C.B..
41
Step 4 Remove 1 screw. Caution: During assembling, ensure that D-Amp Bracket is
seated on the locator of Inner Chassis properly.
Step 5 Slightly lift up & remove D-Amp Unit as arrow shown.
Step 6 Detach 12P FFC at the connector (CN5902) on D-Amp

P.C.B..

Step 8 Remove D-Amp P.C.B.
42
Caution: Keep the D-Amp Bracket in safe place, place it Caution: During releasing of 2 catches, avoid touching the
back during assembling. Heatsink, due to high temperature.
9.14. Replacement of Audio Digital

Amp IC (IC5900) Step 3 Remove Heatsink Clip.
• Refer to “Disassembly of D-Amp P.C.B.”. Step 4 Remove Audio Digital Amp IC (IC5900).
9.14.1. Disassembly of Audio Digital Amp

IC (IC5900)
Step 1 Desolder pins of the Regulator IC (IC5900) on the sol-
der side of D-Amp P.C.B..
Step 2 Release 2 catches of Heatsink Clip.
43
9.14.2. Assembly of Audio Digital Amp IC 9.15. Disassembly of SMPS P.C.B.
(IC5900) • Refer to “Disassembly of Top Cabinet”.
Step 1 Apply grease to the Heatsink. • Refer to “Disassembly of Front Panel Assembly”.
Step 2 Install the Audio Digital Amp IC (IC5900) on D-Amp
P.C.B. Step 1 Remove 1 screw.
Caution: Ensure pins of the Audio Digital Amp IC (IC5900)
are properly seated on D-Amp P.C.B.
Step 3 Install Heatsink Clip to the Heatsink.
Caution: During assembling, ensure that Heatsink Clip is
catched onto Heatsink properly.
Step 2 Cut the Tie Wrap.

Caution: During assembling, tie the 6P Cable Wire with the
Tie Wrap to SMPS P.C.B. as diagram shown.
Step 4 Solder pins of the Audio Digital Amp IC (IC5900) on the Step 3 Detach 6P Cable Wire at the connector (CN5801) on
solder side of D-Amp P.C.B.. SMPS P.C.B..
Step 4 Detach 11P Cable Wire at the connector (CN5802) on
SMPS P.C.B..
44
Step 5 Remove 4 screws. • For PH only
Step 6 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Caution: Insulated Material is required in order to insulated
SMPS P.C.B. from other parts.
Step 7 Desolder 2 Wire pin, TL7(Black) , TL8(Red) wires pin.
Step 8 Remove SMPS P.C.B..
• For PN only
Step 6 Lift up to remove SMPS P.C.B..
Caution: Lift up SMPS P.C.B. slowly in order not to damage
both Main P.C.B. and D-Amp P.C.B..
45
9.16. Replacement of Switching Reg-
ulator IC (IC5701)
• Refer to “Disassembly of SMPS P.C.B.”.
9.16.1. Disassembly of Switching Regula-

tor IC (IC5701)
Step 1 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
9.16.2. Assembly of Switching Regulator

IC (IC5701)
Step 1 Apply grease to the Heatsink A.
Step 2 Install the Switching Regulator IC (IC5701) to the SMPS
P.C.B..
Caution: Ensure pins of the Switching Regulator IC
(IC5701) are properly seated and soldered on SMPS P.C.B..
Step 3 Screw the Switching Regulator IC (IC5701) to the Heat-
sink A.
Caution: Ensure the Switching Regulator IC (IC5701) is
tightly screwed to the Heatsink A.
Step 2 Remove 1 screw from the Switching Regulator IC

(IC5701).
Step 3 Remove the Switching Regulator IC (IC5701) from the
Heatsink A.
Caution: Avoid touching the Heatsink A due to its high
temperature after porlonged use. Touching it may lead to
injuries.
Step 4 Solder pins of the Switching Regulator IC (IC5701) on

the solder side of SMPS P.C.B..
46
9.17. Replacement of Rectifier Diode
(D5702)
9.17.1. Disassembly of Rectifier Diode

(D5702)
Step 1 Desolder pins of the Rectifier Diode (D5702) on the sol-

der side of SMPS P.C.B.
Step 2 Desolder pins of the Heatsink A.
Step 3 Remove 1 screw from the Switching Regulator IC

(IC5701).
Step 4 Remove the Heatsink A with Rectifier Diode (D5702).
Step 5 Remove 1 screw from the Rectifier Diode (D5702).
Step 6 Remove the Rectifier Diode (D5702) from the Heatsink
A.
47
Caution: Avoid touching the Heatsink A due to its high Step 6 Solder pins of the Heatsink A on the solder side of
temperature after prolonged use. Touching it may lead to SMPS P.C.B..
injuries. Caution: Ensure pins of the Rectifier Diode (D5702) are
properly seated and soldered on SMPS P.C.B..
9.17.2. Assembly of Rectifier Diode

(D5702)
Step 1 Apply grease to the Heatsink A.
Step 2 Screw the Rectifier Diode (D5702) to the Heatsink A.
Caution: Ensure the Rectifier Diode (D5702) is tightly
screwed to the Heatsink A.
Step 3 Install the Heatsink A with Rectifier Diode (D5702) on
SMPS P.C.B. in the direction of arrow.
Caution: Ensure the Heatsink A with Rectifier Diode
(D5702) are properly seated on SMPS P.C.B.
Step 4 Screw the Switching Regulator IC (IC5701) to the Heat-
sink A.
Caution: Ensure that Switching Regulator IC (IC5701) is
tightly screwed to the Heatsink A.
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder

side of SMPS P.C.B..
48
9.18. Replacement of Regulator 9.18.2. Assembly of Regulator Diode
Diode (D5801) (D5801)
Step 1 Apply grease to the Heatsink B.
Step 2 Install the Regulator Diode (D5801) on SMPS P.C.B.
Caution: Ensure pins of the Regulator Diode (D5801) is
9.18.1. Disassembly of Regulator Diode properly seated on SMPS P.C.B.
Step 3 Screw the Regulator Diode (D5801) to the Heatsink B.
(D5801) Caution: Ensure the Regulator Diode (D5801) is tightly
Step 1 Desolder pins of the Regulator Diode (D5801) on the screwed to the Heatsink B.
solder side of SMPS P.C.B.
Step 4 Solder pins of the Regulator Diode (D5801) on the sol-

der side of SMPS P.C.B..
Step 2 Remove 1 screw from the Regulator Diode (D5801).

Step 3 Remove the Regulator Diode (D5801) from the SMPS
P.C.B..
Caution: Avoid touching the Heatsink B due to its high
temperature after prolonged use. Touching it may lead to
injuries.
49
Diode (D5802) (D5802)
Step 2 Install the Regulator Diode (D5802) on SMPS P.C.B..
Caution: Ensure pins of the Regulator Diode (D5802) is
Step 3 Screw the Regulator Diode (D5802) to the Heatsink B.

der side of SMPS P.C.B..

Step 3 Remove the Regulator Diode (D5802) from SMPS
P.C.B..
injuries.
50
Diode (D5803) (D5803)
Step 2 Install Regulator Diode (D5803) on SMPS P.C.B.
Caution: Ensure pins of the Regulator Diode (D5803) are
Step 3 Screw the regulator diode (D5803) to the Heatsink B.

der side of SMPS P.C.B.

Step 3 Remove the Regulator Diode (D5803) from the SMPS
P.C.B..
injuries.
51
9.21. Disassembly of CD Mecha-
nism Unit (DLS6C)

P.C.B..
SMPS P.C.B..
Step 2 Release the D-Amp Unit from Inner Chassis catch.
Step 3 Detach 12P FFC (CN5902) on D-Amp P.C.B..
52
Step 7 Remove 3 screws (For PH only).

Step 7 Remove 2 screws (For PN only).
Step 9 Lift up SMPS Inner Chassis Unit.
Step 8 Detach Voltage Selector P.C.B. from Rear Panel as

arrow shown (For PH only).
53
Caution: During assembling, ensure that SMPS Inner
Chassis Unit is catched onto Rear Panel properly.
9.22. Disassembly of Rear Panel
• Refer to “Disassembly of Tuner P.C.B.”.
Step 1 Remove 7 screws (For PH only).

Step 1 Remove 6 screws (For PN only).
Step 10 Detach 22P FFC from CD Mechanism Unit (DLS6C).

Step 12 Remove CD Mechanism Unit (DLS6C).

54
Step 3 Lift up the SMPS Inner Chassis Unit to release the catch 9.23. Disassembly of Voltage Selec-
between the SMPS Inner Chassis Unit & the Rear Panel.
tor P.C.B. (For PH only)
Step 4 Release 2 tabs.

Step 5 Remove Rear Panel. Step 2 Detach Voltage Selector P.C.B. from Rear Panel as
arrow shown.
55
Step 3 Desolder 2 Wire pins, TL5(Black), TL6(Red) on the Volt- 9.24. Disassembly of CD Servo
age Selector P.C.B..
Step 4 Remove Voltage Selector P.C.B.. P.C.B.
• Refer to “Disassembly of CD Mechanism Unit (DLS6C)”.

Step 2 Desolder 4 pins.
Step 3 Slightly lift up the CD Servo P.C.B..
Step 4 Flip the CD Servo P.C.B. as arrow shown.
56
Step 5 Detach 16P FPC at the connector (CN7001) on CD
Servo P.C.B..
57
10 Replacement of Traverse Unit
10.1. Disassembling Procedures
Step 1 Release the guide.
Step 2 Push the Traverse Slide Plate (rib), ensure both grooves
are opened.
Caution: Ensure the OPU is face upwards, avoid touching

the surface of the traverse unit.
Step 3 Slide out the Traverse Unit as arrow shown.
58
10.2. Assembling Procedure
Caution: Removal of the short pin is necessary for replace-
ment of new traverse unit.

Step 2 Push the Traverse Slide Plate (rib), ensure both grooves
are opened.
59
Step 3 Slot the Traverse Unit at approximately 45° into the
mecha chassis as arrow shown.
Caution: Ensure the bosses fix exactly onto the guides.

Step 5 Push the Traverse Slide Plate (rib) to lock the Traverse
Unit in.
60
11 Service Position 11.3. Checking and Repairing of
Note: For description of the disassembly procedures, see Panel P.C.B.
the Section 9. Step 1 Remove Top Cabinet.
11.1. Checking and Repairing of Step 3 Attach 17P FFC to the connector (CN2709) on Main
Main P.C.B. P.C.B..
Step 4 Attach 22P FFC to the connector (P901) on USB
.P.C.B..
Step 2 Main P.C.B. can be checked & repaired at its original
Step 5 Panel P.C.B can be chacked & repaired as diagram
position.
shown.
11.2. Checking and Repairing of D-

Amp P.C.B.
Step 2 D-Amp P.C.B. can be checked & repaired at its original
position.
61
11.4. Checking and Repairing of Step 5 Cut the Tie Wrap.
USB P.C.B. SMPS P.C.B..
Step 1 Remove Top Cabinet. Step 7 Detach 11P Cable Wire at the connector (CN5802) on
Step 2 Remove Front Panel Assembly. SMPS P.C.B..
Step 3 Remove USB P.C.B..
Step 4 Position Front Panel Assembly as diagram shown.
Step 5 Attach 17P FFC to the connector (CN2709) on Main
P.C.B..
Step 6 Attach 22P FFC to the connector (P901) on USB P.C.B..
Caution: Insulated Material is required to insulate USB Unit
from other parts.
Step 7 USB P.C.B. can be chacked & repaired as diagram
shown.
11.5. Checking and Repairing of

SMPS P.C.B.
Step 3 Remove 2 screws.(For PH only)
Step 3 Remove 1 screw.(For PN only)

62
Step 9 Remove SMPS P.C.B..
Caution:Lift up SMPS P.C.B. slowly in order not to damage
both the Main P.C.B. & D-Amp P.C.B..
Step 10 Position Front Panel Assembly & SMPS P.C.B. as dia-

gram shown.
Caution: Insulated Material is required to insulate SMPS
P.C.B. from other parts.
Step 11 Attach 17P FFC to the connector (CN2709) on Main
P.C.B..
Step 12 Attach 22P FFC to the connector (P901) on USB
P.C.B..
Step 13 Extend the wire with extension Cable Wire

(REXX1089) (11P Cable Wire from CN2701 to CN5802).
Step 14 Connect 6P Cable Wire to the connector (CN5801) on
SMPS P.C.B..
Step 15 SMPS P.C.B. can be checked & repaired as diagram
shown.
63
12 Voltage & Waveform Chart
Note:
• Indication Voltage Values are in standard values for the unit measured by the DC electronic circuit tester (high-impedance) with
the chassis taken as standard.
Therefore, there may exist some errors in voltage values, depending on the internal impedance of the DC circuit tester.
• Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point because it
may differ from actual measuring value due to difference of Measuring instrument and its measuring condition and product itself.
12.1. CD SERVO P.C.B.

REF NO. IC7001
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.3 0 1.6 3.2
STANDBY 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1.6 3.4
REF NO. IC7001

MODE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CD PLAY 1.6 0 1.6 1.7 1.7 0 3.1 1.5 3.1 3.1 0 1.6 1.5 1.6 1.9 1.9 1.7 1.8 1.8 1.7
STANDBY 1.7 3.4 1.7 1.7 1.7 0 3.4 1.5 3.4 3.4 0 1.7 1.6 1.7 1.7 1.7 1.7 1.7 1.7 1.7
REF NO. IC7001

MODE 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
CD PLAY 0.2 2.4 1.9 1.7 1.2 1.8 3.2 1.2 1.3 1.3 1.7 1.7 0.9 1.5 1.5 1.5 0 3.0 1.5 0
STANDBY 0 3.4 1.6 1.7 1.7 1.8 3.4 1.2 1.2 1.2 1.7 1.7 0.9 1.1 1.1 1.6 0 3.1 1.6 0
REF NO. IC7001

MODE 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
CD PLAY 3.2 0 0 0 0 0 3.0 1.5 3.3 1.0 0.1 3.3 0 1.6 0 1.5 3.2 0 3.3 0
STANDBY 3.4 0 0 0 3.3 0 3.3 0 3.3 0 0.1 3.3 0 1.6 3.4 1.5 3.4 0 3.4 0
REF NO. IC7001

MODE 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
CD PLAY 0 3.3 0 0 0 0 0 0 0 0 0 0 3.2 0 0 0 0 0 0 0
STANDBY 0 3.4 0 0 0 0 0 0 0 0 0 0 3.4 0 0 0 0 0 0 0
REF NO. IC7002

MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 1.6 0 1.6 0 0 0 0 0 0 7.7 4.4 3.5 3.6 3.6 3.5 3.8 3.7 3.6 7.7 0
STANDBY 1.7 0 1.7 3.3 0 0 0 0 0 7.7 4.0 4.0 3.6 3.6 3.6 3.6 3.6 3.6 7.7 0
REF NO. IC7002

MODE 21 22 23 24 25 26 27 28 29 30
CD PLAY 7.7 0 0 0 7.7 1.6 1.6 1.6 0 0
STANDBY 7.7 0 0 0 7.7 1.7 1.7 1.7 0 0
REF NO. Q7601

MODE E C B
CD PLAY 3.1 2.0 2.4
STANDBY 3.4 0 3.4
SA-AKX10PH/PN CD SERVO P.C.B.
64
12.2. Main P.C.B. (1/2)
REF NO. IC2101
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 0 4.7 9.4 0 3.3 3.3 0
STANDBY 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 0 4.7 9.5 0 3.3 3.3 0
REF NO. IC2101

MODE 21 22 23 24 25 26 27 28 29 30 31 32
CD PLAY 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
STANDBY 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.6 4.6 4.6
REF NO. IC2201

MODE 1 2 3 4 5 6 7 8
CD PLAY 6.1 6.1 6.1 0 6.1 6.1 6.1 12.2
STANDBY 6.1 6.1 6.1 0 6.1 6.1 6.1 12.2
REF NO. IC2701

MODE 1 2 3
CD PLAY 16.7 0 12.2
STANDBY 16.7 0 12.2
REF NO. IC2702

MODE 1 2 3 4 5
CD PLAY 16.7 5.2 0 1.0 2.9
STANDBY 17.0 5.2 0 1.0 2.9
REF NO. IC2801

MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 3.3 0 0 0 3.3 3.3 0 0 0 0.6 0.6 0 1.7 0 1.7 3.4 3.1 0 3.1 1.9
STANDBY 3.3 0 0 0 3.3 3.3 3.3 0 0 0.7 0.7 3.3 1.7 0 1.7 3.4 3.4 3.3 0 2.1
REF NO. IC2801

MODE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CD PLAY 0 0 0 0 0.1 0 0 0 3.3 3.3 0 0 0 0 3.3 0 0 0 0 0
STANDBY 0 0 0 0 0.1 0 0 0 3.3 3.3 0 0 0 0 3.3 3.3 0 0 0 0
REF NO. IC2801

MODE 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
CD PLAY 0 0 0 0 0 0 0 0 0 0 3.3 3.2 0 0 0 3.0 2.3 3.3 2.2 3.3
STANDBY 0 0 0 0 0 0 0 0 0 0 3.3 3.2 0 0 0 3.3 0 3.3 0 3.3
REF NO. IC2801

MODE 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
CD PLAY 3.3 3.3 3.3 0 0 3.3 0 0 0 0 0 0 0 0 0 0 0 0 0 3.3
STANDBY 3.3 3.3 3.3 0 0 3.3 0 0 0 0 0 0 0 0 0 0 0 0 0 3.4
REF NO. IC2801

MODE 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
CD PLAY 0 2.7 0.4 1.8 0 0 0 3.3 0 3.3 0 0 3.3 3.3 1.1 0 1.0 3.3 3.3 1.0
STANDBY 0 2.8 0.4 1.9 0 0 0 3.3 0 2.3 0 0 3.3 3.3 1.2 0 1.1 3.3 3.3 1.1
SA-AKX10PH/PN MAIN P.C.B.
65
12.3. Main P.C.B. (2/2)
REF NO. IC2802
MODE 1 2 3 4 5 6 7 8
CD PLAY 0 0 0 0 0 1.2 0 3.3
STANDBY 0 0 0 0 0 1.2 0 3.3
REF NO. Q2220 Q2221 Q2222 Q2223 Q2301

MODE E C B E C B E C B E C B E C B
CD PLAY 7.3 12.0 7.8 0 7.1 0 7.2 12.1 7.8 0 7.2 0 0 0 0
STANDBY 7.2 12.1 7.8 0 7.1 0 7.2 12.1 7.9 0 7.1 0 0 0 0
REF NO. Q2302 Q2701 Q2702 Q2705 Q2790

CD PLAY 0 0 0 7.6 10.6 8.2 3.3 5.2 4.0 16.5 0 16.4 0 0 0.7
STANDBY 0 0 0 7.6 10.6 8.2 3.3 5.2 4.1 16.7 0 16.8 0 0 0.6
REF NO. Q2803 QR2701 QR2702 QR2704 QR2801

CD PLAY 3.2 3.3 2.6 0 3.3 0.1 0.1 3.3 0 0 3.3 0 0 3.1 0
STANDBY 3.3 3.3 2.6 0 3.3 0 0 3.3 0 0 3.3 0 0 3.3 0
REF NO. QR2802 QR2831 QR2832

MODE E C B E C B E C B
CD PLAY 0 3.3 0 3.3 3.2 0.1 3.2 3.2 0.1
STANDBY 0 0 3.0 3.3 3.3 0.1 3.4 3.4 0.1
SA-AKX10PH/PN MAIN P.C.B.
12.4. Panel P.C.B.

REF NO. IC6001
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 0 0 0 0 2.3 1.4 0.4 2.8 1.9 0 0 0 3.4 -20.1 -20.1 -20.1 -24.0 -24.0 -24.0 -24.0
STANDBY 0 0 0 0 2.3 1.4 0.4 2.8 1.9 0 0 0 3.4 -20.1 -20.1 -20.1 -24.0 -24.0 -24.0 -24.0
REF NO. IC6001

MODE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CD PLAY -22.0 -23.9 -23.9 -23.9 -20.1 -22.0 -22.0 -23.9 -23.9 -24.3 -22.3 -22.2 -22.3 -22.3 -22.2 -22.2 -22.2 -22.2 -22.2 -22.2
STANDBY -22.0 -23.9 -23.9 -23.9 -20.1 -22.0 -22.0 -23.9 -23.9 -24.3 -22.3 -22.2 -22.3 -22.3 -22.2 -22.2 -22.2 -22.2 -22.2 -22.2
REF NO. IC6001

MODE 41 42 43 44
CD PLAY -22.2 -22.2 3.4 0
STANDBY -22.2 -22.2 3.4 0
REF NO. Q6101

MODE E C B
CD PLAY 0 16.5 -0.1
STANDBY 0 16.7 -0.1
SA-AKX10PH/PN PANEL P.C.B.
66
12.5. USB P.C.B.
REF NO. IC900
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 1.2 1.2 1.3 0 0 0 3.3 3.2 3.3 1.8 1.6 1.6 0 0 0 0 3.3 3.3 3.3 1.3
STANDBY 1.1 1.1 1.1 0 0 0 3.2 3.2 3.3 1.5 1.4 1.5 0 0 0 0 3.3 3.4 3.4 1.2
REF NO. IC900

MODE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CD PLAY 0.9 1.3 1.3 1.2 1.2 1.2 1.3 1.3 1.2 1.3 1.3 1.3 1.3 1.3 1.2 1.2 1.1 3.3 1.0 0
STANDBY 1.3 1.3 1.3 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.3 1.3 1.3 3.4 1.3 0
REF NO. IC900

MODE 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
CD PLAY 0.9 1.8 0.9 0 0.9 3.3 0.3 3.3 3.3 0 3.3 0.9 0 0 0.9 3.0 0 0 0 0.9
STANDBY 1.3 1.8 1.3 0 1.3 3.3 0.3 3.3 3.4 0 3.4 1.3 0 0 1.3 3.3 0 0 0 1.3
REF NO. IC900

MODE 61 62 63 64
CD PLAY 0 1.8 0.9 3.3
STANDBY 0 1.8 1.3 3.3
SA-AKX10PH/PN USB P.C.B.
12.6. D-Amp P.C.B.

REF NO. IC5900
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY -30.0 -3.1 -3.1 34.9 0 -34.9 -26.4 35.2 6.1 -3.1 -35.1 -25.0 -35.1 -3.1 6.1 35.2 -34.9 -34.9 0 34.9
STANDBY -30.0 -3.0 -3.0 34.9 0 -34.9 -26.4 35.2 6.2 -3.0 -35.1 -25.0 -35.1 -3.0 6.2 35.2 -34.9 -34.9 0 34.9
REF NO. IC5900

MODE 21 22 23
CD PLAY -3.1 -3.1 4.6
STANDBY -3.0 -3.0 2.5
REF NO. Q5901 Q5902 Q5903 Q5905 Q5906

CD PLAY -34.9 -34.9 -34.3 5.2 5.2 4.5 0 0 0.7 0 4.6 0 0 3.3 0
STANDBY -34.9 -34.9 -34.3 5.2 5.2 4.5 0 0 0.7 0 0.1 0.7 0 3.3 0
REF NO. Q5907 QR5900 QR5901

MODE E C B E C B E C B
CD PLAY 0 3.3 0 0 0 3.3 5.2 5.2 0
STANDBY 0 3.3 0 0 0 3.4 5.2 5.2 0
SA-AKX10PH/PN D-AMP P.C.B.
67
12.7. SMPS P.C.B.
REF NO. IC5701
MODE 1 2 3 4 5 6 7
CD PLAY 164.8 0 0 19.1 0.1 1.4 0.5
STANDBY 164.8 0 0 19.1 0.1 1.4 0.5
REF NO. IC5799

MODE 1 2 3 4 5 6 7 8
CD PLAY 5.9 1.0 2.3 11.0 164.2 0 0 0
STANDBY 5.9 1.0 2.3 11.0 164.2 0 0 0
REF NO. IC5801

MODE 1 2 3
CD PLAY -2.0 -32.5 -35.2
STANDBY -2.0 -32.6 -35.2
REF NO. IC5899

MODE 1 2 3
CD PLAY 2.3 2.5 0
STANDBY 2.3 2.5 0
REF NO. Q5720 Q5721 Q5722 Q5803 Q5860

CD PLAY 7.3 8.5 7.6 19.7 19.7 19.0 0 19.6 0.2 0 35.2 0 1.3 0 0.7
STANDBY 7.4 8.6 7.7 19.7 19.7 19.0 0 19.6 0.2 0 35.2 0 1.3 0 0.7
REF NO. Q5861 Q5862 Q5898 QR5801 QR5802

CD PLAY 0 0 0.7 0 3.3 0 0 2.1 0.4 0 3.1 -3.0 0 3.3 6.6
STANDBY 0 3.3 0 0 3.3 0 0 2.1 0.4 0 3.1 -2.9 0 3.3 6.6
REF NO. QR5810

MODE E C B
CD PLAY 0 0.1 3.1
STANDBY 0 0.1 3.1
SA-AKX10PH/PN SMPS P.C.B.
12.8. Tuner P.C.B.
REF NO. IC52

MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CD PLAY 0 0 3.0 3.0 0 0 0 0 0 0 3.3 3.3 1.4 0.3 0.3 0.3 0 0 0 0
STANDBY 0 0 3.0 3.0 0 0 0 0 0 0 3.3 3.3 1.4 0.3 0.3 0.3 0 0 0 0
SA-AKX10PH/PN TUNER P.C.B.
68
12.9. Waveform Table
WF No. IC52-9,17 (PLAY) WF No. IC52-13,14 (PLAY) WF No. IC900-11 (PLAY) WF No. IC900-12 (PLAY)
0.2Vp-p(100usec/div) 0.1Vp-p(200usec/div) 2.2Vp-p(20nsec/div) 3Vp-p(20nsec/div)
WF No. IC2101-2,12 (PLAY) WF No. IC2101-6,8 (PLAY) WF No. IC2101-31,32 (PLAY) WF No. IC2801-10,11 (PLAY)
0.1Vp-p(200usec/div) 1.3Vp-p(200usec/div) 3.6Vp-p(200usec/div) 1.8Vp-p(10usec/div)
WF No. IC2801-13 (PLAY) WF No. IC2801-15 (PLAY) WF No. IC5900-2,3 (PLAY) WF No. IC5900-10,14 (PLAY)
3.2Vp-p(20nsec/div) 2Vp-p(50nsec/div) 1.4Vp-p(1msec/div) 100Vp-p(1usec/div)
WF No. IC5900-21,22 (PLAY) WF No. IC6001-5 (PLAY) WF No. IC6001-8 (PLAY) WF No. IC7001-21 (PLAY)
1.5Vp-p(500usec/div) 1.5Vp-p(1usec/div) 3.2Vp-p(2usec/div) 1.8Vp-p(5usec/div)
WF No. IC7001-23,24 (PLAY) WF No. IC7001-56,59 (PLAY) WF No. IC7001-80 (PLAY) WF No. IC7001-81 (PLAY)
0.52Vp-p(1usec/div) 2.4Vp-p(100usec/div) 4.8Vp-p(20nsec/div) 1.9Vp-p(20nsec/div)
69
13 Illustration of ICs, Transistor and Diode
RFKWMAKX10PN MN6627954AMA C0HBB0000061 (64P) C1BB00001151 (32P) BA5948FPE2 (28P) C1BA00000497 (23P)
(100P) (100P) MNZSFB5KJM2 (64P) C3EBFY000006 (8P)
No.1
No.1
No.1 No.1
VUEALLPT031 (20P) C0AABB000125 (8P) C5HACYY00004 (7P) MIP2F20MSSCF (8P) C0DAAYG00001 (5P) C0DABFC00002
C5HACYY00005 (7P) C0DAEMZ00001
4
3
2
1
1
5
1 3 5 2
7 2 4 3
No.1 8
B1BABG000007 B1BABK000001 B1ADCE000012

C0CAAKG00046 B1ADCF000001 B1AAJC000019
B1ABGC000005 B1ACKD000006
C
B1ABCF000176
B1GBCFJJ0051
B B1GBCFLL0037
1
2 E E B1GDCFGA0018 E
3 C
B E B1GDCFGG0026 C
B
C
B B1GDCFJJ0047
B0ADCJ000020 B1GBCFJN0038 B0ABSM000008 B0ZAZ0000052 B0HFRJ000012 B0FBAR000043
A CA
Cathode
A
Anode
Ca A Ca
A Cathode Anode
CA A -
CA A Ca A ~~
+
B1BACG000023 B0ACCK000012
MA2YF8000L Cathode B0BC018A0267 B0BC010A0007
Cathode
Cathode B0BC2R4A0263 B0BC019A0007
Ca B0BC5R1A0266 Ca B0BC035A0007
A
Ca
Anode
B0BC8R2A0266 B0BC6R100010
B0BC024A0269 Anode
Ca Anode
B0BC9R000008
A A A
B0BC036A0264
A
B0JCPD000025 MAZ8056GML
B0HCSP000001 Ca
Cathode Cathode Cathode B0EAKM000117
Cathode
B0EAMM000057
Ca
Ca Ca
A B0HAMP000094
Anode
Anode B0JAME000114
Anode Anode
A A
A
70
14 Simplified Block Diagram
14.1. Overall Simplified Block Diagram
ASP IC
Tuner Silicon
bass/ mid/ treble

FM/AM HPF
selector
Clip H/P
AUX
attenuation AMP LPF
Music Port
Muting
Headphone cct
SW Muting
Level meter LPF cct
cct
Clip sensor
cct
Signal Speaker Units

Flash IC detection
ASP Clk
ASP Data EEPROM
IC
SDIO Fan circuit
SDCLK
MICRO-PROCESSOR Supply Fan
TU INT 12V
TU RST IC ctrl cct
CD MCLK
Single CD CD MDATA
CD MLD
DLS6 mecha CD STAT abnormal Biased Fan signal
CD RST
CD RESET SW detection amplifier feedback
MicroP, LSI CD LOADING cct
CD OPEN SW
Motor Drv
To D-AMP
LOADER Power Supply
safety
FLCLK detection
FLData cct
FLCS
Feedback
12V Reg
cct
To microP LED Control From
AD port microP Regulator circuit
Panel Mosfet
Blinking
Switching IC
LED Control FL Driver FL switching
transformer
Rectifier
Key1
Key2
Vol Jog
Rotary Jog to microP Sub trans
supply
FL DISPLAY UNIT
to microP Sync cct
for AC
detect SMPS
71
14.2. D-Amp Block Diagram
Block Connection Diagram
FROM BIG FAN1 (100mA)

SMPS
BIG FAN2(100mA)
+/-VCC=33.8V, DIGITAL AMP IC
24V(ECO enable) (NXP)
Bi-amp Filter(15mA)
+18V (245mA)(265mA)
REG 12V
(11.5V~19V) +12V HEADPHONE AMP(15mA)
SUBWOOFER AMP(15mA)
1A Max
(505mA)/830mA
WIRELESS AMP(20mA)
PD =3.03W/4.98W
(300mA) REG 5V
Heatsink Needed
+5V WIRELESS+5V(300mA)
BACKUP
+3.3V (200mA) +8.2V 7.5V
(Discrete)
CD module motor
200mA)
(60mA) 9.5V
ASP IC(30mA)
MIC MIXING AMP (15mA)
MIC IC (15mA)
(838mA)
DC-DC 5.2V
JUPITAR MODULE(500mA)
+5.2V
NI
5.2V
1.5A Max LED LIGHTING X 13PCS(170mA)
(168mA)
+3.3V DIGITAL TUNER(23mA)
(Discrete)
(200mA) JUPITER/USB MODULE(50mA)

-Vp(20mA)
FL DC-DC
CONVERTER CD+3.3V(75mA)
FL1-(+250mA)
(85mA) FL2-(-240MA)
MCU SYSTEM(50mA) FL+3.3V(20mA)
KEY LINE(15mA)
PANAMEX model
REMOTE IR(15mA)
EEPROM(5mA)
72
15 Block Diagram
15.1. Servo/System Control
: CD AUDIO INPUT SIGNAL LINE : USB SIGNAL LINE
MAIN P.C.B.
IC2802 IC2801
C3EBFY000006 RFKWMAKX10PN
EEPROM MICRO PROCESSOR
PANEL P.C.B.
SK 2 54 EE CLK
IC6001
C0HBB0000061 FL6001
DI 3 55 EE DAT
FL DISPLAY DRIVER FL DISPLAY
DO 4
FL DOUT 83
FL DA CN2709 CN6002 FL DOUT
7
DIN
F+ 1 F+
10 8 COMMAND SEGMENT
D2803 DECODER DRIVER
SERIAL SG1 SG1
QR2801 FL CLK 82
FL CLK CN2709 CN6002 FL CLK
8
CLK
DATA
8 10 GRID
INTERFACE DISPLAY F- 44 F-
RAM DRIVER
VREF RESET 12 RESET
FL CS 84
FL CS CN2709 CN6002 FL CS
9
STB
(24bits x 12 Words)
SG16 SG16
11 7
MULTIPLEXED
USB P.C.B. DRIVER
G1 GR1
OSC TIMING OUTPUT

5 OSC
GENERATOR LATCH
G4 GR4
KEY MATRIX SHIFT

G5 GR5
IC900 MEMORY REGISTER
MNZSFB5KJM2
P903 USB XIN 15
DATA
SELECTOR
G12 GR12
USB PORT CONTROLLER
X2802 +3.3V 13 VDD
I2C REQ/WR START 47

P901 CN2704 USB IRQ
79 USB IRQ/WR START
XOUT 13 43 VDD
D- 2 4 USBD- DIMMING
5 5
XCIN 10 -VP 30 VEE CIRCUIT
I2C CLK/WR END 46
P901 CN2704 USB SCL
29 USB SCL
D+ 3 6 USBD+
3 3 X2801
I2C DATA/ERROR 48
P901 CN2704 USB SDA
30 USB SDA
VBUS 1 5V XCOUT 11
6 6
11 OSCI P901 CN2704 USB RST S6011
NRST 14 33 CLK S6006 S6007 S6008 S6009 S6010 CD S6012
19 19 MANUAL EQ FORWARD REWIND ALBUM+ ALBUM- FM/AM
X900 PLAY/PAUSE
VERR 50
P901 CN2704 USB VE
78 VERR
12 OSCO 4 4
TERR 51
P901 CN2704 USB TE
80 TERR
14 14
KEY2 93
KEY2 CN2709 CN6002 KEY2
CD NRST 8
P901 CN2704 CD RST 15 3
18 18
CD STAT 57
P901 CN2704 CD STAT
10 10 S6004
P901 CN2704 CD MLD S6001 S6002 S6003 USB S6005 S6201
CD MLD 64 POWER STOP/-DEMO AUX PLAY/PAUSE D.BASS OPEN/CLOSE
17 17
CD DATA 58
P901 CN2704 CD MDATA
11 11
CD CLK 56
P901 CN2704 CD MCLK
8 8 KEY1 94
KEY1 CN2709 CN6002 KEY1 ZJ6001A* JW6201*
16 2 1 1
CD OPEN
ROTARY JOG CN2709 CN6002 ROTARY JOG VR6002
BUTTON P.C.B.
ROTARY JOG 88
13 5 TRACK JOG
REMOTE
SENSOR P.C.B.
CD SERVO P.C.B. J VOLA CN2709 CN6002 J VOLA VR6001
VOL JOG 90
14 4 VOLUME JOG
Z6301
REMOTE CONTROL
SENSOR
IC7001 RMT 18
RMT CN2709 CN6002 RMT CN6001 CN6301 VREF
MN6627954AMA 17 1 3 3
IC7002
BA5948FPE2 SERVO
OPTICAL PICKUP UNIT M7301* DRIVER PROCESSOR
TRAVERSE MOTOR
+
13 D2- PC1 4 22 PC
IN4 27 24 TRP
D-AMP P.C.B.
14 D2+
MODE DA 6
MOD DA CN2711 CN5902
M7302* IN3 28 25 FOP 10 3
SPLINDLE MOTOR QR2831
+ IN2 1 23 TRVP
11 D1-
F HOP1 4 SWITCH
F HOP1 CN2711 CN5902
IN1 3 21 SPOUT 6 7
12 D1+
FROM/TO
CN7001 F+
15 D3- POWER AMPLIFIER
16 CD MCLK
81 X1 MCLK 67
CN7002 CN2706 56 MCLK
CN7001 F-
16 D3+ 14 9
ACTUATOR
15 X7201 CN7002 CN2706 CD MDATA
CN7001 T+ MDATA 68 57 MDATA OUT
17 D4- 80 X2 13 10 MUTE F CN2711 CN5902
14 CD MLD MUTE F 3
MLD 69
CN7002 CN2706 58 MLD
5 8
CN7001 T-
18 D4+ 12 11 DC DET AMP CN2711 CN5902
13 DCDET DAMP 5
STAT 70
CN7002 CN2706 CD STAT
59 STATUS
9 4
11 12
CN7002 CN2706 CD BLKCK
Q7601 BLKCK 71
10 13
75 BLKCK
CN7001 LD NRST 72
CN7002 CN2706 CD RST
60 CD RST
LASER DRIVE 42 LD 9 14
4
TUN SCLK CN2705 CN51 TUNER P.C.B.
TUN SCLK 25
LASER 3 7 FROM/TO
DIODE 3.3V S7201
RESET TUN SIO 26
TUN SDIO CN2705 CN51 AUDIO
CN7002 CN2706 CD RESET SW 4 6
CN7001 LPD
41 PD 61 CD RESET SW
11 5 18
CN7002 CN2706 CD OPEN SW
66 CD OPEN SW
3 20
S7202
39 C
CD OPEN SMPS P.C.B.
CN7001 A SMPS BP 49
AM BP ZJ2701* CN5802
40 A 11 11 FROM/TO
7
CN7002 CN2706 ZJ2701* CN5802
CN7001 B OUTL 56
22 1 SYNC 20
SYNC POWER SUPPLY
38 B TO AUDIO 1 1
PHOTO 9
37 D OUTR 59
CN7002 CN2706
DIDE CN7001 E
35 E 20 3
3
CN7001 F
36 F
2
D2790 DC DET AMP
SWITCH 5V FROM/TO
CN7002 CN2706 CD LOADING
63 CD LOAD CW(H) POWER SUPPLY
4 19 Q2790
65 CD LOAD CCW(L) PCONT
PCONT 52 PCONT
DC DET PWR
DCDET PWR 86 DC DET PWR
CLIP S
CLIP SENS 86 CLIP S
CLIP ATTN
CLIP ATTN 85 CLIP ATTN
FROM/TO
AUDIO
ASP CLK
ASP-CLK 36 ASP CLK
ASP DA
ASP-DATA 35 ASP DA
SA-AKX10PH/PN SERVO/SYSTEM CONTROL BLOCK DIAGRAM
73
15.2. Audio
: CD AUDIO INPUT SIGNAL LINE : AUX AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : AM SIGNAL LINE : FM SIGNAL LINE : AM/FM SIGNAL LINE
MAIN P.C.B.
IC52 IC2101
VUEALLPT031 C1BB00001151 IC2201
JK51 FM/AM RADIO RECEIVER ASP C0AABB000125 D-AMP P.C.B.
OP-AMP Q2220
CN51 CN2705 TU-L LOUT FRONT R CN2711 CN5902

FM ANT 2 FMI LOUT 14
2 8
12 INL2 L CH 3 2 1 AMP 3 10
ROUT 13
CN51 CN2705 TU-R
2 INR2
TO
9 RCLK 4 6 POWER AMPLIFIER
X51 ROUT
7 AMP
FRONT L CN2711 CN5902
R CH 13 6 1 12
17 DCLK
JK52 L52
Q2222
SDIO 8
CN51 CN2705
1 3 4 4 AMI 6 4 FROM/TO
Q2302 Q2221
CN51 CN2705 SERVO/SYSTEM CONTROL
AM ANT 2 SCLK 7
7 3
SWITCH SWITCH
2 1 6
Q2301 Q2223
TUNER P.C.B. SWITCH SWITCH
CLIP ATTN
JK2801
FROM/TO
L AUX-L SERVO/SYSTEM CONTROL
2 10 INL4 CLIP SENSOR
CIRCUIT CLIP S
AUX IN R
3
AUX-R
4 INR4
CD SERVO P.C.B.
CN7002 CN2706 CD-L

8 DIFFL
FROM 22 1
SERVO/SYSTEM CONTROL CN7002 CN2706 CD-R
6 DIFFR
20 3
FROM/TO ASP CLK 18 SCL
SERVO/SYSTEM CONTROL
ASP DA 19 SDA
SA-AKX10PH/PN AUDIO BLOCK DIAGRAM
74
15.3. Power Amplifier
: AUDIO OUTPUT SIGNAL LINE
D-AMP P.C.B.
IC5900
C1BA00000497 30V 30V -30V
POWER AMPLIFIER
4 20 8 11
VDDA1
VDDA2
VDDP1
VSSP1
MAIN P.C.B. -30V 12
STABI
STABI
BOOT1
9
DRIVER
HIGH
SWITCH1 CONTROL
CN2711 CN5902 FR IN IN1+ INPUT PWM OUT1
10
JK5901 +
2 &
FROM AUDIO
3 10 STAGE MODULATOR RELEASE1
HANDSHAKE
1
JK5901
FRONT (RIGHT)
CN2711 CN5902 FL IN DRIVER -
1 12 2
LOW
MUTE
ENABLE1
TEMP. SENSOR PROT

OSC OSCILLATOR MANAGER 7 -30V
1 CURRENT PROTECTION
Q5902,Q5903,Q5905 VOLT. PROTECTION
CN2711 CN5902 MOD DA
ENABLE2
10 3 MUTING MODE BOOT2
23 MODE 15
CN2711 CN5902 MUTE F CIRCUIT
5 8
TH5900 DRIVER
5V HIGH
SWITCH2 CONTROL
IN2- INPUT PWM OUT2
14
JK5901 +
21 & 3
STAGE MODULATOR RELEASE2
HANDSHAKE
JK5901 -
FRONT (LEFT)
DRIVER
4
QR5900,QR5901 Q5901 LOW
MUTE
CN2711 CN5902 FHOP1
FROM/TO 6 7
SWITCH SWITCH
SERVO/SYSTEM CONTROL
VDDP2
VSSA1
VSSA2
VSSP2
VSSD
5V
6 18 17 13 16
-30V -30V 30V
CN2711 CN5902 DC DET

9 4
DC DETECT
Q5906,Q5907
SA-AKX10PH/PN POWER AMPLIFIER BLOCK DIAGRAM
75
15.4. Power Supply
IC5799
MIP2F20MSSCF T5751 SMPS P.C.B. MAIN P.C.B.
SWITCHING POWER SUB PANEL P.C.B.
SUPPLY CONTROL TRANSFORMER
CL 3 D5896
SYS3.3 CN5802 ZJ2701* CN2709 CN6002 VREF+
D5795 D5798 7
2 2 7 11
VREF
VCC 4 6
8
3.3V
10
Q2803 CN6001 CN6301

5 2 2
VREF
POWER
2 SUPPLY DVREF
1
REMOTE SENSOR P.C.B.
D 5 3
IC5899
C0DAEMZ00001 CN2709 CN6002 DVREF+
POWER 12 6
DVREF
SHUNT CONTROL
PC5799 REGULATOR
FEED BACK QR2802
FB 2 3 2 1 C R 2
CN2709 CN6002 CD 3.3V
6 12
3.3V
VDD 1 4 1
CN2709 CN6002 VP DET

5 13
PC5702 Q2705 T6101
SYNC SWITCH
CURRENT
SWITCHING
1 4
Q5898
LIMITER TRANSFORMER
AC INLET P.C.B. SYNC CN5802 ZJ2701* TO CN2709 CN6002 DC 18V
2 3 SWITCH 1 8 F-
1 1 SERVO/SYSTEM CONTROL 3 15
P5701 Q6101 9 F+
AC INLET F1
L5703
POWER SAVE
D6103
CONTROL 3 5 -VP
3 4 QR2701,QR2702
TH5702 PC5701
2 1 FEED BACK QR5810
DC DETECT D6101
DZ5701
3 2 INVERTER
4 1
QR5801
FROM SERVO/
SYSTEM CONTROL
POWER PCONT CN5802 ZJ2701*
PCONT
D5701 CONTROL 9 9
Q5860,Q5861,Q5862
TH5860 DC DET CN5802 ZJ2701*
DC DET PWR
TRANSFORMER 4 4
TEMP. DETECT
TO SERVO/
FOR PH SYSTEM CONTROL
T5701 QR5802
IC2701
MAIN C0CAAKG00046
DC DETECT
TRANSFORMER VOLTAGE
S5701 16
REGULATOR
VOLT ADJ
D5803
17
DC18V CN5802 ZJ2701* 1 IN OUT 3 VCC
CD SERVO P.C.B.
7,8 7,8
VOLTAGE CN2706 CN7002

Q2701
SELECTOR P.C.B. 4,15,16 7,8,19
3.3V
4
CN2706 CN7002
D-AMP P.C.B. REGULATOR 22 1
7.5V
5
D5804
13
D5802
+30V SENSE CN5801 ZJ5901* VDD
14 VDD
IC5701 5,6 5,6
D5726 D2711
C5HACYY00004...PN
15
C5HACYY00005...PH SWITCH
SWITCHING D5801
REGULATOR Q5721 7 11
-30V SENSE CN5801 ZJ5901* VSS
VSS
1,2 1,2
D 1 8
12
Q5720,Q5722 TO SERVO/
D5729 D5731 IC2702 SYSTEM CONTROL
CURRENT C0DAAYG00001
VCC 4 LIMITING 2 DC DET AMP
SWITCH SWITCHING
D5727 D5724
1 REGULATOR
OCP/BD 7
1 VCC OUT 2 5V
FB 6 USB P.C.B.
D2709 CN2704 P901
GND 3 21 21
3.3V
PC5720
DC DETECT CN2704 P901
FEED BACK 1 1
5V
4 1
QR2704
Q5803
FEED BACK AM BP CN5802 ZJ2701* FROM D-AMP P.C.B.

3 2 AMBP SWITCH
CIRCUIT 11 11 SERVO/SYSTEM CONTROL
CN2711 CN5902
IC5801 5V
FOR PH FOR PN 11 2
C0DABFC00002
SHUNT D2710
16 16
REGULATOR
17 17 Q2702
4 4 CURRENT 3.3V
CONTROL
5 5
13 13
14 14
6 6 CN2705 CN51
15 15 5 5
3.3V
7 11 7 11 TUNER P.C.B.
8 8
12 12
HOT COLD
2 2
1 1
SA-AKX10PH/PN POWER SUPPLY BLOCK DIAGRAM
76
16 Wiring Diagram
AUX
VOLUME 1 2 1
4
ZJ6001A* 3
2
JK2801 CN2705
9 1
8 2
2 8
1 9
VR6002 CN2711
C PANEL P.C.B. 1 2 3
TRACK
ZJ2701*
11 1
11
12
VR6001
(SOLDER SIDE)
3
2
2 1
1
22
CN2706
1
B MAIN P.C.B.
D
21 2 (SOLDER SIDE)
CD OPEN BUTTON P.C.B.
CN6001 (SOLDER SIDE)
4 1
CN6002
1 17 2 21
2 16 1 22 1 ZJ6001B*
17 1 2 PbF
16 2
CN2709
17
16
CN2707
2
8 2 CN2704 1
7 1
1 21
2 22
E REMOTE SENSOR P.C.B.
(SOLDER SIDE)
PbF
PbF
1 2 3 T6101
4
(SWITCHING CN6301 Z6301
9 5 FOR DEBUG
8 7 6 TRANSFORMER) 4 1
2 SENSOR
1 3
P5701
PbF AC IN
120V 60Hz...PN
110V-127V/
220V-240V
50/60Hz...PH
F TUNER P.C.B.
(SIDE B)
P901
PbF 8 2
P903 1 9 1
2
6
CN51
USB PORT
4
3
G USB P.C.B.
BLK JK52
JK51
2 (SOLDER SIDE) TL7*
1 2 1 1
5 RED
21 TL8* T5751
22
(SUB TRANSFORMER) AM ANT FM ANT
PbF 6
7
5
I SMPS P.C.B. 4
8
(SOLDER SIDE) 3
9
CN7001 11 1 2
12 2
A
10
1 2 CD SERVO P.C.B. CN7002
1
(SOLDER SIDE) 1 11
ZJ5901* (FOR PH ONLY)
22
21 2 12 1 T5701
(MAIN TRANSFORMER)
CN5902
9 10
J VOLTAGE SELECTOR P.C.B.
15 16 JK5901 8 11 (SOLDER SIDE)
6
4 7 12
3 PbF
SPEAKERS 6 13
2 RED BLK
2
1 1 H D-AMP P.C.B. 5 14 CN5802
TL6* S5701 TL5*
(VOLTAGE SELECTOR)
(SOLDER SIDE) 4 15
1
1 2 3
16
2 17
1 18 VOLT ADJ
11
PbF
OPTICAL PICKUP UNIT 6 1
CN5801 PbF
PbF
NOTE: " * " REF IS FOR INDICATION ONLY. SA-AKX10PH/PN WIRING CONNECTION
77
78
17 Schematic Diagram Notes • Voltage and signal line
: +B signal line
• This schematic diagram may be modified at any time
with the development of new technology.
Notes: : -B signal line
S5701: Voltage ADJ switch (For PH only).

S6001: Power switch ( ). : CD Audio input signal line
S6002: Stop ( -DEMO) switch.
S6003: AUX Switch
S6004: USB Play/Pause (USB / ) switch. : AUX input Audio signal line
S6005: D.BASS switch.
S6006: Manual EQ (MANUAL EQ) switch.
S6007: Forward ( / ) switch. : Audio output signal line
S6008: Rewind ( / ) switch.
S6009: Album + switch.
S6010: Album - switch. : USB signal line
S6011: CD switch ( ).
S6012: FM/AM switch.
VR6001: Volume Jog. : FM/AM signal line
VR6002: Track Jog.
• Important safety notice:
: AM signal line
Components identified by mark have special characteris-
tics important for safety.
: FM signal line
Furthermore, special parts which have purposes of fire-retar-
dant (resistors), high quality sound (capacitors), low-noise
(resistors), etc are used.
When replacing any of components, be sure to use only • For PH only
manufacturer’s specified parts shown in the parts list.
• In case of AC rated voltage Capacitors, the part no. and val-

ues will be indicated in the Schematic Diagram.
AC rated voltage capacitors:
For PN only:
C5701, C5703, C5704, C5705, C5708
For PH only:
C5701, C5703, C5704, C5705, C5706, C5707. C5708
• Resistor
Unit of resistance is OHM [Ω] (K=1,000, M=1,000,000).
• Capacitor • For PN only

Unit of capacitance is µF, unless otherwise noted. F=Farads,
pF=pico-Farad.
• Coil
Unit of inductance is H, unless otherwise noted.
• *
REF IS FOR INDICATION ONLY.
79
80
18 Schematic Diagram
18.1. CD Servo Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SCHEMATIC DIAGRAM - 1
A A
A CD SERVO CIRCUIT : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE

TP 14
6.3V33
C7601
C7670
C7626
R7601
D7650
0.1
0.1
4.7
MAZ80560ML
TP 16
Q7601
B B1ADCF000001 B
CN7001 LASER DRIVE
C7218
0.082
VCC 1 TP 19
R7217 C7227
F 2 1K 50V1
C7241
1000P
E 3
R7650 5.6 C7614
LD 4 6.3V100
C7225
1000P
LD GND 5
R7212
820
GND 6 TP 18
A 7
C7613 0.1
TO OPTICAL GND (GUARD) 8
PICKUP UNIT
C7226
1000P
B 9
TP 17
VREF 10 TP 28(VREF) C7217 R7218 C7228
LPD 11 0.1 C7231 1K 50V1
C 6.3V220 C
GND (GUARD) 12 R7221 100
T- 13
R7211 C7230
T+ 14 82K 0.1
F- 15
F+ 16
C7244
0.015 24
TP
TP 51(ARF) 13
TP
C7216
0
0
0
C7223 680P C7263 0.1
6.3V4.7
LB7264
LB7263
LB7262
D TP 90 D
C7161 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
0.1 C7234 CN7002
IREF
PLLF
PLLF0
OUTL
AVSS1
AVDD1
OUTR
DVSS3
NSRVMONON
EXT0 / SRDATA (ST_IN)
EXT1 / LRCK (ST_REQ)
EXT2 / BCLK (ST_CLK)
FLAG
TX
MCLK
MDATA
MLD
STAT
BLKCK
NRST
DQSYTXT
C7203 0.1 1
6.3V220 50 ARFFB DVDD2 76 22 LCH OUT
49 ARFOUT IODD1 77 21 A. GND
C7235
48 ARFDC DVSS2 78 20 RCH OUT
C7204 0.1 16V10
47 AVDD2 NTEST2 79 19 3.3V
C7102 0.47
TP 50 46 RFIN [51] ARFIN [74] SMCK X2 80 18 SRDATA (ST_IN)
45 RFOUT [52] DSLF [75] PMCK
X1 81 17 LRCK (ST_REQ)
C7142 3300P 12
44 RFENV NTEST 82 TP 16 BCLK (ST_CLK)
C7107 0.022 7
43 CENV D2 83 TP 15 TX
8
42 LD
41 PD
D1 84
D0 85
9
TP
TP 14
13
MCLK
MDATA TO B
TP 4 MAIN CIRCUIT
E 40 A D3 86 12 MLD E
39 C IC7001 D4 87
31 R7253 10 TP 3
11 STAT
(CN2706)
TP
38 B MN6627954AMA D5 88 10 BLKCK
IN SCHEMATIC
SERVO PROCESSOR R7254 1K
37 D D6 89 9 RST
DIAGRAM - 3
6.3V220
C7253
C7233
C7166
C7232
470P
36 F D7 90 8 3.3V
0.01
0.1
35 E TP 2
D15 91 7 LD SW
34 VREF D14 92 6 D. GND
R7111
10K 33 CTRCRS DRVDD 93 5 REST SW
0.1
32 OSCIN D13 94 S7201 4 LOADING
REST SW
31 AVSS2 [24] TRP [1] A9 D12 95 3 CD OPEN SW
C7264
R7327 R7349 [25] FOP [2] A11
1K 18K TP 88 30 SRVMON1 S7202
D11 96 2 P. GND
R7336
CD OPEN
10
TP 89 29 SRVMON0 D10 97 R7220 1 7.5V
PRAMVDD15
PRAMVDD33
GND1
PRAMVSS33
C7154 0.1 22
28 DVDD1 1M C7243
F D9 98 F
C7155 0.1 0.1
SPOUT
TRV GAIN
R7329 27 IODD2 D8 99
NRAS
NCAS
FO GAIN
TRVP
R7214
NWE
470
BA1
BA0
1K
A10
26 DVSS1 SDRCK 100
PC
X7201
A0
A1
A2
A3
A4
A5
A6
A7
A8
H0H169500013
R7330
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C7352
R7328
R7339
0.018
5.6K
C7339
0.018
1K
10K
15 16 17 18 19 20 21 30 22 23 24 25 26 27 28
C7335
TP 1
D3-
D3+
D4-
D4+
PVCC1 PVCC2
PGND1 PGND2
NC
NC
NC
NC
VCC
VREF
IN4
IN3
GND
0.1
15P
TP TP
87 86
C7222
15P
C7221
C7338
0.027
C7334
GND
PC1
PC2
10
10
D2+
D1+
10V220
D2-
D1-
IN1
IN2
NC
NC
NC
NC
C7315
0.47
C7164
C7165
14 13 12 11 10 9 8 29 7 6 5 4 3 2 1
R7323 R7331
6.8K 27K
G G
IC7002
BA5948FPE2 R7325
330
R7315
3.3K
DRIVER
R7335 R7332
100 1K
TP 11
TP 10
TP 39 TP 38 TP 36
TP 37
H SA-AKX10PH/PN CD SERVO CIRCUIT H
+ +
M7301* M7302*
TRAVERSE MOTOR SPINDLE MOTOR
1 2 3 4 5 6 7 8 9 10 11 12 13 14
81
18.2. Main Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
B MAIN CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUX AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : AM/FM SIGNAL LINE
P1
USB_TE
USB_IRQ
USB_VE
CD_BLKCK
CD_OPEN_SW
CD_LOADING
B0ACCK000012 CD_REST_SW
CD_RST
CD_STAT
CD_MLD
CD_MDATA
CD_MCLK
EE_DAT
EE_CLK
EE_CS
PCONT
DC_DET_PWR
DVREF+
EE_CS
EE_CLK
EE_DAT
TXD
CN2707
8 TXD
RXD
B IC2802 7 RXD
C3EBFY000006 CLK
6 CLK
EEPROM
AGND R2130 0 5 EFM
FOR DEBUG
1.5K B0ACCK000012
R2825 47K BUSY
4 BUSY
D2802
D2801
R2826 47K R2874 1 CS VCC 8 3 VCC
10K CNVSS
R2827 10K 2 SK NC 7 2 CNVSS
C2816 RESET
3 DI TEST 6 0.022 1 /RESET
330P
330P
4 DO GND 5
1.5K
22K
22K
100
100
100
100
100
100
R2894
1K
1K
1K
1K
1K
1K
1K
1K
10K
R2890
C2811
R2892
C2812
R2836
R2838
R2842
R2849
R2851
R2852
R2854
R2855
R2858
R2860
R2862
R2863
R2864
R2866
R2869
R2871
C2804
0.1
C
R2875 R2887 R2888
47K 3.9K 3.9K
R2817
10K 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
TERR
USB_REQ
WR_START
VERR
NC
NC
BLKCK
NC
NC
NC
NC
NC
NC
HEADPHONE_SW
NC
CD_OPEN_SW
CD_LOAD(L)(TRV_CCW)
VSS
CD_LOAD(H)(TRV_SW)
VCC
/RESET_SW(INNER_SW)
CD_RST
STATUS
MLD
MDATA_OUT
MCLK
EE_DAT
EE_CLK
EE_CS/EFP/EPM
PCONT/EFP/CE
ME
81 50
FL_CLK R2828 100 R2880 100 AM_BP
82 49
FL_DA R2829 100
83 NC 48 VREF+
FL_CS R2830 100
84 FL_CS NC 47
CLIP_ATTN SYS3.3V
85 CLIP_ATT NC 46
CLIP_S
86 CLIP_SENSOR [51] DCDET_PWR NC 45
R2816 [81] MMOD0 [50] NC
1.2K...PH 87 NC NC 44
ROTARY_JOG [82] FL_CLK [49] SMPS_BP
D 0...PN R2831 100
88 ROTARY_JOG [83] FL_DOUT NC 43
89 REG NC 42
V_JOG_A R2821 1K
90 VOL_JOG IC2801 NC 41
R2815 3.3K RFKWMAKX10PN
91 CS NC 40
92 NC MICRO PROCESSOR NC 39
[98] VREF D2804
KEY2 R2824 100 B0BC5R1A0266
93 KEY2 [99] AVCC [30] USB_SDA(TXD) NC 38
KEY1 R2822 100
94 KEY1 [100] DEMO_SEL [29] USB_SCL(RXD) NC 37
R2881 100 ASP_CLK
CNVSS EFP_CNVSS
95 BASS_JOG1 ASP_CLK 36
R2882 100 ASP_DA
96 AVSS ASP_DAT 35
BUSY
DCDET_DAMP
TUNER_DATA
97 BASS_JOG2 BUSY 34
TUNER_RST
TUNER_CLK
TUNER_INT
R2884 100 CLK

MODE_DA
98 USB_RST(CLK) 33
RXD
MUTE_A
MUTE_F
R2885 100
/RESET
XCOUT
F_HOP
99 RXD 32
XOUT
SYNC
BYTE
TXD
XCIN
E R2886 100
RMT
VCC
/NMI
VSS
100
XIN
TXD 31
NC
NC
NC
NC
NC
NC
NC
USB_RST
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
47K
10K
22K
10K
22K
100
100
100
100
100
100
100
100
100
100
0.1
1K
R2834
R2835
R2839
R2840
R2841
R2843
R2846
C2803
R2856
R2857
R2859
R2865
R2867
R2868
R2870
R2872
R2873
CD3.3V Q2803
R2850 R2883 C2805 C2806 B1ACKD000006
1M 6.3V220
F QR2832 47K 0.1 POWER SUPPLY
B1GDCFGG0026 QR2801
SWITCH
R2853 B1GBCFLL0037
220 RESET R2893
C2810 R2889 470K
F_HOP2 3 50V3.3 4.7K
H2B100500004
1
X2802
B0ACCK000012
R2891
C2807
2 1K QR2802
B1GBCFLL0037
D2803
R2878 15K
POWER CONTROL
QR2831 1
R2879 10K PCONT
B1GDCFGG0026
SWITCH R2810
22K R2848 C2801 R2877 15K DRVREF+
0 18P TO MAIN
F_HOP1 SECTION (2/4)
H0A327200097
G
X2801
DC_DET_AMP
R2847
10M
TUN_GP102
TUN_SCLK
TUN_SDIO
USB_SDA
TUN_RST
USB_SCL
C2802
MOD_DA
MUTE_F
CNVSS
22P
RESET
DGND
SYNC
RMT
1/4 2/4
TO MAIN
SECTION (3/4)
3/4 4/4
H SA-AKX10PH/PN MAIN CIRCUIT
82
15 16 17 18 19 20 21 22 23 24 25 26 27 28
A
P1
R2101 IC2101 JK2801

3.3K
CD-L C1BB00001151 B
ASP
C2143 R2105 1
22
CN2706 1000P 6.8K R2005
LOUT 1 47K [LCH]
1 INR1 ROUT 32 ROUT AUX-L
C2144 R2102 R2108 2
AGND 2 1000P 3.3K 6.8K C2113 1 LOUT
CD-R TU-R 2 INR2 LOUT 31 C2004 C2002
ROUT 3 C2118 0.15
100P 1000P AUX IN
CD3.3V 3 INR3 BASSR2 30
3.3V 4 0.22
L2140 AUX-R C2109 1 C2119 R2113 C2007 C2003
4 INR4 BASSR1 29 2.7K 100P 1000P
SRDATA 5 G0C470JA0055 C2120 3300P AUX-R [RCH]
5 INR5 TRER 28 3
LRCLK 6 CD-R C2107 10 C2125 3300P R2006 C2001
BLCK 7 6 DIFFR TREL 27 47K 0
C2817 50V4.7
7 DIFFG BASSL1 26 C2124 0.22 4 GND
TX 8 CD-L C2115 10 C2123 0.15
CD_MCLK 8 DIFFL BASSL2 25 R2114
TO A MCLK 9
MDATA 10
CD_MDATA 9 INL5 VOLINR 24
C2121 50V2.2 2.7K
CD SERVO CD_MLD AUX-L C2108 1

MLD 11
10 INL4 IGOUTR 23
C2126 50V2.2
C
CIRCUIT (CN7002) CD_STAT 11 INL3 VOLINL 22
STAT 12 TU-L C2114 1
IN SCHEMATIC CD_BLKCK 12 INL2 IGOUTL 21
BLKCK 13 DGND
DIAGRAM - 1 RST 14
CD_RST 13 INL1 DGND 20
ASP_DA
14 AGND SDA 19
3.3V 15 C2145 ASP_CLK
6.3V220 C2005 15 REFIN SCL 18
LD_SW 16 1000P
GND 16 VCC CEXT 17 C2122 0.22
DGND 17
CD_REST_SW C2129 C2127 C2128
REST_SW 18 16V10 0.01 16V220
R2009 3.3K CD_LOADING
LOADING 19
CD_OPEN_SW AGND TUN_GP102
CN2705 9
CD_OPEN SW 20 1 GP102
MOTOR_GND TUN_RST
PGND 21 2 REST
TUN_SCLK
1 +7.5V 22
CD+7.5V
TUN_SDIO
3 SCLK TO F
4 SDIO TUNER CIRCUIT D
C2008 5 +3.3V
0.1 D2709 (CN51)
CN2704 B0ACCK000012 DC_DET_AMP
TU-R
6 RCH IN SCHEMATIC
D5V 1 7 GND
USB+5V C2101 DIAGRAM - 7
DGND 2 0.01
USB_SCL 8 LCH
USB_SCL 3 9 GND
USB_VE 1
Verify.error 4
USB_IRQ C2102
USB_IRQ 5 0.01
USB_SDA
USB_SDA 6 TU-L
100P
100P
4.7K
4.7K
10K
DGND 7
CD_CLK 8
G DGND 9
C2819
C2820
R2805
R2809
R2812
TO CD_STAT 10
USB CIRCUIT E
CD_DATA 11
(P901) DGND 12
DVREF+
IN SCHEMATIC STCLK 13
DIAGRAM - 8 USB_TE
Timeout.error 14
STREQ 15
STIN 16
CD_MLD 17 C2818
CD_RST 18 100P
USB_RST
USB_RST 19
R2802 100K
DGND 20
D3.3V 21
ME
Mmodo.error 22
F
TO MAIN
SECTION (1/4)
G
1/4 2/4
TO MAIN
SECTION (4/4)
3/4 4/4
P1
AA
SA-AKX10PH/PN MAIN CIRCUIT H
83
I
TO MAIN
SECTION (1/4)
P1
J
R2312
1K CN2711 12
R2220 FRONTL
2.2K 1 FRONTL
Q2302 2 SIGNAL A_GND
B1ABCF000176 FRONTR
3 FRONT R
SWITCH R2221 C2223 R2223
4.7K 16V100 K2706 4 AGND
C2310
0.015
R2310
100K
MUTE_F 0
5 MUTE F_SW (MODE 2) TO H
2.2K F_HOP1
Q2220 6 FHOP1
D-AMP CIRCUIT
C2301 R2307 C2203 R2205 R2208 C2405 C2220 C2221 B1ABCF000176 C2222 R2303 F_HOP2
7 FHOP2
(CN5902)
10 2.2K 1 5.6K 27K 10 0.22 0.18 AMP 10 100
LOUT FRONTR
8 ECO / FAN IN SCHEMATIC
DC_DET_AMP DIAGRAM - 9
C2205 C2207 9 DC_DET1
R2313 47P 560P R2229 MOD_DA
100K 2.7K 10 MOD_DA
K C2307 USB+5V
11 +5V
0.1
R2224 GND
1K Q2221 12 +5V GND
1
4 3 2 1
R2230 R2222 B1ABCF000176 R2305
56K 4.7K SWITCH 330
AGND GND
R2314 R2201 C2201 R2203
100K 1K 10V100 0 IC2201
C0AABB000125
OP-AMP
R2231 R2226 R2228
VCC 56K 4.7K 1K Q2223 R2306
330
R2204 5 6 7 8 R2225 B1ABCF000176
0 2.7K SWITCH
R2202
1K C2308
C2204 C2206 Q2222 0.1
L C2302 R2308 C2202 R2206 47P 560P C2402 C2224 C2225 B1ABCF000176 C2226 R2304
10 2.2K 1 5.6K 10 0.22 0.18 AMP 10 100
ROUT FRONTL
R2207
27K
R2227
100K
C2309 R2309
0.015 2.2K
R2602 D2602 C2602 R2604
22K B0ACCK000012 50V1 22K
CLIP_S
Q2301
B0ACCK000012
B1ABCF000176
D2603
SWITCH
M R2601
4.7M
C2601
50V2.2
C2603
0.012
R2605
100K
R2311
1K
1
R2611 D2605 C2607 R2606

22K B0ACCK000012 50V1 22K R2791
Q2790 2.2K
PCONT
B1ABCF000176
SWITCH
R2790
B0ACCK000012
2.2K
USB+5V
D2604
C2608 C2605 R2608

50V2.2 0.012 100K TO MAIN
N SECTION (4/4)
D2790
B0ACCK000012
CLIP_ATTN MUTE_F
1/4 2/4
3/4 4/4
P SA-AKX10PH/PN MAIN CIRCUIT
1 2 3 4 5 6 7 8 9 10 11 12 13 14
84
I
AA
P1
TO MAIN
SECTION (2/4)
J
P1
D2711
QR2701 B0ADCJ000020
B1GBCFJJ0051 D2120 K
DC DETECT 1
B0EAKM000117
3
2
R2772
12K
IC2701
C0CAAKG00046
Q2701 D2706
B0EAKM000117
VOLTAGE REGULATOR ZA2701*
B1BACG000023
REGULATOR
CD+7.5V
OUT GND IN
C2706 G1 G2
0.01 R2702 D2707 D2708 3 2 1
R2701 390 B0EAKM000117 B0EAKM000117
100
QR2702 L
17
CN2709 B1GBCFJJ0051 ZJ2701*
C2702 C2704 D2704 C2708 C2711 C2712 C2716 C2717 AM_BP
NC 1 DC DETECT 0.1 10V33 B0BC8R2A0266 16V47 0.01 16V47 0.01 25V330 11 AM_BP
NC 2 MOTOR_GND 10 NC
PCONT
DC 18V 3 9 PCONT
FL-GND 4 R2773
15K
R2774
22K 8 DC18V TO I
VP DET 5 7 DC18V SMPS CIRCUIT
CD3.3V
CD3.3V 6 6 +18V.-12V_GND (CN5802)
TO C VREF+ 7
VREF+
FL_CLK DC_DET_PWR
5 +18V.-12V_GND IN SCHEMATIC
PANEL CIRCUIT FLCLK 8 4 DCDET2 DIAGRAM - 10
(CN6002) DGND 9 3 NC
FL_DA SYS3.3V
IN SCHEMATIC FL_DOUT 10
FL_CS
C2720 0.01 2 SYS3.3V
SYNC
DIAGRAM - 6 FL_CS 11 R2718 2.2 1 SYNC
DVREF+ 12
DVREF+ M
ROTARY_JOG R2719 2.2
ROTARY JOG 13 R2720 2.2
V_JOG_A
J_VOLA 14
D2710 R2721 270
KEY2 15
KEY2
B0ACCK000012 IC2702
KEY1 16
KEY1
Q2705 C0DAAYG00001
QR2704 SWITCHING REGULATOR
RMT 17
RMT B1ADCE000012 B1GBCFJJ0051
STBY
1
GND
CURRENT LIMITER
OUT
VCC
DC DETECT
INV
USB+5V R2710 5 4 3 2 1
1M
Q2702
L2801
B1AAJC000019 L2702
G0A220GA0002 CURRENT CONTROL G0A101ZA0028
TO MAIN
SECTION (3/4) R2706 N
C2707 R2704 1.5K R2708 C2714
0.47
B0JCPD000025
0.01 1K 2.7K
DZ2701
C2715 C2718 C2719
6.3V820 25V330 0.01
C2146 C2701 C2703 C2705 R2705
6.3V220 0.01 16V47 16V47 4.7K R2707 C2713
1K 0.01
E2701
1 2 3
GND
AGND
DGND
1/4 2/4
3/4 4/4
SA-AKX10PH/PN MAIN CIRCUIT P
15 16 17 18 19 20 21 22 23 24 25 26 27 28
85
18.3. Panel Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A A
C PANEL CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE
B B
KEY1
KEY2
S6001
POWER R6001
1.2K FL6001
S6006 R6006
1.2K
A2BB00000171
MANUAL EQ FL DISPLAY
S6002
STOP/-DEMO R6002 S6007 R6007
1.5K 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
C FORWARD 1.5K C
GR10
GR11
GR12
SG16
SG15
SG14
SG13
SG12
SG11
SG10
GR1
GR2
GR3
GR4
GR5
GR6
GR7
GR8
GR9
SG9
SG8
SG7
SG6
SG5
SG4
SG3
SG2
SG1
S6003 S6008 R6008
R6003 REWIND 2.2K
AUX
2.2K
GR1
GR2
GR3
GR4
GR5
GR6
GR7
GR8
GR9
S6009 R6009
ALBUM + 3.3K
S6004
USB R6004
3.3K C6003 C6013
PLAY/PAUSE 0.1 0.1
S6010 R6010
ALBUM - 4.7K
TO D S6005
D.BASS S6011 R6005 44 43 42 41 40 39 38 37 36 35 34
CD OPEN BUTTON ZJ6001A* CD PLAY/PAUSE 6.8K R6105
D D
VDD
G1
G2
G3
G4
G5
G6
G7
G8
G9
GR10 6.8K
DGND 2 1 P0 33 R6025 C6014
CIRCUIT (ZJ6001B*) GR11 22K 50V22
KEY2 1 S6012 2 P1 G11 32
IN SCHEMATIC FM/AM GR12 D6101 D6104
3 P2 G12/S17 31
DIAGRAM - 7 B0BC024A0269 B0EAMM000057
4 P3 [44] VSS [33] G10 VEE 30 R6101 C6102
R6017 82K SG16 L6001 47K 50V47 D6103
5 OSC S16 29 J0JBC0000019 D6105
B0EAMM000057 4
6 NC IC6001 S15 28
SG15
5 3
B0BC036A0264
FL_DOUT R6014 220
7 DIN
C0HBB0000061 S14 27
SG14
TO E CN6001 FL_CLK R6015 220

8 CLK
FL DISPLAY DRIVER
S13 26
SG13
6 2
REMOTE SENSOR NC 4 FL_CS R6016 470
9 STB S12 25
SG12 D6001
B0BC2R4A0263
Q6101
CIRCUIT (CN6301) RMT 3
RMT [12] VSS [22] S9 SG11 B1BABK000001
10 K1 S11 24 7 1 POWER SAVE CONTROL
330P
330P
330P
VREF+ SG10
IN SCHEMATIC VREF+ 2
VDD
11 K2 S10 23 R6021 T6101 8 9
S1
S2
S3
S4
S5
S6
S7
S8
DGND
DIAGRAM - 7 DGND 1 10 G4DYA0000214
E 12 13 14 15 16 17 18 19 20 21 22 SWITCHING TRANSFORMER E
C6004
C6005
C6006
VR6002 R6106 1
R6103 C6104
K9AA012Y0004 0 50V47
TRACK JOG C6101
C6007 0.01 16V100 D6102
B0JAME000114
R6108 1
SG1
SG2
SG3
SG4
SG5
SG6
SG7
SG8
SG9
R6028 1K R6102 C6103
47 3300P
1 2 3 R6023
22K ROTARY_JOG L6101
G0A220GA0002
R6022 R6024
12K 10K
R6012 10K CN6002 17

C6011 C6012 RMT
100P 100P 1 RMT
F KEY1
2 KEY1
F
KEY2
3 KEY2
VR6001 J_VOLA
EVEKE2F3524B 4 J_VOLA
VOLUME JOG DVREF+ ROTARY_JOG
5 ROTARY JOG
C6008 R6019 R6018 DVREF+
6 DVREF+
3 100P 22K 10K FL_CS
7 FL_CS TO B
2 FL_DOUT
8 FL_DOUT MAIN CIRCUIT
1 C6009 R6020
100P
DGND
9 DGND (CN2709)
12K J_VOLA FL_CLK IN SCHEMATIC
10 FL_CLK
VREF+ DIAGRAM - 5
C6010 11 VREF+
1000P 12 CD3.3V
13 VP DET
G 14 FL_GND G
15 DC 18V
R6013 10K
16 NC
17 NC
1
H SA-AKX10PH/PN PANEL CIRCUIT H
1 2 3 4 5 6 7 8 9 10 11 12 13 14
86
18.4. CD Open Button, Remote Sensor & Tuner Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A A
D CD OPEN BUTTON CIRCUIT E REMOTE SENSOR CIRCUIT : +B SIGNAL LINE
R6201
4.7K C CN6301
TO C ZJ6001B*
TO DGND 1
PANEL CIRCUIT PANEL CIRCUIT VREF+ 2
(ZJ6001A*)
DGND 2 S6201 (CN6001) RMT 3 C6303 C6302
OPEN/CLOSE C6301
KEY2 1 IN SCHEMATIC 100P 50V22 1000P 3 Z6301
IN SCHEMATIC NC 4 B3RAB0000084
DIAGRAM - 6 2 REMOTE CONTROL SENSOR
B DIAGRAM - 6 1 B
C C
D D
F TUNER CIRCUIT : +B SIGNAL LINE : AM SIGNAL LINE : FM SIGNAL LINE : AM/FM SIGNAL LINE
R59 2.2K
E E
H0A327200097
JK51 C58 22P
IC52
X51
20 19 18 17 16
G3 VUEALLPT031 T1
CN51
GCGPO1
DFS
GCGPO2
DCLK
9
NC
VA51 FM/AM RADIO RECEIVER

C51 L51 C57 22P
EZAEG2A50AX 1000P G1CR18JA0020 1 NC DOUT 15 1 GND
FM ANT C59 1 R51
G2 2 FMI LOUT 14 2 L OUT
FM ANT 1K
LB51
3 RFGND
Thermal
Pad
ROUT 1 3
C60 1 R52
3 GND TO B
G1
J0JBC0000032 4 AMI GND 1 2
1K
4 R OUT MAIN CIRCUIT
VDD 1 1
RCLK
SCLK
5 3.3V (CN2705)
SDIO
5 RST
SEN
VIO
GND
C61 6 SDIO IN SCHEMATIC
6 7 8 9 10 0.1 7 SCLK DIAGRAM - 3
L52 8 RST
R64
G2A380Y00001 0 9 INT
F 1 F
G2
47K
47K
JK52
AM ANT 2 3 4 R53
AM ANT C52 4.7K
R54
AM ANT 1 4.7K
R62
0.47 R61
R55 220
2
R56 220
1 6
G1 R57 1K
C62
0.1
G G
H SA-AKX10PH/PN CD OPEN BUTTON / REMOTE SENSOR / TUNER CIRCUIT H
1 2 3 4 5 6 7 8 9 10 11 12 13 14
87
18.5. USB Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A A
G USB CIRCUIT : +B SIGNAL LINE : USB SIGNAL LINE
R972 1K
R971 1K
R950
0
B B
C914
C951
0.1
0.1
16V10
C931
C952
0.1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 R957
DGND 2.2K
USB_CTRL
P73/D5
P72/D4
P71/D3
P70/D2
P67/D1
P66/D0
P00
P01
P02
P03
P04
USB_POWER
OCD_SCL
OCD_SDA
VPP
R902
1K
33 P75/D7 MMOD1 16
DGND
34 P81/D8 MMOD0 15
R904
0
35 P82/D9 NRST 14
C C
36 P83/D10 VSS 13
R901
1K C908 22P
37 P84/D11 OSCO 12
C911 X900
0.1 H0A120500009 C907 18P
38 VDD33 OSCI 11
39 P85/D12 VDDI 10
DGND
40 VSS IC900 VDD33 9
R914
0
41 P86/D13
MNZSFB5KJM2 8 LB952 P903
CD_NRST 5
D C912 USB CONTROLLER L900 0 D
0.1 G1C100K00019 1 VBUS G
42 VDDI AVDD 7
R952 24
2 D-
43 P87/D14 USBD+ 6
R953 24 USB PORT
R906 3 D+
0
44 P40/D15 VSS 5 4 VSS G
LB951
0 6
45 P77/NRE USBD- 4
DGND
46 I2C_CLK/WR_END USBNPP 3
0.1
16V10
C915
C902
C905
C906
C904
0.1
0.1
47
10
47 I2C_REQ/WR_START USBNOC 2
C901
E E
6.3V100
R954
R955
C953
15K
15K
DGND
48 I2C_DATA/ERROR PD6/IRQ3 1
PD4/NCE2
P21/NCE0
CD_DATA
CD_STAT
P91/SBIO
CD_MLD
CD_CLK
STREQ
STCLK
VERR
TERR
VDD5
VDDI
STIN
VSS
PA7
DGND
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
DGND
R907
0
F P901 F
C913
C903
0.1
0.1
1 D5V
2 DGND
3 I2C_CLK
4 VERR
5 I2C_REQ
6 I2C_DATA
7 DGND
8 CD_CLK
DGND
9 DGND
10 CD_STAT TO B
11 CD_DATA
MAIN CIRCUIT
G 12 DGND
(CN2704) G
13 STCLK
IN SCHEMATIC
14 TERR
DIAGRAM - 3
15 STREQ
16 STIN
17 CD_MLD
18 CD_NRST
19 M_NRST
20 DGND
21 D3.3V
22 MMOD
H
R958
100K
R903
0
LB852
0 SA-AKX10PH/PN USB CIRCUIT H
DGND DGND
1 2 3 4 5 6 7 8 9 10 11 12 13 14
88
18.6. D-Amp Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A A
H D-AMP CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE
IC5900
C1BA00000497
POWER AMPLIFIER
SGND1
SGND2
BOOT1
BOOT2
VDDA1
VDDP1
VDDP2
VDDA2
VSSA1
VSSP1
VSSP2
VSSA2
MODE
STABI
PROT
VSSD
OUT1
OUT2
OSC
IN1+
IN2+
IN1-
IN2-
B B
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
C5918 C5921 C5923 C5924 C5928 C5933

330P 0.1 0.1 33P 0.015 0.015
C5930
0.47
C5938 C5939 C5943 TH5900
0.1 0.1 330P D4CC11040013
R5911
R5914
5.6K
5.6K
R5924
R5925
R5926
5.6K
5.6K
100
C5927 R5921 R5922 C5935
220P 10 10 220P
C5934 C5947
0.1
0.1
0.1
0.1
220P 1000P
C5931
C5915
C5919
C5941
C5944
0.47
0.47
0.47
0.47
0.1
0.1
C5925
C5926
C5936
C5937
C5929
220P
C C
C5932
C5917 C5942 C5946
1000P 1000P 16V10
R5917
10
C5956 GND
L5901 D5903
ZJ5901* J0JKB0000020
0 B0HCSP000001
TO I VDD 6
VDD 5 C5903 C5905 C5907 C5909
SMPS CIRCUIT 0.1 0.1 50V220 0.1
GND 4
(CN5801) C5904 C5906 C5908 C5910 D5904 L5904
IN SCHEMATIC
GND 3
0.1 0.1 50V220 0.1 B0HCSP000001 G0B9R5K00005
G2 JK5901
VSS 2 4 FL-
DIAGRAM - 10 L5902 C5920
VSS 1 J0JKB0000020 1 2 3 FL+
D 100V22
TO SPEAKERS D
R5931 2 FR-
22
R5905 C5948 R5933 1 FR+
10 3 4 0.68 5.6K
C5950 3 4 G1
0.1
C5951
1 2 0.1
C5949 R5934
0.68 5.6K
L5903 R5932
G0A150L00003 22
1 2
C5901 C5902
1 CN5902 1000P 1000P
FL_IN 12
3 4
SGND 11
E E
0.1
0.1
0.1
0.1
FR_IN 10 L5905
G0B9R5K00005
AGND 9
B
C5952
C5953
C5954
C5955
TO MUTE_F 8 D5905
MAIN CIRCUIT FHOP1 7 B0HCSP000001
(CN2711) FHOP2 6
IN SCHEMATIC ECO / FAN 5 D5906
DIAGRAM - 4 B0HCSP000001
DC_DET 4
MOD_DA 3
+5V 2
R5907
12
+5V GND 1 QR5901 27K Q5907 R5927
B1ABCF000176 82K
B1GDCFJJ0047
SWITCH DC DETECT
R5901 R5906 R5909
F 120K 180K 33K F
QR5900 R5910
1.5K Q5906 R5928
B1GBCFJJ0051 Q5901 B1ABCF000176 82K
SWITCH B1ABGC000005 DC DETECT
SWITCH
R5935 R5923 C5945
10K 6.8K 10V100
R5913
2.7K
R5904 Q5902
10K B1ADCE000012
SWITCH
G R5918
2.7K G
Q5903 R5908
R5903
B1ABCF000176 10K
10K SWITCH
R5915
10K Q5905
B1ABCF000176
SWITCH
H SA-AKX10PH/PN D-AMP CIRCUIT H
1 2 3 4 5 6 7 8 9 10 11 12 13 14
89
18.7. SMPS Circuit
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
I SMPS CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE
P1
FOR PN FOR PH
B
10 9 10 9
-30V DRAIN -30V DRAIN

11 8 11 8
12 7 12 7
AMPGND AMPGND
13 6 13 6
14 5 14 5
+30V +30V
15 4 15 4
+FAN 18V VIN +FAN 18V VIN
C GND GND
16 16
CN5801 3 3
H +30V_SENSE 6 Q5862 D5801 VCC VCC

TO B1GBCFJJ0051 B0ABSM000008 17 2 17 2
+30V_SENSE 5 C5831 R5862 R5863 +18V +18V
D-AMP CIRCUIT 0.1 18K 18K TRANSFORMER TH5860
GND 4 D4CC11040013
(ZJ5901*) TEMP. DETECT
18 1 18 1
GND 3 R5860 R5861
IN SCHEMATIC C5832 Q5860 4.7K
-30V_SENSE 2 10K
DIAGRAM - 9 0.1
-30V_SENSE 1
B1ADCF000001 Q5861 1 2 3 T5701
TRANSFORMER
TEMP DETECT. R5864
B1ABCF000176 C5869 ETS39AG4M6AD...PH
TRANSFORMER 0.1
10K C5870 TEMP. DETECT ETS39AG4NGAD...PN
0.1 MAIN TRANSFORMER 2
R5702 R5703 C5713
10 9 100K...PH 100K...PH
D 0.01
0.01
0.01
33K...PN 33K...PN
C5805 11 8
R5800 R5841 R5836 R5832 R5833 50V1000
C5821
C5820
15K 120K 2.2K 2.2K 2.2K 3
FOR PH 12 7 TO SMPS
D5702 SECTION (2/2)
0.01
0.01
13 B0ZAZ0000052
6
R5840 C5843 R5837 R5834 R5835 C5808
50V1000 1 2
82K 10 2.2K 2.2K 2.2K
R5801
C5819
C5822
C5844 14 5
22K
10
15 4
QR5801 3
B1GBCFJN0038 D5804
QR5802 16 3
R5724
D5726
POWER CONTROL B0ACCK000012 120
E B1GDCFGA0018 3 2 1 R5720 B0EAKM000117
22
DC DETECT
17 2
CN5802 D5731 R5723
AM_BP 11
AM_BP D5802 D5803
B0EAMM000057 1K Q5721
B0ABSM000008 B0HFRJ000012
NC 10 18 1 D5721
B1ADCF000001
PCONT SWITCH
PCONT 9 B0BC010A0007...PH L5704
TO B DC18V 8
C5813
35V330
B0BC018A0267...PN J0JBC0000019
R5732
100
MAIN CIRCUIT DC18V 7 C5812
0.1 Q5720
(ZJ2701*) +18V.-12V_GND 6 B1BABG000007
IN SCHEMATIC +18V.-12V_GND 5 CURRENT D5729 IC5701
C5826 C5800 LIMITING SWITCH
DIAGRAM - 5 DCDET 4 0.01 0.01
B0EAMM000057 C5HACYY00004...PN
NC 3 C5896
PC5720 C5HACYY00005...PH
0.1 SYS3.3 B3PBA0000402 Q5722 R5722 D5727 SWITCHING REGULATOR
SYS3.3 2 1.2K
F SYNC GND
R5809 R5807 FEED BACK B1ABCF000176 B0ACCK000012
SYNC 1 330 330 R5721 CURRENT 7 OCP/BD
10K LIMITING SWITCH D5724
1 4
R5808 B0ACCK000012
6 FB
2.2K D5728
K1...PN 2 3 B0ACCK000012
0 C5720
R5821 R5822 R5823 R5824 5 OLP/SS
R5802 C5810 0.1 C5725 C5723
470 470 470 470 12K 0.1 C5730
K3...PH 0.1 470P 1
0 IC5801 4 VCC
R5825 R5826 R5827 R5828 C0DABFC00002 R5730 C5728 C5726
1K 1000P 0.1
B0BC035A0007
470 470 470 470 SHUNT REGULATOR
C5817 R5803 3 GND
100V0.1 1K
D5732
1 C C5724 R5733
100K
D5722 50V56 47K
10K
Q5803 R5814 R5804 R5806 B0BC019A0007 2 S
AM_BP 8.2K 47K 15K
B1BABG000007 C5721 C5722
R5820 3 220P 1000P
AMBP SWITCH C5818 A
G D5723
R5728
R5729
10K 1 D
0.1 B0ACCK000012 C5737...PH
2 820P
R
R5805 4
2.2K PC5701 C5727...PN R5726
B3PBA0000402 D5725
B0BC6R100010 3300P 0.1...PH
FEED BACK 0.15...PN
1 4 R5727
R5817 R5810 0.13
330 330
QR5810 2 3
B1GBCFLL0037 FOR PN
INVERTER
PCONT
1/2 2/2
H SA-AKX10PH/PN SMPS CIRCUIT
1 2 3 4 5 6 7 8 9 10 11 12 13 14
90
15 16 17 18 19 20 21 22 23 24 25 26 27 28
A
I SMPS CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE
F1 L5703
T6.3AL 250V...PH G0B612H00002
P5701 8A 125V...PN
3 4 B
R5708
AC IN ZA5701 ZA5702 1.5M C5701
120V 60Hz...PN DZ5701 R5709 F0CAF334A105 TH5702
110V~127V/220V~240V 50Hz/60Hz...PH ERZV10V511CS 1.5M 0.33 D4CAA2R20001
2 1
C5707 C5706 FOR PH

C5705 C5704 F1BAF1020020 F1BAF1020020
F1BAF1020020 F1BAF1020020 1000P 1000P
1000P 1000P
GND GND
3
C
P1
PC5702
SYNC Q5898 B3PBA0000402
SYNC SWITCH
B1ABCF000176 R5897 R5704
220K
SWITCH 100
4 1
TO SMPS R5896 C5897 R5706 D5730
100K 0.1 820K MA2YF8000L
SECTION (1/2) 3 2
R5705
220K C5703
F0CAF104A105...PH
F0CAF224A105...PN
PC5799 0.1...PH
B3PBA0000402 D5701 0.22...PN
FEED BACK B0FBAR000043 D
R5894
150
4
1 4
R5890
2.2K 3
2 3
2
FOR PN
T5751
1 TL7* TO J
ETS19AB2E6AG (BLK) VOLTAGE SELECTOR
C5711 CIRCUIT
SUB TRANSFORMER R5798 D5798 400V220
22 B0EAMM000057 (RED) IN SCHEMATIC
6
TL8* DIAGRAM - 12
D5896
B0EAMM000057
C5798 FOR PH E
SYS3.3 25V220
7 5
FOR PH
R5893 8 4
IC5799
10K MIP2F20MSSCF D5795
B0BC9R000008
R5892 SWITCHING POWER
1K 9 3 SUPPLY CONTROL
C C5712
1 C5899 R5786 400V220...PH
10V220 200K 200V560...PN
IC5899 R5895 10 2 5 D VCC 4
A 15K C5794 R5795
C0DAEMZ00001 3 C5790 1000P 470K
SHUNT REGULATOR C5898 2200P
0.1 1 6 NC CL 3
R
2 D5793
R5891 B0HAMP000094 7 S FB 2
33K R5797
FOR PH 15K F
8 S VDD 1
C5708
F1BAF1020020 C5796 C5795
1000P 0.1 1
1
2
1/2 2/2
SA-AKX10PH/PN SMPS CIRCUIT H
15 16 17 18 19 20 21 22 23 24 25 26 27 28
91
18.8. Voltage Selector Circuit (For PH Only)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A A
J VOLTAGE SELECTOR CIRCUIT (FOR PH ONLY)
(BLK)
TL5*
TO I 2
B SMPS CIRCUIT B
IN SCHEMATIC S5701
3
VOLT ADJ
DIAGRAM - 11
1
TL6*
(RED)
C C
D D
E E
F F
G G
H SA-AKX10PH/PN VOLTAGE SELECTOR CIRCUIT H
1 2 3 4 5 6 7 8 9 10 11 12 13 14
92
19 Printed Circuit Board
19.1. CD Servo, Tuner & Voltage Selector P.C.B.
A CD SERVO P.C.B. (REPX0636A) F TUNER P.C.B. (REP4557A)

H
R55 R54 CN51
R59 C57
R56 R53 L52 X51
TP38 IC52
W7021
R7211
C7218
C7241
C7217
TP16 C61
C7227
C7203
C7204
M7301* C58
R61
C60
R52
R62
TP19 C59 R51
R64
TP51 C7244 (TRV MOTOR) JK51
(ARF) R7217
C62
R57
C52
C7216 R7212 JK52
C7225
D7650
C7230
C7161
VA51
LB51
L51
C7223
C51
G TP14
C7231 TP18
C7142
W7001
C7107
C7226
TP50
C7670
W7002
W7003 C7102 R7218
C7228
R7601
C7601
W7004
W7005 TP17
R7221
TP39
R7111
W7006
TP88
LB7262
W7008 W7007
TP89
(SIDE A) (SIDE B)
C7154
C7155
IC7001
W7010
W7011
C7626 TP24 LB7263

F W7009
W7016
LB7264
W7012
C7263
C7166
CN7001 W7015
C7234
R7253
TP28
(VREF) TP87
C7235
CN7002
TP7
W7024
C7613 TP86
X7201
TP13
C7264
C7165
C7164
C7222
W7013
C7232
R7214
C7221
R7220
TP12
Q7601 R7330 TP8
R7650
R7323 R7331
R7254
R7315
TP9
R7349
C7233
R7339
S7201
E
R7328
C7352
(REST SW)
R7325
C7315 TP4
C7338
TP31
W7014
C7339 R7327
R7335
W7018 C7243 C7253

TP2
R7332
TP1 TP3
J
R7329 TP37
C7614
VOLTAGE SELECTOR P.C.B. (REPX0809C...PH)

R7336
TP90 W7017 TP10

TP11
W7025
W7026
IC7002 C7335
W7019
M7302*
(SPL MOTOR) C7334
D TP36 PbF 0688CB

W7020
RED BLK
TL6*
S5701 TL5*
S7202 (VOLTAGE SELECTOR)
(CD OPEN SW)
1 2 3
C
VOLT ADJ
A
NOTE: " * " REF IS FOR INDICATION ONLY. SA-AKX10PH/PN
CD SERVO / TUNER / VOLTAGE SELECTOR P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
93
19.2. Main P.C.B.
B MAIN P.C.B. (REPX0814BA...PH)

(REPX0814AA...PN)
H
AUX
1-GND
K2002...PH
K2001...PN
4-GND
W2017
W2018
C2001
G 3-RCH
W2019
W2004
W2003
Q2701 2-LCH
C2107
C2109
C2113
D2708 ZA2701* R2307
W2016
W2015
W2014
W2013
C2301 Q2302
C Q2301
W2022
B E
C2309
E
B
JK2801
R2791 R2308 C
C2817
C2115
D2706
D2707 C2302
C2716 C2711
C2706 B C
IC2701
C2102
W2010
C2002
C2003
3 Q2790 E C2007 C2004
W2006
D2790
R2701 R2702 C2120
R2314 R2313 CN2705
B
W2011 1 32
2
R2113
C2712 C2108 C2118 9
C2101
C
R2006 R2005
R2309
R2311
C2708 8
R2312
R2310
C2310
E R2790 W2012
1 C2119 7
C2702
4 6
W2008
D2704
R2114
28 C2125
W2021
4
W2007
C2704
W2002
W2501
C2124
C2717
C2114
W2036 2
1
W2001
8 C2123
IC2101
W2502
J2001
W2035 24
W2005
D2804
CN2711 C2121
F
K3902
PbF 0668AA
W2517
12 12
D2120
C2129
11
K2704
K2703 ZJ2701* 20
C2128
10
C2127
C2126
E 9
R2891
K2702
11 10 9 8 7 6 5 4 3 2 1 R2893 C 8
C2718
W2023
W2020
7 16 17
R2889 6
K2706
J2703
QR2802 5
C2122
W2102
R2772
C2719 W2503 4
R2607
E C B 3
R2870 2
E2701 R2872
R2774 R2868 Q2803 1 W2518
R2710
R2203 C2205 C2207

R2208
C2203
W2024
IC2702 R2867
W2055
E
W2031
W2034
R2865
W2041
W2040
2 C QR2702 QR2831 E
8 1
W2028
1 3 5 B
W2033
W2027
C2202
R2207
C2204 C2206
W2009
W2026
C C2402
W2025
R2205
W2039
1 B
2 4 E R2878
W2038
W2037
C QR2701 C2224 IC2201 C2405
QR2832 E
W2043
D2711 B R2879 R2206
R2227
R2225
C2225
C
R2773
B C2220
QR2801
D2710
CA R2204 5 4
R2229
C2221
R2223
A W2032
DZ2701
R2877
C2810
R2202
CA R2887 R2882 B
R2105 C Q2223 E R2201
E
R2857
R2856
W2504 W2030
L2702
W2057
R2707 R2888 R2881 E C
R2885
R2886 B
W2058
CN2706 R2890 C2201 Q2221
C2144 C2143
R2101
K2705 C2713 C2816 C2807 W2029 Q2222 Q2220

1 8 B
R2884
D2803 R2883 E
R2220
C2811 R2859 R2873 C
C2714
R2708
1 C2805 R2226 B C
2 IC2802 W2047 E
R2108
C2812 W2054 C R2231 B

3 C2226
C2222
R2102
4 5 E R2222
4 R2892 W2048 C2223
R2850 R2853
R2706 5 X2802 W2505 R2228 R2230 R2224
R2894
6
C2806
R2304
R2848
R2847
W2044 3 W2049
C2308
7 31 30 R2221
C2715 R2305
8 C2803
R2604 W2508
W2060
9 35 W2051 R2306
W2045 25 2 C2307 R2303
J2051
10 W2507
11 R2880 X2801
R2606
40 20
C2701 12 W2046 1
W2050
K2701 C2703 13 R2601 C2607
W2042 45
C2801
C2802
15 C2601
R2875
R2871
14
C2602
15 W2052 R2605
W2053
16 50
W2063 L2140 10
R2810
17
R2602
D2603
C2603
R2846
D2605
R2835 W2077
R2608
C2605
D2604
18
J2701
W2072
R2869
19 5
C2705 D2602
W2082
20
W2064 21 W2071 IC2801 1 W2073
R2843
51
C2145 22 R2841
D W2078 C2707 W2070

R2866
55
R2840 R2611
C2008
R2704 60 100
R2009
C2005 R2839
R2860 R2863
R2864 C2608
D2801
W2074
R2855
65
R2834
W2065 95
R2874 R2862
E C B
C2804 W2075
R2705
W2066 70 90
Q2702 D2802 R2854
R2858
W2067 75 85 R2822 R2130

D2709
W2061
R2821
W2510 R2852 81
W2068 80 R2824 CN2709
R2815
R2826 R2851
R2827
R2816
W2062
W2080
W2090
W2069 17
W2089
W2088
R2825 R2849 W2511

R2817
16 W2515
W2097
W2107
W2099
W2076
15
R2828
R2829
R2830
R2831
W2509 R2842
W2059 14
13
12
W2079
11
W2104
W2095 10
W2100
W2091 9
W2084
C2818
W2085
W2105
8
R2720
R2719
R2718
R2836
W2086
7
R2838
W2516
C
C2720
6
W2514
CN2707 5
L2801
R2805
R2809
R2812
W2092
W2106
R2721 4
W2513
(FOR DEBUG)
C2820
C2819
W2094
W2093
B 3
8 6 4 2 Q2705 E C 2
W2098
W2103
7 5 3 1 E
1 3 5 7 9 11 13 15 17 19 21 C
B
C2146 2 2 2 2 10 12 14 16 18 20 22
QR2704
W2096
W2512 CN2704
R2802
W2101
A
MAIN P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
94
19.3. Panel P.C.B.
C PANEL P.C.B. (REPX0814BB...PH)

(REPX0814AB...PN)
H
ZJ6001A*
PbF 0668AB
VOLUME 1 2
G S6004 S6012
(USB) (FM/AM)
W6012
R6005
R6004
R6024
R6003
VR6002
R6022
1 2 3 R6023
TRACK
S6005 VR6001 C6011 C6012
F
R6020 C6009 C6008

(D.BASS)
3
R6018 R6019
1
C6010
S6003 S6011
(AUX) (CD)
R6010
R6002
CN6001
4 3 2 1
W6011 W6015
CN6002
1 3 5 7 9 11 13 15 17
2 4 6 8 10 12 17 16
R6012
R6013
D S6002
(STOP/DEMO)
W6003
S6010
R6001 W6110 (ALBUM-)
R6009
W6004
W6009
W6010
W6007
W6021
W6008
R6028
C6007
S6009
(ALBUM+)
R6016
R6014
W6101 R6015
R6008
W6106
C6004
C
11
L6101
12
C6005
17 5
C6006
S6008
(EQ-/REW)
22 1 R6017
D6101 Q6101
C6103
R6007
D6104
B IC6001
T6101 R6105 R6102 C D6105 23 44
(SWITCHING E
TRANSFORMER) 2 28 39 S6007
C6003
R6103
1 3
(EQ+/FWD)
4 W6026 33 34
C6104
R6006
9 5
8 6
R6101 7
D6103
R6106 S6006
W6016
C6102
B W6018
(MANUAL_ EQ)
L6001
C6013
D6001 R6021
FL6001 C6002
S6001
R6025
C6101
(POWER) R6108 44 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 8 7 6 5 1
D6102
C6014
A
PANEL P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
95
19.4. CD Open Button, Remote Sensor, USB & D-Amp P.C.B.
D CD OPEN BUTTON P.C.B. (REPX0814BB...PH) E REMOTE SENSOR P.C.B. (REPX0814BB...PH)

(REPX0814AB...PN) (REPX0814AB...PN)
H
PbF 0668AD PbF 0668AE
S6201 CN6301 Z6301

1 ZJ6001B* (OPEN/CLOSE) 4 C6303 1
R6201 3 C6301
2 2 SENSOR
2 C6302
3
1
G USB P.C.B. (REPX0814BC...PH) H D-AMP P.C.B. (REPX0814BF...PH)

(REPX0814AC...PN) (REPX0814AF...PN)
E R950 Q5905 Q5903 CN5902
C951
C913 C902
C931 QR5900 W5041 R5903 1 3 5 7 9 11 ZJ5901*

C953
R5915
W21
R5918
C915 B E B
B C5956
L900
R953 R955 C 1
C952
E C 2 4 6 8 10 12
P901
W22
R952 R954 W2 E
C5903 C5904
C904
C
2
QR5901
R5904
W5040
R5913
R5908
LB952 W1 E B
E C5901
1 C
P903
R914
LB951
1 64 R907 2 4 1 B C5902 3
3
C908
R901
C901
X900
4 4 C
W4
R5928 4
6 60 5 Q5902 W5031
W7
R957
W24 W23
6
8
C5948
7
C5955
56 2 3 5
R5931
4 8
W6
C907
W3
12 W25 9 L5904
52 6
W5
3 10
L5902
USB PORT 16 49 11
W9 W27
W28
D5904
W8 W26
W29
2 12
C5950
13 4-FL- C5906
IC900
C5949
14 C5954 L5905 C5910
R5934
1 15
L5901
W5022
D5903
D
C5936
C5926
16 4 3 L5903
W10
17 48
17 3-FL+
5 R904 20 18
W5028
44 SPEAKERS 2 4
W30
19 C5908
C5953
W11
W5027
R5933
C5951
24 20 2-FR-
W5025
C912
40 21 2 1
C5905
R971
R972
R5932
D5905
22
LB852
28 36 R5927
D5906
C906 W31 C5909
R902
R903
C911
C5932
1-FR+
R5905
32 33 C905
C914 C903 R958 1 3
W12 R906 C5931
R5910 C5947 C5907
JK5901
R5917
C5952
C5945
C5920
PbF 0668AC C5924 C5925 C5937
K5901 W5023
IC5900 C5946
R5909
R5907
R5901
R5935
1 23
TH5900
5 15
W5046
W5044
C5921 C5923 C5938
R5914
C5918
C5930 R5926
C5939
B
R5906 W5033
2 10 22
Q5901E C
Q5907
C
C5927
C5928
C5929
C5934
C5933
C5935
R5911 C5943 B
C
R5924
C5944 R5925
C5915 E
R5923
C5919
C5917
B W5047
R5921 R5922 C
C5941
E W5042
Q5906
C5942
W5043
W5039 HEATSINK
W5045
PbF 0668AF
A
CD OPEN BUTTON / REMOTE SENSOR / USB / D-AMP P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
96
19.5. SMPS P.C.B. (For PH only)
I SMPS P.C.B. (REPX0809C...PH)

H
P5701
AC IN
C5704
C5705
L5703
W5740
W5741
W5738
W5739
110V-127V/
2 3
220V-240V
K5743
C5706 50/60Hz
G
R5709
DZ5701
K5706
R5708
W5742
1 4
C5701
K5744 K5705
W5743
ZA5702 F1 ZA5701
TH5702
T6.3AL 250V
R5704
BLK PC5702
F TL7*
D5730
R5798 W5744 R5706

1 4
C5707 RED
D5701 R5797
CAUTION TL8* IC5799 2 3
W5736
C5897
RISK OF ELECTRIC SHOCK -4 ~3 ~2 +1 1 4
PC5799
C5711
D5795 R5896
AC VOLTAGE LINE. C5794 3 2
W5703
C5796
C5795
PLEASE DO NOT TOUCH THIS P.C.B C5703 4 1
D5798
R5795
R5894
8 5 PRI SEC
6
7
R5705 C5798 T5751
5 (SUB TRANSFORMER)
R5786
W5730 R5821
R5897
8
W5728 4
Q5898
D5896
D5793
TP1 HEATSINK
C5712
E
E W5712 3 C
B
R5822
C5790
9
R5890
K5715
R5726 2
W5731
W5724 R5823
R5893
10
K5714 1 C5899
IC5701
C5708
R5824
W5735
K3
R5892
R5891
1 IC5899
C5737
D5732
D5801
C5725
2 3 1
C5721
C5726 2
C5898
3
W5720 4 T5701(MAIN TRANSFORMER) R5895
R5832
W5726
C5724 5
C5831 W5725
W5716
6
R5722
W5723
D5724
9 10
R5836
R5833
C5832
7
W5715
PRI SEC
C5805
W5721
W5749
C5722
C5808
R5732
D
W5745
8 11
W5713
R5733 C5820
W5748
L5704 D5727
C5821
C5730
R5835
C5822
C5819
R5837
W5719
D5721
C5720 C5723
D5726 7
R5834
12
E C B
R5803
D5702
Q5720 D5729 TH5860 Q5803
C5810
R5802
W5709
R5721 6 13
R5862
D5723 D5722 C5817 E C B
R5863
D5802
W5717
Q5722 W5722 R5806
D5728
5 14 C5800
C5728
B
C 1
W5718 R5828 CN5802
E R5703 1
R5804
PC5701 3 W5701
C5818
R5814
4 15 2
C5826
Q5721 R5827
C5896
1 4
R5860
2 3
W5702
R5702
2 3 B
R5729
4
R5728
R5723
C
R5720 16 IC5801 R5805 R5826
C5713
R5810
C
E
R5724
5
B
R5861
R5864
Q5860
W5710
W5714 C 6
E
D5803
R5825
C5870
2 17 7
B
Q5861
D5731
W5734 C
C5812 8
E
W5711 W5747 9
C5869
18 W5708
C5813
1 B
R5820
3 2
W5707 E
C
Q5862 10
11
D5725 R5730 4 1 HEATSINK
R5808
B
W5706 C W5705
PC5720 E
R5807 R5809 W5746
C5844
R5817 E R5840 W5704
C
B
CN5801 B R5801
QR5810 E C
6 5 4 3 2 1 QR5801
C5843
R5800
R5841
D5804
B PbF 0688CA
QR5802
A
SMPS P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
97
19.6. SMPS P.C.B. (For PN only)
I SMPS P.C.B. (REPX0809A...PN)

H
P5701
AC IN
C5704
C5705
L5703
W5740
W5741
W5738
W5739
2 3
K5743 120V 60Hz
R5709
DZ5701
K5706
R5708
W5742
1 4
C5701
K5744 K5705
W5743
ZA5702 F1 ZA5701
TH5702
8A 125V
R5704
PC5702
F D5730
R5798 W5744 R5706

1 4
D5701 R5797
CAUTION IC5799 2 3
W5736
C5897
RISK OF ELECTRIC SHOCK -4 ~3 ~2 +1 1 4
PC5799 R5896
C5794 D5795
AC VOLTAGE LINE.
K5711
3 2
W5703
C5796
C5795
PLEASE DO NOT TOUCH THIS P.C.B C5703 4 1
D5798
R5795
R5894
8 5 PRI SEC
6
7
R5705 C5798 T5751
5 (SUB TRANSFORMER)
W5730 R5821
R5897
8
W5728 4
Q5898
D5896
TP1 HEATSINK
C5712
R5727 E
E W5712
K5715
3
9
R5890
C
B
R5822
R5726 2
W5731 W5724 R5823
R5893
10
K5714 1 C5899
IC5701
C5708
R5824
W5735
K1
R5892
R5891
1 IC5899
D5732
D5801
C5725
2 3 1
C5721
C5726 2
C5898
3
W5720 4 T5701(MAIN TRANSFORMER) R5895
R5832
W5726
C5724 5
C5831 W5725
W5716
6
R5722
W5723
D5724
C5727
9 10
C5832
7
W5715
PRI SEC
C5805
W5721
W5749
C5722
C5808
R5732
D
W5745
8 11
W5713
R5733 C5820
W5748
L5704 D5727
C5821
C5730
C5822
C5819
W5719
D5721
C5720 C5723
D5726 7
R5834
12
E C B
R5803
D5702
Q5720 D5729 TH5860 Q5803
C5810
R5802
W5709
R5721 6 13
R5862
D5723 D5722 C5817 E C B
R5863
D5802
W5717
Q5722 W5722 R5806
D5728
5 14 C5800
C5728
B
C 1
W5718 R5828 CN5802
E R5703 1
R5804
PC5701 3 W5701
C5818
R5814
4 15 2
C5826
Q5721 R5827
C5896
1 4
R5860
2 3
W5702
R5702
2 3 B
R5729
4
R5728
R5723
C
R5720 16 IC5801 R5805 R5826
C5713
R5810
C
E
R5724
5
B
R5861
R5864
Q5860
W5710
W5714 C 6
E
D5803
R5825
C5870
2 17 7
B
Q5861
D5731
W5734 C
C5812 8
E
W5711 W5747 9
C5869
18 W5708
C5813
1 B
R5820
3 2
W5707 E
C
Q5862 10
11
D5725 R5730 4 1 HEATSINK
R5808
B
W5706 C W5705
PC5720 E
R5807 R5809 W5746
C5844
R5817 E R5840 W5704
C
B
CN5801 B R5801
QR5810 E C
6 5 4 3 2 1 QR5801
C5843
R5800
R5841
D5804
B PbF 0688AA
QR5802
A
SMPS P.C.B.
1 2 3 4 5 6 7 8 9 10 11 12 13
98
20 Terminal Function of ICs Pin
No.
Terminal Name I/O Function
53 EE_CS/EFP/EPM O EEPROM chip select (Flash

20.1. IC2801 (RFKWMAKX10PN): IC EPM for on board writer)
54 EE_CLK O EEPROM clock
MICRO-PROCESSOR 55 EE_DAT I/O EEPROM data
56 MCLK I/O CD command CLK output
57 MDATA_OUT I/O CD command data output
Pin Terminal Name I/O Function
58 MLD I/O CD command load output
No.
59 STATUS I CD servo LSI status input
1 NC - No Connection
60 CD RST O CD reset Output
61 /RESET_SW(INNER_SW) I CD limit SW Input for the most
3 Mute_F O DAMP MUTE_F
inner point(activeLow)
4 F_HOP O FHOP for DAMP
(s_ImecINNER)
5 DCDET_DAMP I DC detect input 1 (D.Amp fail-
62 VCC - Power supply (+3.3V)
ure)
63 CD_LOAD_(H)(TRV_SW) O CD LOAD (H)
6 MODE_DA O For digital amp mute
(s_OmecTRAY_CW_H)
7 MUTE A O Audio Mute
64 VSS - Ground (0V)
8 BYTE - External Data Bus width select
65 CD_LOAD_(L)(TRV_CCW O CD LOAD
input. (GND)
) (L)(s_OmecTRAY_CCW_H)
9 CNVSS EFP_CNVSS - Flash Mode Terminal
66 CD OPEN SW I CD OPEN SW
10 XCIN - 32.768kHz sub clock (s_ImecUNLOAD)
11 XCOUT - 32.768kHz sub clock 67 NC - No Connection
12 /RESET - /Reset input (Active L) 68 HEADPHONE_SW I Headphone SW
13 XOUT - 10MHz main clock 69 NC - No Connection
14 VSS - GND (0V) 70 NC - No Connection
15 XIN - 10MHz main clock 71 NC - No Connection
16 VCC - Power Supply (+3.3V) 72 NC - No Connection
17 /NMI - Connected to vcc (3.3V) 73 NC - No Connection
18 RMT I Remote control Input 74 NC - No Connection
19 TUN_INT I Tuner Interupt 75 BLKCK I CD block control Input
20 SYNC I AC failure detect input 76 NC - No Connection
21 NC - No Connection 77 NC - No Connection
22 NC - No Connection 78 VERR O verify error for USB version up
23 NC - No Connection using CD
24 TUN_RST O Tuner Reset 79 USB_REQ WR_START I Write start flag for USB version
25 TUN_CLK O Tuner CLK up.
26 TUN_DATA I/O Tuner Data 80 TERR I Time Out Error for USB
27 NC - No Connection 81 MMOD0 I Micon mode switching for USB
28 NC - No Connection version up
29 USB_SCL (RXD)/ I/O USB I2C clock line (Flash Rx for 82 FL_CLK O Serial Clock to FL driver
WR_END on board writer) 83 FL_DOUT O Serial Data to FL driver
30 USB_SDA (TXD)/ERR I/O USB I2C data line (Flash Tx for 84 FL_CS O FL driver CS
on board writer) 85 CLIP_ATT O Clip Attenuation
31 RXD O RX for Debug 86 CLIP_SENSOR I CLIP SENSOR
32 TXD O TX for Debug 87 NC - No Connection
33 USB_RST(CLK) O USB reset pin. (Flash Clock for 88 ROTARY_JOG I Rotary Jog
on board writer) 89 REG I Region Setting
34 BUSY I (Flash Busy for On board writer) 90 VOL_JOG I Volume Jog
35 ASP_DAT I/O ASP DATA 91 CS I Chip Select pin
36 ASP_CLK I/O ASP_CLK 92 NC - No Connection
37 NC - No Connection 93 KEY 2 I Key 2 Input
38 NC - No Connection 94 KEY 1 I Key 1 input
39 NC - No Connection 95 BASS_JOG1 I Bass Jog 1
40 NC - No Connection 96 AVSS - Analog power supply input
41 NC - No Connection (Connect to GND)
42 NC - No Connection 97 BASS_JOG2 I Bass Jog 2
43 NC - No Connection 98 VREF - Reference for AD (3.3V)
44 NC - No Connection 99 AVCC - Analog power supply input
45 NC - No Connection 100 DEMO_SEL I (H= default demo ON, L=default
46 NC - No Connection demo OFF)
48 NC - No Connection 20.2. IC6901(C0HBB0000057): IC FL
49 SMPS_BP O SMPS_Beat Proof
50 NC - No Connection Driver
51 DCDET_PWR I DC detect input (Power supply
failure)
52 PCONT/EFP/CE O Main transformer control output
No.
1 P0 - No Connection
99
No.
5 OSC I Oscillator Input
7 DIN I Data Input
8 CLK I Clock Input
9 STB I Serial Interface Strobe
10 K1 - Key Data Input 1 (No Connec-
tion)
11 K2 - Key Data Input 2 (No Connec-
tion)
12 VSS - GND
13 VDD - Power Supply (+5V)
14 S1 O Segment Output 18
30 VEE - Voltage Supply
31 G12 O Segment Output 2
32 G11 O Segment Output 1
33 G10 O Grid Segment Output 1
37 G6 O Grid Segment Output5
39 G4 O Grid Segment Output7
43 VDD - Voltage Supply (+5V)
44 VSS - GND
100
21 Exploded View and Replacement Parts List
21.1. Exploded View and Mechanical replacement Part List
21.1.1. Cabinet Parts Location
16
5
16
H 18
e 16
P901 (PANEL P.C.B.) T6101
25 16
16
(USB P.C.B.)
16
P903 16
d
CN6002
G 18 29 16
c
CN6001
FL6001 a 16
18 32
17
3
VR6001 VR6002 16
17 34
F 37 c
16
*ZJ6001A
b 16
a
Z6301 CN6301
18 36 (REMOTE SENSOR P.C.B.)
E 17 12
18 *ZJ6001B
b
16
17 17
9
17 35 (CD OPEN BUTTON P.C.B.)
33
C
11
14
11-1
11-1
40
B 15
40
31
A 38
SA-AKX10PH/PN-K
NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. CABINET DRAWINGS
1 2 3 4 5 6 7 8 9 10 11 12 13
101
CN2705
(TUNER P.C.B.)
*HEATSINK 18
H f
30 30 UNIT B
JK52
18
JK2801 30 T5701 f
28 d 1 JK51
(MAIN P.C.B.)
CN51
CN2709 ^18
*HEATSINK *D-AMP
CN2711 2
G CN2704
30
30 UNIT A HEATSINK
h T5751 UNIT
*ZJ2701
j 18
e P5701 20 ^(VOLTAGE
*SMALL j SELECTOR
CN2706 HEATSINK P.C.B.) *TL6
UNIT 10
CN2707 20 l
*TL7 20 m
20
F 30 m ^6 18
F1 18
(SMPS P.C.B.)
E2701 20
g CN5802 *TL8 l ^S5701
39 18
k ^7 *TL5
41
8 CN5801 18
(D-AMP P.C.B.) JK5901

E i 42
19 h
20 13
(CD MECHANISM 19 CN5902
UNIT (DLS6C)) 20 k
22
i *ZJ5901
20
D 24
27
20
n
21
401 20 21
C 20
26
CN7001 S7201
n (CD SERVO P.C.B.)

26
407 CN7002
B
g
S7202
23
4
407
407
43 43
A
NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. SA-AKX10PH/PN-K
" ^ " PART IS FOR PH ONLY. CABINET DRAWINGS
1 2 3 4 5 6 7 8 9 10 11 12 13
102
21.1.2. Packaging
H ACCESSORIES BAG
*P2 A1 REMOTE CONTROL

A1-1 R/C BATTERY COVER
G
P3
*P2 A2 AC CORD (FOR PN ONLY)
SA-AKX10PH/PN
F A2 AC CORD (FOR PH ONLY)
A3 OI BOOK
*P2
SB-AKX10PN
E
A4 AM LOOP ANTENNA
D A5 FM INDOOR ANTENNA
A6 AC PLUG ADAPTOR
(FOR PH ONLY)
C
NT
FRO
P1
B
POLYFOAM (TOP FRONT)

A *P2 POLYFOAM (TOP REAR)
SC-AKX10PH/PN-K
POLYFOAM (BOTTOM) PACKAGING DRAWINGS
1 2 3 4 5 6 7 8 9 10 11 12 13
103
104
21.1.3. Mechanical Replacement Part List
Safety Ref. Part No. Part Name & Qty Remarks

No. Description
Safety Ref. Part No. Part Name & Qty Remarks 18 RHD30119-S SCREW 13 PH
No. Description
18 RHD30119-S SCREW 12 PN
CABINET AND
CHASSIS 19 RHDX031008 SCREW 2
1 REEX1001 9P FFC (MAIN- 1 20 RHDX30005-1 SCREW 11
TUNER) 21 RMAX0333-2 CHASSIS SUPPORT 2
2 REEX1147 12P FFC (MAIN- 1 22 RMAX1002 D-AMP BRACKET 1
DAMP) 23 RMKX1005 BOTTOM CHASSIS 1
3 REEX1157 17P FFC (MAIN- 1 24 RMKX1006 INNER CHASSIS 1
PANEL) 25 RMNV0079-1 FL HOLDER 1
4 REEX1161 22P FFC (MAIN-CD 1 26 RMQX0382-2 MECHA HOLDER 2
MECHA)
27 RMQX1041-Q SUPPORT SHEET 1
5 REEX1170 22P FFC (USB- 1
28 RMR0502A-W PCB SUPPORT 1
MAIN)
29 RSCV0087B-1 USB CASING TOP 1
6 REXX1030 1P RED WIRE 1 PH
(VOLTAGE-SMPS) 30 XTB3+10JFJ SCREW 6
7 REXX1031 1P BLACK WIRE 1 PH 31 RGKX1030-K CD LID 1
(VOLTAGE-SMPS) 32 RGUX1007-K POWER BUTTON 1
8 REXX1040 6P CABLE WIRE 1 33 RGUX1009-K CD OPEN BUTTON 1
(DAMP-SMPS) 34 RGUX1010-S MAIN CONTROL 1
9 REXX1076 2P CABLE WIRE 1 BUTTON L
(PANEL-CD OPEN 35 RGUX1011-S MAIN CONTROL 1
BUTTON) BUTTON R
10 REXX1089 11P CABLE WIRE 1 36 RGUX1016-K MANUAL EQ BUTTON 1
(SMPS-MAIN) 37 RKMX1003-K TOP CABINET 1
11 RFKGAKX10PHK FRONT PANEL 1
38 RMBX1002 CD LID OPEN 1
ASS'Y
SPRING
11-1 RKAX0042-K LEG CUSHION 2
39 RMCX0035 HEATSINK CLIP A 1
12 RYPX0321H-S D.BASS BUTTON 1
40 RMGX0033 CUSHION RUBBER 2
UNIT
41 RMNX1025 WIRE HOLDER 1
13 RGRX1002A-A2 REAR PANEL 1 PN
42 RMQ1702 PCB SUPPORT 1
13 RGRX1002B-A2 REAR PANEL 1 PH
43 RKAX0042-K LEG CUSHION 2
14 RGWX0112-S1 VOLUME KNOB 1
15 RGWX0113-S SKIP KNOB 1
TRAVERSE DECK
16 RHD26046-L SCREW 13
401 RAEX0190Z-V TRAVERSE UNIT 1
17 RHD30007-K2J SCREW 6
407 XTN2+6GFJ SCREW 3
105
No. Description
PACKING MATERI-
ALS
P1 RPGX3065 PACKING CASE 1 PN
P1 RPGX3066 PACKING CASE 1 PH
P2 RPNX1019 POLYFOAM 1
P3 RPFX0198 MIRAMAT SHEET 1
ACCESSORIES
A1 N2QAYB000500 REMOTE CONTROL 1
A1-1 RKK-PT470EBK R/C BATTERY 1
COVER
A2 K2CB2CB00021 AC CORD 1 PN
A2 K2CQ2CA00007 AC CORD 1 PH
A3 RQTX1084-M O/I BOOK (En,Sp) 1
A3 RQTX1085-M O/I BOOK (Sp) 1 PH
A4 N1DYYYY00010 AM LOOP ANTENNA 1
A5 RSAX0002 FM INDOOR 1
ANTENNA
A6 K2DAYYY00002 AC PLUG ADAPTER 1 PH
106
21.2. Electrical Replacement Part List

No. Description
Safety Ref. Part No. Part Name & Qty Remarks IC900 MNZSFB5KJM2 IC 1
No. Description
IC2101 C1BB00001151 IC 1
PRINTED CIRCUIT
BOARDS IC2201 C0AABB000125 IC 1
IC2701 C0CAAKG00046 IC 1
PCB1 REP4557A TUNER P.C.B. 1 (RTL) IC2702 C0DAAYG00001 IC 1
PCB2 REPX0636A CD SERVO P.C.B. 1 (RTL) IC2801 RFKWMAKX10PN IC 1
PCB3 REPX0809A SMPS P.C.B. 1 (RTL) IC2802 C3EBFY000006 IC 1
PN IC5701 C5HACYY00004 IC 1 PN
PCB3 REPX0809C SMPS P.C.B. 1 (RTL) IC5701 C5HACYY00005 IC 1 PH
PH IC5799 MIP2F20MSSCF IC 1
PCB4 REPX0814AA MAIN P.C.B. 1 (RTL) IC5801 C0DABFC00002 IC 1
PN IC5899 C0DAEMZ00001 IC 1
PCB4 REPX0814BA MAIN P.C.B. 1 (RTL) IC5900 C1BA00000497 IC 1
PH
IC6001 C0HBB0000061 IC 1
PCB5 REPX0814AB PANEL P.C.B. 1 (RTL)
IC7001 MN6627954AMA IC 1
PN
IC7002 BA5948FPE2 IC 1
PCB5 REPX0814BB PANEL P.C.B. 1 (RTL)
PH
PCB6 REPX0814AB CD OPEN BUTTON 1 (RTL) TRANSISTORS
P.C.B. PN
PCB6 REPX0814BB CD OPEN BUTTON 1 (RTL) Q2220 B1ABCF000176 TRANSISTOR 1
P.C.B. PH Q2221 B1ABCF000176 TRANSISTOR 1
PCB7 REPX0814AB REMOTE SENSOR 1 (RTL) Q2222 B1ABCF000176 TRANSISTOR 1
P.C.B. PN Q2223 B1ABCF000176 TRANSISTOR 1
PCB7 REPX0814BB REMOTE SENSOR 1 (RTL) Q2301 B1ABCF000176 TRANSISTOR 1
P.C.B. PH
Q2302 B1ABCF000176 TRANSISTOR 1
PCB8 REPX0814AC USB P.C.B. 1 (RTL)
PN Q2701 B1BACG000023 TRANSISTOR 1
PCB8 REPX0814BC USB P.C.B. 1 (RTL) Q2702 B1AAJC000019 TRANSISTOR 1
PH Q2705 B1ADCE000012 TRANSISTOR 1
PCB9 REPX0814AF D-AMP P.C.B. 1 (RTL) Q2790 B1ABCF000176 TRANSISTOR 1
PN Q2803 B1ACKD000006 TRANSISTOR 1
PCB9 REPX0814BF D-AMP P.C.B. 1 (RTL) Q5720 B1BABG000007 TRANSISTOR 1
PH Q5721 B1ADCF000001 TRANSISTOR 1
PCB10 REPX0809C VOLTAGE SELEC- 1 (RTL) Q5722 B1ABCF000176 TRANSISTOR 1
TOR P.C.B. PH
Q5803 B1BABG000007 TRANSISTOR 1
Q5860 B1ADCF000001 TRANSISTOR 1
INTEGRATED CIR-
CUITS
Q5862 B1GBCFJJ0051 TRANSISTOR 1
IC52 VUEALLPT031 IC 1 [SPG]
107
Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks
No. Description No. Description
Q5901 B1ABGC000005 TRANSISTOR 1 DZ2701 B0JCPD000025 DIODE 1
Q5902 B1ADCE000012 TRANSISTOR 1 DZ5701 ERZV10V511CS ZNR 1
Q5905 B1ABCF000176 TRANSISTOR 1 VARISTORS
Q5906 B1ABCF000176 TRANSISTOR 1 VA51 EZAEG2A50AX ESD SUPRESSOR 1
Q6101 B1BABK000001 TRANSISTOR 1 VARIABLE RESIS-
Q7601 B1ADCF000001 TRANSISTOR 1 TORS
QR2701 B1GBCFJJ0051 TRANSISTOR 1 VR6001 EVEKE2F3524B VOLUME JOG 1
QR2702 B1GBCFJJ0051 TRANSISTOR 1 VR6002 K9AA012Y0004 VR ENCODER 1
QR2704 B1GBCFJJ0051 TRANSISTOR 1
QR2801 B1GBCFLL0037 TRANSISTOR 1 SWITCHES
QR2802 B1GBCFLL0037 TRANSISTOR 1 S5701 K0ABCA000007 SW VOLTAGE 1 PH
QR2831 B1GDCFGG0026 TRANSISTOR 1 SELECTOR
QR2832 B1GDCFGG0026 TRANSISTOR 1 S6001 EVQ21405RJ SW POWER 1
QR5801 B1GBCFJN0038 TRANSISTOR 1 S6002 EVQ21405RJ SW STOP/DEMO 1
QR5802 B1GDCFGA0018 TRANSISTOR 1 S6003 EVQ21405RJ SW AUX 1
QR5810 B1GBCFLL0037 TRANSISTOR 1 S6004 EVQ21405RJ SW USB 1
QR5900 B1GBCFJJ0051 TRANSISTOR 1 S6005 EVQ21405RJ SW D. BASS 1
QR5901 B1GDCFJJ0047 TRANSISTOR 1 S6006 EVQ21405RJ SW MANUAL_EQ 1
S6007 EVQ21405RJ SW EQ+/FWD 1
DIODES S6008 EVQ21405RJ SW EQ-/REW 1
D2120 B0EAKM000117 DIODE 1 S6009 EVQ21405RJ SW ALBUM+ 1
D2602 B0ACCK000012 DIODE 1 S6010 EVQ21405RJ SW ALBUM- 1
D2603 B0ACCK000012 DIODE 1 S6011 EVQ21405RJ SW CD 1
D2604 B0ACCK000012 DIODE 1 S6012 EVQ21405RJ SW FM/AM 1
D2605 B0ACCK000012 DIODE 1 S6201 EVQ21405RJ SW OPEN/CLOSE 1
D2704 B0BC8R2A0266 DIODE 1 S7201 RSH1A045-1A SW RESET 1
D2706 B0EAKM000117 DIODE 1 S7202 RSH1A045-1A SW CD OPEN 1
D2707 B0EAKM000117 DIODE 1
D2708 B0EAKM000117 DIODE 1 CONNECTORS
D2709 B0ACCK000012 DIODE 1 CN51 K1MN09AA0003 9P CONNECTOR 1
D2711 B0ADCJ000020 DIODE 1 CN2705 K1MN09AA0003 9P CONNECTOR 1
D2801 B0ACCK000012 DIODE 1 CN2707 K1MN08B00013 8P CONNECTOR 1
D2802 B0ACCK000012 DIODE 1 CN2709 K1MY17AA0124 17P CONNECTOR 1
D2804 B0BC5R1A0266 DIODE 1 CN5801 K1KA06AA0180 6P CONNECTOR 1
D5701 B0FBAR000043 DIODE 1 CN5802 K1KA11AA0194 11P CONNECTOR 1
D5702 B0ZAZ0000052 DIODE 1 CN5902 K1MN12AA0003 12P CONNECTOR 1
D5721 B0BC010A0007 DIODE 1 PH CN6001 K1KA04AA0031 4P CONNECTOR 1
D5721 B0BC018A0267 DIODE 1 PN CN6002 K1MY17AA0124 17P CONNECTOR 1
D5722 B0BC019A0007 DIODE 1 CN6301 K1KB04A00046 4P CONNECTOR 1
D5723 B0ACCK000012 DIODE 1 CN7001 K1MN16B00154 16P CONNECTOR 1
D5724 B0ACCK000012 DIODE 1 CN7002 K1MN22BA0005 22P CONNECTOR 1
D5725 B0BC6R100010 DIODE 1 P901 K1MN22BA0005 22P CONNECTOR 1
D5726 B0EAKM000117 DIODE 1 P903 K1FY104B0011 USB CONNECTOR 1
D5727 B0ACCK000012 DIODE 1
D5728 B0ACCK000012 DIODE 1 COILS AND INDUC-
TORS
D5729 B0EAMM000057 DIODE 1
L51 G1CR18JA0020 INDUCTOR 1
D5730 MA2YF8000L DIODE 1
L52 G2A380Y00001 ANTENNA COIL 1
L900 G1C100K00019 INDUCTOR 1
D5732 B0BC035A0007 DIODE 1
L2140 G0C470JA0055 INDUCTOR 1
D5793 B0HAMP000094 DIODE 1 PH
L2702 G0A101ZA0028 CHOKE COIL 1
D5795 B0BC9R000008 DIODE 1
L2801 G0A220GA0002 CHOKE COIL 1
L5703 G0B612H00002 LINE FILTER 1
D5801 B0ABSM000008 DIODE 1
D5802 B0ABSM000008 DIODE 1 L5704 J0JBC0000019 INDUCTOR 1
D5803 B0HFRJ000012 DIODE 1 L5901 J0JKB0000020 INDUCTOR 1
D5804 B0ACCK000012 DIODE 1 L5902 J0JKB0000020 INDUCTOR 1
D5896 B0EAMM000057 DIODE 1 L5903 G0A150L00003 CHOKE COIL 1
D5903 B0HCSP000001 DIODE 1 L5904 G0B9R5K00005 LINE FILTER 1
D5904 B0HCSP000001 DIODE 1 L5905 G0B9R5K00005 LINE FILTER 1
D5905 B0HCSP000001 DIODE 1 L6001 J0JBC0000019 INDUCTOR 1
D5906 B0HCSP000001 DIODE 1 L6101 G0A220GA0002 CHOKE COIL 1
D6001 B0BC2R4A0263 DIODE 1 LB51 J0JBC0000032 INDUCTOR 1
D6101 B0BC024A0269 DIODE 1
D6102 B0JAME000114 DIODE 1 TRANSFORMERS
D6103 B0EAMM000057 DIODE 1 T5701 ETS39AG4M6AD MAIN TRANSFORMER 1 PH
D6104 B0EAMM000057 DIODE 1 T5701 ETS39AG4NGAD MAIN TRANSFORMER 1 PN
D6105 B0BC036A0264 DIODE 1 T5751 ETS19AB2E6AG SUB TRANSFORMER 1
D7650 MAZ8056GML DIODE 1
108
T6101 G4DYA0000214 SWITCHING TRANS- 1 W2501 D0GDR00JA017 0 1/10W 1
FORMER W2502 D0GBR00JA008 0 1/16W 1
W2503 D0GBR00JA008 0 1/16W 1
COMPONENT COMBI- W2504 D0GDR00JA017 0 1/10W 1
NATION
W2505 D0GBR00JA008 0 1/16W 1
Z6301 B3RAB0000084 REMOTE SENSOR 1
W2507 D0GBR00JA008 0 1/16W 1
W2508 D0GBR00JA008 0 1/16W 1
PHOTO COUPLERS
W2509 D0GDR00JA017 0 1/10W 1
PC5701 B3PBA0000402 PHOTO COUPLER 1
W2510 D0GBR00JA008 0 1/16W 1
PC5702 B3PBA0000402 PHOTO COUPLER 1 W2511 D0GBR00JA008 0 1/16W 1
PC5720 B3PBA0000402 PHOTO COUPLER 1 W2512 D0GDR00JA017 0 1/10W 1
PC5799 B3PBA0000402 PHOTO COUPLER 1 W2513 D0GDR00JA017 0 1/10W 1
W2514 D0GDR00JA017 0 1/10W 1
OSCILLATORS W2515 D0GBR00JA008 0 1/16W 1
X51 H0A327200097 CRYSTAL OSCILLA- 1 W2516 D0GDR00JA017 0 1/10W 1
TOR W5033 D0GBR00JA008 0 1/16W 1
X900 H0A120500009 CRYSTAL OSCILLA- 1 W5039 D0GBR00JA008 0 1/16W 1
TOR W5040 D0GDR00JA017 0 1/10W 1
X2801 H0A327200097 CRYSTAL OSCILLA- 1 W5041 D0GBR00JA008 0 1/16W 1
TOR
W5042 D0GDR00JA017 0 1/10W 1
X2802 H2B100500004 CRYSTAL OSCILLA- 1
TOR W5043 D0GDR00JA017 0 1/10W 1
X7201 H0H169500013 CRYSTAL OSCILLA- 1 W5044 D0GDR00JA017 0 1/10W 1
TOR W5045 D0GBR00JA008 0 1/16W 1
W5046 D0GDR00JA017 0 1/10W 1
FL DISPLAY W5047 D0GBR00JA008 0 1/16W 1
FL6001 A2BB00000171 LCD DISPLAY 1 W5744 D0GBR00JA008 0 1/16W 1
W6101 D0GDR00JA017 0 1/10W 1
FUSES W7001 D0GBR00JA008 0 1/16W 1
F1 K5D632BK0007 FUSE 1 PH W7002 D0GBR00JA008 0 1/16W 1
F1 K5D802APA008 FUSE 1 PN W7003 D0GBR00JA008 0 1/16W 1
W7004 D0GBR00JA008 0 1/16W 1
FUSE HOLDERS W7005 D0GBR00JA008 0 1/16W 1
ZA5701 K3GE1ZZ00001 FUSE HOLDER 1 W7006 D0GBR00JA008 0 1/16W 1
ZA5702 K3GE1ZZ00001 FUSE HOLDER 1 W7007 D0GBR00JA008 0 1/16W 1
W7008 D0GBR00JA008 0 1/16W 1
THERMISTORS W7009 D0GBR00JA008 0 1/16W 1
TH5702 D4CAA2R20001 THERMISTOR 1 W7010 D0GBR00JA008 0 1/16W 1
W7011 D0GBR00JA008 0 1/16W 1
TH5860 D4CC11040013 THERMISTOR 1
W7012 D0GBR00JA008 0 1/16W 1
TH5900 D4CC11040013 THERMISTOR 1
W7013 D0GBR00JA008 0 1/16W 1
W7014 D0GBR00JA008 0 1/16W 1
JACKS
W7015 D0GBR00JA008 0 1/16W 1
JK51 K4ZZ02000103 JK FM ANT 1
W7016 D0GBR00JA008 0 1/16W 1
JK52 K4AC02B00042 JK AM ANT 1
W7017 D0GBR00JA008 0 1/16W 1
JK2801 K2HA204B0153 JK AUX 1
W7018 D0GBR00JA008 0 1/16W 1
JK5901 K4AL04B00001 JK SPEAKER 1
W7019 D0GBR00JA008 0 1/16W 1
P5701 K2AA2B000011 AC INLET 1 PH
W7020 D0GBR00JA008 0 1/16W 1
P5701 K2AB2B000007 AC INLET 1 PN W7021 D0GBR00JA008 0 1/16W 1
W7024 D0GBR00JA008 0 1/16W 1
EARTH TERMINALS W7025 D0GDR00JA017 0 1/10W 1
E2701 K4CZ01000027 TERMINAL 1 W7026 D0GDR00JA017 0 1/10W 1
CHIP JUMPERS RESISTORS

K1 D0GBR00JA008 0 1/16W 1 PN R51 D0GB102JA008 1K 1/16W 1
K3 D0GBR00JA008 0 1/16W 1 PH R52 D0GB102JA008 1K 1/16W 1
K2706 D0GBR00JA008 0 1/16W 1 R53 D0GA472JA023 4.7K 1/16W 1
LB852 D0GBR00JA008 0 1/16W 1 R54 D0GA472JA023 4.7K 1/16W 1
LB951 D0GBR00JA008 0 1/16W 1 R55 D0GA221JA023 220 1/16W 1
LB952 D0GBR00JA008 0 1/16W 1 R56 D0GB221JA007 220 1/10W 1
LB7262 D0GBR00JA008 0 1/16W 1 R57 D0GA102JA023 1K 1/16W 1
LB7263 D0GBR00JA008 0 1/16W 1 R59 D0GB222JA008 2.2K 1/16W 1
LB7264 D0GBR00JA008 0 1/16W 1 R61 D0GB473JA008 47K 1/16W 1
W21 D0GDR00JA017 0 1/10W 1 R62 D0GB473JA008 47K 1/16W 1
W22 D0GBR00JA008 0 1/16W 1 R64 D0GBR00JA008 0 1/16W 1
W23 D0GBR00JA008 0 1/16W 1 R901 D0GB102JA008 1K 1/16W 1
W24 D0GBR00JA008 0 1/16W 1 R902 D0GB102JA008 1K 1/16W 1
W25 D0GDR00JA017 0 1/10W 1 R903 D0GBR00JA008 0 1/16W 1
W28 D0GBR00JA008 0 1/16W 1 R907 D0GDR00JA017 0 1/10W 1
W31 D0GBR00JA008 0 1/16W 1 R952 D0GB240JA008 24 1/16W 1
109
R953 D0GB240JA008 24 1/16W 1 R2802 D0GB104JA008 100K 1/16W 1
R954 D0GB153JA008 15K 1/16W 1 R2805 D0GB103JA008 10K 1/16W 1
R955 D0GB153JA008 15K 1/16W 1 R2809 D0GB472JA008 4.7K 1/16W 1
R957 D0GB222JA008 2.2K 1/16W 1 R2810 D0GB223JA008 22K 1/16W 1
R972 D0GB102JA008 1K 1/16W 1 R2816 D0GB122JA008 1.2K 1/16W 1 PH
R2005 D0GB473JA008 47K 1/16W 1 R2816 D0GBR00JA008 0 1/16W 1 PN
R2101 D0GB332JA008 3.3K 1/16W 1 R2822 D0GB101JA008 100 1/16W 1
R2130 D0GBR00JA008 0 1/16W 1 R2829 D0GB101JA008 100 1/16W 1
R2201 D0GB102JA008 1K 1/16W 1 R2830 D0GB101JA008 100 1/16W 1
R2203 D0GBR00JA008 0 1/16W 1 R2834 D0GB473JA008 47K 1/16W 1
R2204 D0GBR00JA008 0 1/16W 1 R2835 D0GB103JA008 10K 1/16W 1
R2224 D0GB102JA008 1K 1/16W 1 R2847 D0GB106JA008 10M 1/16W 1
R2225 D0GB272JA008 2.7K 1/16W 1 R2848 D0GBR00JA008 0 1/16W 1
R2227 D0GB104JA008 100K 1/16W 1 R2850 D0GB105JA008 1M 1/16W 1
R2303 D0GB101JA008 100 1/16W 1 R2855 D0GB152JA008 1.5K 1/16W 1
R2305 D0GB331JA008 330 1/16W 1 R2857 D0GB101JA008 100 1/16W 1
R2306 D0GB331JA008 330 1/16W 1 R2858 D0GB101JA008 100 1/16W 1
R2601 D0GB475JA008 4.7M 1/16W 1 R2868 D0GB101JA008 100 1/16W 1
R2706 D0HB152ZA002 1.5K 1/16W 1 R2880 D0GB101JA008 100 1/16W 1
R2707 D0HB102ZA002 1K 1/16W 1 R2881 D0GB101JA008 100 1/16W 1
R2708 ERJ3RBD272V 2.7K 1/16W 1 R2882 D0GB101JA008 100 1/16W 1
R2710 D0GB105JA008 1M 1/16W 1 R2883 D0GB473JA008 47K 1/16W 1
R2718 D0GB2R2JA008 2.2 1/16W 1 R2884 D0GB101JA008 100 1/16W 1
110
R2894 D0GB103JA008 10K 1/16W 1 R5905 D0GF100JA014 10 1/8W 1
R5702 D0GZ104JA012 100K 1W 1 PH R5906 D0GB184JA008 180K 1/16W 1
R5702 D0GZ333JA012 33K 1W 1 PN R5907 ERJ3RBD273V 27K 1/16W 1
R5703 D0GZ104JA012 100K 1W 1 PH R5908 D0GB103JA008 10K 1/16W 1
R5703 D0GZ333JA012 33K 1W 1 PN R5909 ERJ3RBD333V 33K 1/16W 1
R5704 ERJ8GEYJ224V 220K 1/4W 1 R5910 D0HB152ZA002 1.5K 1/16W 1
R5705 ERJ8GEYJ224V 220K 1/4W 1 R5911 D0GB562JA008 5.6K 1/16W 1
R5706 D0GD824JA017 820K 1/8W 1 R5913 ERJ3RBD272V 2.7K 1/16W 1
R5708 ERJ8GEYJ155V 1.5M 1/4W 1 R5914 D0GB562JA008 5.6K 1/16W 1
R5709 ERJ8GEYJ155V 1.5M 1/4W 1 R5915 D0GB103JA008 10K 1/16W 1
R5720 D0GD220JA017 22 1/10W 1 R5917 D0GF100JA014 10 1/8W 1
R5721 D0GD103JA017 10K 1/10W 1 R5918 ERJ3RBD272V 2.7K 1/16W 1
R5722 D0GD122JA017 1.2K 1/10W 1 R5921 D0GF100JA014 10 1/8W 1
R5723 D0GB102JA008 1K 1/16W 1 R5922 D0GF100JA014 10 1/8W 1
R5724 D0GD121JA017 120 1/10W 1 R5923 D0GB682JA008 6.8K 1/16W 1
R5726 ERX2SZJR10P 0.1 2W 1 PH R5924 D0GB562JA008 5.6K 1/16W 1
R5726 ERX2SZJR15P 0.15 2W 1 PN R5925 D0GB562JA008 5.6K 1/16W 1
R5727 ERX2SZJR13P 0.13 2W 1 PN R5926 D0GB101JA008 100 1/16W 1
R5729 D0GD103JA017 10K 1/10W 1 R5928 D0GB823JA008 82K 1/16W 1
R5730 D0GB102JA008 1K 1/16W 1 R5931 ERJ1TYJ220U 22 1W 1
R5732 D0GB101JA008 100 1/16W 1 R5932 ERJ1TYJ220U 22 1W 1
R5786 D0GZ204JA012 100K 1W 1 PH R5934 D0GB562JA008 5.6K 1/16W 1
R5795 D0GD474JA017 470K 1/8W 1 R5935 D0GB103JA008 10K 1/16W 1
R5800 D0GD153JA017 15K 1/10W 1 R6003 D0GB222JA008 2.2K 1/16W 1
R5801 D0GD223JA017 22K 1/10W 1 R6004 D0GB332JA008 3.3K 1/16W 1
R5802 D0HB123ZA002 12K 1/16W 1 R6005 D0GB682JA008 6.8K 1/16W 1
R5803 D0HB102ZA002 1K 1/16W 1 R6006 D0GB122JA008 1.2K 1/16W 1
R5804 D1BD4702A077 47K 1/10W 1 R6007 D0GB152JA008 1.5K 1/16W 1
R5805 ERJ3RBD222V 2.2K 1/16W 1 R6008 D0GB222JA008 2.2K 1/16W 1
R5807 D0GD331JA017 330 1/8W 1 R6010 D0GB472JA008 4.7K 1/16W 1
R5808 D0GD222JA017 2.2K 1/10W 1 R6012 D0GB103JA008 10K 1/16W 1
R5809 D0GD331JA017 330 1/8W 1 R6013 D0GB103JA008 10K 1/16W 1
R5810 D0GB331JA008 330 1/16W 1 R6014 D0GB221JA007 220 1/10W 1
R5817 D0GB331JA008 330 1/16W 1 R6016 D0GB471JA008 470 1/16W 1
R5821 ERG2SJ471E 470 2W 1 R6018 D0GB103JA008 10K 1/16W 1
R5824 ERG2SJ471E 470 2W 1 R6021 D0GB100JA008 10 1/16W 1
R5832 D0GZ222JA012 2.2K 1W 1 R6028 D0GB102JA008 1K 1/16W 1
R5833 D0GZ222JA012 2.2K 1W 1 PH R6101 D0GB473JA008 47K 1/16W 1
R5834 D0GZ222JA012 2.2K 1W 1 R6102 D0GB470JA008 47 1/16W 1
R5835 D0GZ222JA012 2.2K 1W 1 PH R6103 D0GBR00JA008 0 1/16W 1
R5836 D0GZ222JA012 2.2K 1W 1 PH R6105 D0GB682JA008 6.8K 1/16W 1
R5837 D0GZ222JA012 2.2K 1W 1 PH R6106 D0GD1R0JA017 1.0 1/8W 1
R5840 D0GB823JA008 82K 1/16W 1 R6108 D0GD1R0JA017 1.0 1/8W 1
R5860 ERJ3GEYF103V 10K 1/10W 1 R7111 D0GB103JA008 10K 1/16W 1
R5861 ERJ3GEYF472V 4.7K 1/10W 1 R7211 D0GB823JA008 82K 1/16W 1
R5862 D0GD183JA017 18K 1/8W 1 R7212 D0GB821JA008 820 1/16W 1
R5863 D0GD183JA017 18K 1/8W 1 R7214 D0GB471JA008 470 1/16W 1
R5864 ERJ3GEYF103V 10K 1/10W 1 R7217 D0GB102JA008 1K 1/16W 1
R5891 ERJ3RBD333V 33K 1/16W 1 R7220 D0GB105JA008 1M 1/16W 1
R5892 D0HB102ZA002 1K 1/16W 1 R7221 D0GB101JA008 100 1/16W 1
R5893 ERJ3RBD103V 10K 1/16W 1 R7253 D0GB100JA008 10 1/16W 1
R5897 D0GB101JA008 100 1/16W 1 R7325 D0GB331JA008 330 1/16W 1
111
R7329 D0GB102JA008 1K 1/16W 1 C2206 F1H1H561A013 560pF 50V 1
R7330 D0GB562JA008 5.6K 1/16W 1 C2207 F1H1H561A013 560pF 50V 1
R7331 D0GB273JA008 27K 1/16W 1 C2220 F1H1A224A007 0.22uF 10V 1
R7335 D0GB101JA008 100 1/16W 1 C2222 F1J0J106A020 10uF 6.3V 1
R7336 D0GB100JA008 10 1/16W 1 C2223 F2A1C101A208 100uF 16V 1
R7601 D0GB4R7JA008 4.7 1/16W 1 C2226 F1J0J106A020 10uF 6.3V 1
R7650 D0GB5R6JA008 5.6 1/16W 1 C2301 F1J0J106A020 10uF 6.3V 1
1 C2302 F1J0J106A020 10uF 6.3V 1
CAPACITORS 1 C2307 F1H1H104A013 0.1uF 50V 1
C51 F1H1H102A219 1000pF 50V 1 C2308 F1H1H104A013 0.1uF 50V 1
C52 F1H1A474A025 0.47uF 10V 1 C2309 F1H1H153A219 0.015uF 50V 1
C58 F1H1H220A230 22pF 50V 1 C2402 F1J0J106A020 10uF 6.3V 1
C59 F1H1A105A025 1uF 10V 1 C2405 F1J0J106A020 10uF 6.3V 1
C60 F1H1A105A025 1uF 10V 1 C2601 F2A1H2R2A145 2.2uF 50V 1
C61 F1G1C104A077 0.1uF 16V 1 C2602 F2A1H1R0A213 1.0uF 50V 1
C62 F1G1C104A077 0.1uF 16V 1 C2603 F1H1H123A219 0.012uF 50V 1
C901 F1H1H104A013 0.1uF 50V 1 C2605 F1H1H123A219 0.012uF 50V 1
C902 F1H1H104A013 0.1uF 50V 1 C2607 F2A1H1R0A213 1.0uF 50V 1
C903 F1H1H104A013 0.1uF 50V 1 C2608 F2A1H2R2A145 2.2uF 50V 1
C904 F2A1C100A234 10uF 16V 1 C2701 F1H1H103A219 0.01uF 50V 1
C906 F2A1C100A234 10uF 16V 1 C2703 F2A1C470A180 47uF 16V 1
C907 F1H1H180A230 18pF 50V 1 C2704 F2A1A330A159 33uF 10V 1
C908 F1H1H220A004 22pF 50V 1 C2705 F2A1C470A180 47uF 16V 1
C913 F1H1H104A013 0.1uF 50V 1 C2708 F2A1C470A180 47uF 16V 1
C915 F2A1C470A234 47uF 16V 1 C2712 F2A1C470A180 47uF 16V 1
C931 F2A1C100A234 10uF 16V 1 C2713 F1H1H103A219 0.01uF 50V 1
C951 F1H1H104A013 0.1uF 50V 1 C2714 F1H1A474A001 0.47uF 10V 1
C952 F1H1H104A013 0.1uF 50V 1 C2715 EEUFC0J821B 820uF 6.3V 1
C953 F2A0J101A245 100uF 6.3V 1 C2716 F1H1H103A219 0.01uF 50V 1
C2001 D0GBR00JA008 0 1/16W 1 C2717 F2A1E3310048 330uF 25V 1
C2002 F1H1H102A219 1000pF 50V 1 C2718 F2A1E3310048 330uF 25V 1
C2005 F1H1H102A219 1000pF 50V 1 C2801 F1H1H180A230 18pF 50V 1
C2107 F1J0J106A020 10uF 6.3V 1 C2806 F2A0J221A181 220uF 6.3V 1
C2108 F1H0J1050013 1uF 6.3V 1 C2807 F1H0J1050013 1uF 6.3V 1
C2109 F1H0J1050013 1uF 6.3V 1 C2810 F2A1H3R3A213 3.3uF 50V 1
C2113 F1H0J1050013 1uF 6.3V 1 C2811 F1H1H331A013 330pF 50V 1
C2114 F1H0J1050013 1uF 6.3V 1 C2812 F1H1H331A013 330pF 50V 1
C2115 F1J0J106A020 10uF 6.3V 1 C2816 F1H1H223A219 0.022uF 50V 1
C2118 F1H1A154A001 0.15uF 10V 1 C2817 F2A1H4R7A213 4.7uF 50V 1
C2119 F1H1A224A007 0.22uF 10V 1 C2818 F1H1H101A720 100pF 50V 1
C2121 F2A1H2R2A145 2.2uF 50V 1 C2820 F1H1H101A720 100pF 50V 1
C2122 F1H1A224A007 0.22uF 10V 1 C5701 F0CAF334A105 0.33uF 1
C2123 F1H1A154A001 0.15uF 10V 1 C5703 F0CAF104A105 0.1uF 1 PH
C2124 F1H1A224A007 0.22uF 10V 1 C5703 F0CAF224A105 0.22uF 1 PN
C2125 F1H1H332A013 3300pF 50V 1 C5704 F1BAF1020020 1000pF 1
C2126 F2A1H2R2A145 2.2uF 50V 1
C5705 F1BAF1020020 1000pF 1
C2127 F1H1H103A219 0.01uF 50V 1
C5706 F1BAF1020020 1000pF 1 PH
C2128 F2A1C221A236 220uF 16V 1
C5707 F1BAF1020020 1000pF 1 PH
C2129 F2A1C100A234 10uF 16V 1
C2143 F1H1H102A219 1000pF 50V 1 C5708 F1BAF1020020 1000pF 1
C2144 F1H1H102A219 1000pF 50V 1 C5711 F2B2G2210012 220uF 400V 1 PH
C2145 F2A0J221A181 220uF 6.3V 1 C5712 F2B2D5610008 560uF 200V 1 PN
C2146 F2A0J221A181 220uF 6.3V 1 C5712 F2B2G2210012 220uF 400V 1 PH
C2201 F2A1A101A159 100uF 10V 1 C5713 F0C2J1030007 0.01uF 630V 1
C2202 F1H0J1050013 1uF 6.3V 1 C5720 F1H1H104A013 0.1uF 50V 1
C2203 F1H0J1050013 1uF 6.3V 1 C5721 F1H1H2210001 220pF 50V 1
112
C5724 F2A1H5600009 56uF 50V 1 C5946 F2A1C100A234 10uF 16V 1
C5725 F1H1H104A013 0.1uF 50V 1 C5947 F1H1H102A219 1000pF 50V 1
C5726 F1H1H104A013 0.1uF 50V 1 C5948 ECQV1H684JL3 0.68uF 50V 1
C5727 F1B3A3320012 3300pF 1000V 1 PN C5949 ECQV1H684JL3 0.68uF 50V 1
C5730 F1H1E105A116 1uF 25V 1 C5951 F1H1H104A013 0.1uF 50V 1
C5737 ECKE3D821KBP 820pF 2000V 1 PH C5952 F1H1H104A013 0.1uF 50V 1
C5790 F1K2J2220002 2200pF 630V 1 PH C5953 F1H1H104A013 0.1uF 50V 1
C5795 F1K1H105A149 1uF 50V 1 C5955 F1H1H104A013 0.1uF 50V 1
C5796 F1H1H104A013 0.1uF 50V 1 C5956 D0GBR00JA008 0 1/16W 1
C5798 F2A1E2210050 22uF 50V 1 C6003 F1H1H104A013 0.1uF 50V 1
C5800 F1J2E1030004 0.01uF 250V 1 C6004 F1H1H331A013 330pF 50V 1
C5805 F2A1H102B126 1000uF 50V 1 C6005 F1H1H331A013 330pF 50V 1
C5813 F2A1V331B150 330uF 35V 1 C6009 F1H1H101A230 100pF 50V 1
C5817 F2A2AR100002 0.10uF 100V 1 C6010 F1H1H102A219 1000pF 50V 1
C5819 F1J2E1030004 0.01uF 250V 1 C6012 F1H1H101A230 100pF 50V 1
C5820 F1J2E1030004 0.01uF 250V 1 C6013 F1H1H104A013 0.1uF 50V 1
C5821 F1J2E1030004 0.01uF 250V 1 C6014 F2A1H220A182 22uF 50V 1
C5822 F1J2E1030004 0.01uF 250V 1 C6101 F2A1C101A208 100uF 16V 1
C5826 F1J2E1030004 0.01uF 250V 1 C6102 F2A1H470A147 47uF 50V 1
C5832 F1H1H104A013 0.1uF 50V 1 C6104 F2A1H470A147 47uF 50V 1
C5843 F1J1A106A043 10uF 10V 1 C6301 F1H1H101A230 100pF 50V 1
C5844 F1J1A106A043 10uF 10V 1 C6302 F1H1H102A219 1000pF 50V 1
C5869 F1H1H104A013 0.1uF 50V 1 C6303 F2A1H220A182 22uF 50V 1
C5870 F1H1H104A013 0.1uF 50V 1 C7102 F1H1A474A025 0.47uF 10V 1
C5898 F1H1H104A013 0.1uF 50V 1 C7154 F1H1C104A042 0.1uF 16V 1
C5899 F2A1A2210063 220uF 10V 1 C7155 F1H1C104A042 0.1uF 16V 1
C5901 F1H1H102A219 1000pF 50V 1 C7161 F1H1C104A042 0.1uF 16V 1
C5902 F1H1H102A219 1000pF 50V 1 C7164 F1J1A106A076 10uF 10V 1
C5903 F1H1H104A013 0.1uF 50V 1 C7165 F1J1A106A076 10uF 10V 1
C5905 F1H1H104A013 0.1uF 50V 1 C7203 F2A0J221A200 220uF 6.3V 1
C5908 F2A1H221B436 220uF 50V 1 C7217 F1H1C104A042 0.1uF 16V 1
C5917 F1H1H102A219 1000pF 50V 1 C7223 F2A1H4R70037 4.7uF 50V 1
C5920 F2A2A220A388 22uF 100V 1 C7227 ECA1HAK010XI 1uF 50V 1
C5921 F1H1H104A013 0.1uF 50V 1 C7228 ECA1HAK010XI 1uF 50V 1
C5924 F1H1H330A230 33pF 50V 1 C7231 F2A0J221A200 220uF 6.3V 1
C5925 F1K2A1040007 0.1uF 100V 1 C7232 F2A0J221A200 220uF 6.3V 1
C5927 F1J2A221A030 220pF 100V 1 C7234 F1H1C104A042 0.1uF 16V 1
C5928 F1H1H153A219 0.015uF 50V 1 C7235 F2A1C100A133 10uF 16V 1
C5929 F1J2A221A030 220pF 100V 1 C7241 F1H1H102A219 1000pF 50V 1
C5930 F1H1C474A140 0.47uF 16V 1 C7243 F1H1C104A008 0.1uF 16V 1
C5934 F1J2A221A030 220pF 100V 1 C7264 F1H1C104A042 0.1uF 16V 1
C5935 F1J2A221A030 220pF 100V 1 C7315 F1H1A474A025 0.47uF 10V 1
C5936 F1H1H104A013 0.1uF 50V 1 C7334 ECEA1AKA221I 220uF 10V 1
C5937 F1K2A1040007 0.1uF 100V 1 C7335 F1H1C104A008 0.1uF 16V 1
C5938 F1H1H104A013 0.1uF 50V 1 C7338 F1H1E2730002 0.027uF 25V 1
C5941 F1H1A474A001 0.47uF 10V 1 C7352 F1H1C183A001 0.018uF 16V 1
C5942 F1H1H102A219 1000pF 50V 1 C7601 ECEA0JKA330I 33uF 6.3V 1
C5943 F1H1H331A013 330pF 50V 1 C7613 F1H1C104A042 0.1uF 16V 1
C5944 F1H1A474A001 0.47uF 10V 1 C7614 F2A0J101A198 100uF 6.3V 1
C5945 F2A1A101A159 100uF 10V 1 C7626 F1H1C104A042 0.1uF 16V 1
113
No. Description
C7670 F1H1C104A042 0.1uF 16V 1
MMH1002
114

Panasonic SA-AKX10 (PN, PH) PDF

Uploaded by

Copyright:

Available Formats

Panasonic SA-AKX10 (PN, PH) PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Panasonic SA-AKX10 (PN, PH) PDF

Uploaded by

Copyright:

Available Formats

PSG1002034CE

© Panasonic Corporation 2010. All rights reserved.

1.1.1. LEAKAGE CURRENT COLD CHECK

1.1.2. LEAKAGE CURRENT HOT CHECK

1.2. Before Use (For PH only)

1.3. Caution For Fuse Replacement

1.5. Protection Circuitry

1.6. Safety Parts Information

Definition of PCB Lead Free Solder being used

(See right figure)

2.4.1. Cautions to Be Taken in Handling the Optical Pickup Unit

2.4.2. Grounding for electrostatic breakdown prevention

2.4.2.1. Worktable grounding

• CD Mechanism unit (DLS6C):

1) This model uses CD Mechanism Unit (DLS6C).

1) The following components are supplied as an assembled part.

1) This model uses speaker, SB-AKX10PN-K (PSG1001001CE)

Volume Control Album selection

[USB, / ] Tuner (FM/AM) Selection

Remote control signal sensor 17 Disc tray

[MANUAL EQ] selection

Item Key Operation

2. To exit, press [OK] button on

EEPROM For checking of various items In CD Mode:

Volume Setting To check the volume setting of a main In Doctor Mode:

Press [7]: VOLUME50

FL Display To check the FL segment display In Doctor mode:

DLS6 Reliability To determine CD Mechanism Unit In Doctor Mode:

DLS6 Reliability To determine CD Mechanism DLS6C In Doctor Mode:

Note: Refer to Section 6.3 Fig 2. for

DLS6 Reliability To determine CD Mechanism Unit In Doctor Mode:

In this mode,ensure the CD is in the

2.To cancel, press [0]

OPEN First Track

OPEN wait First Track

CLOSE Last Track

CLOSE wait Count up Last Track Count up

Fig. 1. Reliability Test (Loading) Fig. 2. Reliability Test (Traverse)

Fig. 3. Reliability Test (Combination)

2. Do not release [STOP]

3. To exit, press [POWER,/l ]

6.5.1. Power Supply Error Code Table

F76 DCDET1 = L (NG)

F61-76 Both DCDET1 and

6.5.2. Mechanism Error Code Table (CD Mechanism Unit (DLS6C))

F26 Communication between At the time of switching to Press [ ] on main

H15 CD Open SW Abnormal During normal operation Press [ ] on main

H16 CD closing SW abnormal During Closing operation,if Press [ /-DEMO]on main

Symptom Checking Items Possible Fault(s) Remarks

Switching Regulator IC:

Voltage Regulator IC:

Fig. 2 Main P.C.B.

Fig. 3 D-Amp P.C.B.

D-AMP IC Operation & Control

1) D-AMP IC (C1AB0000497) was used for this model (AKX10).

No Pin no Signal name Function

Table 1: Digital AMP Pin Control.

No MODE_DA MUTE_F Digital AMP IC mode status

For 9 KHz Step