Scribd
Upload
108 views2 pages

c200321 (WRFC E)

COMPLETACION

Uploaded by

María Marquina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views2 pages

c200321 (WRFC E)

COMPLETACION

Uploaded by

María Marquina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WRFC-E

Description
The Electric Wireline Retrievable Flow Controller (WRFC-E) is
a side pocket mounted electrically controlled flow controller.
The control valve is housed adjacent to the tubing bore within
the eccentric side pocket of a mandrel. The WRFC-E is
remotely controlled from the surface through a surface unit
and software. All flow-wetted components are wireline
retrievable for repair or replacement.

The WRFC-E uses field proven Schlumberger electronics to


control the actuation module, which adjusts the side pocket
Variable Window™ control valve. Power is transmitted down
a Permanent Downhole Cable (PDC) to actuate a motor. The
motor controls the positioning of the Variable Window ™ to
within 1% of full scale travel. Telemetry data, including
Annular Temperature and Pressure, Tubing Temperature and
Pressure, and Variable Window ™ position are all transmitted
to the surface via the PDC.

The Variable Window™ Flow Controller can be configured to


control fluids injected into or produced from the reservoir. In
either configuration optional reverse flow check valves will
prevent cross flow between reservoirs.

The WRFC-E has a maximum equivalent flow area of 0.75


square inches and is capable of controlling fluid flow rates of
up to 10,000 bpd of solids-free fluid and 30 mmscfd of dry gas.

"All data herein is estimated and subject to change without notice pending final design"

C200321
WRFC-E
Maximum Nitrogen Gas Flow with 2000 psi Maximum Water Flow
Injection Pressure
12000

25
Flow Rate (mmscfd)

10000

Flow Rate (bpd)


20 8000

15 6000

10 4000

5 2000

0 0
2000 1800 1600 1400 1200 1000 800 0 50 100 150 200 250 300 350 400 450
Downstream Pressure (psi) Pressure Differential (psi)

Note: These charts show curve-fit maximum flow rates. The Variable Window™ can be customized for
applications which require lower flow rates.

Specification Summary
Nominal Completion Size 4-1/2” x 9-5/8”
Drift O.D. (in.) 8.250
Drift I.D. (in.) 3.625
Test Pressure (Differential) (psi.) 7500
Max. Pressure (Absolute) (psi) 10000
Max. Temperature (°F) 300
Overall Length (in.) < 160
Material Requirements NACE MR-0-175
Tensile / Compression Strength (lbs.) > 289,000
Max. Liquid Flow Rate (bpd) 10,000
Max. Gas Flow Rate (mmscfd) 30
Measurement Power Requirements at Tool (watts) 9
Actuation Power Requirements at Tool (watts) 30
Voltage Required at Tool (Volts) 250-400 DC

Sensor Specifications (Sapphire Sensors)


Parameter Range Resolution Accuracy Drift
Pressure 0 – 10,000 psi 0.05 psi < 5 psi < 4 psi/yr (100°C)
Temperature -25° - 150° C 0.03°C 0.3°C

Note: Mandrels are available in nominal sizes ranging from 3-1/2” to 7”.

"All data herein is estimated and subject to change without notice pending final design"

C200321

You might also like