Scribd
Upload
89 views2 pages

Pi600R Series Pressure Sensor: Stainless Steel Pressure Transducer

The Pi600R series is a stainless steel pressure transducer that measures liquid and gas pressures between -1 and 700 bar. It has excellent chemical and abrasion resistance. Models are available with voltage or current outputs and various pressure ranges and electrical connections. It is compact and rugged with high accuracy even in complex applications and harsh environments.

Uploaded by

abasak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views2 pages

Pi600R Series Pressure Sensor: Stainless Steel Pressure Transducer

The Pi600R series is a stainless steel pressure transducer that measures liquid and gas pressures between -1 and 700 bar. It has excellent chemical and abrasion resistance. Models are available with voltage or current outputs and various pressure ranges and electrical connections. It is compact and rugged with high accuracy even in complex applications and harsh environments.

Uploaded by

abasak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Issue Sept 2004

Pi600R Series PRESSURE SENSOR

Stainless Steel Pressure Transducer


• Pressure Ranges –1 to 700bar
• Gauge or Absolute Versions
• Sealed to IP67 with M12 connector
• Excellent Chemical
• and Abrasion Resistance
• Rugged Construction
• Wide Choice of Electrical Outputs
• Excellent Performance/Price Ratio

Options Available
Interim Pressure Ranges (Consult Factory)
Manufactured from Different Materials for Different Application
Compatibility
Special Output Scaling (Consult Factory)

M12 Connector

Improved accuracy (NL&H) - <±0.10% or <±0.05%/span BFSL


Improved accuracy (TZS) - <±0.02% or <±0.01% /span/°C
(Thermal Zero Shift)
Supplied With Any Instrumentation and Calibrated as a Complete
System with Traceable Certificate

DESCRIPTION

The Pi600R series of pressure sensors has been engineered for the measurement of liquid and
gas pressures in a diverse range of industrial and specialised applications, including:- Hydrau-
lics, Pneumatics, Agriculture, Marine, Sewage, Gas, Medical, Chemical, Food Processing, Ba-
rometers, Dataloggers etc.

Pressure ranges between –1 and


700bar are available in gauge or abso-
lute models with a wide choice of elec-
trical output signals to meet operational
requirements.

Constructed from stainless steel with a


ceramic diaphragm, the Pi600R series
of transducers are extremely rugged
yet of compact design.

UK / Europe / Office USA / Canada Office Australia / Asia Pacific Office


Tel: +44 (0)845 9000 601 Tel +1-866-849-3441 Tel +61 (0)282 442 363
Fax: +44 (0)845 9000 602 Fax +1-866-628-8055 Fax +61 (0)294 751 278
[email protected] [email protected] [email protected]
East Kingsway Business Centre, PO Box 84 18 Welcome Street
www.omniinstruments.co.uk Mid Craigie RD, Dundee, Scotland UK. Arroyo Grande California, 93420 Parkes NSW 2870
Issue Sept 2004

Pi600R Series PRESSURE SENSOR


SPECIFICATION
Characteristics Pi605 Pi642 Units
Pressure Ranges: -1, -1 - +1, 2 , 5 , 6 , 10 , 16 , 20 , 40 , 60 , 100 , 150 , 200 , 300 , 400 , 500 , 600 , 700 Bar gauge
Rated Output 0.5-4.5V 4-20mA

Excitation Voltage 5V(regulated 10-32 (unregulated) VDC

Input Current <3 N/a mA


Output Config 3 wire 2 wire No. of wires
Accuracy 0.25 (<0.10 or <0.05 optional ) +/- % of rated O/P
Zero balance <0.1 +/- % of rated O/P
Safe Overpressure 150 Of Pressure Range
Temperature range Compensated +20 to +80 °C
Operating -20 to +100 °C
Temperature Effect On Span <0.010 +/- of Output/°C
On Zero <0.040(<0.020 Or<0.010 optional) +/- of Rated Output/°C
Stability <0.1 over 12 months +/- of Rated Output
Input Resistance 1100 n/a ohms
Output Resistance 1100 n/a ohms
Insulation >500 Meg ohms at 50vDC
Media Compatability Any media Compatible with 316 L St St, Alumina & Seal of choice

Weight 100 Grams

Protection I.P. 67 with M12 connector

The connection above shows the rear view of the connector The connection above shows the rear view of the connector
with screw terminals. If a yellow 2 metre lead is supplied with screw terminals. If a yellow 2 metre lead is supplied
then the brown wire is used for the +ve supply and the blue then the brown wire is used for the supply and the white for
wire for the 0.5-4.5v signal. The white wire is connected to the signal.
the common or ground.
In a typical 4-20mA loop the Pin1 +V sup is connected to
the positive side of the power supply. Pin 2 4-20mA O/P is
connected to the +ve input terminal of the data logger or
display, and the negative input terminal of the logger/
display is connect to the –ve side of the power supply.
Some devices may need a shunt resistor across the input
terminals. A 249 ohm shunt resistor will convert a 4-20mA
signal to a 1-5v signal.

UK / Europe / Office USA / Canada Office Australia / Asia Pacific Office


Tel: +44 (0)845 9000 601 Tel +1-866-849-3441 Tel +61 (0)282 442 363
Fax: +44 (0)845 9000 602 Fax +1-866-628-8055 Fax +61 (0)294 751 278
[email protected] [email protected] [email protected]
East Kingsway Business Centre, PO Box 84 18 Welcome Street
www.omniinstruments.co.uk Mid Craigie RD, Dundee, Scotland UK. Arroyo Grande California, 93420 Parkes NSW 2870

You might also like