SAE Net Horsepower: 160 HP (119 kW)

Operating Weight: 48,900 lbs. (22 200 kg)

Digging Depth: 21 ft 10 in (6.65 m)
 Performance, Productivity and
Reliabilty Come Standard
Link-Belt X4 Series excavators are built to exceed your
expectations. New electronically-controlled hydraulic pumps
reduce cycle times by as much as 9%. Expect more power and
fuel efficiency, thanks to an innovative Final Tier 4 engine that
delivers up to 12% improved fuel consumption, without a Diesel
Particulate Filter (DPF) to maintain or replace! Settle in to
the roomiest, most accommodating cab in its class, with more
legroom and a new high-back, heated seat for shift-long comfort.
Daily maintenance is a snap, with ground-level access to all
service points, easily opened by hand.

2
Innovation and Attention
to Details at Every Level
• Three power modes (Speed Priority, • 7” high-definition LCD monitor
Heavy and Applied Power) let you keeps you connected to your
choose the best blend of power, machine and work environment
precision and fuel savings for the
work you’re doing

• EPA Final Tier 4 engine is fuel • RemoteCARE® telematics keeps

efficient without sacrificing power a watchful eye on performance,
maintenance intervals and theft
deterrence
• No DPF to ever worry about!
• 2-3% DEF (Diesel Exhaust Fluid)
• Full-time, rear-view camera display
consumption rate relative to fuel
is standard; add the WAVES™ option
consumption, combined with one of
for a seamless 270° view around
the largest DEF tank capacities lets
the machine
you work long hours between refills

• Ground level access to routine • Structural improvements to the

service points lets you cut daily boom and arm reduce stress and
maintenance down to just minutes provide greater durability

• Quiet, pressurized cab offers • Robust undercarriage features

excellent visibility and comfortable, larger track rollers and thicker
best-in-class seating plating for longer life
• Unique side-frame design reduces
• Enough floor space to accommodate dirt accumulation and is easier
the largest of work boots, with to clean
cup holders and roomy storage
• Add Link-Belt 2D Machine Guidance
compartments for cell phones,
to maintain a consistent grade
snacks and other personal items
and depth control for all projects.
Choose 2D Machine Control for
• Dual cab working lights are
semiautonomous digging; operator
standard, or choose optional LEDs
controls the speed of the stick while
for added visibility
the boom and bucket automatically
adjust to maintain the target grade.

• Ergonomic joysticks fit your hand

perfectly

*All improvements and percentage increases are in reference to Link-Belt X3 Series excavators, unless otherwise stated

3
4
 Quick and
Responsive to
Take On Tough
Challenges
Greater digging power, increased lift capacities and faster
cycle times start with our intuitive Ulti-Flow™ hydraulic
system featuring a 30% larger hydraulic passage area,
larger spools and advanced controls. Pilot pressure
sensors detect the type of work being done-such as
digging or leveling-and then relays that data to proportional
solenoid valves that quickly determine where optimal
hydraulic pressures should be directed for that operation.
Two electronically-controlled Kawasaki variable-displacement
axial-piston pumps and one Kawasaki gear pump assure
that hydraulic power is delivered precisely when and where
it’s needed. At the same time, hydraulic flows in noncritical
areas of the system are reduced.

The result is better breakout force, more lifting strength

and faster machine response. You’ll dig, swing and dump
quicker than ever before…with up to 9% faster cycle
times and improved fuel efficiency!
• Proprietary hydraulic system
• New control valve with larger ports; less restriction
means improved hydraulic flow for increased
performance
• Electronically-controlled pumps for improved cycle times,
quicker response and more efficient machine operation
• Move more dirt per gallon of fuel

5
 Power and
Efficiency
Without
Compromise
The X4 Series features innovative EPA-certified Final Tier 4
engines from Isuzu that strike the ultimate balance between
power, productivity and fuel efficiency. You’ll experience up to
12% improved fuel efficiency, without having to worry about
costly diesel particulate filters (DPF) to maintain or replace.
Three power modes provide reliable power and control for any
machine application. Choose Speed Priority (SP mode) to get
jobs done quickly, Heavy (H mode) for the best blend of power
and fuel savings or Applied Power (A mode), with 13 different
RPM settings for precise control of heavy lifting, fine grading or
leveling work.
• EPA-certified Tier 4 Final
• No DPF to maintain
• Up to 12% improved fuel economy
• 500-hr. fuel filter service intervals
• 10 diesel tank refills per 1 diesel exhaust fluid (DEF) refill
• 2.5% DEF consumption rate
• Two-stage DEF anti-freeze system for protection in harsh
operating conditions
• 30 hrs. between SCR regenerations, only takes 5-10
minutes to complete!
• VGT (Variable Geometry Turbocharger)

6
Grade Control Technology
Improves Productivity & Accuracy
2D Machine Guidance (MG)
The 210 X4 can be fitted with the Link-Belt® 2D Machine Guidance (MG) system to help improve excavator operations on
projects such as trenching for underground utilities and pipelines, digging footers and basements, site prep, building roads
and mass excavation. Simply input the target depth, cross slope,
and or mainfall slope required from the job and the system will
provide visual and audible indication to help the operator maintain
a desired grade thus eliminating under or over excavating.
2D MG leverages the existing machine monitor and eliminates
clutter inside the cab. The 2D MG system also utilizes external
inertial measurement unit (IMU) sensors to provide highly accurate
guidance at a lower cost compared to “in-cylinder sensors”.
• Utilizes the machine monitor for all 2D MG operations.
• The 2D MG monitor indicates the position of the attachment
relative to the target grade at all times providing the operator
the information he needs without relying on a grade checker.
• Measurement mode enables the operator to use the
excavator attachment as a precise measuring tool.
• Guidance mode displays depth, attachment angle, height &
depth limitation alarm.
• Guidance system only, operator is in full control of the machine.
• Operators are up to 30% more productive with 2D MG
compared to without technology.

2D Machine Control (MC)

The Link-Belt 2D Machine Control (MC) system enables
operators to dramatically improve their productivity and
accuracy while reducing their mental fatigue by automating
the movement of the boom and bucket to keep the bucket
cutting edge on the desired target grade. 2D MC is ideal for
applications like trenching for underground utilities or pipelines
or anything that requires the last pass to perfectly match the
desired target grade whether it’s a flat or sloping surface. The
2D MC system adds a 10” Android touchscreen display with
an intuitive user interface and a machine control joystick in the
cab to engage the semi-automatic boom and bucket control.
• Semi-automatic function intended for the last pass at the
desired target grade, not for bulking out or mass excavation.
• The operator controls the speed of the stick while the boom
and bucket automatically adjust to maintain the target grade.
• The operator is in full control and can override the semi-
automatic function at all times.
• Operators can now create smooth, flat or sloped surfaces
more easily when the excavator is placed in Autos mode.
• Operators are up to 30% more productive with 2D MC
excavator automatics compared to a 2D MG system.

7
 More Room,
Comfort and
Control For
Operators

The X4 Series offers the most advanced and roomiest cab in its
class. Comfortable, automotive-grade high-back seat with head
rest provides superior lumbar back support. With a longer
and wider seating surface, it reclines to a 155° maximum
reclining angle to create a relaxed environment during breaks.
Mechanical suspension is standard, with air suspension, seat
tilting adjustment and seat heaters available as options.
The cab layout also includes ergonomically-designed arm rests
that move with console, maintaining a constant distance between
joysticks and arm rests no matter how the seat is adjusted.
• Quiet, pressurized cab
• Joysticks with easy-to-hold grip and switches
• Handy ‘radio mute’ and one touch wiper switch
• Optional proportional joysticks w/auxiliary hydraulics control
• Cup holder and storage areas for cell phones and other
small items
• Dual halogen cab lights standard
• Full time rear camera display
• Optional RH & LH side cameras
• ROPS and FOPS Level 1 certified, optional FOPS Level 2
head guard available
• Optional LED lights use less energy and are 3X brighter!
• Optional retractable rear window shade
• Optional front sun visor
• Improved radio with USB port and Bluetooth for
hands-free communication.

8
 High-Definition LED monitor has a full-color 7” display
that rivals the resolution found in luxury automobiles.
Controls are easy to read and easy to use. The rear-
view camera activates automatically whenever the
machine is started, and sight guidelines have been
added for increased safety.
• Anti-glare coating on screen
• Track up to 14 service maintenance reminders
• System/machine warning messages
• Monitor SCR auto regeneration
• Select and set up attachments: 5 presets for
breakers; 5 presets for crushers
• In-cab pressure controls
• Anti-theft system
• Auto-adjusts for time and calendar
• 24 languages available

For the ultimate in visibility, X4 machines can be fitted with the Wide Angle Visual
Enhancement System - or WAVES for short. Using three closed-circuit cameras,
this optional viewing system provides an unbelievable 270° visual coverage
around the machine, eliminating any potential blind spots from the operator’s
line of sight. WAVES images can be displayed on the standard X4 monitor.

9
 Maintenance is a snap, with ground level access to all routine
service points, including batteries, fuel filters, engine oil filter,
dual-element air filter and cab fresh air filter.
• Radiator screens are easy to remove and clean from ground
level…no tools needed!
• A/C Condenser tilts for easy cleaning and maintenance
• Easy battery compartment access; 2 hand-turn knobs
• Improved battery disconnect switch with no keys needed
• Convenient ground-level sample ports in pump compartment
• Green drain plug and hose
• More data collection points
• Automatic door locking mechanism on side door
• Quick and easy access to grease all attachment
pivot points
• Grease cylinder track adjusters make adjusting track tension
a breeze
• New undercarriage side frame design enables easier
cleaning
• In-cab reminders track 14 different maintenance
procedures

10
Get Working Fast With Easy
Access to Service Points

• 24/7 Remote Monitoring

and Security
• Machine Location
• Geo-fence & Curfew Range
• Actual Fuel Consumption
• Fuel Levels
RemoteCARE® lets you remotely monitor and track machine location, operational • Hour Meter Reading
performance, working status and periodic maintenance requirements. It tracks and • Radiator Water Temperature
records both routine and major service intervals for your machines, giving you more • Machine Working Time/Idle Time
flexibility and control when scheduling maintenance procedures. It also lets you be • Attachment Working Hours
more proactive if potential failure conditions arise; whenever a diagnostic trouble • Working Modes
code (DTC) is detected, a warning message appears on the machine display, and an • Service Maintenance Reminders
e mail alert is automatically sent to you. RemoteCARE also assists in theft prevention • Service Warnings
by offering 24/7 surveillance and geofencing capabilities. • 6-yr. complimentary subscription

11
 Built Strong to Handle Anything
210 X4 machines are more rugged and durable, with robust structural improvements to the boom & arm structures, along
with improvements to lower frame and travel components.

Boom & Arm

• Improved boss shapes reduce stress on boom and arm pin
• Cast boom tip for increased reliability
• Stronger cylinder mounts

Lowers
• Thicker travel motor case - 8% increase
• Thicker plating between side frame and travel motor case -
14% increase
• Unique side-frame design reduces dirt accumulation and is
easier to clean.
• 52% wider idler hub

Customer Support
is Just a Call Away
A network of Link-Belt Excavator dealers across
the U.S. and Canada is waiting to serve you.
Expect fast and dependable service, backed by
24/7 access to parts.
Rock-Solid Warranty Coverage
All X4 machines are backed by a 3-year/3,000
hour Full Machine Warranty*, 3-year/5,000
hour Powertrain Warranty, 3-year/10,000 hour
XtraStructure Warranty, 5-year/3,000 hour
EPA Emissions Warranty and participation in
the X4 Fluids Analysis Program for the life of the
warranty. Extended warranty coverage packages
are also available.
*Applies to 2018 or newer serialized machines only.

12
Specifications
Engine Swing
Isuzu AR-4HK1X Final Tier 4 turbocharged diesel engine with electronic control Planetary reduction powered by axial-piston motor, Internal ring gear with grease
(ECM) and high pressure common-rail fuel injection, 4-cylinder, water-cooled, cavity for swing pinion, Swing bearing is single-row, shear type ball bearing,
Cooled Exhaust Gas Recirculation (CEGR), Intercooler, Variable-Geometry Mechanical disc swing brake, Auto-power swing.
Turbocharger (VGT), Diesel Oxidation Catalyst (DOC) and Selective Catalytic Swing Speed .........................................................................................11.5 rpm
Reduction (SCR) system with Dosing Control Module and heated DEF lines and Tail Swing ....................................................................................... 9′ 2″(2.79 m)
tank. Electronic fuel pump and priming, Fuel cooler, Auto-idle start, Auto warm-up, Swing Torque ................................................................47,200 lbf-ft (64.0 kNm)
EPF engine protection, dual-stage fuel filtration, remote oil filter, engine oil sample
port, green plug oil drain, double element air filter.
Undercarriage
SAE J 1349 net horsepower.............................160 hp (119.3 kW) @ 1,800 rpm
X Pattern carbody with 14′ 8″(4.47 m) LC long undercarriage by 7′ 10″(2.39 m) track
Displacement ............................................................................ 317 cu in (5.2 L)
gauge, Sealed and strutted track chain with track guide, Sealed rollers and idlers,
Maximum Torque............................................. 457 lbf-ft (620 Nm) @ 1,600 rpm
Two-speed independent hydrostatic travel with compact planetary final drive, Disc
Starter ...............................................................................................24V-5.0kW
type brakes, Adjustable track tension, Carbody belly pan.
Alternator.................................................................................................50 amp
Battery ..........................................................................(2) 12-volt 92 amp hours Carrier Rollers .................................................................................... 2 per Side
Track Rollers ...................................................................................... 8 per Side
Track Link Pitch ...........................................................................7.48″(190 mm)
Cab and Controls
Shoes ............................................................................................... 49 per Side
ROPS and FOPS Level 1 certified with automatic climate control A/C and heat with Shoe Width..................................................................................31.5″(800 mm)
defroster, 7″ LED Hi-Definition color monitor with full time rear view camera display, Ground Pressure............................................................... 4.93 psi (0.034 MPa)
fuel efficiency gauge, low-effort joysticks are pre-wired for auxiliary hydraulics, dual
cab lights, control pattern changer, safety glass windows, sunroof with sunshade, Travel System
shockless cab suspension with four fluid cab mounts, SCM High-Back reclining
suspension seat, sliding 4-position tilting control consoles, Bluetooth technology,Two-speed independent hydrostatic travel with compact axial-piston motors,
AM/FM sound system with USB and MP3 auxiliary input jack, digital clock, dome Hydraulic motor powered output shaft coupled to a planetary reduction drive
and track sprocket, All hydraulic components mounted within the width of side
light, seat belt, coat hook, cup holder, storage compartments, floor mat, footrests,
frame, Automatic downshift for high torque to overcome obstacles, Spring-applied
ashtray, 24V cigarette lighter, 12V outlet, travel alarm, handrails, mirrors, side-entry
cab filter, spare parts kit. hydraulic release parking brake built into each motor, Travel motors equipped with
counterbalance valve to prevent over-speeding down an incline.
Three selectable work modes, RemoteCARE Telematics GPS system, anti-theft Travel Speeds .......................................................2.1 - 3.5 mph (3.4 - 5.6 km/h)
password protection system, onboard self-diagnostic system with memory and Drawbar Pull......................................................................... 42,300 lbf (188 kN)
service interval reminders, auto idling system, one-touch decelerator, auto-idle Gradeability ........................................................................................ 70% (35°)
engine shutdown, auto-power boost, neutral safety start, gate-lock safety shutoff.
Attachment
Hydraulic System Boom .............................................................................................. 18′ 8″(5.70 m)
Open-center system, two variable-displacement electronically controlled axial- Available Arms Digging Force
piston pumps and one gear pump for pilot controls, main control valve with one • 9′ 8″(2.94 m) ......................................................................... 23,100 lbf (103 kN)
4-spool section and one 5-spool section with auxiliary spool: stackable, Auxiliary with Auto Power Boost ....................................................... 25,100 lbf (112 kN)
Control System, oil cooler, Auto-Power boost, boom and arm holding valves, 6 • 7′ 10″(2.40 m) ....................................................................... 27,600 lbf (123 kN)
micron return filter, firewall, hydraulic oil sample port. with Auto Power Boost ....................................................... 30,000 lbf (133 kN)
Hydraulic Pumps • Bucket Digging Force ........................................................... 31,800 lbf (142 kN)
Pump Output ............................................................... 2 x 55.7 gpm (211 L/min) with Auto Power Boost ....................................................... 34,600 lbf (154 kN)
Pilot Pump Maximum Flow....................................................4.8 gpm (18 L/min)
Relief Valve Settings Lubricant & Coolant Capacity
Boom/Arm/Bucket ............................................................. 4,970 psi (34.3 MPa) Fuel Tank ..................................................................... 108 Gallons (410.0 Liters)
in Power Boost .................................................................. 5,410 psi (37.3 MPa) Hydraulic System .......................................................... 66 Gallons (250.0 Liters)
Swing Circuit ..................................................................... 4,260 psi (29.4 MPa) Hydraulic Tank ............................................................... 39 Gallons (147.0 Liters)
Travel Circuit ..................................................................... 4,970 psi (34.3 MPa) Final Drive (per side) ........................................................ 1.3 Gallons (5.0 Liters)
Hydraulic Cylinders Swing Drive ...................................................................... 1.3 Gallons (5.0 Liters)
number of cylinders - bore x rod x stroke Engine Oil ....................................................................... 6.1 Gallons (23.1 Liters)
Boom ..................................................................................2 - 4.7″ x 3.3″ x 49.4″ DEF Tank .................................................................... 31.7 Gallons (120.0 Liters)
(120 mm x 85 mm x 1,255 mm) Coolant System .............................................................. 8.3 Gallons (31.4 Liters)
Arm ....................................................................................1 - 5.5″ x 3.9″ x 57.5″
(140 mm x 100 mm x 1,460 mm) Operating Weight
Bucket .....................................................................................4.7″ x 3.3″ x 39.8″ Working weight with 31.5″(800 mm) shoes, 18′ 8″ (5.70 m) boom, 9′ 8″(2.94 m)
(120 mm x 85 mm x 1,010 mm) arm, 1,435 lb. (651 kg) bucket, 8,640 lb. (3 920 kg) counterweight
.......................................................................................... 48,900 lbs. (22 200 kg)

13
 Working Range & Travel Dimensions
35 ft.
Machine Equipped with Arm Arm
9′ 8″ 7′ 10″
18′ 8″ (5.70 m) Boom (2.94 m) (2.40 m)
30
32′ 6″ 30′ 11″
A. Maximum reach (9.90 m) (9.42 m)
B. Maximum reach @ 31′ 11″ 30′ 4″
25
ground level (9.73 m) (9.24 m)
21′ 10″ 20′ 1″
C. Maximum dig depth (6.65 m) (6.11 m)
20
31′ 6″ 30′ 10″
D. Maximum dig height (9.61 m) (9.39 m)
D 22′ 4″ 21′ 7″
15 E. Maximum dump height (6.81 m) (6.59 m)
F. Digging depth 8′ (2.44 m) 21′ 3″ 19′ 4″
E level bottom (6.47 m) (5.90 m)
10

G. Bucket rotation 177° 177°

19′ 7″ 18′ 0″
5 H. Maximum vertical wall depth (5.96 m) (5.48 m)

30 25 20 15 10 5

-5

H -10
C F

-15

-20

-25 ft.
B
A

1 30′ 11″ (9.43 m) 2 31′ 2″ (9.51 m) 9′ 3″ (2.81 m)

4′ 10″ 4′ 5″
1 21′ 11″ (6.66 m) 2 22′ 2″ (6.74 m) 9′ 1″ (2.77 m)
(1.47 m) (1.34 m)
10′ 9″ (3.28 m)
2 10′ 5″ (3.19 m)

10′ 9″ (3.27 m)
9′ 9″ (2.98 m)

9′ 10″ (2.99 m)

(920 mm)

3′ 5″
1

3′ 0″

(1.05 m)
1′ 5″
(440 mm)
2′ 7″
Machine equipped with: 1.0″ (800 mm)
(26 mm)
1 9´ 8˝ (2.94 m) Arm
12′ 0″ (3.66 m) 7′ 10″ (2.39 m)
2 7´ 10˝ (2.40 m) Arm

14′ 8″ (4.47 m) 10′ 6″ (3.19 m)

14
Lift Capacities Radius of Load
9′ 8″ (2.94 m) Arm with 18′ 8″ (5.70 m) Boom and 1,450 lb. (650 kg) Bucket with Power-Boost Applied
5′ 0″ (1.5 m) 10′ 0″ (3.0 m) 15′ 0″ (4.5 m) 20′ 0″ (6.0 m) 25′ 0″ (7.5 m) 30′ 0″ (9.0 m) Cap at Max. Reach
End Side End Side End Side End Side End Side End Side End Side End Side
+25′ 0″ lbs 5,100* 5,100* 5,000* 5,000*
(7.5 m) kg 2 960* 2 960* 2 260* 2 260*
+20′ 0″ lbs 8,550* 7,850 4,750* 4,750*
(6.0 m) kg 3 940* 3 660 2 150* 2 150*
+15′ 0″ lbs 10,300* 10,300* 9,800* 7,600 5,700* 5,400 4,700* 4,700*
(4.5 m) kg 4 760* 4 760* 4 490* 3 550 3 180* 2 530 2 140* 2 140*
+10′ 0″ lbs 22,500* 22,500* 16,500* 16,350 12,700* 10,550 10,700* 7,300 8,300* 5,300 4,850* 4,850
(3.0 m) kg 10 500* 10 500* 7 670* 7 580 5 880* 4 900 4 930* 3 400 3 870 2 460 2 210* 2 200
+5′ 0″ lbs 20,300* 20,300* 20,550* 15,450 14,850* 9,950 11,000 7,000 8,150 5,100 5,200* 4,750
(1.5 m) kg 8 580* 8 580* 9 540* 7 180 6 860* 4 630 5 110 3 250 3 790 2 390 2 350* 2 150
Ground lbs 18,950* 18,950* 22,800* 14,600 15,200 9,500 10,700 6,700 7,650* 5,000 5,700* 4,900
Line kg 8 330* 8 330* 10 540* 6 780 7 080 4 410 4 970 3 130 3 730 2 330 2 600* 2 220
-5′ 0″ lbs 16,400* 16,400* 24,400* 24,400* 23,200* 14,350 14,950 9,250 10,550 6,600 6,650* 5,350
(1.5 m) kg 7 490* 7 490* 10 770* 10 770* 10 710* 6 660 6 960 4 300 4 910 3 070 3 010* 2 430
-10′ 0″ lbs 22,300* 22,300* 33,500* 28,750 22,550* 14,500 15,050 9,350 10,700 6,750 8,400* 6,350
(3.0 m) kg 9 960* 9 960* 14 770* 13 430 10 420* 6 730 6 990 4 340 4 980 3 130 3 790* 2 860
-15′ 0″ lbs 31,500* 31,500* 28,900* 28,750 19,900* 14,950 14,100* 9,850 11,850* 8,500
(4.5 m) kg 13 990* 13 990* 13 430* 13 390* 9 260* 6 940 6 630* 4 550 5 360* 3 790

Radius of Load
7′ 10″ (2.40 m) Arm with 18′ 8″ (5.70 m) Boom and 1,550 lb. (700 kg) Bucket with Power-Boost Applied
5′ 0″ (1.5 m) 10′ 0″ (3.0 m) 15′ 0″ (4.5 m) 20′ 0″ (6.0 m) 25′ 0″ (7.5 m) 30′ 0″ (9.0 m) Cap at Max. Reach
End Side End Side End Side End Side End Side End Side End Side End Side
+25′ 0″ lbs 8,700* 8,700* 7,400* 7,400*
(7.5 m) kg 3 510* 3 510* 3 340* 3 340*
+20′ 0″ lbs 10,250* 10,250* 9,400* 7,600 7,000* 6,750
(6.0 m) kg 4 670* 4 670* 4 320* 3 550 3 170* 3 020
+15′ 0″ lbs 13,600* 13,600* 11,300* 10,850* 10,450* 7,400 6,950* 5,700
(4.5 m) kg 6 320* 6 320* 5 240* 5 020 4 840* 3 460 3 140* 2 580
+10′ 0″ lbs 17,950* 16,250* 13,500* 10,300 11,100 7,150 7,150* 5,250
(3.0 m) kg 8 230* 7 530 6 240* 4 780 5 150 3 320 3 240* 2 370
+5′ 0″ lbs 21,300* 15,050 15,400 9,750 10,800 6,850 7,550* 5,100
(1.5 m) kg 9 810* 6 990 7 120* 4 530 5 040 3 180 3 430* 2 320
Ground lbs 17,000* 17,000* 23,100* 14,400 15,050 9,350 10,600 6,650 8,350* 5,300
Line kg 7 480* 7 480* 10 680* 6 680 7 010 4 340 4 920 3 080 3 780* 2 400
-5′ 0″ lbs 18,050* 18,050* 25,150* 25,150* 23,050* 14,300 14,900 9,200 10,550 6,600 9,400 5,900
(1.5 m) kg 8 040* 8 040* 11 120* 11 120* 10 640* 6 650 6 940 4 280 4 900 3 060 4 260 2 670
-10′ 0″ lbs 25,150* 25,150* 31,800* 29,000 21,850* 14,550 15,050 9,400 11,450 7,200
(3.0 m) kg 11 250* 11 250* 14 690* 13 510* 10 090* 6 770 7 000 4 360 5 140 3 230
-15′ 0″ lbs 25,950* 25,950* 18,100* 15,100 12,050* 10,200
(4.5 m) kg 12 080* 12 080* 8 460* 7 020 5 500* 4 530

Notes: Excavator lifting capacities

1. Lifting capacities shown should not be exceeded. Weight of all lifting 3. Lifting capacities shown do not exceed 75% of minimum tipping 6. Capacities apply only to the machine as originally manufactured
accessories must be deducted from the above lifting capacities. loads or 87% of hydraulic capacities. Capacities marked with an and normally equipped by LBX Company, LLC.
2. Lifting capacities are based on machine standing on firm, uniform asterisk (*) are limited by hydraulic capacities.
7. Lift capacity ratings are based on ISO 10567, “Earthmoving
supporting surface. User must make allowances for job conditions 4. Least stable position is over the side. Machinery - Hydraulic Excavators - Lift Capacity.”
such as soft or uneven ground. 5. Operator should be fully acquainted with the Operator’s Manual
& Operating Safety Booklet, furnished by LBX before operating
the machine.

15
Standard & Optional Equipment
CAB Travel Alarm with Cancel Switch ................S HYDRAULICS UPPERSTRUCTURE
Trip Meter (Digital) .............................................S
12V Power Outlet ...............................................S USB Input ................................................................S Arm Regeneration .............................................S Belly Pans................................................................S
270° WAVES™ Camera System ................... O Wiper & Washer ................................................S Arm Speed Assistance (2 Pump Flow) ....S Center Cover (Over Main CV) .......................S
AM/FM Sound System ...................................S Wiper Switch on RH Joystick .......................S Attachment Cushion Valve.............................S Fuel Tank Belly Pan ............................................S
Anti-Theft Device .................................................S Auto Swing Priority.............................................S Full-length Steel Triangulated Side Guards ...O
Auxiliary Switches on Control Lever ..........S ENGINE Auxiliary Flow Control ........................................S Hand Rail (RH access) .....................................S
Bluetooth.................................................................S 50A Alternator ....................................................S Auxiliary Tool Settings (Memory) ................S ISO Guard Rails ....................................................S
Cab Filter - External ............................................S 85A Alternator ....................................................O Auxiliary Valve .......................................................S Lifting Eyes for Counterweight .....................S
Cab Handrails .......................................................S Air Filter (Double Element) .............................S Boom Regeneration ..........................................S Lockable Fuel Cap and Service Doors ..........S
Cab Interior Light ................................................S Air Filter Restriction Indicator ......................S Boom Speed Assistance (2 Pump Flow)...S
Bucket Curl Assist ..............................................S Lockable Tool Box ...............................................S
Cab ISO-Mounts ...................................................S Air Pre-Cleaner (Cyclone type) .....................O
Control Levers Pre-Wired for Auxiliary Hyd. ... S Rubber Bumper Guards..................................O
Cab Light (2 LED) ................................................O Auto Warm-Up System ...................................S
Cab Light (2) ..........................................................S Control Pattern Changer (2 way) ...............S Turntable Tub........................................................S
Auto-Idle ...................................................................S Work Lights (Boom and Tool Box) .............S
Cab Sun Screen (rear) .....................................O Auto-Idle Engine Shutdown.............................S Electronically Controlled Hydraulic Pumps...S
Clear Roof Window ............................................S Battery Disconnect Switch ............................S Fire Wall ..................................................................S ATTACHMENT
Climate Control A/C and Heater ...............S CEGR (Cooled Exhaust Gas Recirculation)...S Free Swing..............................................................S
Holding Valve (Arm & Boom) ........................S 7’ 11” (2.40 m) Short Arm ...........................O
Cup Holder .............................................................S Cooling Fan.............................................................S 9’ 8” (2.94 m) Arm ............................................O
Defroster ................................................................S Diesel Oxidation Catalyst (DOC) ...................S Hose Burst Check Valve ..................................O
Hydraulic Filter Restriction Indicator ........S 18’ 8” (5.70 m) Main Boom Section...........S
Digital Clock ...........................................................S Drain for Fuel Tank .............................................S
Emergency Exit and Hammer.......................S Hydraulic Oil Sample Port ...............................S Auxiliary Pipe Brackets.....................................S
Dual Remote Fuel Filters with Boom Work Light ...............................................S
Face Vent ................................................................S Water Separators ..........................................S Long Life Hydraulic Oil (5,000 Hour) ........S
Floor Mat.................................................................S Neutral Pump De-Stroke.................................S Bucket Anti-Clatter Device .............................S
EGR Coolers...........................................................S Chrome Pins..........................................................S
FOPS Head Guard (Level 2) ...........................O Emergency Engine Stop...................................S Oil Cooler .................................................................S
FOPS Level 1 Certified ......................................S Engine Idle System .............................................S Power Boost..........................................................S Easy Maintenance System (EMS)...............S
Front Guard (Mesh) ...........................................O Engine Oil Sample Port.....................................S Power Save ............................................................S HD Bucket Linkage.............................................O
Front Guard (OPG 1,2) .....................................O Engine Protection Feature .............................S Pressure Reading on Monitor .....................S Quick Couplers .....................................................O
Front Window One-Touch Lock....................S External Fuel Gauge ...........................................S Proportional Hydraulic Controls..................O Remote Lube Bank ............................................S
Gate Lock Hydraulic Activation ....................S External DEF Gauge ...........................................S Pump Stand-By Pressure ...............................S Teardrop Pin Retention Keepers................S
Horn...........................................................................S Fan Housing...........................................................S Single Pedal Travel .............................................S Thumbs ....................................................................O
Hour Meter (Digital) ..........................................S Fuel Cooler .............................................................S Straight Travel Circuit.......................................S PARTS KIT
LED Color Monitor ..............................................S Fuel Filter Restriction Indicator ...................S AUXILIARY HYDRAULIC OPTIONS
LED Light Kit for Side Camera (1) ..............O Fuel Management System .............................S Bucket Anti-Clatter Device .............................S
LED Lights for Rear Camera (2) .................O Single-Acting Aux. w/ Proportional Joysticks....O Engine Manual ......................................................S
Fuel Shut-Off Valve ..............................................S Multi-Function Aux. w/ in-cab pressure
Magazine Storage Rack ..................................S Fuel Usage History .............................................S Engine Oil Filter .....................................................S
Maintenance Interval Reminders ...............S setting control ...................................................O Filter Wrench........................................................S
Fuel Usage Monitor ...........................................S Thumb Aux. w/ Proportional Joysticks ...O
MP3 Auxiliary Input Jack.................................S Glow Plug Pre-Heat ............................................S Combination Aux. w/ in-cab pressure Fuel Filters ..............................................................S
On-Board Diagnostic System ........................S Idle-Start ..................................................................S setting control ...................................................O Grease Gun ............................................................S
One-Piece Right Window.................................S Intercooler ..............................................................S Green Plug Drain Hose for Engine Oil Drain ...S
Radio Mute Switch .............................................S Neutral Start .........................................................S
UNDERCARRIAGE Hydraulic Return Filter .....................................S
Rain Deflector.......................................................O One-Touch Idle ......................................................S 600 mm (23.5” in) 3-Bar Steel Grousers...O Ignition Keys...........................................................S
Rear View Camera.............................................S Passive Emissions Regeneration................S 700 mm (27.5” in) 3-Bar Steel Grousers..........O Pilot Circuit Hydraulic Filter ...........................S
Rear View Mirrors (2) ......................................S Radiator / Oil Cooler / Intercooler 800 mm (31.5” in) 3-Bar Steel Grousers..........S Rearview Mirrors................................................S
RemoteCARE Support System (GPS).......S Protective Screen............................................S Carbody Belly Pan (Swivel Guarding) .............S Work Light for Boom ........................................S
Roof Sun Shade ...................................................S Refuel Pump ..........................................................O Center Track Guide (single).................................S
ROPS Certified Structure ...............................S Remote Engine Oil Drain .................................S Center Track Guide (triple) .................................O
Safety Glass Windows......................................S Remote Oil Filter ..................................................S Lashing Points (Tie-Downs) .................................S
SCM Air-Suspension Seat with Tilt & Heater ...O Reversible Cooling Fan .....................................O Long Undercarriage................................................S
SCM Suspension Seat......................................S Selective Catalytic Reduction (SCR) ..........S Sealed Link Chain ......................................................S
Seat Recline...........................................................S Tropical Package.................................................O Steps.................................................................................S
Selectable Monitor Languages....................S DEF Gauge on Monitor.....................................S Strutted Track Chain ..............................................S Equipment Key
Small Storage .......................................................S VGT Turbocharger .............................................S X-Pattern Carbody....................................................S Standard - S Optional - O

Bucket Sizes

SAE Width Bucket Number Arm Length Approval Code For

Bucket Heaped Capacity Outside Lip Weight 9′ 8″ 7′ 11″
of Arm/Bucket Combinations
Type (yd ) 3
(m ) 3
(in) (mm) (lbs) (kg) 2.94 m 2.41 m
Teeth H........................Heavy material
0.65 0.50 24 610 1151 522 4 H H (up to 3,370 lbs./yd3)
0.87 0.67 30 762 1265 574 4 H H
STDP 1.09 0.83 36 914 1433 650 5 H H
M ......................Medium material
Standard (up to 2,700 lbs./yd3)
duty plate 1.31 1.00 42 1067 1570 712 5 M H
1.53 1.17 48 1219 1687 765 5 L M L ......................... Light material
1.75 1.34 54 1372 1853 841 6 L L (up to 2,020 lbs./yd3)
0.64 0.49 24 610 1392 631 3 H H N/A .....................Not applicable
0.85 0.65 30 762 1592 722 4 H H
HDP 1.07 0.82 36 914 1794 814 5 H H
Heavy
duty plate 1.29 0.99 42 1067 1954 886 5 M M
1.51 1.15 48 1219 2114 959 5 L M
1.72 1.32 54 1372 2315 1050 6 L L
0.64 0.49 24 610 1549 703 3 H H
0.85 0.65 30 762 1769 802 4 H H
XDP 1.07 0.82 36 914 1933 877 4 H H
Extreme
duty plate 1.29 0.99 42 1067 2152 976 5 M M
1.51 1.15 48 1219 2316 1051 5 L M
1.72 1.32 54 1372 2536 1150 6 L L
POWER 0.61 0.47 24 610 1956 887 4 H H
HDP for use 0.80 0.61 30 762 2102 953 4 H H
with ESCO 0.99 0.76 36 914 2287 1037 5 H H
multi-pin 1.18 0.90 42 1067 2433 1104 5 M M
grabber only 1.38 1.06 48 1219 2578 1169 5 L M
1.08 0.83 60 1524 1470 667 0 H H
DITCH 1.20 0.92 66 1676 1557 706 0 H H
1.32 1.01 72 1829 1648 748 0 M H

Litho in USA 7/18 #LBX2390 supersedes #LBX2346

LBX® and Link-Belt® are registered trademarks. Copyright 2018. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.