Scribd
Upload
58 views2 pages

Wireless Electronic Notice Board Using GSM

This document describes a wireless electronic notice board project using GSM technology. The project uses a PIC18F4550 microcontroller connected to a SIM800A GSM modem to send notices from a mobile phone via SMS to a 16x2 LCD display. Notices can be updated remotely via SMS without needing to physically change the display, providing a convenient way to update public notices at locations like bus and train stations.

Uploaded by

Vishal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
58 views2 pages

Wireless Electronic Notice Board Using GSM

This document describes a wireless electronic notice board project using GSM technology. The project uses a PIC18F4550 microcontroller connected to a SIM800A GSM modem to send notices from a mobile phone via SMS to a 16x2 LCD display. Notices can be updated remotely via SMS without needing to physically change the display, providing a convenient way to update public notices at locations like bus and train stations.

Uploaded by

Vishal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Abstract

Wireless Electronic Notice Board using GSM


We know the importance of notice boards in public places like railway stations, bus stations and
airports. But changing notices day-to-day is a difficult task. This article explains you how to
design a Wireless Electronic Notice Board using GSM technology. The project displays the data
on LCD whatever we sent from the mobile.

The Wireless Electronic Notice Board using GSM project, as the name suggests, is built around
GSM Technology as mobile phones (that communicate through GSM Technology) have become
very abundant, cheap and easy to use.

Components:

 Ic : Pic 18f4550
 SIM 800A GSM MODEM (GSM Module)
 SIM Card (for inserting in GSM Modem)
 A mobile phone with a SIM Card already inserted
 16 x 2 LCD Display
 10 KΩ Potentiometer
 Connecting wires
 Power Supply
 Max232
 Bridger rectifier
 If 8051 Development Board is not available, then you need the following components
 2 x 10 KΩ Resistors (1/4 Watt)
 2 x 33pF Ceramic Disc type Capacitors
 Push Button
 10µF / 16V Capacitor (Polarized)
 0592 MHz Quartz Crystal

 We also require
1) PCB Board
Block diagram :

 We also require
1) PCB Board

Crystal Pic18f45 Lcd


oscillator
50 display

Sim
800A

You might also like